Hi !
I'm trying to go back to full stock and I just want to make sure I'm not making a mistake
According to this post :
http://forum.xda-developers.com/showthread.php?p=41977487
I can either download the MDK or the ME7 or the MI1
I have currently a custom ROM
http://forum.xda-developers.com/showthread.php?p=41977487
with the ME7 baseband (radio)
which one should I flash under ODIN ? (MDK, ME7 or MI1)
Thanks for your help !
LinkinParkmetre said:
Hi !
I'm trying to go back to full stock and I just want to make sure I'm not making a mistake
According to this post :
http://forum.xda-developers.com/showthread.php?p=41977487
I can either download the MDK or the ME7 or the MI1
I have currently a custom ROM
http://forum.xda-developers.com/showthread.php?p=41977487
with the ME7 baseband (radio)
which one should I flash under ODIN ? (MDK, ME7 or MI1)
Thanks for your help !
Click to expand...
Click to collapse
Your phone appears to have the MDK bootloader, so you should flash a MDK factory image. Don't ruin it by installing later releases.
Hi, i just bought my note 2 and ive already unlocked it and rooted it, i want to use a ROM that has 4.3 Jelly Bean like the N3BULA ROM, it says flash the MJ9 OTA Firmware using Odin. But on the forums there is a forum called "Once you're unlocked don't use odin to flash custom ROMs"
1. I should be able to flash the MJ9 using odin safely right because its not a custom rom right?
2. How do i flash the MJ9 update using odin?
3. Once i flash the MJ9 update can i still use non 4.3 ROM?
Question 1: You are correct.
Question 2: Download, then extract with 7zip. Put phone into download mode. Open Odin on computer and connect the phone. Place extracted md5 into the pda slot and hit start. It'll do it's thing and your phone will reboot and be done.
Question 3: Yes as long as don't take the OTA update from Samsung you will able load roms as usual
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
pacedrum69 said:
Once my phone is in download mode, odin doesn't recognize my phone. Any reason why ? I'm so frustrated
Click to expand...
Click to collapse
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
synapsesboob said:
Check your drivers. If you've used casual, sometimes removing those drivers will help and by also installing updated Samsung drivers.
If you've done all of the above and it's still not recognized. I recommend trying a different USB cable.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ive tried everything :-/ ugh
whn flashing in odin will a pit file also be needed (wana flash stock mj9)
I didn't need it..
Sent from my SCH-I605 / Galaxy Note 2 / JB 4.3 / Unlocked, Rooted and ROMed... using Tapatalk v 2.4.13
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Whats the problem? Does Odin Start doing it atleast??
pacedrum69 said:
I cannot get it to work :-/
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Bonkurei said:
sometimes it happen to me to,
if driver is not the issue, then try close the odin and unplugged the cable, plug it back then start odin.
Click to expand...
Click to collapse
Info that may help: I searched here in xda not on this device or I'd post a link, for how to install Odin and found that for each Samsung device there are some set of Odin versions that are compatible. I used Odin just now (took less than a minute) version 3.07 for my phone. Note that my drivers were already installed and working since I unlocked the bootloader a year ago. For others: it simply rebooted afterwards and all is well.
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Mr_Denni said:
Can anyone give me the download link for MJ9 OTA Firmware by Beans?
Thanks
Click to expand...
Click to collapse
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
Here's a link where you can grab the MJ9 firmware provided by Beanstown106... ( http://forum.xda-developers.com/showthread.php?t=2578458 ). Look down on the first post of the thread for the link to "Full Firmware Package" that you need to flash in Odin...that will bring you to the Android file host where you can download Beanstown106's file-- "toltevzw_mj9_official_firmware.tar.md5.7z."
Also, here's a link to a post with more detailed instructions on how to Odin flash it after you download and unzip the file... ( http://forum.xda-developers.com/showthread.php?p=50047714&highlight=unzip#post50047714 ).
Please make sure to do a thanks to BeansTown106 for the firmware file and to sithjedi333 for the helpful instructions.
Click to expand...
Click to collapse
Thank you very much, bro for your links :good:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
washburnky said:
Hey guys instead of starting a new thread I thought I would ask here... I just bought a rooted note 2 on craigslist and it has the N3bula rom on it, but it is the first version. It is a little slow for me, so i wanna flash the N3bula 2 rom, but I am not sure if I have the MJ9 thing on my phone. Is there any way to check?
Click to expand...
Click to collapse
settings > about device > look the baseband version it shoud say like this I605VRUEMJ9
but since its already run on N3bula i think its already on MJ9.
MJ9 Flashing failed
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
hazemsalah said:
I tried to flash the MJ9 firmware many times through odin , but every time it fails on the modem.bin .... any ideas ?
Click to expand...
