STEPS:
1- Install PhilZ Touch Recovery OR any CWM Recovery which is 6.0.5.0+ (needs HW TLS support).
->You can find compatible PhilZ Touch Recovery here (Use PhilZ Touch v6.57.2 for cm11 as I said on the thread linked below).
madteam.co/forum/index.php?topic=6338.0
->You can find latest compatible CWM recovery on the official thread linked at the end of this post.
2- Download the CM11 ROM file (.zip file) from here:
http://jenkins.androidarmv6.org/job/cm-ota/ (carefully read instructions on that page)
3- Now reboot to recovery and install the CM11 zip file which you just downloaded.
4- After installing that zip (or before installing - your wish...the order doesn't matter), make a data wipe (Wipe Data / Factory Reset).
5- Optionally, install gapps. You can find compatible gapps for cm11 here:
madteam.co/forum/index.php?topic=6285.0
First boot may take up to 5-10 minutes. You'll regularly (weekly for NIGHTLIES and monthly for RCs) get updates and you can update by following instructions given on that JENKINS page (which I linked to download CM11 ROM file).
-----> For more detailed info and to know about latest updates happening in androidarmv6's cm11 project, Go through the official thread:
http://madteam.co/forum/index.php?topic=5883.0
NOTE: I WOULD RECOMMEND EVERYONE TO FOLLOW THE OFFICIAL THREAD (linked above) TO KEEP IN PACE WITH LATEST UPDATES GOING ON IN ANDROIDARMV6 PROJECT. INSTALL INSTRUCTIONS ARE ALSO MENTIONED THERE, I WOULD RECOMMEND TO FOLLOW THE INSTRUCTIONS ON THAT THREAD IF MY POST SEEMS OUTDATED AND MY METHOD FAILS (in case I haven't updated my thread for latest updates happening in the project).
I've kept this post short and simple (I only mentioned necessary steps in short) . So if you have any doubts installing cm11 (KitKat 4.4.x), feel free to ask here.
Bhargav97 said:
STEPS:
1- Install PhilZ Touch Recovery OR any CWM Recovery which is 6.0.4.5+. You can find PhilZ Touch Recovery here:
http://forum.xda-developers.com/showthread.php?t=2653824
2- Download the CM11 ROM file (.zip file) from here:
http://jenkins.androidarmv6.org/job/cm-ota/ (carefully read instructions on that page)
3- Now reboot to recovery and install the CM11 zip file which you just downloaded.
4- Optionally, install gapps. You can find compatible gapps for cm11 here:
http://forum.xda-developers.com/showthread.php?t=2623802
First boot may take upto 5-10 minutes. You'll regularly (mostly weekly) get updates and you can update by following instructions given on that JENKINS page (which I linked to download CM11 ROM file).
For more detailed info and official threads, here are they:
1) http://madteam.co/forum/index.php?topic=5883.0
2) http://madteam.co/forum/index.php?topic=6192.0
I've kept this post short and simple (I only mentioned basic things) . So if you have any doubts installing cm11 (kitkat 4.4), feel free to ask here.
Click to expand...
Click to collapse
Have tried friends
I install this but don't have google play?
nemanjsb said:
I install this but don't have google play?
Click to expand...
Click to collapse
Did you install gapps?
I managed but rom have lag...
nemanjsb said:
I managed but rom have lag...
Click to expand...
Click to collapse
I haven't the rom, so i can't help you
Gapps are heavy.
Sent from my D620R [Stock 4.4.2]
Vagelis1608 said:
Gapps are heavy.
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Coooool!
A 7 MB gapps package is heavy?
Bhargav97 said:
Coooool!
A 7 MB gapps package is heavy?
Click to expand...
Click to collapse
I didn't mean /system memory but RAM
I get error 0.
TransformixS4 said:
I get error 0.
Click to expand...
Click to collapse
Sorry, my mistake. I forgot to update this thread for latest changes in cm11 project (androidarmv6-cm11). I've updated my first post with new install instructions. They'll work now but I can't guaranty that they'll work in future if I don't update my thread for any major changes in cm11 project like: kernel 3 integration. I'll recommend you & all others to follow the official thread if my instructions fail.
