Related
Hi , everyone well here's what happened i tried to unlock my bootloader did alot of crap there and no its not unlocked yet so now problem is i reflashed back azuzu's upgrade kernal and everything is back to normal now thats great problem is i have no reception well my sim on the coverage bar its a X there the phone cannot find my operator anymore what should i do thank you in advanced
same thing happened to me at first. did you check if you were eligible for unlocking the bootloader with the too provided?? i dont remember exactly what i did but i restated the whole process of unlocking the bootloader and flash the doomlords kernel. (BUT MAKE SURE YOU ARE ELIGIBLE FOR IT)
i never checked that was my bad my mistake.. is there anyway i could get back my operator
fcb1 said:
same thing happened to me at first. did you check if you were eligible for unlocking the bootloader with the too provided?? i dont remember exactly what i did but i restated the whole process of unlocking the bootloader and flash the doomlords kernel. (BUT MAKE SURE YOU ARE ELIGIBLE FOR IT)
Click to expand...
Click to collapse
it happened to you , so what did you do to get your operator back?
if i may , could you please give me links to refer to? or links to download certain things i need?
manually put in your apn settings. that might help. or you can try relocking your bootloader. or just check if your phone is eligible to have its bootloader unlocked and retry unlocking it
edit* i dont remeber exactly what i did. i just restarted the whole process and successfuly unlocked the bootloader which some how brought back signal. is your phone carrier unlocked??
how do i manually put in my apn settings? how to relock my bootloader as well? i'm sorry for asking so much but i really don't know what im doing
how do i check if my phone carrier is unlocked or not?
http://forum.xda-developers.com/showthread.php?t=1259617&highlight=relock+bootloader
and to put in your apn settings you need to find that somewhere on the internet. that link is to relock your bootloader. im not sure if putting in your apn settings will work because you might have lost radio capabilities.
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
llbug:[\\?\USB#VID_0FCE&PID_E12E#CB511KMM1N#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "The system cannot find the file specified"
Elapsed:18 secs.
Try reflashing 2.3.3 from flashtool...
http://forum.xda-developers.com/attachment.php?attachmentid=713763&d=1315496032
use this tool to check if your phone is carrier unlocked and to see if your phone is eligible for unlocked bootloader. it should say you have a se certficate or something like that
http://forum.xda-developers.com/showthread.php?t=1254087&highlight=relock+bootloader
sahibunlimited said:
Try reflashing 2.3.3 from flashtool...
Click to expand...
Click to collapse
stock 2.3.3 is there a link? if your answer is yes then i should just reflash the stock 2.3.3 right?
yes thats what hes saying
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
llbug:[\\?\USB#VID_0FCE&PID_E12E#CB511KMM1N#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "The system cannot find the file specified"
Elapsed:18 secs.
when i tried to check my phone eligibility
did you enter in flashmode
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1234-2561_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511N457W
SEMC SIMLOCK CERTIFICATE
Elapsed:42 secs.
its supposed to look like this. it has to have semc simlock certificate. if not you might have lost radio capability completey.
how do i go into flash mode
ok when it says to plugin the turned off phone, turn it off, hold the back button and plug it in while holding the back buton. the little green light should be on the whole time you are in flashmode
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
llbug:[\\?\USB#VID_0FCE&PID_E12E#CB511KMM1N#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "The system cannot find the file specified"
Elapsed:29 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
Elapsed:165 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1241-1846_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511KMM1N
SEMC SIMLOCK CERTIFICATE
Elapsed:14 secs.
so please tell me what to do right now? dear sir?
ok good you are eligible before you started trying to unlock the bootloader, did you downgrade your kernel with the flashtool?? and are you on 2.1 or 2.3?? and i belive that lower case r means your bootloader is unlocked. so flash doomlords kernel for unlocked bootloaders using the flashtool. if done properly you should not see the white sony ericcson letters
---------- Post added at 11:52 AM ---------- Previous post was at 11:48 AM ----------
http://forum.xda-developers.com/showthread.php?t=920746
flashtool
http://forum.xda-developers.com/showthread.php?p=17659880#post17659880
doomlords kernel
you are gonna need to update to 2.3 for all this. and when you tryed unlocking, were you on 2.1??
I have a X10minipro (U20a) with the M76XX-TSNCJOLYM-53404015 baseband, latest (2.1.1.A.0.6) firmware - just updated/repaired using PC Companion.