Click to collapse
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
hazemsalah said:
Also while installing 4.1.2 VRAMC3 stock unrooted rom , the odin fails at modem.bin
I never took the 4.3 OTA
I can run the TWRP recovery and install custom roms [4.1.2 CleanROM V5] , but the baseband version is unknown and the network is not working , even i have installed VRAM3 Modem or VRALL4
Note: I have flashed the ND7 modem and MJ9ModemParam before while trying to install 4.4.2 roms
Im stuck now , and can not use the mobile network
Please Help!!
Click to expand...
Click to collapse
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
lacoursiere18 said:
Go to General Section and look at the Data Corruption thread. Directions are there for flashing a Stock Recovery. Do a factory reset with stock recovery. Try that and report back..I have a flashable modem as well so let us know..
Click to expand...
Click to collapse
I did , but still the same
Is someone has a odin package to flash?
I am using NA3 now. Kies shows no update and when i click firmware upgrade is says device's version cannot be updated.
@starmaster10 Do you have stock unmodificated NA3 firmware?
dsanke said:
@starmaster10 Do you have stock unmodificated NA3 firmware?
Click to expand...
Click to collapse
This rom ROOT_JDQ39.I527MVLUBNA3.tar by @krazykipa is the only really good working NA3 stock rom which is rooted already and is a roger's rom, but the rogers stuff can be removed if that is not your carrier as it is just a couple of items only i believe to remove, this rom should work for you, but if the phone has been update to the new kk NE5 rom then this rom most likely will not work for you...just unpack it first after download is complete and then use odin to flash it.
So I have the I9205 with C-Rom, 4.4.3...I want to go back to stock firmware but all I can find is Jellybean...I know with knox there's no going back but I can't find kk stock....no help from the evil f*cks at Google. Can I try to flash what I've already found? How about the Portuguese version though that's jb too?
In case it's needed: I9205XXUCNA2
Lianthe said:
So I have the I9205 with C-Rom, 4.4.3...I want to go back to stock firmware but all I can find is Jellybean...I know with knox there's no going back but I can't find kk stock....no help from the evil f*cks at Google. Can I try to flash what I've already found? How about the Portuguese version though that's jb too?
In case it's needed: I9205XXUCNA2
Click to expand...
Click to collapse
All the latest firmwares are here: http://www.sammobile.com/firmwares/1/?model=GT-I9205&pcode=0. Just download the one you want and flash it with odin.
shivwest said:
All the latest firmwares are here: http://www.sammobile.com/firmwares/1/?model=GT-I9205&pcode=0. Just download the one you want and flash it with odin.
Click to expand...
Click to collapse
Thanks for the link. So it doesn't matter which one I use? Even though I'm on 4.4.3?
Hi all , I'm trying to return my phone to stock firmware via Odin (latest odin) and I keep getting FAILED message in Odin...
My current set-up is replusa latest rom 5.3 and I updated boot loader and modem via Rom ...
I have downloaded latest BTU and XEU firmware and load all into Odin but starts to flash and then I get FAILED
Looking to return to stock to sell phone
I know knox is gone for good , but just want to flash stock firmware
Thanks in advance
leegreggs said:
Hi all , I'm trying to return my phone to stock firmware via Odin (latest odin) and I keep getting FAILED message in Odin...
My current set-up is replusa latest rom 5.3 and I updated boot loader and modem via Rom ...
I have downloaded latest BTU and XEU firmware and load all into Odin but starts to flash and then I get FAILED
Looking to return to stock to sell phone
I know knox is gone for good , but just want to flash stock firmware
Thanks in advance
Click to expand...
Click to collapse
I am not sure if the rom you use is using the latest base.
If that is the case, the BTU/XEU has not updated yet... you can use XEF which is the French version. That has latest base and should flash.
stonedpsycho said:
I am not sure if the rom you use is using the latest base.
If that is the case, the BTU/XEU has not updated yet... you can use XEF which is the French version. That has latest base and should flash.
Click to expand...
Click to collapse
Thank you will try
Also you don't reported which Odin version you was using. you need Odin 3.13.1 to flash Oreo firmware.
And you can't downgrade the bootloader. So you need to flash a stock Rom with same or newer bootloader like already installed.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Logel said:
Also you don't reported which Odin version you was using. you need Odin 3.13.1 to flash Oreo firmware.
And you can't downgrade the bootloader. So you need to flash a stock Rom with same or newer bootloader like already installed.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
I used the latest odin and now just trying to find the latest firmware , I'm downloading XEF the French firmware that the previous comment mentioned
I would use the stock firmware with the manufacturer CSC of the device.
And there is a log window in Odin that shows logs of the flash process. There showing often useful informations. So next time make a screenshot with this logs and post it here
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts