Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
It's dead. Now go and get a Nexus 7.
scream4cheese said:
It's dead. Now go and get a Nexus 7.
Click to expand...
Click to collapse
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have d same tablet n same problem.... do u know how to flash it completely.... and wer can i find firmware for this tablet????
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
annur said:
without Stock ROM from the seller it would be (almost) imposible to find the right driver for your tablet,
if it still under waranty ,than i would suggest returning it,if not or you don't want to wait for help from the (re)seller, why not crack the case open and see what's inside it.
It should give some info about the hardware (TS controller, G sensor etc) that your tablet is using
PS:
I googled around for mid A13 Q88 and came up with a loot of result,
Click to expand...
Click to collapse
I have modified a firmware image for my tablet that works. When i find the time i will upload it
and post the link in order for you to try it. I had similar problem but i found an image that almost worked.
I had shifted screen, g-sensor worked and touch screen sort of worked.
When image is up, check it out. It might work for you too.
Update : here is the link to the modified firmware that suited my tablet : http : / / uploading.com/423e8db1/a13test-7z
Sorry for breaking the rules with the link. (you can assemble it i believe)
Hope this is what you were looking for. Enjoy!
Dead android tab
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
Dear friend,
I have the same problem that my wintouch Q75S tablet was dead after I flashed wrong ROM using live suite 1.05.
Please help me if you found any solution.
Thanks,
Lakmal
behnam59 said:
Not Dead yet...
I removed battery and Pushed the power button rapidly.... when all saved power on board is gone. I placed the battery again.
then connect the usb cable, Pc found the tablet... and with LiveSuite I install the above file and fixed the problem
but touch still dosnt work...
Click to expand...
Click to collapse
I get the same problem, just one stuff, you don't have to remove the battery, just power on the tablet even don't see any thing and just wait until the battery is empty, and use livesuite to flash your tablet normally.
wish it will help
:crying::crying::crying:
It is motherboard problem due to dirty Flashing
Now motherboard need to repair
behnam59 said:
Hey Guys,
Tablet Model: MID-A13 (Q88)
I'v tried to slove some problem on my tablet... the file I have used is "Android for A13 allwinner 4.0.4"
and install this with LiveSuite... succesfull. but the camera, touch, and G sensor is dos'nt work...
So I'v tried to install the "907c_compatibility_1.2.0" to slove that problem.
when I installed this from recovery menu and reboot the device... tablet completely dead....!!!
and now when I push power button nothing happen to device... no power on... no boot... no logo.. nothing....
and even connect the usb cable to pc... noting happened... or connect the Charger is not showing up the battey logo on screen.
I opened the device and touch the A13 Proccessor, is still warm...
what happened???????????
what can I do....????????
Please Heeeeelp !!!!!
Click to expand...
Click to collapse
i have an allwinner a10 tablet its logicom tab1050 at first it was stuck on boot i flashed with its original firmware after the flash the tablet started but the tactile didn't work i used a usb mouse to check whats working every thing else was working only the tactile then i found this Allwinner A10 A13 Tablet Touch Fixer by UnitedGSM. it seemed like a solution i turned on debug mode and plugged it i tested the program the tablet went off and never back on :crying: the computer cant recognize it it wont start only one thing that works is the red light when the charger is plugged
please help me and sorry for my English
When i plug the charger there is heat in the cpu and thats it
update the tablet now works fine
all i did is create a short between +and- in the battery and its back on
Hello,
I have a tablet that looks similar to Q88 A13. CPU is wm8801, OS - Android 4.1. So I had stopped using it and left it sit for like 1 year. Now I charged it and tried to turn on, but it wouldn't get past first logo(the one that appears first, not the os loading one) and would attempt to go into recovery itself, but then the android with exclamation mark would appear for a while and then device would reboot and so on and so on...
Then I triggered a hard reset with a button combo, but it didn't really help. Tablet stopped trying to go into recovery and simply kept getting stuck at logo.
I can't access recovery, and neither ADB nor fastboot is working. PC with win 7 reports it as unrecognized device and other PC with win xp doesn't even see that anything is connected to it.
I've tried unsoldering the battery, completely discharging tablet without it, soldered it back on, but didn't help.
Help?
bump
Try Livesuit 1.11.
I've used it to load several ROM's
I'm currently running FaaastJB v2.5 found at http://forum.xda-developers.com/showthread.php?t=2447819
How to reset NAND/CMOS on board?
Hi. I tried to update bios, because accidentally disabled usb an cant get into bios. In DNX bios update process my tabled asked for confirmation, but i can confirm, because no worked usb. In the end my tablet won't turn on. After turning on, CPU get hot, but nothing shows up, no light, no display.
I really need to know how to do this as well. Is there a possible way to do this, anyone? I believe I've messed up the boot display so it's trying to boot on the micro HDMI instead of the inbuilt display.
@aleksanmi Were you able to figure out a fix?
So I was searching downstairs one day and I came across a tablet that my brother apparently bricked trying to apply Clockwork mod to it or something he said. Now this wouldn't be so much an issue if he made a backup of the stock firmware. I'm working with a Mediatek ZL10 tablet board model ZL10-MB1.2 and its currently stuck in bootloop. I can get it to go to boot mode by holding volume up and home for a few seconds but it only gives me a few options. Recovery, fastboot, and normal. Can't seem to connect it to my pc either long enough to do anything with adb though at least my pc detects it for a split second.
If someone could provide a stock rom for a Mediatek ZL10 tablet board model ZL10-MB1.2 that would be great as I haven't had much luck finding a download for it any where. Not sure what I'll do afterwards really but its not like I can currently do anything without fixing this bootloop.