I just tried to flash Cm7.1.0 RC1 FXP028's kernel in this phone (first step of the install guide, http://forum.xda-developers.com/showthread.php?t=1212949), but it won't boot. It doesn't even display any logo at all (no FXP logo, nor Sony Ericsson logo). After pressing the power button, I can feel the usual little vibration it makes when powering up. After that, the phone gives no other life sign - the screen just keeps black forever.
I'm not sure, but when the usb cable is connected, it appears that the phone enters into some sort of loop in and out of flash mode. The green LED blinks shortly and I can see the usb device being detected as the flash mode device (eg. on lsusb) for a short period of time. And I haven't pressed the back button at all.
Of course, flashing back the stock kernel unbricks the phone.
The bootloader was unlocked using msm7227_semc. Just to be sure it was unlocked correctly, I flashed D4Kernel v1.2 (http://forum.xda-developers.com/showthread.php?t=1254202), and it worked like a charm. So the bootloader appears to be working well.
Does anybody have an idea of what is going on? Maybe I was expected to flash another version of the baseband?
If you got FXP kernel to work in your phone, please tell me if you can see any difference between your phone and mine (versions, etc.)
I found it strange that U20_CUSTOM.ftf, when opened using flashtool, shows "E10" in the column "Device". But perhaps this is just a typo.
Additional info (s1tool output):
Code:
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): U20a
SOFTWARE VERSION: 1235-3408_2.0.A.0.504
CUSTOM VERSION: 1238-8213_R6B
FILESYSTEM VERSION: WORLD-1-2-5_2.1.1.A.0.6
SERIAL NO: BY9008UWWE
SEMC SIMLOCK CERTIFICATE
Thank you
Have you discovered the problem yet ? I have a similiar problem and how can you reflash the stock kernel if it doesn't even turn on or connect with computer ?
thotypous said:
I have a X10minipro (U20a) with the M76XX-TSNCJOLYM-53404015 baseband, latest (2.1.1.A.0.6) firmware - just updated/repaired using PC Companion.
I just tried to flash Cm7.1.0 RC1 FXP028's kernel in this phone (first step of the install guide, http://forum.xda-developers.com/showthread.php?t=1212949), but it won't boot. It doesn't even display any logo at all (no FXP logo, nor Sony Ericsson logo). After pressing the power button, I can feel the usual little vibration it makes when powering up. After that, the phone gives no other life sign - the screen just keeps black forever.
I'm not sure, but when the usb cable is connected, it appears that the phone enters into some sort of loop in and out of flash mode. The green LED blinks shortly and I can see the usb device being detected as the flash mode device (eg. on lsusb) for a short period of time. And I haven't pressed the back button at all.
Of course, flashing back the stock kernel unbricks the phone.
The bootloader was unlocked using msm7227_semc. Just to be sure it was unlocked correctly, I flashed D4Kernel v1.2 (http://forum.xda-developers.com/showthread.php?t=1254202), and it worked like a charm. So the bootloader appears to be working well.
Does anybody have an idea of what is going on? Maybe I was expected to flash another version of the baseband?
If you got FXP kernel to work in your phone, please tell me if you can see any difference between your phone and mine (versions, etc.)
I found it strange that U20_CUSTOM.ftf, when opened using flashtool, shows "E10" in the column "Device". But perhaps this is just a typo.
Additional info (s1tool output):
Code:
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): U20a
SOFTWARE VERSION: 1235-3408_2.0.A.0.504
CUSTOM VERSION: 1238-8213_R6B
FILESYSTEM VERSION: WORLD-1-2-5_2.1.1.A.0.6
SERIAL NO: BY9008UWWE
SEMC SIMLOCK CERTIFICATE
Thank you
Click to expand...
Click to collapse
The kernel that comes with CM 7.1 is broken, you need to use a older version of FXP, there's one in the mini pro dev and flash the just the kernel but I can't find the kernel any were for the mini pro, the mirrors come up as X8. I've been told that it still has bugs.
Sent from my U20i using xda premium
henzx said:
Have you discovered the problem yet ? I have a similiar problem and how can you reflash the stock kernel if it doesn't even turn on or connect with computer ?
Click to expand...