NOTE: Please read my NOTE on first post to be safe in future.
Bhargav97 said:
Sorry, my mistake. I forgot to update this thread for latest changes in cm11 project (androidarmv6-cm11). I've updated my first post with new install instructions. They'll work now but I can't guaranty that they'll work in future if I don't update my thread for any major changes in cm11 project like: kernel 3 integration. I'll recommend you & all others to follow the official thread if my instructions fail.
NOTE: Please read my NOTE on first post to be safe in future.
Click to expand...
Click to collapse
Thanks
link not work...
Stuck on odin mode
Hi! A few years ago i bricked my i5500... i don't remember how...but, now, everytime i try to flash anything (in one package mode), odin stuck in this step (see the pic)...how can i solve?
I need the CM11 ROM file, does anyone have a copy to share?
Felipefpbm said:
I need the CM11 ROM file, does anyone have a copy to share?
Click to expand...
Click to collapse
I made a post in the Android Development Thread. Check there.
Related
CyanogenMod 11.0 for the HTC DNA is still in it's alpha stage. You can see the bugs at the bottom of the second post.
Compiled from CyanogenMod 11 Nightlies source and will update them as they come out.
Flash at your own risk!
How To Install:
Switching to CyanogenMod 11.0 from another ROM:
- Make sure you're running a proper working CWM Recovery.
- Download Gapps and the CM 11.0 zip on to your phone.
- Boot into recovery
- Wipe data/factory reset.
- Flash the CM 11.0 zip from your SD card.
- Flash the Gapps zip from your SD card.
- [ROOT] Flash SuperSU 1.69 or above.
- Reboot to system.
- Don't report bugs related to ART or not wiping cache or using old data from titanium backup!
Upgrading from an earlier version of CyanogenMod 11.0:
- Download the updated CM 11.0 zip on to your phone at least 6.0.4.4 or above.
- Boot into recovery
- Flash the update from your SD card.
- Flash Gapps zip from your SD card.
- Flash SuperSU 1.69 or above.
- Reboot to system.
Downloads
Builds
- CM-11 [11/24/2013] Download
GSM Patch
- GSM Patch DLX v2.3 Download
Gapps
- Gapps 4.4 KitKat Download
SuperSU
- SuperSU XDA Link - Please download the installable zip and flash it per instructions.
Recovery
- CWM 4.0.4.5 Download
Credits
+ CM Team [CM Source]
+ Flyhalf205 [Recovery]
If you are not mentioned and helped in some way please let me know thanks.
Sources
- CM Source
- Kernel Source
Please hit thanks and rate this thread 5 stars if this has helped you!
What works in this version?
- Bluetooth
- Calling
- Camera
- Data
- GPS
- Messaging
- Multimedia Messaging
- WiFi
What don't work?
- ???
Version Information
[Lastest Update] 11/23/2013
[Lastest Build] 11/24/2013
Changelog
11/23/2013
- dlx: external storage (usb-otg) ala 4.4
11/21/2013
- Set CDMA SUBSCRIPTION SOURCE to RUIM in Database for this device
11/19/2013
- kernel: remove extra debugging specified on the command line
- Enable NFC host-based card emulation
- dlx: enable LTE mobile network settings
All changes are not listed here but you can find them here with the lable cm-11.0 to the right.
glad to see more devs come to our device!
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Can we just clear cache and flash this if we are already running the other CyanogenMod 11 from the other thread? The one that is NOT nightly? Or will we have to wipe then flash?
gypsy6slayer said:
Can we just clear cache and flash this if we are already running the other CyanogenMod 11 from the other thread? The one that is NOT nightly? Or will we have to wipe then flash?
Click to expand...
Click to collapse
Yes you should be able to flash the ROM then flash Gapps and flash SuperSU and get away with just wiping the cache.
maxjivi05 said:
Yes you should be able to flash the ROM then flash Gapps and flash SuperSU and get away with just wiping the cache.
Click to expand...
