I am a totally dumb to do this, but accidently happen. When I decided to clean my AT&T Samsung S3 device and somehow I accidently click "wipe data/factory reset" and all gone.
What it is saying on the screen right now:
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : ATT
Successfully applied muti-CSC.
E:failed to mount /data (Invalid argument)
can't mount '/data'(Invalid argument)
E:Can't mount /data/log/recovery_log.txt
So, I would like to recover my device back to normal.. I tried to remember how doing that...
...help?
Please ask in appropriate forum your in int'l s3.
Related
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
peetayoo said:
I recently flashed axura and was good...but wanted to try something else.
Tried this one rom...I renamed it with spaces.
CWM says it to rename it without spaces or do it manually...did it manually.
Phone will show the splash screen where it says Vibrant and will stay there forever.
When I hold down the volume buttons and power up......here's the message it says:
E: Can't mount /dev/block/stl11
(Invalid argument)
# MANUAL MODE #
-- Appling Muti-CSC...
Installing Muti-CSC
E: Can't mount /dev/block/stl11
(Invalid argument)
E: Can't mount /dev/block/stl11
(Invalid argument)
I tried deleting all user data and cache data...but gives me the same can't mount error message
I'm really worried that my phone is going to become trash.
Is there anything I can do.
Hard reset?.....I don't know
Help me out please
Click to expand...
Click to collapse
Sounds like a nice boot-loop. From my experience, I would say flash back to a true stock rom via Odin and start over from a clean slate.
Please refer to the bible sticky and Odin back to stock and try again . The vibrant is really hard to brick dont worry
Thanks guys
Odin did it..I was worried at first because odin froze a few times, but after persisting it finally went through.
You guys saved my life!
I'm running trouble, Late July, I've flashed a firmware with ODIN WITH re-partition checked and PIF file:-( , I now have working tablet but if I return to CWM to flash another firmware, I have the following message and i can't flash anymore any ZIP file on my tablet.
---
# MANUAL MODE #
Updating application...
E:failed to mount /preload (Invalid argument)
E:install_application_for_customer:Can't mount /preload
your storage not prepared yet, please use UI menu for format and reboot actions,
copy application failed,
Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-Code 'XEU'.
E:multi_csc:Can't unmount /efs
Multi-csc applied failed
SOLUTION
Hi
I had the same issue, rooting the tab again resolved the CWM issue.
Try this:
http://forum.xda-developers.com/showthread.php?t=1171089
I'm sure by now you have figured this out, but I had the same issue on the Verizon LTE tab. I couldn't find too much online, so after hours of searching, I pieced together the solution. Figured I'd post here... maybe it will help one other person.
Ast2001 said:
Updating application...
E:failed to mount /preload (Invalid argument)
E:install_application_for_customer:Can't mount /preload
your storage not prepared yet, please use UI menu for format and reboot actions,
copy application failed,
Click to expand...
Click to collapse
The stock recovery doesn't have many options, so I flashed CWM, went into mounts and storage and selected format /preload
Ast2001 said:
Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-Code 'XEU'.
E:multi_csc:Can't unmount /efs
Multi-csc applied failed
Click to expand...
Click to collapse
For this, maybe try fixing permissions in CWM or try formating all the mounts. If you are starting from scratch with a stock RUU, as I was, wiping all the data won't be a big deal. My error was a little different, though...
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/XAB/system/.
Successfully applied multi-CSC.
Not sure it this is the right answer, but the reason mine couldn't access that folder was because it didn't exist. Using root explorer, I created those folders and the error has gone away. If anyone has a better solution, I'd be glad to hear it.
ok here is the problem i have a telus fascinate and here i tried to install the ics passion rom but i had to flash in an other rom first to get access to clockwork manager since it wasnt possible on my previous one then from there i formated the data and such then instaled this rom :
http://forum.xda-developers.com/showthread.php?t=1362961 so here what it did, first it installed correctly then got it to reboot and see that its stuck in boot loop for 15 min so im saying myself um not good so i decide to restore my backup but here when i flash back to stock i get this:
Code:
[COLOR="Blue"]Android system recovery <3e>
Enter: OK Key, Select: Vol UP / Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------[/COLOR]
[COLOR="Red"]E: copy_dbdata_media:Can'T mount /dbdata
your storage not prepared yet. please use UI men
u for format and reboot action[/COLOR]
[COLOR="SandyBrown"]Media files copy failed
Manual MODE
--Appling Multi-csc....
installing multi-csc
Can'T access to '/system/csc/tls/sys/'.
successfully applied multi-csc[/COLOR]{----this is yellow but was too flashy to put it in that color
[COLOR="Red"]E:failed to mount /cache (invalid argument.)
