Hello,
I have problem with my GT-S5830i it was stuck on samsung logo. So i decided to reinstall stock firmware. I found splitted firmware but it's for United Kindgdom but i did it anyways. I've put CSC, PDA, MODEM, PIT files. and now as i am From Georgia it's only catches 1-2 out of max frequency. I tried to find firmware for Georgia but couldn't. Before i had Bulgarian firmware could someone help me to split it?
http://www.sammobile.com/firmwares/3/?download=16052
Regards
Related
Hi guys.
I really need to return to swedish stock firmware on my GT-P7510 but I can't find it anywhere. The csc on the original firmware is NSE. Is there anyway to mess with kies to upgrade it to original NSE. Or if someone has tips on how to get swedish stock firmware back I would be extremely grateful.
Best regards, Martin.
Go to samfirmware.com and the Swedish rom should be there?
Will have to be flashed through Odin, if you don't mind a non-Swedish, but official Samsung, check this site:
http://www.teamovercome.net/p7500/?page_id=5 and check section ' Backin’ Up Yer Data & Apps…'
Sent from my GT-P7510 using XDA Premium HD app
No the firmware isnt available on sammobile. Maybe it would work if igot the csc-files for NSE and then update it OTA? But where do i get those?
I assume the celtic region covers Sweden? Last I checked it was covered under that.
Im currently on an UK-firmware and tyis is not right. The swedish one comes with some swedish bloatware. The uk one i have installed is 3.1. If i could only change the csc to nse instead of xeu as it says now I probably would get the rigt firmware OTA? i remember there was an 3.2 update OTA when i bought the Tab. Am i wrong with my theory, or you think it will work?
Flash a celtic region via Odin.
By celtic you mean?? Because i have flashed the uk/ireland firmware with odin and this doesn't contain the NSE csc.
Does anyone know where to get hold of csc files for either NSE or NEE?
Shouldnt they be included via SIM pack? Most sim's come preloaded with the carrier's APN and such
No. Those files are region codes in the samsung firmware. These files make the update-server decide which fw to send to the phone/tab.
Sent from my GT-I9100 using Tapatalk
But that shouldn't matter as sooner or later the ICS release will be one general update, It would be like IOS firmware, one general firmware for all regions. Region wise can be determined via IP Address as far as I know. When I had my tab flashed with a malaysian region firmware *Bought it online* as soon as It reached Middle East (where i received it) the update was available via Kies for Middle East update, and not the Asian firmware one.
Then again, why the hassle of kies, Odin for the win. Flashing different regional firmwares since 2007
I cant find the firmware to flash with odin, most of them are taking me to hotfile but it was already deleted anyone can help me find the link?
You can find it in samfirmware.com
Enviado desde mi GT-S5830 usando Tapatalk
Stock Firmware S5830 - Different Versions
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
check if your GSM band frequency is same with those of Europe this could be causing the issue, or your phone is locked to a carrier.
zeppman1979 said:
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
Click to expand...
Click to collapse
After flashing new rom, try factory reset and wipe cache.
Sent from my GT-S5830 using Tapatalk
zeppman1979 said:
Hello All,
New here and was wondering why when installing different stock firmwares from Sam Firmware the website for my Samsung S5830 (this is for use in Latin America - Mexico), when installing let's say a European stock firmware which is newer than the stock firmware that Samsung release for Latin America (2.3.4 vs 2.3.5 or 2.3.6 or 2.3.7), using Odin it allows you to install the firmware that you are trying to use but it never boots up and keeps cycling through the booting images of Samsung and the logo. If the phone is flashed using the stock firmware for Latin America this does not occur at all. Procedure is run as suggested with the .ops file and the home.tar file but still does not work if you try to use European or any other firmwares.
Any clue on what could be the problem here?
Thank You
Click to expand...
Click to collapse
After flashing, wipe cache and data.
Hi,
Well so here is my situation, according to Sammobile my country (Chile) is getting Jelly bean now:
http://imageshack.us/photo/my-images/12/89289021.jpg/
The problem is that my phone is unbranded and none of those 2 CSC is my CSC. MY CSC is I9300OJVBLH1 and I don't know if the unbranded version of the phone will even get the update here or not, and I'm honestly sick of waiting.
There are countries with my CSC that have already gotten JB, but I have never used Odin or any kind of program to flash my phones (I had a Galaxy S2 before)
So my quesiton for you guys, that know way more than I do about this: Should i keep waiting for JB to get it through KIES? (I've checked on Kies and OTA and it says that my firmware is up to date) or should I just flash my phone? In case I should flash it... what Firmware should I get, the one with my CSC from another country or the one for my own country but with a different CSC?
If updating manually through Odin is your recommendation, could you please walk me through it? Will this increase my flash count?
Thank you very much for all your help!!!
Please guys, help!
Recently, out of nowhere my phone got in a bootloop and now I want to flash the stock firmware using odin. I went searching on samsung-updates.com and sammobile.com but for both I couldn't find firmware for Belgium. Does it need to be Belgium or is this the same for a group of countries? Also my phone was rooted.
Thanks in regards.
Hi,
First post here so please help.
I am in UK and have a note 4 n910G, i was running ok with UK SIM but had to hard reset due to crashing and freezing. Now it seems its reverted back to original csc and no matter which Firemware i flash (even tried CM14.1) the CSC doesnt change to European so i can chose BTU.
Im currently running
N910GDTU1BOC7
LRX22C.N910GDTU1BOE1
android 5.0.1
Ive searched for 2 weeks now and not getting anywhere, is there actually a firmware for Europe or do i have to flash seperate modem etc?
thanks
chris