So I was searching downstairs one day and I came across a tablet that my brother apparently bricked trying to apply Clockwork mod to it or something he said. Now this wouldn't be so much an issue if he made a backup of the stock firmware. I'm working with a Mediatek ZL10 tablet board model ZL10-MB1.2 and its currently stuck in bootloop. I can get it to go to boot mode by holding volume up and home for a few seconds but it only gives me a few options. Recovery, fastboot, and normal. Can't seem to connect it to my pc either long enough to do anything with adb though at least my pc detects it for a split second.
If someone could provide a stock rom for a Mediatek ZL10 tablet board model ZL10-MB1.2 that would be great as I haven't had much luck finding a download for it any where. Not sure what I'll do afterwards really but its not like I can currently do anything without fixing this bootloop.
Related
Hi,
I just managed to birck my phone, an Allview P5 Alldro.I had previously rooted it and installed a custom Android 4.2.2 ROM.I wasn't happy with it's battery efficiency so i decided to go back to the official 4.0.4.All went good with a flashing tool but after the flash tool had the green circle that it was all done, the phone was dead.
Nothing works, cant make it normal start (power button), nor does recovery work (volume - and power).
Even tried plugging it in the PC and it won't get recognised, as in new hardware, in both Windows 7 x64 nor Ubuntu 13.10.Tried some Ubuntu tools that even checked the USB voltages and power that was sent through them and it didn't detect it.Nor does it do anything when plugged in the electric socket.
Just, a brick...
I read about a JIG tool used on Samsung smartphones, might it work on mine too?
The phone is just 3 months old.
hello everyone
this phone is NOWHERE... i cant believe how few people have this phone in the hacking community.
I've used a guide seen here
https://www.youtube.com/watch?v=BCiq21WsFEc
essentially I rooted it in KK successfully. Then I installed TWRP through the twrp app... installed successfully. no error.
Went to reboot, phone does not get past splash. Recovery instantly goes to black (powered off) screen with red LED (tells me the phone is kind of on.. but some serious hardware misunderstanding taking place.)
How can I restore the stock recovery? While it is in this no-display-red-light mode it appears on my computer in DFU... so I know it is possible to still get in there, but I cannot find anything about the stock recovery for this phone.
Can't believe ZTE has little to no support for this phone...
Possible solution
That video seemed to be for the newer model of the zte grand x, thats why its called grand x plus. I had tried it on my phone and it was like stuck in a power up loop, what i did to get out of it is to go into recovery mode by pressing and hold the power button plus the up volume button. One i got in there i just rebooted it. Try that out and see if it works. Im still looking around for a solid root for this phone
Hello,
I have a tablet that looks similar to Q88 A13. CPU is wm8801, OS - Android 4.1. So I had stopped using it and left it sit for like 1 year. Now I charged it and tried to turn on, but it wouldn't get past first logo(the one that appears first, not the os loading one) and would attempt to go into recovery itself, but then the android with exclamation mark would appear for a while and then device would reboot and so on and so on...
Then I triggered a hard reset with a button combo, but it didn't really help. Tablet stopped trying to go into recovery and simply kept getting stuck at logo.
I can't access recovery, and neither ADB nor fastboot is working. PC with win 7 reports it as unrecognized device and other PC with win xp doesn't even see that anything is connected to it.
I've tried unsoldering the battery, completely discharging tablet without it, soldered it back on, but didn't help.
Help?
bump
Try Livesuit 1.11.
I've used it to load several ROM's
I'm currently running FaaastJB v2.5 found at http://forum.xda-developers.com/showthread.php?t=2447819
Hi XDA members!
An urgent help is needed to fix a hard brick problem with my smartphone model. I've searched for my model make in this forum and tried all the methods of recovery relating to Karbonn A9 plus/cherry flare but no success till now...
So, here's the detailed explanation of how my phone got hard bricked:
Originally my phone had a bootloop issue where it would start with the phone model logo and get stuck at the boot animation. It would never go into android. (where it would be detected as an adb device in windows). So, I rectified it via fastboot mode flashing of my rom using AIO flashing tool. Then I delved deeper into the forums here and found out android kitkat update for my phone model. (my current version being ICS 4.0.4). I got ambitious and went ahead with flashing android kitkat using CWM recovery (again, I made sure I flashed the correct version of cwm recovery for my model first before flashing the new rom). CWM got flashed successfully and replaced my default android recovery system and it worked too (although screen would flicker while tool operated). Everything was perfectly going on till now. I was feeling happy to finally run kitkat on my 4 year old phone. My current OS was booting normally, I could go into CWM recovery, fastboot mode as well.