E:Can't mount /cache/recovery/recovery_kernel_log
E:copy_kernel_file:: Can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (invalid argument.)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to mount /cache (invalid argument.)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (invalid argument.)[/COLOR]
ok so here i am not knowing what to do i need help im not the best in these things can someone clearly point me to a solution or help plz
You need to flash a better recover than the stock recover, which you will likely need to flash with Odin. I'd try the Vibrant board to see if someone there could be of more assistance, but that's basically what you're looking at, as far as I recall from my TMO Vibrant.
Ok here are the updates of the problem, i did the a complete wipe of the phone then flashed the ice cream sandwich from passion from the phone and i loaded now where it bugs is there is no mobile network so im kinda stuck it detect telus under access point but in network operator it find nothing any idea guys?
You need to go back to eh03 via odin. Then flash as usual through cwm. It happened to me before. Without odin you wont get out of this.
Sent from my SCH-I500 using xda premium
Hello,
I own a Korean galaxy player 5.0 (16GB) YP-GB70. I previously had a custom rom flashed onto it. But I tried flashing a new rom by following the directions, that is revert back to a stock rom and flash the new rom. But after I flashed the new rom, the device was stuck in boot loop. The recovery and the download screens work however. I tried flashing a stock rom again but it was again stuck in a boot loop. I tried flashing many other roms but none of them worked.
In recovery mode it keeps showing this
-- Appling Multi-CSC...
Successfully applied multi-CSC.
E:failed to mount /cache (No such file or directory)
E:Can't moundt /cache/recovery/recovery_kernel_log
E:copy_kernel_file :: Can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recover/log
E:Can't open /cache/recover/log
E:failed to mount /cache (no such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (No such file or directory)
I tried wipe date/factory reset and wipe cache partition but neither helped.
Any help would be appreciated Thanks in advance!
hello
what FW did you flash last?
Did you touch at the PIT?
Do you use odin or other tool?
did you wipe "before" flashing? (can be different.)
IF ok you have to check if your memory partitioning has not been modified by a tricky kernel. (adb tools)
courage
Have you checked this thread?
http://forum.xda-developers.com/showthread.php?t=1457730
Since your model is a Korean (YP-GB70) the hardware is different from the International (YP-G70).
It appears you know how to flash ROMs via Odin so you will need only a original Froyo or Gingerbread firmware with the file dbdata.rfs and a .pit file to use the re-partition and make your playea as new...
Hello.
I have an AT&T Samsung Galaxy Note 3 SM-N900A that I have rooted using towelroot and have verified that I have root access.
I am trying to backup my current ROM before I do anything so I have something to go back to and when I use any of the programs that everyone recommends for ROM management the phone boots into the Recovery screen and I get the following screen
Android system recovery <3e>
KOT49H.N900AUCUCNC2
#MANUAL MODE#
--appling Multi-CSC...
Applied the CSC-code : ATT
Successfully applied the multi-CSC
E:failed to mount /data (invalid arguement)
cant mount '/data' (invalid arguement)
E:failed to mount /data (invalid arguement)
E:cant mount /data/log/recovery_log.txt
E:failed to mount /data (invalid arguement)
E:cant mount /data/log/emmc_checksum_log.txt
From here it gives me the following options
Reboot system now
apply update from ADB
apply update from external sd card
wipe data/factory reset
wipe cache partition
apply update from cache
int he middle of the screen I have a droid on its back with a red triangle with an ! in the center that says No command underneath it.
Im trying to make a ROM backup and have tried it using ROM toolbox, Nandroid Manager, TWRP Manager, Clockworkmod ROM manager
any help getting this ROM backed up would be appreciated.
Thanks
Robert
Does my bootloader need to be unlocked to get a backup and restore option? I have a rooted note 3 and an LG realm that both throw the same type error when I boot into recovery and they are rooted and my wife's galaxy s4 is not rooted and throws the same error when I boot it into recovery
Sent from my SAMSUNG-SM-N900A using Tapatalk