Click to collapse
As danlivesey said, the custom kernel from FXP is broken. When I posted this, nobody had complained yet (people complained only when they released FXP030), so I thought I was doing something wrong.
To reflash the stock kernel, download "X10 mini pro (U20) stock kernel" from this thread: http://forum.xda-developers.com/showthread.php?t=1254225
Then use flashtool to flash the ftf file. You should be able to put your phone in flash mode. If your are not able, probably it is stuck frozen trying to boot, then just remove the battery and insert it again and follow the procedure again (keeping the back button pressed and inserting the USB cable).
Hi,
I tried to unlock my Neo bootloader using test point method with Setool1 so I don't lose DRM compatibility of my phone.
Here is the program log:
Code:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
Elapsed:24 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
supported phone was not detected
Elapsed:70 secs.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "r4A069"
SEMC SIMLOCK CERTIFICATE, PROCEEDING
FINISHED
Elapsed:153 secs.
I have installed CWM recovery on my locked bootloader, after unlocking I installed SE Tweak ROM, but my phone didn't boot up, and it showed Sony Ericson Logo for minutes. Then I recovered my phone to stock rom using SEUS.
I want to know how I can be sure that my bootloader is unlocked?
If my bootloader is unlocked why didn't SE tweak work?
U can check in service menu.. Service menu>service info>configuration> boatloader status
Flashing a custom Rom usually takes time to boot.. I had similar experience
Sent from my MT15i using Tapatalk
Congratulation! Your Bootloader has been unlocked!
Code:
RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "r4A069"
As I can see from log above,the loader version is r4A069, small 'r' at the beginning of the version indicate that your bootloader has been unlocked!
some signs of hope
Kirankj1724 said:
U can check in service menu.. Service menu>service info>configuration> boatloader status
Flashing a custom Rom usually takes time to boot.. I had similar experience
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
I had "bootloader unlock allowed:Yes" in "Rooting status" in configuration which didn't chaned even after I tried to unlock my bootloader. there is no bootloader status in this page.
How much minutes should it take to boot up for the first time?
zackie012 said:
Congratulation! Your Bootloader has been unlocked!
Code:
RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "r4A069"
As I can see from log above,the loader version is r4A069, small 'r' at the beginning of the version indicate that your bootloader has been unlocked!
Click to expand...
Click to collapse
Thanks, But I could not flash SE Tweak rom, it stuck in the first boot, I waited for 5 mins but no result.
What could be possibly the reason for this?
Do I have to install CWM for unlocked bootloaders? cause I had installed CWM before unlocking using this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=1364509
Hi!! I have been trying to unlock the bootloader for the past couple of hours without any success. This is the log from s1tool. Can anyone tell me if my bootloader is unlocked??
11/1/2012 9:38:32 μμ Welcome to S1 identify tool
11/1/2012 9:38:38 μμ
11/1/2012 9:38:38 μμ TO CONNECT NEXT PHONES
11/1/2012 9:38:38 μμ X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
11/1/2012 9:38:38 μμ LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
11/1/2012 9:38:38 μμ PRESS AND HOLD "BACK" BUTTON...
11/1/2012 9:38:38 μμ
11/1/2012 9:38:38 μμ PLEASE ATTACH TURNED OFF PHONE NOW
11/1/2012 9:38:38 μμ
11/1/2012 9:39:24 μμ
11/1/2012 9:39:24 μμ RUNNING S1_EROM VER "R8A029"
11/1/2012 9:39:24 μμ SOFTWARE AID: 0001
11/1/2012 9:39:24 μμ LOADER AID: 0001
11/1/2012 9:39:26 μμ FLASH ID: "00EC/00BC"
11/1/2012 9:39:26 μμ LOADER VERSION: "R4A045"
11/1/2012 9:39:26 μμ
11/1/2012 9:39:26 μμ MODEL (from GDFS): E10i
11/1/2012 9:39:26 μμ SOFTWARE VERSION: 1235-3408_2.1.1.A.0.6
11/1/2012 9:39:26 μμ CUSTOM VERSION: 1235-5386_R6B
11/1/2012 9:39:26 μμ FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
11/1/2012 9:39:26 μμ SERIAL NO: CB511MXHB3
11/1/2012 9:39:26 μμ
11/1/2012 9:39:26 μμ SEMC SIMLOCK CERTIFICATE
11/1/2012 9:39:26 μμ Elapsed:48 secs.