Now, here's where I made a mistake probably! :
I UPDATED CWM RECOVERY TO V6 JUST BEFORE BEGINNING THE FLASHING PROCESS FOR ANDROID KITKAT FOR MY MODEL. Then while flashing, I first decided to test the backup and restore function of cwm recovery. I backed up and restored my current version using cwm. It backedup without issues. But while restoring, it introduced some errors. (yeah, I didin't know cwm reformated the wrong partition instead of the boot partition while restoring the boot image!!! )
Now, my cwm recovery is gone, fastboot mode is gone.... heck... even battery doesn't show up as charging. I tried to press vol up + power button but nothng happens. It doesn't give any vibration feedback after the press. Same for just power button press.
Is there any chance of recovery at this stage??
I know cwm f****d up my phone's boot partition. Also, I searched for solutions to this problem as well here and found the article "How to revive dead Karbonn A9+/CM Flare after JB update". Yes, I tried the Qualcomm HS-USB QD Loader 9008 driver and QPST.2.7.374 tool on 32 bit windows xp (as problems were reported on 64 bit and windows 7 for the above mentioned driver installations, I had to take further pain and install 32 bit windows xp on my pc's second hard disk just to succeed in installing drivers for unbricking my phone..... as I use windows 7..... talk about problem getting bad to worst.... ah!! ) I plug the phone with battery in it to my PC (after successful driver installations) but phone isn't detected in device manager....
I tried everything, I fully charged battery overnight.
Result?? .... my phone is still not showing anything on screen. It's dead. It's not even accepting to charge from the wall. Forget booting or going to recovery/fastboot mode.
I will never use cwm recovery again on any future smartphone of mine!!!! :crying::crying:
PLEASE HELP me with reviving my phone!!!
Or should I give up trying and just buy a new smartphone??
thanks in advance.
Hello, so my phone is stuck in an infinite bootloop orange statefrom unlocking the bootloader and flashing the wrong version of TWRP....... It is a Wiko Tinno, SAS, U307AS... These are the names ive found looking for help. Its a government phone from assurance wireless... But basically i got this hone from my girlfriend i thought it was a wiko ride.... 30 minutes after given this phone i got it stucl in bootloop xD i found a tutorial on here i beleive to root a wiko ridge.... i unlocked the bootloader.... tried to install TWRP once, the phone rbooted to the setup as it factory reset from the bootloader unlock but when i went to recovery TWRP wasnt there.... Why? because it wasnt the right version for my phone..but as i am a little on the slow side i tried it again..... thats when it wouldnt even boot passed the orange state logo screen.... and since i tried to install a cust recovery guess what? i cant get into recovery mode..... the phone freezes and reboots back into bootloop. unlocking the bootloader im pretty sure assurance wireless wont like it and probably wont replace it..... i have been searching the internet and ive tried most things ive found ive tried flash tools sdk tools mtk tools flashing scatter files etc etc... i try and search for a way to fix it every couple days... its been about 3 months now.... im kind of running out of patience ive went as far as opening the back and replugging most of the films in hopes it would reset something to make it work.. if anyone has any ideas or anything please i would love to know...... on phone specs its tinno U307AS assurance its wiko life 2 and some weird gov. phone website its wiko SAS idk..
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
jwoegerbauer said:
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
Click to expand...
Click to collapse
i have. i just tried again. i cannot find a firmware or stock rom for my device. i have even tried to usea mt6739 scatter file.
im no beginner to phones here..but im seriously stumped.
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
jwoegerbauer said:
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
Click to expand...
Click to collapse
i fully charged my phone to test it out sadly it hadnt worked :\
Here ya go: https://rootmygalaxy.net/download-wiko-stock-firmware/
So I am having same issue after attempting to flash boot.img and now I cant access fastboot mode recovery mode I cant even hard reset it plus now I cant even get computer to recognize device HELP!!!