Click to collapse
Alright cool I'll give it a try, but will I have to flash Gapps if I've already got 4.4 Gapps? Cause I am running CyanogenMod 11 with Android 4.4, I just don't have this nightly updated version.
gypsy6slayer said:
Alright cool I'll give it a try, but will I have to flash Gapps if I've already got 4.4 Gapps? Cause I am running CyanogenMod 11 with Android 4.4, I just don't have this nightly updated version.
Click to expand...
Click to collapse
Yes, anytime you replace system applications you will want to flash Gapps and if you want root you'll want to flash SuperSU after you flash Gapps. So just flash the ROM, then flash Gapps, then flash SuperSU all back to back, wipe cache then reboot and enjoy!
maxjivi05 said:
Yes, anytime you replace system applications you will want to flash Gapps and if you want root you'll want to flash SuperSU after you flash Gapps. So just flash the ROM, then flash Gapps, then flash SuperSU all back to back, wipe cache then reboot and enjoy!
Click to expand...
Click to collapse
What's the difference between this build and amit_sen's? Seems like you two should work together, not compete with the same unofficial build?!
Sent from my HTC6435LVW using XDA Premium 4 mobile app
As of this build it has the updates to the source from 11/23/2013 which is just one file change for something to do with OTG. Basically I want to keep updated asap and took on this task as a learning curve and eventually may release a ROM with extra features beyond CM 11 but right now its directly from the source.
Sent from my HTC6435LVW using Tapatalk
maxjivi05 said:
As of this build it has the updates to the source from 11/23/2013 which is just one file change for something to do with OTG. Basically I want to keep updated asap and took on this task as a learning curve and eventually may release a ROM with extra features beyond CM 11 but right now its directly from the source.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
I would advise you to use my thread and post your builds over there rather than creating a entirely new thread. You can lock this thread.
Iam not posting new builds everyday as nothing major is being added. Next build should be out when h/w key mapping is added.
In the meanwhile iam bringing 2 new KK roms
@amit_sen - dude I haz only 1 Dna
Will do, didn't want to intrude but will post new updates to your thread.
Sent from my HTC6435LVW using Tapatalk
No camera in this buil
mods please lock this thread will post futures updates to amit_sen's thread.
can confirm camera isn't working. When I try to load the camera it stays on a blackscreen, the buttons work but do nothing there is no image and when the phone is rotated to landscape mode I get a force close.
keithwired said:
can confirm camera isn't working. When I try to load the camera it stays on a blackscreen, the buttons work but do nothing there is no image and when the phone is rotated to landscape mode I get a force close.
Click to expand...
Click to collapse
Camera issue has been fixed, it was a driver issue which is being uploaded and will be posted in other CM-11's Thread here.
maxjivi05 said:
Camera issue has been fixed, it was a driver issue which is being uploaded and will be posted in other CM-11's Thread here.
Click to expand...
Click to collapse
Can you let us know when its ready please
Its ready now
Sent from my HTC6435LVW using Tapatalk
please delete repeated files, thanks
alejobog said:
please delete repeated files, thanks
Click to expand...
Click to collapse
If u remember correctly there not repeated but it's supposed to be c like that
Sent from my dlx using Tapatalk
Hi guys!
I have just compiled Android AOSP Lollipop 5.0.0_r2 from Google latest sources and want to share with you.
No changes from me, super clean build. Keep in mind it's built with older preview binaries like all other ROMs.
Download flashable ZIP:
http://bit.ly/LRX21M
Instruction:
1.Boot into recovery
2.Flash attached zip
3.Flash GAPPS
4.Reboot and ejnoy!
Download IMG files:
http://bit.ly/LRX21M-IMG
Instruction:
1.Unpack files in android developer tools/platform-tools (where is your fastboot.exe placed)
2.Boot into bootloader
3.Run flash-all.bat file
4.Done! Enjoy!
For GAPPS flash TWRP recovery and correct zip file
Suggested GAPPS: https://drive.google.com/file/d/0B0LnTbgUOuxYTk5VS0tmbENqQzA/view
If you want to support student and his work:
First!! I flash this now
Thanks for rom, but what is correct gapps?
Racpu_ said:
Thanks for rom, but what is correct gapps?
Click to expand...
Click to collapse
Added in OP
Cannot get the the gapps seems its been downloaded to many times. Thanks for this though any links to other gapps ?
