Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
It's dead. Now go and get a Nexus 7.
scream4cheese said:
It's dead. Now go and get a Nexus 7.
Click to expand...
Click to collapse
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have d same tablet n same problem.... do u know how to flash it completely.... and wer can i find firmware for this tablet????
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
annur said:
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
Click to expand...
Click to collapse
I have modified a firmware image for my tablet that works. When i find the time i will upload it
and post the link in order for you to try it. I had similar problem but i found an image that almost worked.
I had shifted screen, g-sensor worked and touch screen sort of worked.
When image is up, check it out. It might work for you too.
Update : here is the link to the modified firmware that suited my tablet : http : / / uploading.com/423e8db1/a13test-7z
Sorry for breaking the rules with the link. (you can assemble it i believe)
Hope this is what you were looking for. Enjoy!
Dead android tab
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Dear friend,
I have the same problem that my wintouch Q75S tablet was dead after I flashed wrong ROM using live suite 1.05.
Please help me if you found any solution.
Thanks,
Lakmal
behnam59 said:
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
Click to expand...
Click to collapse
I get the same problem, just one stuff, you don't have to remove the battery, just power on the tablet even don't see any thing and just wait until the battery is empty, and use livesuite to flash your tablet normally.
wish it will help
:crying::crying::crying:
It is motherboard problem due to dirty Flashing
Now motherboard need to repair
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Hello everyone,
I recently received an Innovatek Inno Pad 10 (chinese android tablet) as a gift and the problem is that the tablet does not boot up. When I got the tablet and turned it on, it showed me an android bootloader screen and then it brought me to the android logo boot screen where it would basically go into an infinite boot sequence. I have tried charging it fully and then turning it on, I have tried un-plugging the battery and plugging it back in. I even tried re-flashing the firmware on the device using a software supplied by the company (it was very hard to find and the company's support is not that great). The flashing process was completed successfully but the tablet would still go into an infinite boot loop (I even tried re-flashing it again with no luck). Here is the worst part, there was a u-boot-nand.bin file included with the program and I decided to try and flash the tablet using that file. Now the tablet's screen won't even turn on, but the power and charge buttons still light on. I think the bootloader got messed up. Does anybody have an idea how to get this tablet working? I have posted pictures of the tablet and its specs.
Thanks
John
Hi,
i have a problem with my ceiwei A6 android projector.
One day i turned it on and it stuck on the android logo and turn off.
I tried to connect the projector with male/male USB cable to my computer and find it with adb but this doesn`t work.
Like on android phones i pressed different keys to get into the recovery mode but this also doesn`t work.
Maybe someone can help me to get into the recovery mode or has a firmware for me.
On the mainboard is a ARM MSD6A348ATT CPU maybe this help.
Thanks.
The history of the tablet
My father bought this tablet to use as a GPS navigation, but the dalvik chache is filled up completly so the tablet can't boot. So we took it back to the person whom we bought it and he reinstalled the operating system on it, but the main issue is left unresolved. That was about 5-6 years ago. After some months I read about this topic and I figured out how can I clear the dalvik-chache my self, but I can't solve the issue permanently. I left the tablet on the shelf for years, and now I want to completly repair the tablet. (My main purpose with this is to learn how these things work.) But now I can't wipe the dalvik chache with DDMS because it doesn't recognize the device.
From the tablet
The tablet is a Navon Platinum Explorer (which is not a Navon tablet) and there is another tablet called Evolio Evotab Fun wich is almost the same.
Specifications
OS: Android 4.0
Screen: 7 inch TFT LCD capacitive tuch screen, 800x480 pixels
CPU: 1,2GHz, Cortex A8
GPU: Mail-400 ghraphical cpu
Symptoms
When I simply turn on it displays the android logo and stuck there.
If I press [Vol Up]/[Vol Down] + [Power] it connects or if already connected to the PC it disconnects and doesnot display anything.
Windows 10 doesn't see the device, but the Oracle VM shows as an USB device with name: Onda (unverified) V972 tablet in flashing mode
I stuck at
finding a boot.img that I can try to flush on the device, but I also don't know that this is possible because nothing recognize the tablet (I tried with fastboot, adb and ddms).
My goal with this tablet is
1. Fix the bootloop, so the device can start
2. Install some kind of Linux on it
So I was searching downstairs one day and I came across a tablet that my brother apparently bricked trying to apply Clockwork mod to it or something he said. Now this wouldn't be so much an issue if he made a backup of the stock firmware. I'm working with a Mediatek ZL10 tablet board model ZL10-MB1.2 and its currently stuck in bootloop. I can get it to go to boot mode by holding volume up and home for a few seconds but it only gives me a few options. Recovery, fastboot, and normal. Can't seem to connect it to my pc either long enough to do anything with adb though at least my pc detects it for a split second.
If someone could provide a stock rom for a Mediatek ZL10 tablet board model ZL10-MB1.2 that would be great as I haven't had much luck finding a download for it any where. Not sure what I'll do afterwards really but its not like I can currently do anything without fixing this bootloop.