Install Stock ROM - Now No network - Moto E Q&A, Help & Troubleshooting

Hi,
I downloaded stock rom from http://sbf.droid-developers.org/phone.php?device=34
filename : RETUAWS_XT1023_4.4.3_KXC21.5-34_cid9_CFC.xml.zip
And follows steps given in
http://forum.xda-developers.com/showthread.php?t=2759495
But looks like I mess-up something.
My phone start fine, but it does not recognise sim. No mobile network detected.
I am from india & my moto-e is dual sim.
Please check the image attached, I guess I install wrong rom.
Please tell me how I make my phone working again
https://www.dropbox.com/s/65u647l83sx544s/Screenshot_2014-07-20-11-56-44.png

anieruddha said:
Hi,
I downloaded stock rom from http://sbf.droid-developers.org/phone.php?device=34
filename : RETUAWS_XT1023_4.4.3_KXC21.5-34_cid9_CFC.xml.zip
And follows steps given in
http://forum.xda-developers.com/showthread.php?t=2759495
But looks like I mess-up something.
My phone start fine, but it does not recognise sim. No mobile network detected.
I am from india & my moto-e is dual sim.
Please check the image attached, I guess I install wrong rom.
Please tell me how I make my phone working again
https://www.dropbox.com/s/65u647l83sx544s/Screenshot_2014-07-20-11-56-44.png
Click to expand...
Click to collapse
Flash the one for XT1022. retaildsds_condor or something like that. Hit thanks if I helped. :laugh:

dem0nicbl00d said:
Flash the one for XT1022. retaildsds_condor or something like that. Hit thanks if I helped. :laugh:
Click to expand...
Click to collapse
see I use following two
"
Android 4.4.3
Blur_Version.21.12.34.condor_retuaws.retuaws.en.US"
and
"
Android 4.4.3
Blur_Version.21.12.34.condor_retca.retca.en.CA"
both have condor & for me both have same issue i.e. sim card not detected.
can you pinpoint me any link, it will be really helpful.

anieruddha said:
see I use following two
"
Android 4.4.3
Blur_Version.21.12.34.condor_retuaws.retuaws.en.US"
and
"
Android 4.4.3
Blur_Version.21.12.34.condor_retca.retca.en.CA"
both have condor & for me both have same issue i.e. sim card not detected.
can you pinpoint me any link, it will be really helpful.
Click to expand...
Click to collapse
I also have the same problem!!! Tried everything but now just have a useless phone that I cannot use!

Flash condor_retaildsds.retaildsdsall.en.03.zip for India.
Sent from my XT1022 using XDA Premium 4 mobile app

Here is the Thread that will helps you to flash Stock Firmware[Indian version] . :good:
http://forum.xda-developers.com/showthread.php?t=2753069

anieruddha said:
see I use following two
"
Android 4.4.3
Blur_Version.21.12.34.condor_retuaws.retuaws.en.US"
and
"
Android 4.4.3
Blur_Version.21.12.34.condor_retca.retca.en.CA"
both have condor & for me both have same issue i.e. sim card not detected.
can you pinpoint me any link, it will be really helpful.
Click to expand...
Click to collapse
FIXED MINE!!!
Did this:
fastboot erase system
Then follwed the normal procedure for installing the stock ROM. And now I have a working phone!!!

orionmb said:
FIXED MINE!!!
Did this:
fastboot erase system
Then follwed the normal procedure for installing the stock ROM. And now I have a working phone!!!
Click to expand...
Click to collapse
which stock rom you use, please give me link.

anieruddha said:
which stock rom you use, please give me link.
Click to expand...
Click to collapse
We are in a different country so I doubt you would want to use the UK 02 ROM single SIM version.

Thanks all
Thanks all
forum link provded by user 'mrpkarthik' solve issue. I downloaded stock rom from mediafire link provided in that forum
again thanks all.