Sent from my Nexus 5 using XDA Premium HD app
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
katsumeiyo said:
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
Click to expand...
Click to collapse
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
mastero9017 said:
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
Click to expand...
Click to collapse
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
katsumeiyo said:
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
Click to expand...
Click to collapse
It's their own mirror of gapps.
IMG files added in OP!
Niiiiice
Woops! wrong thread
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Does this contain SuperSU, or do I need to flash after install?
Whenever I try to flash, it tells me that there is no OS installed when I try to reboot.
NO OS install like another L thread.
Deleted
Sorry op for posting link
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
ps000000 said:
NO OS install like another L thread.
Click to expand...
Click to collapse
Just reboot.
Merckle said:
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Click to expand...
Click to collapse
Just updated drivers really. There currently aren't any lollipop binaries that are available. Unless you can pull them from the current preview. However, you can use the preview binaries or the 4.4.4 ones until the new ones drop. I used the preview ones, but haven't been able to flash it yet.
Jnn1 said:
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
Click to expand...
Click to collapse
Where are there cm gapps you speak of??
Edited : found them here https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141106-signed.zip
Thanks for the rom!
First of all welcome This is one Noob Friendly GUIDE from me, like title says... If theres anything u need feel free to reply in this thread..
Hope everyone here know how to flash ROM, but there re people that still ask me how to flash some ROM, this is guide for them
If youre on 4.2, you should upgrade to 4.4.4 : http://forum.xda-developers.com/showthread.php?t=2432476 (recommended)
https://www.youtube.com/watch?v=0-TZ347tasw&list=UUny-iARLnbyw1OVIaQhi3Pw (one OLD guide but it could help, follow first link it is recommended)
ROOT:
First of all you`ill need to root your device:
Or, in List Form:
Ensure you have the proper USB drivers installed, and your phone is in the proper mode (For Verizon, use Ethernet mode on the PC settings menu)
Enable Developer Mode on your phone and enable USB Debugging
Extract this zip file somewhere on your PC
Run root.bat
The phone will ask you to disconnect USB, disable USB debugging, then re-enable it and plug the phone back in, do so when prompted
You will be then asked if you would like to have a superuser package installed, which you can accept or decline
Click to expand...
Click to collapse
Downloads for root: http://pastebin.com/RBHHCtvH
Source : http://forum.xda-developers.com/showthread.php?t=2448887
Thanks @thecubed
I think the easiest way to install recovery is to install TWRP using AutoRec app, yeah you could do the same things (flashing/wiping etc..) by installing CWM from TWRP or installing just CWM from adb or however
TWRP:
Guide
Upgrade to KitKat using KDZ / TOT / OTA method
Root your device (using ioroot25)
Install AutoRec (grant root permission)
*D801 must root before taking KitKat OTA
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showthread.php?t=2715496
Downloads: http://bit.ly/g2_AutoRec
Thanks to: @Cloudyfa
And: @bender_007
Now:
Boot into TWRP/CWM Recovery (Shut down your phone, Press and Hold Volume - and POWER till you see the LG logo appears, then immediatly let the keys and hold them again till you see message about factory reset, just press power button 3 times, dont worry it will not factory reset your phone, it will bring u to recovery )
Go to Install/flash .zip/Rom (name) .zip and swipe or press YES and it will says: Reboot device? go to NO
Now you should flash Gapps, repeat same proccess ( Install/flash .zip/name_gapps.zip ) (GAPPS stands for Google Apps... That includes stuff like the gmail app, google maps, google goggles, etc. ) Do not reboot device, stay into recovery
Now you should do full wipe: Go to advanced/wipe/check: data and swipe (if ure using CWM go just to YES)
Go to advanced/wipe/check: cashe (if ure using CWM go just to YES)
Go to advanced/wipe/check: system (if ure using CWM go just to YES)
Go to advanced/wipe/check: dalvik cashe (if ure using CWM go just to YES)
If it is asking you for installing root, press yes if u wanna root on your device
Yeah finnaly you can reboot your device and enjoy new system
Links to 5.0 (Alpha versions):
CM12 (most stable version, recommanded) : http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269
CM12 : http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-lg-g2-t2944935
LiquidSmooth 4.0 (one more stable L ): http://forum.xda-developers.com/lg-g2/development/rom-liquidsmooth-v4-0-lg-g2-t2948395
Link to my youtube channel (instead pressing donate link you can just subscribe, if u want )
https://www.youtube.com/user/KiaTheKingPRODUCTION
Link to VIDEO GUIDE:
https://www.youtube.com/watch?v=aIdYDsgkNLY&feature=youtu.be
Link to CM12 video review:
https://www.youtube.com/watch?v=Y1W43rGy9hA&list=UUny-iARLnbyw1OVIaQhi3Pw
Link to LiquidSmooth 4.0 video review:
https://www.youtube.com/watch?v=XbgtCgPPqDg&list=UUny-iARLnbyw1OVIaQhi3Pw
There are some mistakes, forgive me ...
