Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
It's dead. Now go and get a Nexus 7.
scream4cheese said:
It's dead. Now go and get a Nexus 7.
Click to expand...
Click to collapse
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have d same tablet n same problem.... do u know how to flash it completely.... and wer can i find firmware for this tablet????
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
annur said:
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
Click to expand...
Click to collapse
I have modified a firmware image for my tablet that works. When i find the time i will upload it
and post the link in order for you to try it. I had similar problem but i found an image that almost worked.
I had shifted screen, g-sensor worked and touch screen sort of worked.
When image is up, check it out. It might work for you too.
Update : here is the link to the modified firmware that suited my tablet : http : / / uploading.com/423e8db1/a13test-7z
Sorry for breaking the rules with the link. (you can assemble it i believe)
Hope this is what you were looking for. Enjoy!
Dead android tab
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Dear friend,
I have the same problem that my wintouch Q75S tablet was dead after I flashed wrong ROM using live suite 1.05.
Please help me if you found any solution.
Thanks,
Lakmal
behnam59 said:
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
Click to expand...
Click to collapse
I get the same problem, just one stuff, you don't have to remove the battery, just power on the tablet even don't see any thing and just wait until the battery is empty, and use livesuite to flash your tablet normally.
wish it will help
:crying::crying::crying:
It is motherboard problem due to dirty Flashing
Now motherboard need to repair
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Related
Hi, i have tablet Prestigio Multipad 7.0 HD with model name PMP3970B_DUO. When i tested root device with ZhuoDashi 2.3.9, program at 75% fail , because tablet stuck. I´m reset tablet with PWR button. When I turn on tablet, still with starting logo. When I start tablet wit PWR and VOL+ (recovery menu), nothing happens and still with starting logo. When the tablet connects to the PC with PWR and VOL-, PC finds him as an unknown device. Charging works normally.
Tablet is therefore in a state of half-brick. Does anyone have an idea as to how to go back to its original state?
System: Android JB 4.1.1 build: PMP3970B-20130505_v1.0.7.
EDIT: When I connect the tablet to a PC with the VOL-and joins as M3 Chip, when I World_Cup driver for AML flash, but I do not FW, which I'd recorded, if anyone should IMG file, it should go over to fix it. Unfortunately, this is a new device and on the web Prestigio is a rear-FW download.
Nothing? And when I have second this tablet with root, when I save ROM with this?
Sorry, my english is bad.
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Hangman07 said:
so I managed to put into operation recovery menu, tablet into it after i turn restartne, I just needed to upload a ROM, could anyone advise me?
Click to expand...
Click to collapse
Have you got any luck with fixing?
Similar thing happened to me, and i ended up using aml flash tool (it failed at 53%).
After that, i was able to get into recovery but updating with fw from prestigio site didn't help.
It starts upgrading process over and over...
Same problem
Pls help!
Only service. In service find HW error...
i have an allwinner a10 tablet its logicom tab1050 at first it was stuck on boot i flashed with its original firmware after the flash the tablet started but the tactile didn't work i used a usb mouse to check whats working every thing else was working only the tactile then i found this Allwinner A10 A13 Tablet Touch Fixer by UnitedGSM. it seemed like a solution i turned on debug mode and plugged it i tested the program the tablet went off and never back on :crying: the computer cant recognize it it wont start only one thing that works is the red light when the charger is plugged
please help me and sorry for my English
When i plug the charger there is heat in the cpu and thats it
update the tablet now works fine
all i did is create a short between +and- in the battery and its back on
Hey guys
The problem is that whenever i turn on the tablet it turns on and stuck on the boot logo which the brand name of this tablet and never skip through it , as i tried to enter the recovery mode by pressing the combination keys but no succeed , used "Android multi tool " software , connected the tablet to the PC and tried to use the software but it says that there is no device connected and the device manager has identified it as "Android ADB Interface" , i have searched a lot about "entering the recovery mode" for this brand everywhere but with no luck :crying:
it's brand "Compu Tab BY-7071" but seems to be unknown brand unfortunately, so i managed to open the back cover and to get the CPU's brand , it's "Allwinner Tech A23" and i attached some images below.
i have tried almost everything but with no luck !
is there any way left to restore this dead tablet ?
maybe if i try to disconnect the battery from the circuit board for a while to discharge will work ?
by the way the problem started when i rebooted the tablet into the Boot Loader from the TWRP app i have it installed from the google play store .
Please guys help me , Thanks very much
love XDA-Developers
Good day Sirs!
Please help me, yesterday i try to install PhilZ Touch.img using Flashify. installation went ok, but when ask to reboot, only shows acer's logo and after 5secs turn off, try Power + Vol up for recovery, shows the option for SD IMAGE, FASTBOOT, CLEAN. when i click any of that device will shutdown. tried also flash tools. but when i connect my device computer will start to recognize the tablet but after 2 seconds it will shutdown, flash tools will halt.
is anyone know how or what can i do to flash the tablet.
tablet: Acer Iconia B1A71
F/W : RV05RC05
JB 4.1.2
Thanks
Same problem here friend, please someone could help?
Rafael Bzinho said:
Same problem here friend, please someone could help?
Click to expand...
Click to collapse
I tried to search everywhere but no luck, go on shop the tech says i need to change motherboard, but i say no., the price of the motherboard is almost same price of a second hand acer Iconia B1-721. so better get a second hand one with 1Gb of RAM than changing Motherboard same price with 512Mb RAM. Goodluck to you.
hi i was doing this
and i followed everithing but in the part that i select reboot it restarts, get to the "samsung" text and then power off, then i tried to start it up with the power button but it not respond, even connecting it to my pc doesnt work. i cant go back to stock rom because i cant boot into recovery.
download and recovery mode not working, it doenst even show the samsung text or something. the screen doesnt react.
do you solved your problem ?
I got a same problem, bro. i changed rom several times. more then 10 custom i've tried, and the dead boot a10 got after trying installing pixel experience 11. my a10 A105G real dead boot. pc cannot recognising, and of course odin can not indentifying port.
Lucky for me, I tried to open the case, release battery connection. and reconnectthe battery. amazing. i try to enter download mode.... and... its work for me.
hope some ppl like us can find good solution for the dead boot A10 aftertry installing a costum rom.