I runing a bit desparete here so any help is extremely appreciated!
It seems that you didn't do some steps correctly.
You need to find exactly where your TP is.
Exactly the same result with a Movistar Spain Neo V. Stuck on SE screen after flash, and cannot access to the fastboot mode by presing menu key.
Kirankj1724 said:
U can check in service menu.. Service menu>service info>configuration> boatloader status
Flashing a custom Rom usually takes time to boot.. I had similar experience
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
i dont think service menu will show the bootloader status as unlocked if done by s1toool...it will still show the status as unlockable.
My Bootloader Unlocked?
Hi There,
Im new to this and i didn't want to open a new thread unnecessarily so i'll post my question here because its similiar.
I have a Xperia Neo i think its branded to TMN, and i wanted to Unlock the bootloader, i did the *#*#7378423#*#* --> Server Info --> Configuration and i didn't had the frase Rooting Status. I Searched the threads trying to figure how could i Unlock it, didn´t find away... I'm a bit stuborn and tried the Testpoint test, and i don't know if it worked here is what i got:
Code:
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini pro
LT15 Xperia Arc,MT15 Xperia Neo, R800 Xperia Play
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID:0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_3.0.1.A.0.145
CUSTOM VERSION: 1247-5729_R14C
FILESYSTEM VERSION: WORLD-1-8_3.0.1.A.0.145
SERIAL Nº: **********
SEMC SIMLOCK CERTIFICATE
Elapsed: 11 secs
If it worked i can't fastboot... If it didn't then i dont know what to do, is it possible for a branded phone, that doesnt say nothing about Rooting status, to get Unlocked?
Tks in advance!
For me,i unlocked my bootloader at 1st attempt at http://unlockbootloader.sonymobile.com/ because i think its the easy one...
I think entering fastboot mode and try
Code:
fastboot boot recoveryNeo.img
will be a good idea.
If it isn't bootloader unlocked it won't let you boot.
Otherwise it is unlocked.
Kirankj1724 said:
U can check in service menu.. Service menu>service info>configuration> boatloader status
Flashing a custom Rom usually takes time to boot.. I had similar experience
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Sorry for the silly question, I just recently switched to the neo v. Where can I find the service menu.?
Sent from my MT11i using XDA
Earayil said:
Sorry for the silly question, I just recently switched to the neo v. Where can I find the service menu.?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
enter *#*#7378423#*#* and then service info and then configuration
Found it.
It shows
Bootloader unlock alowed:yes
So does this mean it is still locked?
Sent from my MT11i using XDA
Earayil said:
Found it.
It shows
Bootloader unlock alowed:yes
So does this mean it is still locked?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Its means you can unlock
Hi tks for the responses,
For me,i unlocked my bootloader at 1st attempt at *******because i think its the easy one...
Click to expand...
Click to collapse
Unfortunate this doesn't work for me because theres a phrase that's states
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Click to expand...
Click to collapse
And my status is missing so i guess i cant unlock it?
I think entering fastboot mode and try
Code:
fastboot boot recoveryNeo.img
will be a good idea.
If it isn't bootloader unlocked it won't let you boot.
Otherwise it is unlocked.
Click to expand...
Click to collapse
I can't enter fastboot though so i guess its locked... And that's my question, is it possible to unlock it, is there anyway?
Tks again
Davidmiranda said:
And my status is missing so i guess i cant unlock it?
Click to expand...
Click to collapse
Missing like, you don't see that line?
What fw version you have on your phone?
Davidmiranda said:
I can't enter fastboot though so i guess its locked... And that's my question, is it possible to unlock it, is there anyway?
Click to expand...
Click to collapse
You can't enter fastboot? Have you tried "fastboot devices"
Is your phone SIM locked?
Missing like, you don't see that line?
What fw version you have on your phone?
Click to expand...
Click to collapse
Yes that line doesn't appear... And my FW version is
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_3.0.1.A.0.145
CUSTOM VERSION: 1247-5729_R14C
FILESYSTEM VERSION: WORLD-1-8_3.0.1.A.0.145
You can't enter fastboot? Have you tried "fastboot devices"
Is your phone SIM locked?
Click to expand...
Click to collapse
No i tried turnning off the phone pressing all buttons cant get the blue light, tried fastboot devices that i dont know, and my phone SIM is locked yes.