Mods, ill add a lot here and answer all questions, so be patient, thanks.
You should probably add that this is not daily driver material. And also clean up some spelling mistakes in the thread.
₪LG G2₪
Zyner said:
You should probably add that this is not daily driver material. And also clean up some spelling mistakes in the thread.
₪LG G2₪
Click to expand...
Click to collapse
Yup offcourse, it will be fixed soon
Can someon explain to me why none of these roms work with d803 ??
buski said:
Can someon explain to me why none of these roms work with d803 ??
Click to expand...
Click to collapse
You can install these Roms on your D803, youill just need to flash D803 kernel after flashing rom
I dont think its possible yet that way
UPDATE: Video added.
https://www.youtube.com/watch?v=aIdYDsgkNLY&feature=youtu.be
Kia, good read. A lot of ppl flashing the new cm12s should look at this.
Zyner said:
You should probably add that this is not daily driver material. And also clean up some spelling mistakes in the thread.
₪LG G2₪
Click to expand...
Click to collapse
I have to disagree. Been running Ls 4.0 and it works great. Maybe a few bugs but dialer works, MMS, YouTube, camera, WiFi and data, proximity while in call, ect all work. I've been on it since LS released it and much better than kk. Maybe no major customizations but those will be soon to come. An added bonus is the battery, at least for me, is a step above kk.
jeff5347 said:
Kia, good read. A lot of ppl flashing the new cm12s should look at this.
I have to disagree. Been running Ls 4.0 and it works great. Maybe a few bugs but dialer works, MMS, YouTube, camera, WiFi and data, proximity while in call, ect all work. I've been on it since LS released it and much better than kk. Maybe no major customizations but those will be soon to come. An added bonus is the battery, at least for me, is a step above kk.
Click to expand...
Click to collapse
Thanks.
Yeah it is almost stable, its almost beta I flashed liquidsmooth over cm12 without wiping data and there's less bugs ....
What is new firmware 4.4.4 or 4.4.2 ?
miklu45 said:
What is new firmware 4.4.4 or 4.4.2 ?
Click to expand...
Click to collapse
You can do this from both.
Sent from my LG G2 using xda app-developers app
But official firmware?
miklu45 said:
But official firmware?
Click to expand...
Click to collapse
Newest is 4.4.4
lel its 4.4.2.
d802 4.4.4 official update link pls
miklu45 said:
d802 4.4.4 official update link pls
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/ here you can download EuropeanOpen.kdz, i dont know execatly is it 4.4.4 but after installing this you can update to 4.4.4 via OTA (if it is not).
KiaTheKing said:
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/ here you can download EuropeanOpen.kdz, i dont know execatly is it 4.4.4 but after installing this you can update to 4.4.4 via OTA (if it is not).
Click to expand...
Click to collapse
Nope, there is no android 4.4.4 stock lg fw. Latest fw for open eur is V20H which is 4.4.2.
Boris31 said:
Nope, there is no android 4.4.4 stock lg fw. Latest fw for open eur is V20H which is 4.4.2.
Click to expand...