Related

[Q] How to flash a different stock image with a locked bootloader

Got a Cricket Moto E.
Removed sim lock.
Bootloader is locked and cannot be unlocked.
The Cricket 4.4.4 ROM is crippled with all tethering options disabled. PDANet works for USB tethering, but not for Wifi
Saw this page http://forum.xda-developers.com/showthread.php?t=2755857&page=12 with 4.4.4 factory images.
Tried to switch by flashing retail as described in http://forum.xda-developers.com/showthread.php?t=2759495
According to post #3 in that thread - it should work
Q1: Will this work on locked bootloaders?
Ans: Yes as stock firmwares are digitally signed by Motorola.
Howeever I'm getting
(bootloader) Preflash validation failed
FAILED (remote failure)
when try to flash the retail version.
The bottom line - I need wifi tethering, not even a different firmware and/or root.
What are my options, if any?
TIA.
BUMP! This is becoming quite a common phone (for 50$ it's a great deal). However the locked bootloader is quite a roadblock for those (like me) who go crazy running stock firmware, whether it be so you can tweak your kernel settings for optimal battery life/performance, use xposed framework (gotta save those snapchats), use tethering apps or just so you can run Pimp My ROM..
I'm hoping that my post on this will draw some sort of attention to this issue.
Maybe the images you are using are for 4.4.2
Maybe the images are for 4.4.2. I faced such a situation long time ago and have found this:
https://s.basketbuild.com/devs/percy_g2/Moto_E
Download the zip file present in the link. That is 4.4.4 and flash these images
shanmukhateja said:
Maybe the images are for 4.4.2. I faced such a situation long time ago and have found this:
https://s.basketbuild.com/devs/percy_g2/Moto_E
Download the zip file present in the link. That is 4.4.4 and flash these images
Click to expand...
Click to collapse
That's the dual SIM model firmware. The firmware we would need on Cricket is the XT1021 model. XT1022 is Dual SIM, XT1025 is has built a in digital TV tuner hope this clears a bit up for ya.
Oh thank you for clarifying!
Btw. can you post a screenshot of the "About Phone" so as to get some details of your required ROM.
Sent from my XT1022 using XDA Free mobile app
shanmukhateja said:
Oh thank you for clarifying!
Btw. can you post a screenshot of the "About Phone" so as to get some details of your required ROM.
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
Here you go.
Did you ever happen to find out a solution ? I have the same problem with my cricket moto e and cant seem to find anything that will recover it from its current softbricked state. Thanks in advance.
NfamousDroid said:
Did you ever happen to find out a solution ? I have the same problem with my cricket moto e and cant seem to find anything that will recover it from its current softbricked state. Thanks in advance.
Click to expand...
Click to collapse
One here with the same problem, can be solved or no? I think is problem because for the motherboard u.u

