Hello guys, first thing ..sorry for my english. I have a problem with my HTC and i don't know if it's only software problem or hardware. Here's the thing:
I had my phone in pocket while was raining, after that i use it like half hour. Then my phone suddenly turn off (there was logo HTC and then black screen). I tried to turn it on but there was only hboot on screen so i removed the battery and there was water under battery. I left it for an hour and then i tried to dry it with hair dryer. When i turn it on there was still only hboot and volume down button doesnt work, volume up button do things like i push volume down (no previous item but next item) and power button doesnt work too, so i cant select anything. Now i don't know if it's problem with that water thing or it is only software problem. Can you guys help me?... thank you !!!
In my opinion, it's a hardware problem, caused by water. Also you made 2 big mistake. The first one you tried to turn on the phone and the second one used hair drawer.
Sorry for my bad English.
havv said:
In my opinion, it's a hardware problem, caused by water. Also you made 2 big mistake. The first one you tried to turn on the phone and the second one used hair drawer.
Sorry for my bad English.
Click to expand...
Click to collapse
but why there was HTC logo during turning off?.. If it was a problem with water it should shut down immediately, right?
Related
Qeustion
My HD screen is off, and i cant seem to get it on again.
I just was working on it 1hour ago, took it out of my pocket and see that i have no screen.
Rebooted the phone, but no succes .. i see the screen turning on, but it light-gray (backlight) but no actual info/colors etc, also tryd a soft reset, no succes.
I have the Energy ROM Com5 build from 8July with the new 2.12 radio rom.
Could it be that in some way the screen died?
Hope someone can help me, im @ work now so i cant connect it with the PC.
When im home im planning to reflash the device ..
Thanks!
Weird
I just pressed a button and the screen turned on, and the colours/info just slowely fade away ... weird.
Could it be that the touchscreen is not oke anymore?
Or could it be a problem in the radio/rom i use? (and therefore a reflash could fix this?)
Hope its a easy sollution, otherwise ill be flashing it to stock and get it fixed by HTC.
Very very strange.
It seems to work again.
Anyone think i should reflash it to stock and try get a new one?
Are these signs of a screen going defect?
I dont know, first phone for me with touchscreen.
I would suspect a faulty screen, if it is still within warranty i would deffinately get a new one, however yes, try going back to stock first, see if it helps, it may be just a bad flash.
screen problem
I've had this and similar problems with my HD2, now on the 5th replacement from HTC in just 6 months of owning the phone. I also had the same problem on my HTC HD previously. Press the power key and just the buttons at the bottom light up but no response from the screen. Also had exactly the same problem your experiencing where you can faintly see the screen but not lit up. Flash it to stock rom and return to HTC for repair.
BEWARE!!! take some pics with date stamps of your handset before returning. They sent me 3 handsets all with the glass front panel not fitted correctly. Check the return handset carefully, you should be able to feel a lip between the casing and the screen as the screen is set a fraction lower than the casing. THis should be uniform all around. They tried telling me that i had damaged it myself despite calling them as soon as the handset had been delivered back to me.
micky9869 said:
Press the power key and just the buttons at the bottom light up but no response from the screen.
Click to expand...
Click to collapse
That's 'sleep of death', which affects loads of htc devices.
Oke i will stock it soon and return for repair.
I think its idd a screen problem, cause when the screen isnt functioning anymore, and when i put my ear on the glass, i hear a little squishing sound, like air is escaping .. it doesnt do that when the screen shows info/colour.
hi guys,
i'm having this really wierd problem just started couple of hours ago, ok so the problem is that when i reboot my phone and get into windows mobile or android everything works perfectly however as soon as i power off and wake up the phone the touch screen stops responding completely and the only way i see is to hard reset the phone again and i have no idea whats causing it i changed roms , changed radio and yet i still have this problem so someone please help me out, i don't no if the touch screen is messed up or what
because the touch responds perfectly the way it should when i reset my phone but after i power off the screen and wake up to the lock screen i can't unlock the phone b/c it won't respond to my touch after that
so please help out guys
thanks
hm... try hard-reseting the phone. but back up your data first using some backup software like sprite backup
Tried that as well no luck any other suggestion guys
Sent from my HTC HD2 using XDA App
I had the exact same problem, and I had to hard reset everytime, but as soon as I would press the end key it would be unresponsive. What I learned is that right after you hard reset you should only try waking pressing other keys than the end key and let it go to sleep by itself. Also did you use any EVO android builds, or Android at all, not sure if it's relevant, but that's where it all went wrong for me with the EVO build. I do find it quite odd that quite a few people are experiencing the same thing with the touchscreen and it also seems that there really isn't a solution to this. I had to send it in for a repair, and it got fixed pretty quick. Perhaps this needs to be investigated more.
i have same problem with my htc hd2
it is so annoying. i will send to repair service too..
hey i have the same problem too ! did you installed the new c0okies home tab ? because i did and after that it start it messing up.. well i did a thread yesterday about this.. the only responses i got was to send it back to repair. I just did not turn off the screen for nothing today during the whole school day it almost finisihed the whole day, it last it me about 6 hours without turning off the screen, otherwise the touchscreen becomes unresponsive.
