i just flashed a custom rom to my verizon and now i have no network and wifi always fails to obtain IP. i am on a rooted NC5 build. i tried restoring the APN to default and that failed. i am a noob and have searched the forums but have had no luck. i would be incredibly thankful for any help. please? and thanx
What Rom and did u flash modules?
no network
i installed bajarom v2.2, i am on ss v3.72, and am rootred by towelroot method.
jee12891 said:
i installed bajarom v2.2, i am on ss v3.72, and am rootred by towelroot method.
Click to expand...
Click to collapse
So did you flash the module?...you need to flash to enable radios....it's talked about all over the place. I use gigilies nc2 wifi fix zip for any kitkat based SS compatible rom.
sent by safestrap powered echo v26
no network after rom install on verizon s4
no i didnt flash the wifi fix. noob mistake apparently. i have that same module installed already too but didnt think to flash before bootin now i cant get into my safestrap recovery and i have no way of downloading busybox to enable ss. any suggestions?
jee12891 said:
no i didnt flash the wifi fix. noob mistake apparently. i have that same module installed already too but didnt think to flash before bootin now i cant get into my safestrap recovery and i have no way of downloading busybox to enable ss. any suggestions?
Click to expand...
Click to collapse
Must be a way to get busy box install on to your extsd card and install it from there. You still have root?
sent by safestrap powered echo v26
no network after rom install on verizon galaxy s4
no I do not have root permission
jee12891 said:
no I do not have root permission
Click to expand...
Click to collapse
You probably need to start all over...
sent by safestrap powered echo v26
No network after rom install on Verizon galaxy s4
So what rom/roms would you recommend?
jee12891 said:
So what rom/roms would you recommend?
Click to expand...
Click to collapse
All the safestrap compatible ones are worth a look. I have personally run hyperdrive. ..baja...echo...
sent by safestrap powered echo v26
Related
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
lisi80 said:
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
Click to expand...
Click to collapse
You can't flash AOSP roms on MK2/Safestrap, only TW (TouchWiz) based roms matching your current stock version (4.3).
thanks Oishi,
Can I flash back to an older stock rom that is not safestrap?
lisi80 said:
thanks Oishi,
Can I flash back to an older stock rom that is not safestrap?
Click to expand...
Click to collapse
No, once you're on Stock MK2 you're locked to MK2 and have no other options than safestrap.
Oishikatta said:
No, once you're on Stock MK2 you're locked to MK2 and have no other options than safestrap.
Click to expand...
Click to collapse
lisi80 said:
Hello all,
I've been trying to figure out how to flash liquidsmooth on my phone for a while now. Everytime i try and install and boot into twrp recovery my phone crashes and i have to reflash the stock mk2.
Can anyone let me know what im missing here.
i have installed saferoot to root my phone but can't get a recovery installed successfully.
thanks
Click to expand...
Click to collapse
Here is a somewhat current list of compatible SS Roms
http://forum.xda-developers.com/showthread.php?t=2630040
Also check page 1 in the Android Development section; There are a few new ones that look tempting such as BajaRom for TW
Check out Eclipse 3.0 for an AOSP feel with TW compatibility.
Hey everybody, so I tried to download the hyperdrive rom and once I'm in safe strap it will not allow me to create a rom. Is it because I has twrp installed?
thanyo said:
Hey everybody, so I tried to download the hyperdrive rom and once I'm in safe strap it will not allow me to create a rom. Is it because I has twrp installed?
Click to expand...
Click to collapse
Not sure what you mean.. SafeStrap is based off TWRP if that's what you're saying. And how are you going about creating a new ROM slot so we know what steps you're taking
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
thanyo said:
Hey everybody, so I tried to download the hyperdrive rom and once I'm in safe strap it will not allow me to create a rom. Is it because I has twrp installed?
Click to expand...
Click to collapse
have you read the first page on the ss thread?
Mistertac said:
Not sure what you mean.. SafeStrap is based off TWRP if that's what you're saying. And how are you going about creating a new ROM slot so we know what steps you're taking
Sent from my SCH-I545 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I actually had TWRP AND then i installed SAFESTRAP. When I restart I see the safe strap menu and i click on recovery then it takes me to the menu and i follow the video and try to create i new rom for hyperdrive, but create rom is not available to click on.
thanyo said:
I actually had TWRP AND then i installed SAFESTRAP. When I restart I see the safe strap menu and i click on recovery then it takes me to the menu and i follow the video and try to create i new rom for hyperdrive, but create rom is not available to click on.
