hi
Iam in 4.3 i want to flash Odin rom 4.3 To refresh my rom when i do it i see this
PHP:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then i try to do a CF Root with this file : CF-Auto-Root-d2spr-d2spr-sphl710
and i can disable the knox
i try to enter the recovery mode but it show me black screen ،، i try i lot of recovery's but problem is still
thanks and i hope found a good help
ahmedsaber20005 said:
hi
Iam in 4.3 i want to flash Odin rom 4.3 To refresh my rom when i do it i see this
then i try to do a CF Root with this file : CF-Auto-Root-d2spr-d2spr-sphl710
and i can disable the knox
i try to enter the recovery mode but it show me black screen ،، i try i lot of recovery's but problem is still
thanks and i hope found a good help
Click to expand...
Click to collapse
Nand write fail usually means Nand is corrupt flash this recovery firmware >> http://forum.xda-developers.com/showpost.php?p=30087735 << if that fails service repair new motherboard required.
Also there is no knox in 19300
tallman43 said:
Nand write fail usually means Nand is corrupt flash this recovery firmware >> http://forum.xda-developers.com/showpost.php?p=30087735 << if that fails service repair new motherboard required.
Also there is no knox in 19300
Click to expand...
Click to collapse
my phone is live but not able to take a new firmware ،، i try this I9300XXUGNA7_I9300OJVGNA1_XSG (( one file ))
and this (( GT-I9300XXUGMJ9 4.3 )) 4 files} and i see this
PHP:
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA7_I9300OJVGNA1_I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
i will try your firmware you but the link put it it supported Arabic UI ?? >>>>4.3
GT-I9300XXUGMJ9_KOR_MULTI_FACTORY
ahmedsaber20005 said:
my phone is live but not able to take a new firmware ،، i try this I9300XXUGNA7_I9300OJVGNA1_XSG (( one file ))
and this (( GT-I9300XXUGMJ9 4.3 )) 4 files} and i see this
i will try your firmware you but the link put it it supported Arabic UI ?? >>>>4.3
GT-I9300XXUGMJ9_KOR_MULTI_FACTORY
Click to expand...
Click to collapse
Sorry when you say is live do you mean you can boot up ok and that you just have problems installing a new rom? If that is the case do not use the emergency firmware it is only to be used as a last resort if you can't boot your rom...
tallman43 said:
Sorry when you say is live do you mean you can boot up ok and that you just have problems installing a new rom? If that is the case do not use the emergency firmware it is only to be used as a last resort if you can't boot your rom...
Click to expand...
Click to collapse
yes i can boot to my phone but recovery not working and i cant install any new Firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ahmedsaber20005 said:
Click to expand...
Click to collapse
What phone have you got your picture shows you have a SGH-1747 this is the 19300 forum flashing anything from here to your phone can seriously damage it.
Edit
Looks like you have been trying to flash 19300 firmware on your SGH-1747
tallman43 said:
What phone have you got your picture shows you have a SGH-1747 this is the 19300 forum flashing anything from here to your phone can seriously damage it.
Edit
Looks like you have been trying to flash 19300 firmware on your SGH-1747
Click to expand...
Click to collapse
Yes I noticed that and I was just at startup writes ،،، i want the stock image (( kernel )) can you give me a one? because now i flesh kernel for i9300 and it is not boot to system :crying:
ahmedsaber20005 said:
Yes I noticed that and I was just at startup writes ،،، i want the stock image (( kernel )) can you give me a one? because now i flesh kernel for i9300 and it is not boot to system :crying:
Click to expand...
Click to collapse
Sorry to hear that..[emoji33]
I'm not at my computer now but ask in the SGH1747 thread and see if they have some sought of rescue firmware like we do [emoji106]
tallman43 said:
Sorry to hear that..[emoji33]
I'm not at my computer now but ask in the SGH1747 thread and see if they have some sought of rescue firmware like we do [emoji106]
Click to expand...
Click to collapse
thanks ،،، i will do
I flash cm11 and all is OK
Related
flash the phone with the Samsung Galaxy Ace s5830i la fleur
Now, when the writing Logo jpg draw failed
sews all the instructions correctly.
've tried many versions of firmware.After all firmware to issue one (logo jpg draw failed)
Wipe can not do because it does not comes in the mode Recovery.
Smartphone comes only mode (this mode Odin)
driver installed on Usb.Odin Multi Loader using version Odin3 v3.07.
here's the log firmware
Spoiler
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830ZXXLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_S5830iXXLK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_S5830ZOXELH1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img
<ID:0/011> NAND Write Start!!
<ID:0/011> param.lfs
<ID:0/011> sbl.bin
<ID:0/011> system.img
<ID:0/011> userdata.img
<ID:0/011> BcmCP.img
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> csc.rfs
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Removed!!
<ID:0/011> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and after that the logo does not appear Samsung Galaxy Ace La Fleur, instead ( ' logo jpg' draw file )
how can it be cured?
Because you install S5830i version on your Ace La Fleur . La Fleur is not appear at bootlogo. Anyway , you phone is normal run. It nothing happen to your phone if you install S5830i version without La Fleur. :fingers-crossed:
HanLand_Ace"I" said:
Because you install S5830i version on your Ace La Fleur . La Fleur is not appear at bootlogo. Anyway , you phone is normal run. It nothing happen to your phone if you install S5830i version without La Fleur. :fingers-crossed:
Click to expand...
Click to collapse
and I do not, so it was La Fleur.
in any version, but gives the same => logo jpg draw failed
logo does not want what is not
Try to flash firmware with pit files...and make sure ur on stock rom...
Sent from my GT-S5830i using xda app-developers app
Angelogc said:
and I do not, so it was La Fleur.
in any version, but gives the same => logo jpg draw failed
logo does not want what is not
Click to expand...
Click to collapse
Try to flash S5830Z firmware.
http://www.hotfile.com/dl/184136306/64dc6a1/S5830ZXXLK3_S5830ZOXELH1_SER.zip.html for ex.
S5830i Stock + Root + init.d + LightSpeed Intervention + Link2SD
ChelebiTech said:
Try to flash S5830Z firmware.
http://www.hotfile.com/dl/184136306/64dc6a1/S5830ZXXLK3_S5830ZOXELH1_SER.zip.html for ex.
S5830i Stock + Root + init.d + LightSpeed Intervention + Link2SD
Click to expand...
Click to collapse
did not help: (
Boot mode Odin .This is what is written.
Odin Mode
PRODUCT NAME: GT-S5830i
CUSTOM BIN DOWN:YES(9 counts)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mafi91
with cooperve_0623.pit
does not work.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830ZXXLF3_S5830ZOXELE1_RST_S5830iXXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
written at the top SET Partition .this inscription over ID:COM
tick in Odin ,stand on Auto Reboot ,Re-Partition,F.Reset Time
sorry for such a great picture. do not know how to clean under the spoiler.
Do not use pit file and dont select repartition. Put firmware under PDA section of odin, not bootloader part.
S5830i Stock + Root + init.d + LightSpeed Intervention + Link2SD
ChelebiTech said:
Do not use pit file and dont select repartition. Put firmware under PDA section of odin, not bootloader part.
S5830i Stock + Root + init.d + LightSpeed Intervention + Link2SD
Click to expand...
Click to collapse
did as you wrote.
here's the log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830ZXXLK3_S5830ZOXELH1_RST_S5830iXXLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> BcmCP.img
<ID:0/011> boot.img
<ID:0/011> system.img
<ID:0/011> param.lfs
<ID:0/011> csc.rfs
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Removed!!
<ID:0/011> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Only when you turn on your phone, a black screen and the inscription.As on the screenshot 1
Nothing has changed.
You need to get full file of stock rom . It must be work . Let i check the La Fleur Ace stock rom
Note:- I have check La fleur version stock ROM , not available . But you must download one by one file S5830i without La Fleur version
Go to this link : Firmware Sammobile
HanLand_Ace"I" said:
You need to get full file of stock rom . It must be work . Let i check the La Fleur Ace stock rom
Note:- I have check La fleur version stock ROM , not available . But you must download one by one file S5830i without La Fleur version
Go to this link : Firmware Sammobile
Click to expand...
Click to collapse
I downloaded
Ukraine 2012 November 2.3.6 S5830ZXXLK3 S5830ZOXELH1
Ukraine 2012 November 2.3.6 S5830IXXLK3 S5830IOXELH1
established. did not help, it is still logo jpg draw failed.
I need to wipe the system. To clear section which stores Boot Skrin.
Pit the file can not do it stupidly vayp.Tak hanging and not what is not there delaet.Skrin above.
in Recovery and does not go for a black screen with a Recovery nadpisyu.Tak that do not wipe out.
Angelogc said:
I downloaded
Ukraine 2012 November 2.3.6 S5830ZXXLK3 S5830ZOXELH1
Ukraine 2012 November 2.3.6 S5830IXXLK3 S5830IOXELH1
established. did not help, it is still logo jpg draw failed.
I need to wipe the system. To clear section which stores Boot Skrin.
Pit the file can not do it stupidly vayp.Tak hanging and not what is not there delaet.Skrin above.
in Recovery and does not go for a black screen with a Recovery nadpisyu.Tak that do not wipe out.
Click to expand...
Click to collapse
Try to flash the attachment in odin, place in Boot selection.
If its not work, try to flash a custom kernel then test if recovery works, then flash stock rom...
Oh ! The custom kernel ! I'm forget ! If it don't work too, send your phone to the Samsung Center Service. Like my phone , i got bricked hard and i want to unbrick my phone , it not working .Another one member is posting the thread is "Download Mode Invisible" for our phone , he post this year .I got bricked it on year 2012 . Now my phone is working because i send it to Samsung Service.
Sorry for my bad english.
ChelebiTech said:
Try to flash the attachment in odin, place in Boot selection.
If its not work, try to flash a custom kernel then test if recovery works, then flash stock rom...
Click to expand...
Click to collapse
did not help: (
good day developers
after flashing with oding the flash broked
now phone start but with white screen like the image below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the big problem when i try to flash it again with odin this is the msg:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
xxxdstxxx said:
good day developers
after flashing with oding the flash broked
now phone start but with white screen like the image below
the big problem when i try to flash it again with odin this is the msg:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXELL4_566833_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAELL4_566833_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you flashed some wrong file? no?.. what did you flash then?
sriram231092 said:
you flashed some wrong file? no?.. what did you flash then?
Click to expand...
Click to collapse
maybe but the essentialy download mode work fine but something wrong cannot flash with doin
can you enter recovery mode?
Sent from my GT-I9300 using xda app-developers app
sriram231092 said:
can you enter recovery mode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
nope
okay. did you try all the usb ports on the computer to flash through odin?
Sent from my GT-I9300 using xda app-developers app
sriram231092 said:
okay. did you try all the usb ports on the computer to flash through odin?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yess maybe pit damaged not ?
may be try downloading pit file separately and flash it along with the firmware.
Sent from my GT-I9300 using xda app-developers app
sriram231092 said:
may be try downloading pit file separately and flash it along with the firmware.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
can u give me one ? i tried with many but no results
it is quite impossible for me at present to provide you links. sorry for that. google pit file for galaxy s3. good luck :thumbup:
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
sriram231092 said:
it is quite impossible for me at present to provide you links. sorry for that. google pit file for galaxy s3. good luck :thumbup:
SRIRAM
Sent from GT-I9300 running SOTMAX ULTIMATE V22 (XXUFME7)
Click to expand...
Click to collapse
it's ok dear thanks for corporation
Re-Paration operation faild !
thats what show me on odin any solution ???
Maybe this thread can help you, but be careful if you dont have same CARRIER then it might not work nd make ur phone even worser. But just grab a good it
http://forum.xda-developers.com/showthread.php?t=1840030
and
http://forum.xda-developers.com/showthread.php?t=1785481
Thanks for reply
this operation need Pit and my pit damaged
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
xxxdstxxx said:
Thanks for reply
this operation need Pit and my pit damaged
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
Click to expand...
Click to collapse
Service centre next step.
jje
Hello i need some help recovering a Samsung galaxy S 2 GT-i9100
it is stuck in Boot mode (showing Only the Samsung galaxy s2 logo) soft bricked?
i tryed to fiddel with http://forum.xda-developers.com/showthread.php?t=1449771
but i am unabel to boot into "Download mode " the green dude is only showing for a moment and then it return to the SG logo....
Please advise
You won't be fixing it unless you get into download mode. Keep trying.
Emort said:
Hello i need some help recovering a Samsung galaxy S 2 GT-i9100
it is stuck in Boot mode (showing Only the Samsung galaxy s2 logo) soft bricked?
i tryed to fiddel with http://forum.xda-developers.com/showthread.php?t=1449771
but i am unabel to boot into "Download mode " the green dude is only showing for a moment and then it return to the SG logo....
Please advise
Click to expand...
Click to collapse
go to recovery and do full wipe and then check.
Now in Download mode but..
In odin i keep reciving
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_NEW_BOOTLOADER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
[B]<ID:0/005> Complete(Write) operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Picture:
emort.dk/odin3.png
all usb ports tried on 2 different PC's
3 different cables tried
any ideas?
Find Hopper8's 'Odin troubleshooting' thread & try the stuff in that thread/keep trying. In many cases these things are fixed by perseverance I.E the first 7 flashes dont work but the 8th works for whatever reason. Unless you'd rather take it to a Samsung service centre & explain how you broke it (and pay to have it fixed) ?
Emort said:
In odin i keep reciving
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_NEW_BOOTLOADER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
[B]<ID:0/005> Complete(Write) operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Picture:
emort.dk/odin3.png
all usb ports tried on 2 different PC's
3 different cables tried
any ideas?
Click to expand...
Click to collapse
The same thing happened to me on My Galaxy s1.
Un-install all samsung drivers
Install Samsung KIES
and update drivers in download mode
make sure to kill all kies task from Task manager
Try different Odin version
Try to flash older Version firmware like Ginger bread
...which is exactly what Hopper's thread says (among other things) & was the whole point of him putting that info together - so these things don't have to be regurgitated time & time again for every n00b who gets stuck/asks.
MistahBungle said:
...which is exactly what Hopper's thread says (among other things) & was the whole point of him putting that info together - so these things don't have to be regurgitated time & time again for every n00b who gets stuck/asks.
Click to expand...
Click to collapse
well tried all the possible soluton no luck.
Looking for a TESTER to see if my Package works Correctly for them as WELL?!?!?!
This is the Standard Samsung 4 Service Files Format!
Please flash with the following ODIN and Image Files!
You will be flashing twice!
PLease select these Checkboxes in ODIN for FIRST Flashing!
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
Phone EFS Clear
HIT START!
WHEN PASS or on ERROR
Pull BATTERY, and USB CABLE
Reinsert BAttery
Power back INTO "ODIN Mode"
PLease select these Checkboxes in ODIN for FIRST Flashing!
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
HIT START!
ENJOY KitKat?!?!?!?!?!
Samsung Odin3 v3.10.zip
CSC-VZW_I545VRUFNK1_I545VZWFNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.zip
PLEASE POST ALL ERRORS AND REPORTS BELOW!!
So after I unziped the file, I have 4 md5 files and I suppose to flash each file with AP mode with your Odin settings? You said do it twice so I need to flash 8 times? Flash in any orders?
No..no! Each file goes in the matching buttons in ODIN!
Click the bl button...select bl file
DO this for all 4!
Then...set checkboxes, then hit start. First flash done..proceeded to second flash with different checkboxes
KaosMaster said:
Looking for a TESTER to see if my Package works Correctly for them as WELL?!?!?!
This is the Standard Samsung 4 Service Files Format!
Please flash with the following ODIN and Image Files!
You will be flashing twice!
PLease select these Checkboxes in ODIN for FIRST Flashing!
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
Phone EFS Clear
HIT START!
WHEN PASS or on ERROR
Pull BATTERY, and USB CABLE
Reinsert BAttery
Power back INTO "ODIN Mode"
PLease select these Checkboxes in ODIN for FIRST Flashing!
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
HIT START!
ENJOY KitKat?!?!?!?!?!
Samsung Odin3 v3.10.zip
CSC-VZW_I545VRUFNK1_I545VZWFNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.zip
PLEASE POST ALL ERRORS AND REPORTS BELOW!!
Click to expand...
Click to collapse
Would this even apply if one had taken the full OTA update? Thanks!
Yes...I believe it will revert. It is a complete set of files
Thanks! I will see if i can get this tried tonight and report back. If not, for sure in the morning. Thanks again!
No problem! Thanks for testing!
1st flash
KaosMaster said:
Looking for a TESTER to see if my Package works Correctly for them as WELL?!?!?!
This is the Standard Samsung 4 Service Files Format!
Please flash with the following ODIN and Image Files!
You will be flashing twice!
PLease select these Checkboxes in ODIN for FIRST Flashing!
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
Phone EFS Clear
HIT START!
WHEN PASS or on ERROR
Pull BATTERY, and USB CABLE
Reinsert BAttery
Power back INTO "ODIN Mode"
PLease select these Checkboxes in ODIN for FIRST Flashing!
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
HIT START!
ENJOY KitKat?!?!?!?!?!
Samsung Odin3 v3.10.zip
CSC-VZW_I545VRUFNK1_I545VZWFNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.zip
PLEASE POST ALL ERRORS AND REPORTS BELOW!!
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL-BOOTLOADER_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP-PDA_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP-PHONE_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC-VZW_I545VZWNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone show
Product Name: SCH 1545
Current Binary: samsung Official
System Status: Official
Activation Lock: Off:
CSB-CONFIG-LSB 0x38
check Fail-fused:7 Binary 6
---------- Post added at 08:53 AM ---------- Previous post was at 08:46 AM ----------
KaosMaster said:
Looking for a TESTER to see if my Package works Correctly for them as WELL?!?!?!
This is the Standard Samsung 4 Service Files Format!
Please flash with the following ODIN and Image Files!
You will be flashing twice!
PLease select these Checkboxes in ODIN for FIRST Flashing!
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
Phone EFS Clear
HIT START!
WHEN PASS or on ERROR
Pull BATTERY, and USB CABLE
Reinsert BAttery
Power back INTO "ODIN Mode"
PLease select these Checkboxes in ODIN for FIRST Flashing!
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
HIT START!
ENJOY KitKat?!?!?!?!?!
Samsung Odin3 v3.10.zip
CSC-VZW_I545VRUFNK1_I545VZWFNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.zip
PLEASE POST ALL ERRORS AND REPORTS BELOW!!
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL-BOOTLOADER_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP-PDA_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP-PHONE_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC-VZW_I545VZWNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says same as 1st flash
---------- Post added at 08:57 AM ---------- Previous post was at 08:53 AM ----------
Guess I should ask what's the next step to get booted up again?
Here is the lollipop Rom!
https://docs.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/edit?usp=docslist_api
Flash with these checkboxes:
Auto-reboot
Re-Partition
F. Reset Time
NAND erase all
Phone Bootloader update
Phone EFS Clear
Thanks for trying!
KaosMaster said:
Here is the lollipop Rom!
https://docs.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/edit?usp=docslist_api
Flash with these checkboxes:
Auto-reboot
Re-Partition
F. Reset Time
NAND erase all
Phone Bootloader update
Phone EFS Clear
Thanks for trying!
Click to expand...
Click to collapse
No Problem at all! Thanks for giving possible hope! If you have future things to try, I will gladly help with your testing! Now to try getting Lollipop back on.
Thanks again!
---------- Post added at 09:36 AM ---------- Previous post was at 09:08 AM ----------
KaosMaster said:
Here is the lollipop Rom!
https://docs.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/edit?usp=docslist_api
Flash with these checkboxes:
Auto-reboot
Re-Partition
F. Reset Time
NAND erase all
Phone Bootloader update
Phone EFS Clear
Thanks for trying!
Click to expand...
Click to collapse
File worked good. Back up and running!
KaosMaster said:
Looking for a TESTER to see if my Package works Correctly for them as WELL?!?!?!
This is the Standard Samsung 4 Service Files Format!
Please flash with the following ODIN and Image Files!
You will be flashing twice!
PLease select these Checkboxes in ODIN for FIRST Flashing!
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
Phone EFS Clear
HIT START!
WHEN PASS or on ERROR
Pull BATTERY, and USB CABLE
Reinsert BAttery
Power back INTO "ODIN Mode"
PLease select these Checkboxes in ODIN for FIRST Flashing!
Auto-Reboot
Re-Partition
F. Reset Time
NAND Erase All
Phone Bootloader Update
HIT START!
ENJOY KitKat?!?!?!?!?!
Samsung Odin3 v3.10.zip
CSC-VZW_I545VRUFNK1_I545VZWFNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.zip
PLEASE POST ALL ERRORS AND REPORTS BELOW!!
Click to expand...
Click to collapse
Great work Kaos! You've really stepped into the spotlight with this work and I Personally wish to commend you!
Your friend, FoxKat! [emoji6]
Has anyone gotten this to work?
Kru933 said:
Has anyone gotten this to work?
Click to expand...
Click to collapse
It works if u do not have the OC1 bootloader. If you do it will not work. So far there's no way around the lock bootloader.
That makes sense as to why it didn't work for me. I have the OC1 bootloader.
Sent from my SCH-I545 using Tapatalk
mhaas75 said:
That makes sense as to why it didn't work for me. I have the OC1 bootloader.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
But hey don't get me wrong. Right now they r trying to find ways to get around the OC1 bootloader. My has off for testing it. If they find other methods we should probably test them. I know they r working hard to get us root. We can get it accomplish to trial and error
Coming from a 'bricked' device
Someone brought me a phone the other day that they had flashed the NC5 kernel to, in an attempt to gain root access, and in the process got an error screen saying that Verizon had detected unauthorized software blah blah..... I found this nice neat little package, and it worked perfectly to fix the problem.
Not touting that this is a good fix for that particular problem, but rather giving my feedback on if this works
download: 10/10 (google speeds so much better than sammobile)
ease of use: 10/10
Compatibility with VRUFNK1 Variant: 10/10
Recommended!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP-PDA_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL-BOOTLOADER_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP-PHONE_I545VRUNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC-VZW_I545VZWNK1_CL2415818_REV06_user_low_ship_MULTI-CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> persdata.img.ext4
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
Is there any development around doing this for the OC1 bootloader for the unfortunate few of us who joined the GS4 party a little too late?
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
You just updated the ODIN? Then it's ok now? I have similar problems with yours.. unsupported dev
Biosystematics said:
You just updated the ODIN? Then it's ok now? I have similar problems with yours.. unsupported dev
Click to expand...
Click to collapse
Yes. The compression format for the firmware changed on Oreo and it needs an update Odin to run.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
Hello every one
I have Samsung galaxy C7 Pro (SM-C7010), I wished to install custom recovery TWRP and root my mobile.
After flashing custom recovery TWRP using odin 3.12.7 and samsung USB driver, my Mobile starts rebooting again and again,
I tired all suggestion given by XDA experts and you tubers, flash newer version of TWRP for samsung C7, wipe cache/delvik, factory rest, mout system etc.,
After all above mess, I decided to flash samsung offial firmware stock recovery ( using 4 file, BL, AP, CP,CSC) but during flashing I have this error "Unsupport dev_type"
This is the code, please help where the problem is?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn.lz4
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You need 3.13.1 version of odin. You're using an older version.
jd1639 said:
Anyone getting this error when trying to update to BRE2? Odin will flash ARA2 without a problem.
Never Mind. Didn't realize there's a newer version of odin, 3.13.1
Click to expand...
Click to collapse
Yeah, just update Odin. It works for me.
Thank bro.