[Q] Need help!!! no service on moto e after flashing stock rom

hello guys, first of all excuse my english its not my main language. i really need your help! about a week ago, i unlocked the bootloader/rooted my moto e XT1021 and put cm12 nightly on it. after a couple of days, it asked me to do a cyanogenmod system update via OTA, so i did. but when it first booted the phone after that, it kept saying that the user UI crashed, everytime. so i couldn't go anywhere on my phone! I tried wiping cache and dalvik cache, nothing worked. so i wiped all the data on my phone and unroot it and put a stock firmware on it. at this point, i saw that i did not have any signal on my phone, but I taught it wasnt really important, so i re-rooted it and I flashed cm12 again. It worked great but i didnt have no service.. so i check on google and all that to see if i could fix this, i tried flashing the rom with TWRP and CWM, and it didnt change anything. I tried flashing an earlier version of the cm12 nightly, didnt work. now i put back the stock rom again, nothing is working! oddly, when i look in about phone > status, I CAN see my phone number and my IMEI are there. but it says that radio is off. for that, i tried doing *#*#4636#*#* in my dialer to go in the phone information menu to activate the radio, but nothing worked. and when i go to my quick settings, I can see that my airplane mode is off, but when i hold the power button and see the shut down options, it tells me that my airplane mode is on! I really dont know what to do, and i really need your help. i know its a long read, but please help me out! if you need more info just tell me maybe i forgot some things.. thanks alot
durocherwilliam said:
hello guys, first of all excuse my english its not my main language. i really need your help! about a week ago, i unlocked the bootloader/rooted my moto e XT1021 and put cm12 nightly on it. after a couple of days, it asked me to do a cyanogenmod system update via OTA, so i did. but when it first booted the phone after that, it kept saying that the user UI crashed, everytime. so i couldn't go anywhere on my phone! I tried wiping cache and dalvik cache, nothing worked. so i wiped all the data on my phone and unroot it and put a stock firmware on it. at this point, i saw that i did not have any signal on my phone, but I taught it wasnt really important, so i re-rooted it and I flashed cm12 again. It worked great but i didnt have no service.. so i check on google and all that to see if i could fix this, i tried flashing the rom with TWRP and CWM, and it didnt change anything. I tried flashing an earlier version of the cm12 nightly, didnt work. now i put back the stock rom again, nothing is working! oddly, when i look in about phone > status, I CAN see my phone number and my IMEI are there. but it says that radio is off. for that, i tried doing *#*#4636#*#* in my dialer to go in the phone information menu to activate the radio, but nothing worked. and when i go to my quick settings, I can see that my airplane mode is off, but when i hold the power button and see the shut down options, it tells me that my airplane mode is on! I really dont know what to do, and i really need your help. i know its a long read, but please help me out! if you need more info just tell me maybe i forgot some things.. thanks alot
Click to expand...
Click to collapse
You most probably flashed the wrong firmware for your device. You need to find the correct firmware or a firmware for the same region, e.g. if you have a UK version device then the EU firmware should work too, but if you flash the Brazilian firmware you will lose GSM signal. If you flash the wrong firmware version and then flash any custom ROM you will still not have GSM signal, so you need to flash the correct firmware and then the custom ROM.
If you are unsure which is the correct firmware for your device, go to bootloader mode, open command window (cmd.exe) and enter the following:
Code:
fastboot getvar ro.build.version.full
You will get the correct firmware version in output.
panart said:
You most probably flashed the wrong firmware for your device. You need to find the correct firmware or a firmware for the same region, e.g. if you have a UK version device then the EU firmware should work too, but if you flash the Brazilian firmware you will lose GSM signal. If you flash the wrong firmware version and then flash any custom ROM you will still not have GSM signal, so you need to flash the correct firmware and then the custom ROM.
If you are unsure which is the correct firmware for your device, go to bootloader mode, open command window (cmd.exe) and enter the following:
Code:
fastboot getvar ro.build.version.full
You will get the correct firmware version in output.
Click to expand...
Click to collapse
hi, my device is a canada variant, and when i enter the command i get this : Blur_version.20.11.15.condor.retu
and i tried to download the stock firmware from the site sbf.droid-developers but whenever i try to go on the site it says file not found ect... i cant find a download for the canadian variant of my phone!!
durocherwilliam said:
hi, my device is a canada variant, and when i enter the command i get this : Blur_version.20.11.15.condor.retu
and i tried to download the stock firmware from the site sbf.droid-developers but whenever i try to go on the site it says file not found ect... i cant find a download for the canadian variant of my phone!!
Click to expand...
Click to collapse
You didn't paste the complete version so i can't read it (version is broken in 2 lines).
Is it RETCA XT1023? If yes try flashing this.
panart said:
You didn't paste the complete version so i can't read it (version is broken in 2 lines).
Is it RETCA XT1023? If yes try flashing this.
Click to expand...
Click to collapse
this is the whole thing : (bootloader) ro.build.version.full[0]: Blur_Version.20.11.15.condor_retu
(bootloader) ro.build.version.full[1]: glb.retuglb.en.US
ro.build.version.full: Done
finished. total time: 0.016s
im not sure if its xt1023 or xt1021 but when i plug it on my computer to as a media device its written xt1021