Click to expand...
Click to collapse
If you have MK2, I'm pretty sure you didn't have TWRP installed before Safestrap.
thanyo said:
I actually had TWRP AND then i installed SAFESTRAP. When I restart I see the safe strap menu and i click on recovery then it takes me to the menu and i follow the video and try to create i new rom for hyperdrive, but create rom is not available to click on.
Click to expand...
Click to collapse
If u had TRWP then ur on MDK and there forth doesn't need safestrap. Safestrap is for people with firmware after mdk. Ur doing it backwards. If ur on MK2 firmware u need to install Safestrap 1st then boot into Safestrap make ur Rom slot.
Sent from my Insane powered M8 using Tapatalk
holla420 said:
If u had TRWP then ur on MDK and there forth doesn't need safestrap. Safestrap is for people with firmware after mdk. Ur doing it backwards. If ur on MK2 firmware u need to install Safestrap 1st then boot into Safestrap make ur Rom slot.
Sent from my Insane powered M8 using Tapatalk
Click to expand...
Click to collapse
Im on mek, but a noob. I have safestrap 3.70, i seen I should have 3.71 and busybox. Do i unistall 3.70 and install 3.71 with busybox and flash mk2 kernal? Sorry for all the questions. If you advise i unistal could you guide me through? How do I flash mk2 kernal after download?
thanyo said:
Im on mek, but a noob. I have safestrap 3.70, i seen I should have 3.71 and busybox. Do i unistall 3.70 and install 3.71 with busybox and flash mk2 kernal? Sorry for all the questions. If you advise i unistal could you guide me through? How do I flash mk2 kernal after download?
Click to expand...
Click to collapse
So u r on mdk?
Sent from my Insane powered M8 using Tapatalk
holla420 said:
So u r on mdk?
Sent from my Insane powered M8 using Tapatalk
Click to expand...
Click to collapse
I meant mk2, just updated safestrap to 3.71 and it will not let me create a rom.
thanyo said:
I meant mk2, just updated safestrap to 3.71 and it will not let me create a rom.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2441441 read the thread the op gives complete directions to doing this
Sent from my Insane powered M8 using Tapatalk
holla420 said:
http://forum.xda-developers.com/showthread.php?t=2441441 read the thread the op gives complete directions to doing this
Sent from my Insane powered M8 using Tapatalk
Click to expand...
Click to collapse
Yeah i read the directions on how to do it, but it doesn't let me create a rom still. Im not sure what step to take next. One again S4 Mk2 Safestrap 3.71
thanyo said:
Yeah i read the directions on how to do it, but it doesn't let me create a rom still. Im not sure what step to take next. One again S4 Mk2 Safestrap 3.71
Click to expand...
Click to collapse
U can I my create a Rom slot. Not the Rom. If u backed up ur stock Rom u can just flash over stock Rom slot without having to create a new slot
Sent from my Insane powered M8 using Tapatalk
holla420 said:
U can I my create a Rom slot. Not the Rom. If u backed up ur stock Rom u can just flash over stock Rom slot without having to create a new slot
Sent from my Insane powered M8 using Tapatalk
Click to expand...
Click to collapse
?? I thought I wasn't able to flash over stock on 3.71? I just want to flash or install hyperdrive onto a rom.
U can but if u have problems ur on ur owns. I'm sure there's a few here that has done this no problems here. Anyways watch some videos on YouTube. There's tons of help on getting ur issuse revolved
Sent from my Insane powered M8 using Tapatalk
OK i found out what it was. You could only create a rom with the internal memory, so I had to free up some space in order to create a rom
Hello My nephew used this method to root his VZW GS4 . He is on stock rom ,now he is getting errors updating Super User binaries and also fails on recovery install. can some please help thank you.
https://www.youtube.com/watch?v=OiqJbpa9fEM
xan3x said:
Hello My nephew used this method to root his VZW GS4 . He is on stock rom ,now he is getting errors updating Super User binaries and also fails on recovery install. can some please help thank you.
https://www.youtube.com/watch?v=OiqJbpa9fEM
Click to expand...
