Good day Sirs!
Please help me, yesterday i try to install PhilZ Touch.img using Flashify. installation went ok, but when ask to reboot, only shows acer's logo and after 5secs turn off, try Power + Vol up for recovery, shows the option for SD IMAGE, FASTBOOT, CLEAN. when i click any of that device will shutdown. tried also flash tools. but when i connect my device computer will start to recognize the tablet but after 2 seconds it will shutdown, flash tools will halt.
is anyone know how or what can i do to flash the tablet.
tablet: Acer Iconia B1A71
F/W : RV05RC05
JB 4.1.2
Thanks
Same problem here friend, please someone could help?
Rafael Bzinho said:
Same problem here friend, please someone could help?
Click to expand...
Click to collapse
I tried to search everywhere but no luck, go on shop the tech says i need to change motherboard, but i say no., the price of the motherboard is almost same price of a second hand acer Iconia B1-721. so better get a second hand one with 1Gb of RAM than changing Motherboard same price with 512Mb RAM. Goodluck to you.
Related
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
It's dead. Now go and get a Nexus 7.
scream4cheese said:
It's dead. Now go and get a Nexus 7.
Click to expand...
Click to collapse
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have d same tablet n same problem.... do u know how to flash it completely.... and wer can i find firmware for this tablet????
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
annur said:
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
Click to expand...
Click to collapse
I have modified a firmware image for my tablet that works. When i find the time i will upload it
and post the link in order for you to try it. I had similar problem but i found an image that almost worked.
I had shifted screen, g-sensor worked and touch screen sort of worked.
When image is up, check it out. It might work for you too.
Update : here is the link to the modified firmware that suited my tablet : http : / / uploading.com/423e8db1/a13test-7z
Sorry for breaking the rules with the link. (you can assemble it i believe)
Hope this is what you were looking for. Enjoy!
Dead android tab
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Dear friend,
I have the same problem that my wintouch Q75S tablet was dead after I flashed wrong ROM using live suite 1.05.
Please help me if you found any solution.
Thanks,
Lakmal
behnam59 said:
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
Click to expand...
Click to collapse
I get the same problem, just one stuff, you don't have to remove the battery, just power on the tablet even don't see any thing and just wait until the battery is empty, and use livesuite to flash your tablet normally.
wish it will help
:crying::crying::crying:
It is motherboard problem due to dirty Flashing
Now motherboard need to repair
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
This is my problem, My friend bought a tablet and wanted to install the cyanoagenmod 10, I try to boot into recovery or donwload but none worked, I could not enter any, but the tablet was root, so with an application called novo, try installing the recovery officer first, then I reboot and go into recovery but volum buttons+ and volum- did not change the options, then thinking it would work, I install CWM, I reboot and brick the tablet in samsung logo, then I saw that was Chinese, now this is my question, as I can unbrick, I still can not get into recovery mode or download, as I saw in some forums unbrick some terminals, dissambled and bridge between two contacts, and saw that my friend's tablet had but I'm not sure, or there will be another method to solve it, reflashing from pc otherwise entering, or repairing the boot from the hardware,
I think it is because the boot is damaged, because so was in perfect condition before installing the recovery.
my friend said that the model of the tablet not say p1000, it's say TWD_WID
helpme please with this problem, thanks
Hi, i have tablet Prestigio Multipad 7.0 HD with model name PMP3970B_DUO. When i tested root device with ZhuoDashi 2.3.9, program at 75% fail , because tablet stuck. I´m reset tablet with PWR button. When I turn on tablet, still with starting logo. When I start tablet wit PWR and VOL+ (recovery menu), nothing happens and still with starting logo. When the tablet connects to the PC with PWR and VOL-, PC finds him as an unknown device. Charging works normally.
Tablet is therefore in a state of half-brick. Does anyone have an idea as to how to go back to its original state?
System: Android JB 4.1.1 build: PMP3970B-20130505_v1.0.7.