Check Imei no.
Try *#06# and check whether it is okay or not!?
SuperMan(Alex) said:
Check Imei no.
Try *#06# and check whether it is okay or not!?
Click to expand...
Click to collapse
yes i do see my IMEI
durocherwilliam said:
this is the whole thing : (bootloader) ro.build.version.full[0]: Blur_Version.20.11.15.condor_retu
(bootloader) ro.build.version.full[1]: glb.retuglb.en.US
ro.build.version.full: Done
finished. total time: 0.016s
im not sure if its xt1023 or xt1021 but when i plug it on my computer to as a media device its written xt1021
Click to expand...
Click to collapse
Blur_Version.20.11.15.condor_retuglb.retuglb.en.US
That is a retail US variant, not sure if it's XT1023 or XT1021 though, you can find out by reading the label on the box of your device.
You can find the stock firmwares for US devices here.
If this doesn't help you then write a post in this thread and OP (lost101) can probably help you out.
panart said:
Blur_Version.20.11.15.condor_retuglb.retuglb.en.US
That is a retail US variant, not sure if it's XT1023 or XT1021 though, you can find out by reading the label on the box of your device.
You can find the stock firmwares for US devices here.
Click to expand...
Click to collapse
damn I dont have the box with me well I will try both and I will tell you if its working! thanks alot for the files man
durocherwilliam said:
damn I dont have the box with me well I will try both and I will tell you if its working! thanks alot for the files man
Click to expand...
Click to collapse
No problem, i edited my previous post and added some info so be sure to read it again.
panart said:
No problem, i edited my previous post and added some info so be sure to read it again.
Click to expand...
Click to collapse
alright thanks im downloading the us variant for the xt1021, if it doesnt work im gonna try the xt1023 one, the download is slow so it'll take a while but i'll let you know the results! if this work man your a hero lol
durocherwilliam said:
alright thanks im downloading the us variant for the xt1021, if it doesnt work im gonna try the xt1023 one, the download is slow so it'll take a while but i'll let you know the results! if this work man your a hero lol
Click to expand...
Click to collapse
Actually i'm not a hero, in fact i was in the same boat as you. I didn't have the stock ROM (or its details) for my device when i flashed CM11 so when i wanted to return to the stock ROM i found an XT1021 US stock ROM thinking that because it's XT1021 it should work on my GB device, i flashed it and the outcome was: no GSM signal. Then i posted in the thread i shared in my previous post and the OP (lost101) found the GB stock ROM for me, i flashed it and got GSM signal back.
panart said:
Actually i'm not a hero, in fact i was in the same boat as you. I didn't have the stock ROM (or its details) for my device when i flashed CM11 so when i wanted to return to the stock ROM i found an XT1021 US stock ROM thinking that because it's XT1021 it should work on my GB device, i flashed it and the outcome was: no GSM signal. Then i posted in the thread i shared in my previous post and the OP (lost101) found the GB stock ROM for me, i flashed it and got GSM signal back.
Click to expand...
Click to collapse
hello again, on my box it says XT1023 and I try the us retail version which is : RETUAWS_XT1023_4.4.4_KXC21.5-53_cid9_CFC.xml and it doesn't work. now I am downloading the canada retail version : RETCA_XT1023_4.4.4_KXC21.5-40_cid14_CFC.xml.zip and I hope it will work
panart said:
Actually i'm not a hero, in fact i was in the same boat as you. I didn't have the stock ROM (or its details) for my device when i flashed CM11 so when i wanted to return to the stock ROM i found an XT1021 US stock ROM thinking that because it's XT1021 it should work on my GB device, i flashed it and the outcome was: no GSM signal. Then i posted in the thread i shared in my previous post and the OP (lost101) found the GB stock ROM for me, i flashed it and got GSM signal back.
Click to expand...
Click to collapse
finally i got it by flashing the canada retail firmware ! thank you very much !
durocherwilliam said:
finally i got it by flashing the canada retail firmware ! thank you very much !
Click to expand...
Click to collapse
Glad to hear you got it sorted out!
Xt1022
Hi, I have simillar problem with my moto e (xt1022 - french version). I already tried a lot of stock versions of Kitkat, Lolipop and CM 11.
But radio is still not working, I was trying to decribe my problem here: http://forum.xda-developers.com/moto-e/help/xt1022-service-status-radio-off-t3049496
Do you have other ideas, how to solve it?
moto e no service
my friends, and sorry for calling you just like that but im just needing some really good help!!!! id ont even really know hiw to really thread but ok, moto e xt1022, got tried a lot, like im just getting crazy know, here the issue: after some misterious process de phone has not signal, but there is nothing wrong with my signal, im registered on carrier, but even showing full bar indicateor says not service on configurationes, please help, thanks. i flashed, with moto tools, with mfastboot, im getting crazy with those motos g and e dudes...
bro
durocherwilliam said:
damn I dont have the box with me well I will try both and I will tell you if its working! thanks alot for the files man
Click to expand...
Click to collapse
flash kit kat rom
imei comes to null
flash lolipop rom it fix the
help
panart said:
Glad to hear you got it sorted out!
Click to expand...
Click to collapse
please do you have the GB rom i have the XT1072 device but when i try flashing it, it says image file too big, then i flashed the XT1068 eu version it worked but no gsm or wifi
lucifermorn said:
please do you have the GB rom i have the XT1072 device but when i try flashing it, it says image file too big, then i flashed the XT1068 eu version it worked but no gsm or wifi
Click to expand...
Click to collapse
Sorry, i don't have Moto E or G anymore. BTW you are posting in MOTO E XT1021 forum, XT1068 and XT1072 are Moto G 2nd gen.