Click to collapse
I thought it came in september this year O.O Never mind, now i know theres no official 4.4.4 hah
If anyone has some comment, ot want some help, please ask here
or here:
This is my first "guide", hope everyone understand it.. I know it isnt perfect but next time it will be better
Also update with video about cm12:
https://www.youtube.com/watch?v=Y1W43rGy9hA&list=UUny-iARLnbyw1OVIaQhi3Pw
UPDATE:
Added review of LiquidSmooth:
https://www.youtube.com/watch?v=XbgtCgPPqDg&list=UUny-iARLnbyw1OVIaQhi3Pw
cyanogenmod or liquid smooth
which rom is more stable?
CyanogenMod 11 - LG Optimus L3 II
--------------------------------------------------------------------------------------------------
Instructions for flashing:
Make sure you run latest Recovery Vee3.
Download the cm-11-20150620-UNOFFICIAL-vee3.zip
Download GAPPS of your preference.
Place in the card
Reboot to recovery
Wipe Data/Factory Reset
Install the cm-11-20150620-UNOFFICIAL-vee3.zip
Install GAPPS
Reboot
Enjoy
If you have L3 II Dual: Thank to @Caio99BR
Make sure you have installed cm-11-20150620-UNOFFICIAL-vee3
Download and Install VeeKernelDual and Single2Dual
Go to Settings and disable Mobile Data of both sim.
Reboot and Enjoy !
Downloads:
cm-11-20150622-UNOFFICIAL-vee3
VeeKernelDual
Single2Dual
what the difference to CM11 that Caio post ?
AndersonSKVBR said:
what the difference to CM11 that Caio post ?
Click to expand...
Click to collapse
Is the same.
Caio99BR said:
Is the same.
Click to expand...
Click to collapse
source update
AndersonSKVBR said:
what the difference to CM11 that Caio post ?
Click to expand...
Click to collapse
Caio99BR said:
Is the same.
Click to expand...
Click to collapse
source updated
In other words, you just kind of finalized Caio's ROM, right?
shhnedo said:
In other words, you just kind of finalized Caio's ROM, right?
Click to expand...
Click to collapse
no, i'm built it by myself with the newest source
Understood now. Thank you for the clarification.
I can not download the necessary files for a LG E435 DUAL SIM
Hi all, in my case I have an LG E435 Dual Sim, I need help, the links for VeeKernelDual and Single2Dual files are not available for download, please upload files to new location
The site androidfilehost.com is not available
Downloads:
cm-11-20150622-UNOFFICIAL-vee3
VeeKernelDual
Single2Dual
The site androidfilehost.com is not available
maykelcobas said:
...
Click to expand...
Click to collapse
Again, like in the other CM11 L3II threads, the problem is on your side, all links work perfectly.
thanks
Installation, please help me!
Where can i download the lastest Recovery Vee3? Is it TWRP? I have CWM , Can i install TWRP? There is no problem having 2 recoverys installed?... Any bug? Camera, keyboard, touch, downloading, mic, music, MTP conection... all OK? How should i install the three zipped files (wipes, order, ...)? Please i need more information.
Thanx
P.D: sorry for my bad english...
LUNAH1785 said:
Where can i download the lastest Recovery Vee3? Is it TWRP? I have CWM , Can i install TWRP? There is no problem having 2 recoverys installed?... Any bug? Camera, keyboard, touch, downloading, mic, music, MTP conection... all OK? How should i install the three zipped files (wipes, order, ...)? Please i need more information.
Thanx
P.D: sorry for my bad english...
Click to expand...
Click to collapse
There are the installers for the TWRP/Philz Installers (or recovery vee3). You just only install one recovery. It haves some mic redirection bug and no more else. And the steps for flashing its:
First: Wipe all the stuff (cache, data, system, dalvik cache)
Second: Flash the rom (i mean, the cm11...zip file)
Third: In case you have dual-sim, flash the another ones, first the Single2Dual, and after the VeeKernelDual.
Fourth: Flash gapps for 4.4.4
And enjoy c:
This lags a lot :/
Even with engines/Tweaks
Maybe the phone itself as I have the same ROM in a lower device (Galaxy Pocket Neo) and it's not laging so much as it
For SM-G530H / 5.0.x Lolliopop ONLY!!!
DEODEXED OR ODEX!