EDIT: When I connect the tablet to a PC with the VOL-and joins as M3 Chip, when I World_Cup driver for AML flash, but I do not FW, which I'd recorded, if anyone should IMG file, it should go over to fix it. Unfortunately, this is a new device and on the web Prestigio is a rear-FW download.
Nothing? And when I have second this tablet with root, when I save ROM with this?
Sorry, my english is bad.
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Hangman07 said:
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Click to expand...
Click to collapse
Have you got any luck with fixing?
Similar thing happened to me, and i ended up using aml flash tool (it failed at 53%).
After that, i was able to get into recovery but updating with fw from prestigio site didn't help.
It starts upgrading process over and over...
Same problem
Pls help!
Only service. In service find HW error...
I was trying to install Chainfire 3D and I guess I did something wrong because I'm now stuck in a boot loop.
I have a Proscan PLT9045k tablet rooted. I was running a stock rom and kernel. Whenever I try to boot it up now it just freezes on the Proscan logo, I can't even make it to the Android boot screen.
Can anyone help?
SpaceNigs said:
I was trying to install Chainfire 3D and I guess I did something wrong because I'm now stuck in a boot loop.
I have a Proscan PLT9045k tablet rooted. I was running a stock rom and kernel. Whenever I try to boot it up now it just freezes on the Proscan logo, I can't even make it to the Android boot screen.
Can anyone help?
Click to expand...
Click to collapse
remove the battery, and reinsert , enter recovery mode and wipe all and reboot,
Solved
droidinterest said:
remove the battery, and reinsert , enter recovery mode and wipe all and reboot,
Click to expand...
Click to collapse
if you are able to go to recovery mode in your device just wipe data and cache every thing will be solved and if you are not able to go to recovery mode just install stock rom of your device.......
press thanks if i helped
rahulraz said:
if you are able to go to recovery mode in your device just wipe data and cache every thing will be solved and if you are not able to go to recovery mode just install stock rom of your device.......
press thanks if i helped
Click to expand...
Click to collapse
I've tried that multiple times and I'm still stuck on the boot loop. And looking online I could only find a .img of the firmware for my tablet. It's hard to find any support at all for this model.
how I fixed my proscan tablet
I know this is super old but I hope this helps someone someday,
I bricked a proscan (made by curtis international) tablet, I found the proper firmware on the legacy.curtisint (dot) com/support/manuals.asp?p=15 web page
after unzipping all the contents and the zip file that is in the main folder I connected the tablet to the PC via USB with the power to the tablet off
look for RKbatchtool.exe in the batch tool folder, load the *.img file in the main folder in that program, below there will be many greyed out boxes numbered 1-8 iirc
press and hold the power button on the tablet until you hear the USB insert sound from your computer (the screen will stay black but it has turned on to the firmware loading function)
in the RKbatchtool program one of the greyed out boxes at the bottom should now be green or flashing and allow you to properly reload the firmware
let it run and it will auto complete and tell you when completed.
It doesn't cost the manufacture proscan to keep 'copy' of their old firmware stored at google or their own webserver, it's either they don't care about buyers who have issues with the firmware or software as it has bugs and the device is 'disposable' as they sell it for like $50. It's obviously not worth their time investing money on technical support for a product with so little profit. the company didn't even bother to leave digital copy of their manual or firmware for 'free' downloand and no technical support for their product and customers have to come here for 'free technical support' which is bogus.
these 'cheap' disposable tablets have self destruct mechanism if you reset to factory or try to flash it too many times,,just kidding or crap cheap tablets with technical support cause they want to give any technical support. and don't care as it's disposable. cheap garbage.
technical support is the job of the guy who made the stuff not for sites like this or third party websites.
The problem is the battery is too low to bootup. and there is not enough charge to load the android software. it only has enough battery to boot up stage. and when battery is low it shuts down. Plug the usb charger and fully charge the battery for 5 hours. If your battery was drained to 0% and you have not used it for months, you need to charge the batter for at least 6 hours to fully charge it.
it worked for me. and never use the battery to 0%. and not recharge it. always recharge the battery when it reaches say 10%
there is no need to flash the firmware or even reset it etc.
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.