Temporary fix/test
I just fixed it temporarily, i fixed it by taking off the battery cover and pressing down on the htc logo (below lcd) and pressure on both the front and back of the phone where the htc logo is.
if you do this and it fixes it, you most likely have a dodgy lcd/digitiser flex ribbon cable.
MY screen backlight will not turn off. It goes from dim to bright, every few seconds. I cannot get it to turn completely off either, when i hit the endcall key the screen goes black then it comes right back on by itslef. I have no programs running in the background. I have soft reset the phone, even taking the battery out. The screen goes off fine while charging. I have also tried cleanRAM on level 3, with no sucess. I dont have any special ROM, just CHT2 and various mods. Any help please!
I know you probably do not want to hear this, but if you have checked your display settings and the are all good. Then it is probably time for a hard reset.
yea, i was starting to mentally prepare for that now. the problem is seeming to "chill out" alittle. its not doing it as bad as it was yesterday. i thought it fixed itself for awhile today, then it started doing it again. it drains my battery so fast when that happens. its like a pulsing from dim to bright until i push any button or on the screen. thanks for your help. if you think of anything else let me know.
same problem
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
airhuri said:
Hi!
I have a same problem!!!! I am using energy rom...But I think it does not matters. I already did hard reset and it didnt help!!!! And there is nothing wrong with buttons, becouse, when I push them they normally light up, but in this process u described( totally same in my phone ) Thew display just go bach to light, but lights on buttons not...So there isnt problem with bad connection or so.... I am really in **** with this And it wont be better man believe me...Got it almost week...sometimes its better but..... ANYONE PLS HELP!!!
Click to expand...
Click to collapse
If a hard reset didn't help you, then you have a hardware issue for sure.
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
tippingvan said:
i've noticed on mine, if it starts acting up. I put it on the charger for a sec. then it acts normal after i disconnect it. Do you think this could be from water damage? I havent gotten any water on my phone that i know of, though.
Click to expand...
Click to collapse
Kinda sounds like you may not be getting correct voltage to your screen or out of your battery. I say this cause you mentioned plugging in your charger helps for a little while. Have you had a good look at your battery pins on your HD2?
There is nothing wrong with pins...Today my phone work better....But still sometimes keep screen on...what a mystery...
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
tippingvan said:
did a hard reset, nothing changed. called tmobile, got a replacement coming, no charge. guess thats the only way.
Click to expand...
Click to collapse
So, that sounds like a HW problem, lucky enough to get free replacement
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
airhuri said:
unfortuntly it wont work for me (( Cause i did HSPL and stuff..... But I noticed, that sometimes when i start to charge my phone it actually gets better for some time... Any thoughts?
Or can u pls ask the t-mobile for me where was the prolem in your phone? Thanks..
Click to expand...
Click to collapse
You can remove HSPL and revert it back to SPL by using the HSPL utility, remember it asked which version you want to install. Just click on the link in my sig for HSPL. and download it. Then rum the utility and select the correct SPL version for your current ROM.
Or flash the stock ROM for your HD2 via SD card. Go to the link below to learn how.
http://forum.xda-developers.com/showthread.php?t=681317
Hey
After 2 years of using my HTC HD2 I have a problem with ON/OFF key.
It just stop working. I think it's not a key problem, because even if it's not responding if I'm pressing it it's sometimes turn my phone ON or OFF by itself.
I would live with that, letting him to just turn OFF after one minute not using it and turn it ON be pressing any other key but it also drains battery a lot.
Even if I'm not using it (during the night) the battery power in the morning is about 35% (after full charge in the evening).
I thought it might be some OS problem so I have done hard reset and went back to default OS.
This fixed the problem, but after 2 weeks it's back again.
Is there someone out there who had this problem?
Does anyone know any solution?
Thanks
farral
Ps. Sorry for my English as it's not my native language.
have no idea
i have a problem there too
my hang up button, most of the time cause the touch screen to stop working
mikyyy_123 said:
have no idea
i have a problem there too
my hang up button, most of the time cause the touch screen to stop working
Click to expand...
Click to collapse
the same here. this is a hardware fault. i have luck. my hd2 is in warranty. hope yours too.
regards, interceptor
Yeah, it looks like a hardware problem but there is a strange thing. When I take the battery out for an hour or longer and then put it back in, everything works as normal for some time (an hour or so). Isn't it strange?
So now I'm thinking about two solutions.
Disassemble my HD2 and take a look at it from inside
or
just check and install Android on it (maybe its not a hardware issue)
Do you know where can I find assemble instruction for HD2?
I have unscrewed those 4 screws but don't know what next. Cant find any snaps.
I'm not worrying about disassemble it as I have done it with my previous HTC HD and it's very simple, until you know what to do.
Edit: I have found disassembling and assembling instruction video on YouTube.
I put here links to it if someone need it
Disassembling - http://youtu.be/cL-jnUKufC4
Assembling - http://youtu.be/t8Q7mXdcJ54
I think it's time to try to fix it.
Or maybe I should get an insurance first?
Hi guys,
I bought a second hand mini pro, and flashed (rooted, unlocked bootloader)it with the help of one of the several guides. with Simplexity and MiniCM7
It seemed to work fine at first, but now something odd happens.
I can only turn the device on (working) when I keep the keyboard slided out. When I start up with it slided in, The screen is turned on but no image appears: It stays black.
When it is turned on (slided out) I can use the phone normally. But when I slide it back in, the screen is frozen and won't react to touches.
Putting the phone in and out of standby (slided out) will have two possible outcomes: Either its usable as normal. Or it simply won't come out of standby at all. The phone seems to react (sounds) to pressing the buttons on the keyboard though.
I used Seus and manual methods to reflash to stock, try other kernels, but the problems remain.
I think it's the hardware that's failing but maybe this can be caused by the flashing as well?
Are there any methods to rule out one or the other?
Cherek said:
Hi guys,
I bought a second hand mini pro, and flashed (rooted, unlocked bootloader)it with the help of one of the several guides. with Simplexity and MiniCM7
It seemed to work fine at first, but now something odd happens.
I can only turn the device on (working) when I keep the keyboard slided out. When I start up with it slided in, The screen is turned on but no image appears: It stays black.
When it is turned on (slided out) I can use the phone normally. But when I slide it back in, the screen is frozen and won't react to touches.
Putting the phone in and out of standby (slided out) will have two possible outcomes: Either its usable as normal. Or it simply won't come out of standby at all. The phone seems to react (sounds) to pressing the buttons on the keyboard though.
I used Seus and manual methods to reflash to stock, try other kernels, but the problems remain.
I think it's the hardware that's failing but maybe this can be caused by the flashing as well?
Are there any methods to rule out one or the other?
Click to expand...
Click to collapse
I'm responding to the thread's title : It's a hardware failure.Brick means you can't even power it on/flash mode.If I helped click the "Thanks" button.Also,try using nAa-11 my and x10man's ROM called XMP Rom and tell us if you still have this problem.I understand that you posted this here (If you post it in questions section almost no one will respond )so I won't tell about that.
(Oh, my bad. Mods feel free to move my thread)
I was afraid of that. I'll try your ROM as well, but I'm afraid its the hardware too.
Thankfully I only paid 30 euros for it
I think the flex cable is gone bad, i have the same problem here. My mobile doesnt respond to any touches. First it happened only when i would slide the keyboard. But now its dead as a whole
speedsys said:
I think the flex cable is gone bad, i have the same problem here. My mobile doesnt respond to any touches. First it happened only when i would slide the keyboard. But now its dead as a whole
Click to expand...
Click to collapse
The XMP rom didn't fix it, so I guess you're right. Would a flex cable (those are the flat orange ones right?) be expensive?
Cherek said:
The XMP rom didn't fix it, so I guess you're right. Would a flex cable (those are the flat orange ones right?) be expensive?
Click to expand...
Click to collapse
I hope you fix it
This is the cable we are having a problem with, i have given my mobile for replacing this stuff as i couldnt get this locally. This board houses the LCD and the digitizer and the buttons connect to this. The black cable goes to the motherboard. Its pretty simple to take apart the phone, but take care while doing so. Another thing its that, when you are opening the display panel, its better to use a guitar pick instead of a screwdriver and open it at the latches, that would avoid damage to the outer plastics.
http://www.ebay.co.uk/itm/BRAND-NEW...K_Replacement_Parts_Tools&hash=item3f0ddd12f3