Click to collapse
Go into settings, click on about phone and tell me what baseband is he on.
Sent from my SCH-I605 using XDA Free mobile app
You need to research how to root your specific build. They're not all done the same way. As far as a custom recovery, your ONLY option is Safestrap. I suggest you do a lot of reading before you run into bigger problems.
Sent from my NCC-1701 using Tapatalk.
xan3x said:
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Since he's on nk1, he can still downgrade back to nc5. Go to this thread and get the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Hightower24 said:
Since he's on nk1, he can still downgrade back to nc5. Go to this thread and get the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
OK. My baseband says NC5 now, according to plan. Is towelroot my only option? Is safestrap my only recovery option? I thought that if you try to flash a recovery to try a rom when you are rooted with towelroot that it will brick the phone.
xan3x said:
OK. My baseband says NC5 now, according to plan. Is towelroot my only option? Is safestrap my only recovery option? I thought that if you try to flash a recovery to try a rom when you are rooted with towelroot that it will brick the phone.
Click to expand...
Click to collapse
I don't know if Towelroot is your only option for root, but it's what I used and it worked fine. As far as recovery, like I said above, Safestrap is your ONLY option.
Sent from my NCC-1701 using Tapatalk.
xan3x said:
OK. My baseband says NC5 now, according to plan. Is towelroot my only option? Is safestrap my only recovery option? I thought that if you try to flash a recovery to try a rom when you are rooted with towelroot that it will brick the phone.
Click to expand...
Click to collapse
We can only use towelroot and safestrap. There are a few good roms in the development section that we can flash. Hyperdrive, echoerom, and Eclipse are solid. There are a few others as well that are closer to stock or are hybrids (aosp feel with TW base). Check out that section and flash only the ones that say are compatible with SS. I'm running echoerom v39.1. Be sure to read all the instructions since some of these roms may have other files that need to be flashed with it. Happy flashing!
Hi all, I have tried several times to install a custom recovery on my i545 but have bricked it each time. I've got so confused with boot versions, LOKI etc etc that I don't know what to do now.
I've included a screen shot of my About page. Can you please point me in the right direction as to what steps to take to install a custom recovery please?
donaldjboyer said:
Hi all, I have tried several times to install a custom recovery on my i545 but have bricked it each time. I've got so confused with boot versions, LOKI etc etc that I don't know what to do now.
I've included a screen shot of my About page. Can you please point me in the right direction as to what steps to take to install a custom recovery please?
Click to expand...
Click to collapse
From what i see, you cannot flash a custom recovery as you are not on a MDK bootloader. You are running NC5 which is to say "forget about running a custom recovery or a custom ROM outside of Safestrap."
zeb carter said:
From what i see, you cannot flash a custom recovery as you are not on a MDK bootloader. You are running NC5 which is to say "forget about running a custom recovery or a custom ROM outside of Safestrap."
Click to expand...
Click to collapse
OK,thanks, so how do I downgrade to MDK?
donaldjboyer said:
OK,thanks, so how do I downgrade to MDK?
Click to expand...
Click to collapse
You can downgrade to mk2 or new, but still bootloader is locked, use safestrap 3.72 to flash safestrap compatible rom.
donaldjboyer said:
OK,thanks, so how do I downgrade to MDK?
Click to expand...
Click to collapse
You can't downgrade to MDK.
Sent from my NCC-1701 using Tapatalk.
donaldjboyer said:
Hi all, I have tried several times to install a custom recovery on my i545 but have bricked it each time. I've got so confused with boot versions, LOKI etc etc that I don't know what to do now.
I've included a screen shot of my About page. Can you please point me in the right direction as to what steps to take to install a custom recovery please?
Click to expand...
Click to collapse
If you haven't done so anyway, you will need to root using towelroot. You'll also need to get SElinux changer from the play store and set to permissive. Then install safestrap 3.72 and flash roms from the dev section that say are compatible with SS. That is what we're limited to.
Update!
There is now a flashable option for mere mortals! If you have a deodexed TW ROM, you can install xposed installer, flash zip, and will have xposed.
Verified it in my S4 running Muniz_ri's OC1 stock, rooted, deodexed ROM. ROM must be deodexed for this to work.