ADDITIONAL NOTE: (Nov 2020 update) Hey, Sorry I've been gone for a long time and I don't have the phone in me now. I don't think I can help you guys in any way as I don't have the phone anymore. DO IT AT YOUR OWN RISK AND ALWAYS DO A FULL BACKUP.
INTRO:
You can now install TWRP recovery and Chainfires' SuperSU without using a PC! All you need is your Android Device and a stable internet connection.
REQUIREMENTS:
• Internet Connection
• Flashify (Download it from GOOGLE PLAY)
• Mega (Download it from GOOGLE PLAY)
• Kingroot [Latest] (Search it on GOOGLE)
• TWRP.img | Download link (MEGA)-> https://mega.nz/#!YB9RiJza!Acn3L1Js7JyLUK3im8vwvTs6CIkak01uarVC-opOihk
TUTORIAL:
• Root Your Device using KINGROOT.
• Now you're rooted! Move ''TWRP.img'' to ExternalSdCard
• Open ''Flashify'' app, Find ''RECOVERY IMAGE'' and you'll be prompted... Choose 'CHOOSE FILE' and locate the 'TWRP.img' on your ExternalSdCard.
• You'll be ask to reboot. Restart Your phone and it will automatically go to twrp recovery! Done!
EXTRA TUTORIAL: KINGROOT TO SUPER SU!!!
• Download This SuperSU~> https://mega.nz/#!8VVTjBwL!MmLt-iJZ79kYlZo6bOW0chVQxG90cAR0fdppar-E-fQ
• Move it to EXTERNALSDCARD
• Flash Via TWRP
• DONE! Congratulations, Kingroot is gone and you now have SuperSU!
Did it work for you? Tell us in the comments!
Hit like if this tutorial helped you :3
NOTE: every time you restart ypur phone it will automatically go to TWRP recovery, Don't worry it's normal.
On latest samsung firmwares(I'm using xxu2bok3 for 350h)im using cwm and flash it with flashfire and don't have the reboot in to recovery bug, before the firmware update(xxu...BI0)have that bug, think Sammy fix the kernel b/c I'm also notice that my phone is faster keep more ram free, even with a lot of app open in the back and the best is not aggressive on managing the ram any more closing the apps when you open another and let it in the back.
Good tutorial ?
Also you could mention that if anyone wants to use Xposed, now is not necessary deodex the ROM, with version xposed v79 beta from artec, just need to free some space and flash it through TW or cwm.
Enviado desde Tapatalk!!
Is it working on g530h xcu?
nicochristian04 said:
Is it working on g530h xcu?
Click to expand...
Click to collapse
Yes! We are using the SAME phone so I'm sure this will work for you
Added SuperSU tutorial.. Isn't that great? Ypu can now do anything without PC!
... Except for flashing a stock rom tho, hahaha
Keitaro1999 said:
Yes! We are using the SAME phone so I'm sure this will work for you
Click to expand...
Click to collapse
If anything goes wrong i can fix it by flashing stock rom right?
nicochristian04 said:
If anything goes wrong i can fix it by flashing stock rom right?
Click to expand...
Click to collapse
Of course! but again, Your on ur own now... If anything happens I'll be glad to assist you but that's all I can do.
Hey if i installed the twrp then i flash stock rom, will the recovery back to stock or still twrp recovery?
Will this work on my SM-G530AZ running 5.1.1 lollipop? Keep in mind I already rooted my phone using the same method without the twrp.
-Thanks in advance
Illyakulinych said:
Will this work on my SM-G530AZ running 5.1.1 lollipop? Keep in mind I already rooted my phone using the same method without the twrp.
-Thanks in advance
Click to expand...
Click to collapse
Nope.
nicochristian04 said:
Hey if i installed the twrp then i flash stock rom, will the recovery back to stock or still twrp recovery?
Click to expand...
Click to collapse
It should go back to stock recovery. But I'm not sure~ haven't tried that yet.
thanks
Is it working for g530h xcu kitkat? Thanks for response
Please someone give me alternate link to download twrp.img
Excuse me, i'm using SM-G530H XCS lollipop now. Where can i get the latest TWRP recovery? (3.2.3.xx isn't it?)
I used to search it on google but i can't found it.