REQUEST: OK2 sprint Baseband (modem&hlos.bin)

Can someone please create a Sprint Galaxy Note EDGE COK2 Baseband file that can be flashed via ODIN, I created one but I just cannot get it to flash without an error, if not can someone confirm that COK2 can be successfully rooted and deodexed......? Please
dinaps86 said:
Can someone please create a Sprint Galaxy Note EDGE COK2 Baseband file that can be flashed via ODIN, I created one but I just cannot get it to flash without an error, if not can someone confirm that COK2 can be successfully rooted and deodexed......? Please
Click to expand...
Click to collapse
Here you go buddy. Click the thanks button
https://www.dropbox.com/s/cp7udteavd52ko6/N915P-OK2-modem_only.tar?dl=0
edit. Just noticed that you want the modem and NON-HLOS >>
https://www.dropbox.com/s/3ttjkhgun1e61i1/N915P-OK2-Modem+NON-HLOS.tar?dl=0
Can i rename this file to .zip and flash it through twrp?
Sent from my SM-N915P using XDA Free mobile app
Thank you
my sim card don't work in note edge ( invalid sim card )
i need some help plz
link not working
supreme83 said:
Here you go buddy. Click the thanks button
https://www.dropbox.com/s/cp7udteavd52ko6/N915P-OK2-modem_only.tar?dl=0
edit. Just noticed that you want the modem and NON-HLOS >>
https://www.dropbox.com/s/3ttjkhgun1e61i1/N915P-OK2-Modem+NON-HLOS.tar?dl=0
Click to expand...
Click to collapse
hey your link is not working. my note edge 915p basband is unknown. how can i solve t
kkboykk said:
hey your link is not working. my note edge 915p basband is unknown. how can i solve t
Click to expand...
Click to collapse
sorry i no longer have the file since a hdd failure. If i can i will look around and post a new one. Your best bet is actually to flash a stock odin package. It should repair any baseband issues unless you have lost/corrupted your efs

[HELP] No Service on any ROM (Kenzo)

Hello Guys, I'm kinda new here, but I hope you can help me.
A couple of weeks ago I reseted my phone to system settings, as it started to reboot I switched it off by pushing the power button for a few seconds, because I dind't need my phone at that time.
Well, It turned out it was a bad idea to do that, because after that I kept getting bootloops over and over, even the phone wouldn't stop restarting.
After some time I figured it out how to flash roms. I flashed, I think it was modifided miui 7.3.6.0 fastboot rom( to unlock bootloader, official way dind't work for me) via edl mode, and everything worked fine again, except camera and mobile network.
Maybe I try another rom, I thought maybe some rom that has nothing to do with miui.
Well, I just installed latest CM 13 (via twrp, I managed to open my bootloader) and, boom, camera was working again!
But after putting my SIM Card in, I was dissapointed: Mobile network still wasn't working (card is working in other phone)
I tried Pac-man but still getting same results.
What can I do? Please help, I can't afford a new phone now
If you want MIUI Rom than you have to flash Stock MIUI Rom via edl mode and in MiFlash tool select clean all option which is located at the bottom of the MiFlash tool. If you want custom Rom like Cm13 and RR Remix or any cyanogenmod based Rom than you have to flash The Rom, Gapps and Firmware file for Cm13. If you are not getting mobile network than simply flash Firmware file via TWRP recovery than your problem will be solved. I am providing you the link for Cm13 Firmware and Gapps. Hope it will solve your problem. Hit thanks if i helped you.
CM13 Firmware: https://www.androidfilehost.com/?fid=24591000424951192
Gapps: http://opengapps.org/
Thanks for replying me!
I made now a dirty flash with the firmware file from your link, but I still getting no service
Maybe I forgot to mention above that the sim card is beeing detacted, that means I can see my brands' name in the settings.
Here a video : http://bit.do/no_service_kenzo
Some countries don't allow unrecognised phones to be used with their mobile services eg: France
nomistune said:
Some countries don't allow unrecognised phones to be used with their mobile services eg: France
Click to expand...
Click to collapse
Really?
I live normally in Germany, but now I'm in Poland for one week.
The sim card I am using right now is a polish one, maybe I should try my german one?
Edit : No it's not working either
Could you post your source (@nomistune) ? I can't find it.
In Germany all worked fine.
No one? ?
have you checked your IMEI ?
IMEI lost can cause no service.
in case you lost your IMEI, you can use this tutorial. But make sure you are on MIUI ROM.
https://forum.xda-developers.com/redmi-note-3/how-to/flash-recover-efs-snapdragon-t3406789
I checked my IMEI by typing *#06# on dialler, but I got a note with two IMEI Numbers, so I guess that's not the problem.
bberchtka said:
I checked my IMEI by typing *#06# on dialler, but I got a note with two IMEI Numbers, so I guess that's not the problem.
Click to expand...
Click to collapse
Just checked on mine, I too have 2 different codes so I'm assuming that's normal (phone is fitted with 1 sim only)
---------- Post added at 11:02 PM ---------- Previous post was at 11:00 PM ----------
nomistune said:
Some countries don't allow unrecognised phones to be used with their mobile services eg: France
Click to expand...
Click to collapse
What do you mean with "unrecognized"?
---------- Post added at 11:04 PM ---------- Previous post was at 11:02 PM ----------
If I were you, I would put the phone in EDL mode & flash the latest global xiaomi rom. If it still doesn't work you're probably facing a hardware issue
Given that we now know your imei are fine it would be wise to remove that screenshot you made.
People can impersonate your phone by knowing those numbers.
bberchtka said:
I checked my IMEI by typing *#06# on dialler, but I got a note with two IMEI Numbers, so I guess that's not the problem.
Click to expand...
Click to collapse
As MrColdbird already said you should better remove the screenshot. Otherwise everyone can steal your unique IMEI and set them on their own phones and also other things.
Regards
OrdenKrieger
Before flashing cm13, you need to flash appropriate firmware which can be found in thread, here is cm13 firmware :: https://www.androidfilehost.com/?fid=24591000424951192
Wipe everything, flash this firmware. And then flash cm13
--------------
Or if you want to flash LineageOS 14.1 then you need to flash appropriate firmware of 14.1 before flashing 14.1 :: this :: https://drive.google.com/file/d/0B803ZxoErIryOVZvOFNIcVppMkU/view
BabyTedhu said:
. . . Wipe everything. . .
Click to expand...
Click to collapse
Do I have to wipe internal storage too?
OrdenKrieger said:
As MrColdbird already said you should better remove the screenshot. Otherwise everyone can steal your unique IMEI and set them on their own phones and also other things.
Regards
OrdenKrieger
Click to expand...
Click to collapse
Could you please unquote my post, the screenshot is still visible :laugh: .
bberchtka said:
Do I have to wipe internal storage too?
Click to expand...
Click to collapse
No
BabyTedhu said:
No
Click to expand...
Click to collapse
Great, I'm trying it know with lineagos.
Guys i use one sim and i only have 2 imei numbers but are the same. Please help me solve this? Using nOs
RootNightmareX said:
Guys i use one sim and i only have 2 imei numbers but are the same. Please help me solve this? Using nOs
Click to expand...
Click to collapse
Is it just that? Everything else works? So I would't care. :good:
bberchtka said:
Great, I'm trying it know with lineagos.
Click to expand...
Click to collapse
So I tried it, and unfortunately it was a bad choice. Now my sim isn't detected at all and wifi and bluetooth aren't working after reboot. Guess I'm trying it know wirh MIUI global.
bberchtka said:
Is it just that? Everything else works? So I would't care. :good:
Click to expand...
Click to collapse
The 2nd imei was the one that gave me the warranty...

Stock firmware required without System, Data,cache for Gionee F103 Pro

Firmware required without system,data,cache as these three partitions are kinda big.
Firmwares in following link is not working for me (tried more than 5-6 times download but all zips are getting corrupted maybe due to server problem or else.)
https://firmwarefile.com/gionee-f103-pro
Kindly give me a firmware without system, data cache if anyone have a backup of it.
Thanks in advance.
abkdmn said:
Firmware required without system,data,cache as these three partitions are kinda big.
Firmwares in following link is not working for me (tried more than 5-6 times download but all zips are getting corrupted maybe due to server problem or else.)
https://firmwarefile.com/gionee-f103-pro
Kindly give me a firmware without system, data cache if anyone have a backup of it.
Thanks in advance.
Click to expand...
Click to collapse
Really?!!!!!!
The stock firmware is a SYSTEM and DATA and CACHE and other stuff.
You're looking for am empty bottle!!!
MigoMujahid said:
Really?!!!!!!
The stock firmware is a SYSTEM and DATA and CACHE and other stuff.
You're looking for am empty bottle!!!
Click to expand...
Click to collapse
Seems tho, can you provide ?
abkdmn said:
Seems tho, can you provide ?
Click to expand...
Click to collapse
No there is nothing like the one you want, only full firmware here:
https://firmwarefile.com/gionee-f103-pro
If you use SP flash tool you can choose whatever you want to flash.
MigoMujahid said:
No there is nothing like the one you want, only full firmware here:
https://firmwarefile.com/gionee-f103-pro
If you use SP flash tool you can choose whatever you want to flash.
Click to expand...
Click to collapse
what is the difference between these :
Gionee_F103_Pro_0301_T5370
Gionee_F103_Pro_0301_T5741
Gionee_F103_Pro_0301_T5907
abkdmn said:
what is the difference between these :
Gionee_F103_Pro_0301_T5370
Gionee_F103_Pro_0301_T5741
Gionee_F103_Pro_0301_T5907
Click to expand...
Click to collapse
It could be the phone model number(3 models) and it might be the baseband or even the software version.
What is your model number?
It should be in about device in settings, or written under the battery cover or on the back of the phone.
MigoMujahid said:
It could be the phone model number(3 models) and it might be the baseband or even the software version.
What is your model number?
It should be in about device in settings, or written under the battery cover or on the back of the phone.
Click to expand...
Click to collapse
i found that f103_0301_T5907 is the build numbers, my last android version was android 6.0
so which one i should download and flash?
abkdmn said:
i found that f103_0301_T5907 is the build numbers, my last android version was android 6.0
so which one i should download and flash?
Click to expand...
Click to collapse
Apparently the newest one is the one with highest number, so this is the one:
Gionee_F103_Pro_0301_T5907
Which is the one you already have.
MigoMujahid said:
Apparently the newest one is the one with highest number, so this is the one:
Gionee_F103_Pro_0301_T5907
Which is the one you already have.
Click to expand...
Click to collapse
I had downloaded this "Gionee_F103_Pro_0301_T5907.zip" which didn't worked for me. I dunno which one should i download next? mind if you can help me with this. I have forgotten my build number.
abkdmn said:
I had downloaded this "Gionee_F103_Pro_0301_T5907.zip" which didn't worked for me. I dunno which one should i download next? mind if you can help me with this. I have forgotten my build number.
Click to expand...
Click to collapse
You have to find a way to get the build number, i can't help you without it.
Check the back of the device, under the battery, or check the box where the phone was.
MigoMujahid said:
You have to find a way to get the build number, i can't help you without it.
Check the back of the device, under the battery, or check the box where the phone was.
Click to expand...
Click to collapse
Problem Solved Man HI5 :V :highfive::highfive::highfive:
abkdmn said:
Problem Solved Man HI5 :V :highfive::highfive::highfive:[/QUOT
which version ??
Click to expand...
Click to collapse
Hackplacea said:
abkdmn said:
Problem Solved Man HI5 :V :highfive::highfive::highfive:[/QUOT
which version ??
Click to expand...
Click to collapse
i sold the ****ty phone
Click to expand...
Click to collapse
Did you fix it??

Categories

Resources