It's new, so make a backup first!
See the OP here, use the V3 version of the framework flash file:
http://forum.xda-developers.com/showthread.php?t=3113463
Install Xposed installer 3.0 Alpha 2
Flash Xposed framework zip V3
Reboot, cache will rebuild
Run xposed and start adding modules.
Read up on modules, all aren't compatible.
Holy crap.
It's been sold. I have been debating heavily over the past week whether to stay on HyperdriveRLS21 KitKat or finally flash a custom Lollipop rom. Xposed is my life, and I told myself that the moment any sort of advancement of Xposed for TouchWiz_LP I would upgrade. I'll flash this Saturday to test this xposed out
(Echoe looks nice, but it seems that as of v49 the sending SMS/MMS is broken, if anyone knows of a stock-deodex I'd like a link)
Will Flashfire work for flashing this zip?
06sharpshot said:
Will Flashfire work for flashing this zip?
Click to expand...
Click to collapse
No idea...I'd ask on the thread.
There are issues w/some S4 variants and probably not working on our phone yet.
Kinks being worked out...i9505 issues are almost resolved according to the OP on the thread, and I'm hoping that will help for us as well, since we run i9505 kernels and ROMs w/some mods.
@SnyderGuy
There is a fix for SMS/MMS now. I'll update thus with the post link when I get home.
Arter97 made an update that completely fixes Xposed for our device! Install the xposed apk from rovo. Flash arter97's new V3 zip. Install the Lollipop memory leak fix module and Disable Samsung DVFS module for great performance.
Yup, just installed it today and verified it works! Updated OP.
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
I haven't tried myself but if you used Flashfire that would be my first suspect. I've seen that CWM may be needed. This is in its early days still.
Sent from my SCH-I545 using XDA Premium HD app
Just flashed this fix and I am waiting for the ROM to boot. It did as I typed this..
EchoeROM port by gigilie... Safestrap
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
As I already said, working perfectly for me. Stock, rooted, deodexed OC1 ROM from Muniz_ri in the Android dev section here.
Follow the steps in the OP in the thread I linked to. Install the Xposed installer, flash the framework file (use V3).
Reboot after flashing the framework zip will rebuild your cache and then you can use Xposed as usual.
Not all modules are lollipop compatible!
Remember, requires deodexed ROM.
SnyderGuy said:
Anyone get this to work? I flashed the V3 (I believe) and it bricked my device.
Which version should I download and is FlashFire okay to use?'
SCH-i545, 5.0.1 OC1, Rooted, Deodexed stock TW rom,
Click to expand...
Click to collapse
I'm running v3 with no problems.
I'm still mdk bootloader and twrp recovery. I'm running Echoe v49 deodexed rom.
Sent from my SCH-I545
I actually flashed Xposed on Echoe v49. Works like normal. Used the Safestrap kernal changing thing to get access in safestrap but it still worked.
66gt350 said:
I'm running v3 with no problems.
I'm still mdk bootloader and twrp recovery. I'm running Echoe v49 deodexed rom.
Sent from my SCH-I545
Click to expand...
Click to collapse
I'm mdk as well but can't get echo to boot what all did u do to get it working (wifi as well)? Sorry for asking here..... Got excited.
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
skepticmisfit said:
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
Click to expand...
Click to collapse
Alpha 4 with v3 sdk?
Install Xposed installer 3.0 Alpha 2
Flash Xposed framework zip V3
Reboot
Run xposed and start adding modules.
Read up on modules, all aren't compatible.
zekesamas said:
I'm mdk as well but can't get echo to boot what all did u do to get it working (wifi as well)? Sorry for asking here..... Got excited.
Click to expand...
Click to collapse
I don't think that I had to do anything special to get it to boot. It's been a few days since I installed it, but I might have just cleared the cache. I haven't had any issues with wifi. It worked right away.
skepticmisfit said:
this worked fine through muniz_ri's deodexed oc1, and flashed through flashfire perfectly for me.
Click to expand...
Click to collapse
I was very hesitant to flash xposed via Flashfire, but after reading this decided to try it. Worked well! Of course we have a limited selection of modules and mostly look forward to Wanam. But at least it isn't bricked and see a great future!
Also have muniz_ri's deodexed oc1, Verizon I545