Im really lost, gona check more into this, tks for the help, and keep it coming
Davidmiranda said:
Yes that line doesn't appear... And my FW version is
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_3.0.1.A.0.145
CUSTOM VERSION: 1247-5729_R14C
FILESYSTEM VERSION: WORLD-1-8_3.0.1.A.0.145
No i tried turnning off the phone pressing all buttons cant get the blue light, tried fastboot devices that i dont know, and my phone SIM is locked yes.
Click to expand...
Click to collapse
My bad for asking questions, now I see yout post#9 above, strange didn't notice it earlier.
Anw,
1) you have old fw version, thats why you don't see that line. update your fw with flashtool to .42 or .62.
2) you have sim-locked phone, thats why your fastboot is locked. you need to pay to sim-unlock your phone and by that you will enable your fastboot. find user with nick jinx13 or anyone else with setool, or use some of online services, but my advise is to use setool.
My bad for asking questions, now I see yout post#9 above, strange didn't notice it earlier.
Anw,
1) you have old fw version, thats why you don't see that line. update your fw with flashtool to .42 or .62.
2) you have sim-locked phone, thats why your fastboot is locked. you need to pay to sim-unlock your phone and by that you will enable your fastboot. find user with nick jinx13 or anyone else with setool, or use some of online services, but my advise is to use setool.
Click to expand...
Click to collapse
Ok so i did something really stupid and i thought since i didn't think i used testpoint correctly i used OTA to upgrade my phone well it got bricked.... after freakin searching for over 4 hours found the solution and got my phone updated to .62 and running. I can finnaly see the phrase Rooting status: Bootloader unlock allowed: No
So that is done tomorrow gona track down jinx13 or someone that has setool to unlock my SIM card.
Tks again and ill keep u posted
hello guys
here is my issue....
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
any help?
Confirm again with stool that if ur bl unlocked or locked.
Vınce said:
Confirm again with stool that if ur bl unlocked or locked.
Click to expand...
Click to collapse
yes it is unlocked. i used flashtool 0.9.8
alienwrz said:
yes it is unlocked. i used flashtool 0.9.8
Click to expand...
Click to collapse
You do use flashmode, and not fastboot i hope?
SmG67 said:
You do use flashmode, and not fastboot i hope?
Click to expand...
Click to collapse
ofcourse flashmode mate
unlock bootloader
I didn't know you can unlock the bootloader with flashtool. I used another tool (attachment)
Just connect your phone with debugging mode turned on and open "msm7227_semc" from the zip and follow the instructions.
This worked perfectly for me. After finished, just reboot the phone, then its unlocked. Then you can install a custom kernel with flashtool.
pls tell me if it has worked
TheDiddyhamster said:
I didn't know you can unlock the bootloader with flashtool. I used another tool (attachment)
Just connect your phone with debugging mode turned on and open "msm7227_semc" from the zip and follow the instructions.
This worked perfectly for me. After finished, just reboot the phone, then its unlocked. Then you can install a custom kernel with flashtool.
pls tell me if it has worked
Click to expand...
Click to collapse
There are actually three different methods to unlock the bootloader, which one to use depends on the status of your phone. Flashtool does actually do a decent job in deciding which method (including the one you mention here) to use. It's in the plugins menu.
I would like to ask alienwrz to post a slightly more extensive part of the flashtool output, and maybe the output of the identify-button in S1Tool.
SmG67 said:
There are actually three different methods to unlock the bootloader, which one to use depends on the status of your phone. Flashtool does actually do a decent job in deciding which method (including the one you mention here) to use. It's in the plugins menu.
I would like to ask alienwrz to post a slightly more extensive part of the flashtool output, and maybe the output of the identify-button in S1Tool.
Click to expand...
Click to collapse
ok i will look for verification of BL status via s1tool. i will post the screens asap. i will try the method given by above person aswell
alienwrz said:
ok i will look for verification of BL status via s1tool. i will post the screens asap. i will try the method given by above person aswell
Click to expand...
Click to collapse
Code:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): E10i
SOFTWARE VERSION: 1235-3408_2.1.1.A.0.6
CUSTOM VERSION: 1237-8595_R4B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
SERIAL NO: CB511S1RTD
SEMC SIMLOCK CERTIFICATE
Elapsed:57 secs.
so it is unlocked. even then i cant flash it via flashtool in flashmode. any help?
alienwrz said:
Code:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): E10i
SOFTWARE VERSION: 1235-3408_2.1.1.A.0.6
CUSTOM VERSION: 1237-8595_R4B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
SERIAL NO: CB511S1RTD
SEMC SIMLOCK CERTIFICATE
Elapsed:57 secs.
so it is unlocked. even then i cant flash it via flashtool in flashmode. any help?
Click to expand...
Click to collapse
Where did you get the kernels from (the actual links may be useful) and what sizes are they?
(You did unlock the bootloader, so it's not directly a problem with flashing per se, because unlocking involves flashing a new loader to the phone, maybe your anti-virus could be interfering with flashing the actual kernels)
SmG67 said:
Where did you get the kernels from (the actual links may be useful) and what sizes are they?
(You did unlock the bootloader, so it's not directly a problem with flashing per se, because unlocking involves flashing a new loader to the phone, maybe your anti-virus could be interfering with flashing the actual kernels)
Click to expand...
Click to collapse
Code:
https://code.google.com/p/minicm/downloads/list
e10_13,14 etc. my phone is robyn.
and yeah i will try with av off my av is essential from MS
SmG67 said:
Where did you get the kernels from (the actual links may be useful) and what sizes are they?
(You did unlock the bootloader, so it's not directly a problem with flashing per se, because unlocking involves flashing a new loader to the phone, maybe your anti-virus could be interfering with flashing the actual kernels)
Click to expand...
Click to collapse
i did with av off.... it still gives same error
EDIT: i started flashing kernel from release 1 (i.e) E10_nAa-01_2.6.29.6-nAa-01.ftf till E10_nAa-11_2.6.29.6-nAa-11.ftf but i couldn't flash from 12-14 and ics, jb.... any help?
Hi, i owned a xperia mini pro (u20i). i rooted it, flashed nAa 's lastest jb kernel an cm10. i want to return to stock rom, but i can't access the flashmode. it just boots into the cwm recovery.
before i unlocked the bootloader my phone was NOT simlocked. after unlocking it it returend simlock.
i searched the forum but couldn't find a thread with my problem. pls help!
buntstifte said:
Hi, i owned a xperia mini pro (u20i). i rooted it, flashed nAa 's lastest jb kernel an cm10. i want to return to stock rom, but i can't access the flashmode. it just boots into the cwm recovery.
before i unlocked the bootloader my phone was NOT simlocked. after unlocking it it returend simlock.
i searched the forum but couldn't find a thread with my problem. pls help!
Click to expand...
Click to collapse
Do you mean to say you lost your network when you unlocked the bootloader?
That means your simlock-certificate wasn't compatible with the unlock-procedure, which you get warned against if you read it all properly.
Use SUS (SEUS) to repair your phone., and then use S1Tool (NOT flashtool) to restore your bootloader, by pressing the RESTORE-button.
Step 1: leave your phone disconnected from the computer
Step 2: choose 'update' in SEUS, it will say 'no updates available'
Step 3: choose the 'repair' link, it will let you select your phone-model and download the firmware
Step 4: when it asks for flashmode, connect your usb-cable to the phone and your computer, and then press home- and power-buttons at the same time.
Step 5: Start S1Tool and press Restore button, follow the instructions
Hope your signal will come back, there is no guarantee.
SmG67 said:
Do you mean to say you lost your network when you unlocked the bootloader?
That means your simlock-certificate wasn't compatible with the unlock-procedure, which you get warned against if you read it all properly.
Use SUS (SEUS) to repair your phone., and then use S1Tool (NOT flashtool) to restore your bootloader, by pressing the RESTORE-button.
Step 1: leave your phone disconnected from the computer
Step 2: choose 'update' in SEUS, it will say 'no updates available'
Step 3: choose the 'repair' link, it will let you select your phone-model and download the firmware
Step 4: when it asks for flashmode, connect your usb-cable to the phone and your computer, and then press home- and power-buttons at the same time.
Step 5: Start S1Tool and press Restore button, follow the instructions
Hope your signal will come back, there is no guarantee.
Click to expand...
Click to collapse
Yes. But i wonder why. My phone wasunlocked(Sim)i followed the. Steps of the bl unlock guide. I d have aborted flashing if my sim certificate were Bad.myquestion is why i cant enter flashmode with jb kernel? Phone is still worrking except network its booting etc ...
I ll try your explained tips in the afternoon. My s1tool log i ll put here later
buntstifte said:
Yes. But i wonder why. My phone wasunlocked(Sim)i followed the. Steps of the bl unlock guide. I d have aborted flashing if my sim certificate were Bad.myquestion is why i cant enter flashmode with jb kernel? Phone is still worrking except network its booting etc ...
I ll try your explained tips in the afternoon. My s1tool log i ll put here later
Click to expand...
Click to collapse
It kind of depends on how your phone was sim-unlocked i suppose, and it's not that unlocking restores your simlock, it just disables the radio-capabilities, no matter which sim you put in.
If you tried the manual bootloader-unlock method, there are a few options you can use, maybe the other one may give you success.
Just boot up your phone after the unlocking process and check the network before you do anything else, like flashing kernels and stuff.
And entering flashmode had never been a problem for me, not on JB and not on stock. It's usually a case of just turning your phone off and only putting it in flashmode (ie, press the backbutton and plug in the cable) when the program (Flashtool or SEUS or PC Companion) asks for it.
If you try to put it in flashmode before the program is ready it will boot up.
my s1tool log when unlocking bl yesterday.
08.04.2013 23:16:54 Welcome to S1 tool.
08.04.2013 23:17:10
08.04.2013 23:17:10 TO CONNECT NEXT PHONES
08.04.2013 23:17:10 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
08.04.2013 23:17:10 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
08.04.2013 23:17:10 PRESS AND HOLD "BACK" BUTTON...
08.04.2013 23:17:10
08.04.2013 23:17:10 PLEASE ATTACH TURNED OFF PHONE NOW
08.04.2013 23:17:10
08.04.2013 23:17:20
08.04.2013 23:17:20 RUNNING S1_EROM VER "R8A029"
08.04.2013 23:17:20 SOFTWARE AID: 0001
08.04.2013 23:17:20 LOADER AID: 0001
08.04.2013 23:17:22 FLASH ID: "0020/00BC"
08.04.2013 23:17:22 LOADER VERSION: "R4A045"
08.04.2013 23:17:22
08.04.2013 23:17:22 MODEL (from GDFS): U20i
08.04.2013 23:17:22 SOFTWARE VERSION: 1235-3411_2.1.1.C.0.0
08.04.2013 23:17:22 CUSTOM VERSION: 1238-7168_R5B
08.04.2013 23:17:22 FILESYSTEM VERSION: WORLD-1-8_2.1.1.C.0.0
08.04.2013 23:17:22 SERIAL NO: CB511L3Z8F
08.04.2013 23:17:22
08.04.2013 23:17:22 SEMC SIMLOCK CERTIFICATE
08.04.2013 23:17:22 Elapsed:11 secs.
SmG67 said:
Do you mean to say you lost your network when you unlocked the bootloader?
That means your simlock-certificate wasn't compatible with the unlock-procedure, which you get warned against if you read it all properly.
Use SUS (SEUS) to repair your phone., and then use S1Tool (NOT flashtool) to restore your bootloader, by pressing the RESTORE-button.
Step 1: leave your phone disconnected from the computer
Step 2: choose 'update' in SEUS, it will say 'no updates available'
Step 3: choose the 'repair' link, it will let you select your phone-model and download the firmware
Step 4: when it asks for flashmode, connect your usb-cable to the phone and your computer, and then press home- and power-buttons at the same time.
Step 5: Start S1Tool and press Restore button, follow the instructions
Hope your signal will come back, there is no guarantee.
Click to expand...
Click to collapse
i have still the same problem. if i put the battery out and wait 10 secs put it back in the cell boots right away. even when i press the home and power button while i am quickly putting the usb cable in. i hardly can't connect my cell to pc in flashmode. when i am pressing the back button like sony updater tells me the same thing happens. as long as i press a key nothing happens doesn't matter how long i press it.
when i release it, the phone boots normally jb.
ok, i booted up cm while having phone plugged in. removed battery and put it right back in. right in this moment the led turned green and i hopefully gained into flashmode!
so i gained network back thanks for your help!
i performed all the steps again to unlock my bootloader and had success. i recognized that i run the wrong msm7227_semc.cmd .
thread can be closed. and again thanks for your help! :victory: