[Q] Z2 died after flashing firmware in TWRP - Xperia Z2 Q&A, Help & Troubleshooting

Hi, I have a .314 firmware backup from a previous Z2 that got replaced after it experienced touchscreen issues. Now, I rooted the replacement Z2, installed TWRP dual recovery, and then restored the .314 image into the replacement phone. As soon as I rebooted, the phone died. It won't turn on. I tried pressing the red button beside the SIM card slot for 3 seconds but it did nothing. I tried pressing the volume up or down buttons while pressing the power button, nothing. I tried holding the power button for 10 seconds, but it did nothing. Is it a no-no to flash a ROM image from one Z2 to another? What can I do to revive the phone? Thanks.

http://forum.xda-developers.com/showthread.php?p=53968631
Try this
Sent from my D6503 using XDA Premium 4 mobile app

Envious_Data said:
http://forum.xda-developers.com/showthread.php?p=53968631
Try this
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, but I've held the power+volume up buttons for as long as 3 minutes and nothing happened. Any more ideas?

bobet96 said:
Thanks, but I've held the power+volume up buttons for as long as 3 minutes and nothing happened. Any more ideas?
Click to expand...
Click to collapse
Did you try with rubber bands
And check if it responds to pc (make sure your holding volume down when you do)
Sent from my D6503 using XDA Premium 4 mobile app

Envious_Data said:
Did you try with rubber bands
And check if it responds to pc (make sure your holding volume down when you do)
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It doesn't respond to the PC and Windows doesn't detect anything. I tried rubber bands and when I did, the Z2 LED just flashes red 3 times and that's it. How long does it need to be like that? Any more ideas? Thanks.

bobet96 said:
It doesn't respond to the PC and Windows doesn't detect anything. I tried rubber bands and when I did, the Z2 LED just flashes red 3 times and that's it. How long does it need to be like that? Any more ideas? Thanks.
Click to expand...
Click to collapse
It needs to be till it buzzes 3 times
Try charging
You need to get it into a state where it can enter flashmode, try some things
Sent from my D6503 using XDA Premium 4 mobile app

OK, I got the phone to vibrate 3 times by holding the power and volume up buttons, THEN inserting a charger into the USB port. But Windows and Flashtool still refuse to recognize the device. What's next before I take this to the service center?

bobet96 said:
OK, I got the phone to vibrate 3 times by holding the power and volume up buttons, THEN inserting a charger into the USB port. But Windows and Flashtool still refuse to recognize the device. What's next before I take this to the service center?
Click to expand...
Click to collapse
Reinstall your flashmode, fastboot and Z2 drivers
You can find a drivers.exe in the folder
Also leave it plugged in if it says installing device drivers in your disk tray
Sent from my D6503 using XDA Premium 4 mobile app

Still no luck.
I've reinstalled the flashmode and flashboot drivers, as well as the Z2 drivers, but when I connect the Z2 to the PC, Device Manager doesn't detect anything. Sometimes, it recognizes a "USB input device" but it disappears and there's no way to force Windows to recognize the Z2 drivers.
Here's what I get using Flashtool:
22/010/2014 13:10:51 - INFO - List of connected devices (Device Id) :
22/010/2014 13:10:51 - INFO - List of ADB devices :
22/010/2014 13:10:51 - INFO - - none
22/010/2014 13:10:51 - INFO - List of fastboot devices :
22/010/2014 13:10:51 - INFO - - none
22/011/2014 13:11:09 - INFO - Device Status: NOT FOUND
22/016/2014 13:16:55 - ERROR - This action needs a connected device in ADB mode
22/017/2014 13:17:22 - INFO - Selected D6503 / 17.1.2.A.0.314 / Generic Thailand
22/017/2014 13:17:22 - INFO - Preparing files for flashing
22/017/2014 13:17:39 - INFO - Please connect your device into flashmode.
22/020/2014 13:20:08 - INFO - Flash canceled
Since it won't detect flashmode, I'm forced to cancel it. I have almost given up.

Related

[Q] 6806_gpe Bricked by Charger Adapter!? Red LED flashing

So I got these micro-USB to magnetic charger adapters off eBay. Bad idea.
I plugged it into the phone, saw the green charging LED come on.
Put my phone down, the next thing I know, my screen is off, all LEDs are off...
Now I can't turn my phone on, can't charge it in the dock.
When I connect to wall power (via microusb/charging port, NOT magnetic) I get the LED rapidly blinking. After some time (estimate >10 min), the LED turns off.
If I connect to computer, the LED will stay on solid red for 3 seconds, turn off briefly, stay on 3 seconds, turn off briefly. Looking in device manager this seems to coincide with the devices refreshing...? Windows noticed the phone was connected but doesn't actually recognize it.
I had previously had unlocked bootloader and root. Now fastboot just says "waiting for device"
Tried holding down power and volume up.
Tried going into fastboot holding volume up when connecting to computer.
Tried holding down power button (with a paper clip) several times (for up to 60 seconds).
What's going on!? What should I do?! Help! I just got this phone a week ago
Power connected around the wrong way? That could have damaged the power circuit ...
Sent from my Xperia Z Ultra using Tapatalk
richie138 said:
So I got these micro-USB to magnetic charger adapters off eBay. Bad idea.
I plugged it into the phone, saw the green charging LED come on.
Put my phone down, the next thing I know, my screen is off, all LEDs are off...
Click to expand...
Click to collapse
Yeah exactly what Blue said. However there is a circuit in your device that stops damage happening. This circuit is replaceable.
But even if this was damaged it would still charge. It just wouldn't detect when your device was charging or not.
So what you describe would seem more severe. What voltage was the AC running?
It would be very rear to over volt a smartphone (although it can happen)
1) Try leaving it on charge (even if no LED's are on) for an hour.
2) Then hold the red power off button.
3) enter fastboot mode, plugging in the micro USB.
4a) open flash tool and flash another FTF
(you will get to a part on flashtool saying connect a device)
4b) try to enter fastboot mode on your device over and over again. (while watching the screen of your laptop to see when it gets connected)
It may just work.
I remember helping another user have the same problem when he thought it was wrecked due to power spike. He managed to get flashtool to detect it even though it showed no screen image. Then it was right as rain again.
Worth a try
The USB was plugged into computer
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hamdogg said:
4a) open flash tool and flash another FTF
(you will get to a part on flashtool saying connect a device)
Click to expand...
Click to collapse
I will try this.. What FTF should I flash?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
richie138 said:
I will try this.. What FTF should I flash?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
any one. just the one you have on file.
Is there not a specific ftf for gpe or something?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
For a GPe DONT FLASH A FTF
Just try and get into fastboot and flash either DooMLorD's GPe kernel
Sent from my Xperia Z Ultra using Tapatalk
blueether said:
For a GPe DONT FLASH A FTF
Just try and get into fastboot and flash either DooMLorD's GPe kernel
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
I thought so. I'm going to try the flash tomorrow, as some on the web have said an overnight charge brought them back. Any other suggestions are welcome in case I can't get into fastboot.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
blueether said:
For a GPe DONT FLASH A FTF
Just try and get into fastboot and flash either DooMLorD's GPe kernel
Sent from my Xperia Z Ultra using Tapatalk
Click to expand...
Click to collapse
Well it doesn't seem to be working. Here's the output from Flashtool. Any other advice? (I'm holding volume up as I attach the phone to the computer).
Code:
09/040/2014 08:40:17 - INFO - <- This level is successfully initialized
09/040/2014 08:40:17 - INFO - Flashtool Version 0.9.15.0 built on 15-03-2014 23:00:00
09/040/2014 08:40:22 - INFO - Device disconnected
09/040/2014 08:40:26 - INFO - Device connected with USB debugging off
09/040/2014 08:40:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/040/2014 08:40:32 - INFO - List of connected devices (Device Id) :
09/040/2014 08:40:32 - INFO - - USB\VID_0FCE&PID_D19A\6&55CE37D&0&6 Driver installed : true
09/040/2014 08:40:32 - INFO - List of ADB devices :
09/040/2014 08:40:32 - INFO - - none
09/040/2014 08:40:32 - INFO - List of fastboot devices :
09/040/2014 08:40:32 - INFO - - none
a different log (i see this more frequently.. leads me to believe that the computer thinks the phone is a human input device??)
Code:
09/002/2014 11:02:36 - INFO - <- This level is successfully initialized
09/002/2014 11:02:36 - INFO - Flashtool Version 0.9.15.0 built on 15-03-2014 23:00:00
09/002/2014 11:02:47 - INFO - Device connected with USB debugging off
09/002/2014 11:02:47 - INFO - For 2011 devices line, be sure you are not in MTP mode
09/007/2014 11:07:20 - INFO - List of connected devices (Device Id) :
09/007/2014 11:07:20 - INFO - - HID\VID_0FCE&PID_D19A\7&42AD10E&0&0000 Driver installed : true
09/007/2014 11:07:20 - INFO - - USB\VID_0FCE&PID_D19A\6&55CE37D&0&6 Driver installed : true
09/007/2014 11:07:20 - INFO - List of ADB devices :
09/007/2014 11:07:21 - INFO - - none
09/007/2014 11:07:21 - INFO - List of fastboot devices :
09/007/2014 11:07:21 - INFO - - none

[Q] PC doesn't detect Z2 flash mode

I "accidently" wiped my entire phone (dalvik,system,cache,data,internal) in twrp recovery because i was stuck in a bootloop and installed envi-rom 0.2B and the phone was able to boot normally and get the phone working again.
After getting my phone to turn on and working again i wasn't able to use flashtool and it looks like this:
05/041/2014 14:41:04 - INFO - Device connected with USB debugging on
05/041/2014 14:41:05 - INFO - Connected device : Sony Xperia Z2
05/041/2014 14:41:05 - INFO - Installed version of busybox : BusyBox v1.22.1-Stericson (2014-01-25 17:27:18 CET) multi-call binary.
05/041/2014 14:41:05 - INFO - Android version : 4.4.2 / kernel version : 3.4.0-perf-gef0bdc3 / Build number : 17.1.1.A.0.402
05/041/2014 14:41:05 - INFO - Checking root access
05/041/2014 14:41:05 - INFO - Root Access Allowed
05/041/2014 14:41:23 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 17.1.2.A.0.314. Customization : Generic Thailand
05/041/2014 14:41:23 - INFO - Preparing files for flashing
05/041/2014 14:41:24 - INFO - Please connect your device into flashmode.
05/041/2014 14:41:34 - INFO - Device disconnected
05/041/2014 14:41:59 - INFO - Device connected with USB debugging off
05/041/2014 14:41:59 - INFO - For 2011 devices line, be sure you are not in MTP mode
05/042/2014 14:42:11 - INFO - Flash canceled
LED blinks red,green, then turns off and flashtool doesn't detect it all.
Afterwards i need to use the power button and volume up key to turn off the phone and reboot.
I also tried via sony pc companion and the phone update itself to update and get 17.1.2.A.0.314 but that didn't work either.
Occasionally flashtool gets stuck on installftkit:
05/010/2014 14:10:37 - INFO - Checking root access
05/010/2014 14:10:43 - INFO - Root Access Allowed
05/010/2014 14:10:43 - INFO - Installing toolbox to device...
05/010/2014 14:10:43 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
05/010/2014 14:10:44 - INFO - Running installftkit as root thru sysrun
So i can't update by flashing, pc companion, or via phone. It would also work if anyone knows how i can update without flashing.
-Sorry for long post, just wanted to provide some background info.
Im having a similar issue!
Except i cant even boot up my phone, it shows sony logo, then goes to the boot animation sound but the screen is black.
I need to get my phone into flashmode for pcompanion to repair it, but when i try to, the led flashed red, green and off, very quickly.
Please can someone help? I can't use my new phone
ChrisRoxor said:
Please can someone help? I can't use my new phone
Click to expand...
Click to collapse
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
tonypro79 said:
Connect Phone & PC and press the Volume Down button (see LEDs blink, then let go)
Click to expand...
Click to collapse
According to the pc companion it should stay green and also it doesn't notice the phone connected at all :/
Yeah pressed those buttons and tried the options i found on other threads (re-installing drivers, using different pc, etc.) still nothing. I don't have the original wire that came with the phone but i doubt that has an impact.
It's the same with me
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
The problem i have is the computer doesnt notice the phone when its in flashmode. It just keeps saying 'Connect device'
JackHanAnLG said:
Make sure usb debugging mode is on for a start.
Pick the firmware you want to flash and let it prepear.
When it comes up saying please connect your phone. Make sure your phone is off. While plugging the USB into the phone hold down the vol down button. It will then connect and proceed to flash the firmware
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry i don't think you noticed it was on in my post:
"05/041/2014 14:41:04 - INFO - Device connected with USB debugging on"
But yeah, apparently usb debugging turns off or something of the sort?
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
erdemc said:
Check out this thread
http://forum.xda-developers.com/showthread.php?t=2635830
Have You installed the flashtool drivers????
Click to expand...
Click to collapse
Yeah from there and from the flashtool set already and it didn't work either time.
Has anyone found a fix to this yet?
I still can't flash my phone or update the software.
Dude if your rooting do it on the new root tool I did it and now I'm rooted
Sent from my D6503 using XDA Free mobile app
That's not the issue, I'm already on rooted unlocked bootloader. My problem is I can't update through phone, pc, or flashtool.
If it means anything the noise canceling isn't working anymore either so I think it might be that those original system files are gone. (for the noise canceling, flashing, and maybe other stock functions I haven't noticed)
Hope that helps anyone get an idea of the situation.
Any fix about this? I also have the same issue

Hardbrick only red led..

Hello guys
I need your help..
2 days ago i accidently flashed a rom for the xperia Z on my Z2 ( i didn't paid attention to the name of the zip..) and since then the phone won't boot, and i can't acces to flashmode or fastboot mode..
When i plug the phone on charge, i can get a red light but that's all..
Also if i unplug it, and press volume + and power it vibrate 3 times, and then i plug it to the computer, i get a sound as a device is connected, but can't go further, still no fastboot or flashmode..
Please help me guys, i had to buy a bb bold 9900 so i can keep contact with my friends, but it freaking sucks...
I hope there's a chance to get my z2 back alive..
Thanks guys
If you have lights, you should be able to reflash an ftf with flashtool. I (optimistically) flashed a z3 rom on this phone when it first came out to see what happens. I know you say it doesn't go into flash or fastboot modes, but have you installed the drivers and know what your doing?
Sent from my D6503 using Tapatalk
o0 Matt 0o said:
If you have lights, you should be able to reflash an ftf with flashtool. I (optimistically) flashed a z3 rom on this phone when it first came out to see what happens. I know you say it doesn't go into flash or fastboot modes, but have you installed the drivers and know what your doing?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Hello
Yes I have all needed drivers installed, and the first thing I tried when I got the red led was to flash a stock ftf... Unfortunately I can't go to flash mod
Sent from space, delivered by Android.
martinko23 said:
Hello
Yes I have all needed drivers installed, and the first thing I tried when I got the red led was to flash a stock ftf... Unfortunately I can't go to flash mod
Sent from space, delivered by Android.
Click to expand...
Click to collapse
Use another computer.
MaousBJ said:
Use another computer.
Click to expand...
Click to collapse
Okay, going to try it now !
MaousBJ said:
Use another computer.
Click to expand...
Click to collapse
Just tried that, don't work...
I make sure the phone is completly off (i press the red button until i feel the phone vibrate 3 times) then i plug the phone on my computer while pressing vol -
I get the sound that something is connected on my computer then nothing..
I'm using the latest flashtool version 0.9.19.0 build on 29-07-2015 12:00:00
here is the log :
12/043/2015 14:43:56 - INFO - Flashtool Version 0.9.19.0 built on 29-07-2015 12:00:00
12/043/2015 14:43:56 - INFO - Executing search strategies to find proxy selector
12/043/2015 14:43:56 - INFO - No proxy found for IE. Trying next one
12/043/2015 14:43:56 - INFO - Strategy firefox failed trying next one : No Firefox installation found
12/043/2015 14:43:56 - INFO - No proxy found for java. Trying next one
12/043/2015 14:43:56 - INFO - Syncing devices from github
12/043/2015 14:43:57 - INFO - Scanning devices folder for changes.
12/044/2015 14:44:13 - INFO - Pulling changes from github.
12/044/2015 14:44:14 - INFO - Devices sync finished.
12/044/2015 14:44:19 - INFO - Device disconnected
12/047/2015 14:47:33 - INFO - Selected Bundle for Sony Xperia Z2 (D6503). FW release : 17.1.2.A.0.314. Customization : Customized FR
12/047/2015 14:47:33 - INFO - Preparing files for flashing
12/048/2015 14:48:29 - INFO - Please connect your device into flashmode.
12/048/2015 14:48:46 - INFO - Device connected with USB debugging off
12/048/2015 14:48:46 - INFO - For 2011 devices line, be sure you are not in MTP mode
12/049/2015 14:49:02 - INFO - Flash canceled
Click to expand...
Click to collapse
Nothing happens after that... I hope there is something to do, because i don't have waranty on the phone, and I don't want to buy another phone, i love this Z2 so much
Can somebody help me please ?
Please ?
martinko23 said:
Please ?
Click to expand...
Click to collapse
What os do you have on your computer?
Have you got into flash mode before?
Have you used flashtool before?
Sent from my D6503 using Tapatalk
o0 Matt 0o said:
What os do you have on your computer?
Have you got into flash mode before?
Have you used flashtool before?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Win 10 (I got access to flash mode on w10 already)
I did
I also did with my xperia p, s, z ultra, z1 and this z2
Sent from space, delivered by Android.
martinko23 said:
Win 10 (I got access to flash mode on w10 already)
I did
I also did with my xperia p, s, z ultra, z1 and this z2
Sent from space, delivered by Android.
Click to expand...
Click to collapse
And your sure the drivers are installed correctly?
What does the led do when you plug the phone in?
Sent from my D6503 using Tapatalk
o0 Matt 0o said:
And your sure the drivers are installed correctly?
What does the led do when you plug the phone in?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yep 100% sure
Nothing... normally it should flash a bit then stay off, but now nothing happens, i just hear a sound that some device is connected but nothing more..
Flash mode my led usually flashes red then stays green. Does fastboot work? Does pc companion work?
Sent from my D6503 using Tapatalk
o0 Matt 0o said:
Flash mode my led usually flashes red then stays green. Does fastboot work? Does pc companion work?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Nothing works the led is red sometimes when i plug the phone to the wall charger, otherwise it won't turn on
And as I said, no flash mode, no fastboot .. it's the first time something like this happens..
Problem solved..
I sold the phone, I'm going to buy another phone instead..
So sad nobody could help me here.. Thanks anyway guys
Sent from space, delivered by Android.

Brick Help - F3216

I've successfully unlocked the bootloader, and while installing different firmware version for the root, flashmode suddenly disconnected, resulting in interrupted installation. And right now, I cannot enter neither into Fastboot or Flashmode. Plugged in device just has red light regardless of any button combination. Flashtool recognizes the device ID but I cannot proceed anywhere either. PC has all the drivers, however Flashtool does not detect fastboot/adb interface drivers. Ideas?
I had same issue with my 3111 And couldn't find any solution. I ve sent to service I hope it won't cost me too much.
I'm regret of unlock my bootloader... hope you can find a solution
linamus said:
I've successfully unlocked the bootloader, and while installing different firmware version for the root, flashmode suddenly disconnected, resulting in interrupted installation. And right now, I cannot enter neither into Fastboot or Flashmode. Plugged in device just has red light regardless of any button combination. Flashtool recognizes the device ID but I cannot proceed anywhere either. PC has all the drivers, however Flashtool does not detect fastboot/adb interface drivers. Ideas?
Click to expand...
Click to collapse
Try to hold "vol+" and "power" for 8-9sec and release, hold "vol-" and plug USB. Or try to plug USB, hold "vol-" for one minute. The led is green if OK to flash.
rrvuhpg said:
Try to hold "vol+" and "power" for 8-9sec and release, hold "vol-" and plug USB. Or try to plug USB, hold "vol-" for one minute. The led is green if OK to flash.
Click to expand...
Click to collapse
Sadly that did nothing. Is there a way to somehow return fastboot/flashmode to the phone? Or my best course of action is replacing the motherboard or something.
linamus said:
Sadly that did nothing. Is there a way to somehow return fastboot/flashmode to the phone? Or my best course of action is replacing the motherboard or something.
Click to expand...
Click to collapse
This is the way to go in flashmode...
Are you sure your battery level is good? A bootloop can drain the battery quickly (you can't see the bootloop on the screen but it is here) I bricked my phone many times with bad kernels and boot and it always revive. You are not the first who bricked his device, I will make a video to show and explain how to unbrick XA (same for Ultra) after a bad boot.img flash but not before the next week.
rrvuhpg said:
This is the way to go in flashmode...
Are you sure your battery level is good? A bootloop can drain the battery quickly (you can't see the bootloop on the screen but it is here) I bricked my phone many times with bad kernels and boot and it always revive. You are not the first who bricked his device, I will make a video to show and explain how to unbrick XA (same for Ultra) after a bad boot.img flash but not before the next week.
Click to expand...
Click to collapse
I'd gladly unbrick it myself if only I could get into fastboot/flashmode. Which is gone. Thats the problem here.
I've also considered the battery being dead from invisible bootloops (which is consistent with the phone not turning on at all), but leaving it charge for a couple of hours did not let me access fastboot/flashmode either.
linamus said:
I'd gladly unbrick it myself if only I could get into fastboot/flashmode. Which is gone. Thats the problem here.
I've also considered the battery being dead from invisible bootloops (which is consistent with the phone not turning on at all), but leaving it charge for a couple of hours did not let me access fastboot/flashmode either.
Click to expand...
Click to collapse
Happen the same to my, but I didn't unlock bootloader, just flash a Generic Firmware.
Flashtool "finish" correctly, but when I disconnect the USB and try to Power On device, Nothing happen, PC recognice USB but no driver installed, Red Led and nothing more.
Send to Service, they have to give me a new One, No fix for that :crying:
merolrockstar said:
Happen the same to my, but I didn't unlock bootloader, just flash a Generic Firmware.
Flashtool "finish" correctly, but when I disconnect the USB and try to Power On device, Nothing happen, PC recognice USB but no driver installed, Red Led and nothing more.
Send to Service, they have to give me a new One, No fix for that :crying:
Click to expand...
Click to collapse
I've sent mine to the first repair store who knew what I was talking about regarding the phone problem. The repair will cost 35eu. I have no idea what they said they're going to do, but I guess a new system will be sideloaded from inside the hardware or something.
EDIT: Aaand repair store declared it dead. Getting a new one, **** this.
I am Getting This Error
Please Help
16/057/2016 20:57:14 - INFO - Starting phone detection
16/057/2016 20:57:16 - ERROR - Drivers need to be installed for connected device.
16/057/2016 20:57:16 - ERROR - You can find them in the drivers folder of Flashtool.
16/057/2016 20:57:49 - INFO - Device disconnected
16/058/2016 20:58:10 - INFO - Device connected with USB debugging off
16/058/2016 20:58:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
16/058/2016 20:58:36 - INFO - Selected Bundle for Sony Xperia XA Ultra(F3216). FW release : 36.0.B.1.100. Customization : Commercial and Journalists
16/058/2016 20:58:36 - INFO - Preparing files for flashing
16/058/2016 20:58:40 - INFO - Device disconnected
16/000/2016 21:00:08 - INFO - Please connect your device into flashmode.
16/000/2016 21:00:54 - INFO - Device connected with USB debugging off
16/000/2016 21:00:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
It seem all of u got hard bricked ..nothing u can do but sent to service.
Beware when using flashtool, im also facing "Flashtool finish correctly, but when I disconnect the USB and try to Power On device, Nothing happen, PC recognice USB but no driver installed, Red Led and nothing more."
My xa ultra hard bricked when i try to downgrade fw..
Now im still waiting coz i sent to service (still in warranty)
f3216 bricked
I tried to install a flash on the ultra xa, bricked phone, nothing appears on the screen, turned on only appears red light, button does not work less, button more, nothing ... only red light. Turned paper weight ?? Did you get any solutions?
sony XA ultra bricked
Anyone got a solution to the paper weight?
Joao.Estevam said:
Anyone got a solution to the paper weight?
Click to expand...
Click to collapse
Send to Sony Service, Pray and wait to give a New One
Joao.Estevam said:
Anyone got a solution to the paper weight?
Click to expand...
Click to collapse
Nope cause there is only one way to ressurect it, send to Sony service center and hope they replace the motherboard.
Sent from my Xperia XA using XDA Labs
Send it to me I will fix it just for 500Rs.
wrundawan said:
Send it to me I will fix it just for 500Rs.
Click to expand...
Click to collapse
I'm still waiting for any video/guide and file for your miraculous free solution coming from nowhere
I'm not skilled enough to understand how it works?
my xperia XA F3212 dead..i am in bangalore how do i contact you please get back to me 9535800337
---------- Post added at 05:52 AM ---------- Previous post was at 05:48 AM ----------
wrundawan said:
Send it to me I will fix it just for 500Rs.
Click to expand...
Click to collapse
my xperia XA F3212 dead..i am in bangalore how do i contact you please get back to me 9535800337
linamus said:
I've successfully unlocked the bootloader, and while installing different firmware version for the root, flashmode suddenly disconnected, resulting in interrupted installation. And right now, I cannot enter neither into Fastboot or Flashmode. Plugged in device just has red light regardless of any button combination. Flashtool recognizes the device ID but I cannot proceed anywhere either. PC has all the drivers, however Flashtool does not detect fastboot/adb interface drivers. Ideas?
Click to expand...
Click to collapse
Can you fix brick your xa??
If yes, please help me.
My divice (xa ultra- F3212) after downgrade to android 6 , bricked!
All steps is OK in flashtool, but my device only red led and can't power on.
twhhhco said:
Can you fix brick your xa??
If yes, please help me.
My divice (xa ultra- F3212) after downgrade to android 6 , bricked!
All steps is OK in flashtool, but my device only red led and can't power on.
Click to expand...
Click to collapse
You tried my guide?
https://forum.xda-developers.com/xa-ultra/how-to/f32xx-how-to-unbrick-dead-xperia-xa-t3656343
Joao.Estevam said:
I tried to install a flash on the ultra xa, bricked phone, nothing appears on the screen, turned on only appears red light, button does not work less, button more, nothing ... only red light. Turned paper weight ?? Did you get any solutions?
Click to expand...
Click to collapse
write secript file with setool box ... write code tawrite:000208B350000000 in txt file and save
with setool box add txt file and Write S ecript

Help me recover my dead z2

I was on lollipop stock rom downloades from samsony and recived update from sony while upgrading it hangs up and i have to press power and volume up to rest the phone since then its not responding any more not recharging canit enter flash mode or fastboot or recognized by xperia companion srry for bad English and thanx in advance.
Press the small reset button neer sim until vibrat three times then open flashtool and select ftf and wait for window to connect your device then hold vol down and connect the usb. Flashtool v 0.9.18.6 recommended.
Sent from my D6503 using XDA-Developers Legacy app
Sometimes I manage to make it vibrate 3 times but when I try to connect it to flash tool through vol down in flash mode it won't be detected by flash tool
Does it got recognized as something like "QC_BULK" when connected to the computer when powered off?
Or have you installed necessary drivers for flash mode and fastboot mode before flashing?
Sometimes I get somc flash device otherwise unknown device
And I have flashed this Rom from the same pc 2 or 3 weeks ago
dentist4ever said:
Sometimes I get somc flash device otherwise unknown device
And I have flashed this Rom from the same pc 2 or 3 weeks ago
Click to expand...
Click to collapse
What have you done before its failure?
Sent from my sirius using XDA Labs
Open the pc companion, click "repair software". Follow the instructions from there. It'll format the phone and install the latest firmware. (Needs internet connection)
iXaidyiu said:
What have you done before its failure?
Sent from my sirius using XDA Labs
Click to expand...
Click to collapse
the phone hanged up when upgrading i left it more then half an hour with no response so i have pressed power and vol up and its gone since that
xperia companion is not detecting the phone in repair mode
dentist4ever said:
the phone hanged up when upgrading i left it more then half an hour with no response so i have pressed power and vol up and its gone since that
Click to expand...
Click to collapse
Tried pressing the little red button next to the SIM slot?
iXaidyiu said:
Tried pressing the little red button next to the SIM slot?
Click to expand...
Click to collapse
yes but it turn to nothing
dentist4ever said:
yes but it turn to nothing
Click to expand...
Click to collapse
Is your bootloader unlocked?
Sent from my sirius using XDA Labs
Don't know but I think I didn't unlock it but I have root before
dentist4ever said:
Don't know but I think I didn't unlock it but I have root before
Click to expand...
Click to collapse
Use flashtool or Xperia Companion to restore stock firmware.
Sent from my sirius using XDA Labs
iXaidyiu said:
Use flashtool or Xperia Companion to restore stock firmware.
Sent from my sirius using XDA Labs
Click to expand...
Click to collapse
Seems that you didn't read my post well
I cannot enter flash mode nor fast boot and companion didn't detect the phone
dentist4ever said:
Seems that you didn't read my post well
I cannot enter flash mode nor fast boot and companion didn't detect the phone
Click to expand...
Click to collapse
Thats shouldnt be the case. Or your phone is low battery. Tried offline-charging?
Sent from my sirius using XDA Labs
iXaidyiu said:
Tried pressing the little red button next to the SIM slot?[/QUITTers
Yes with no hope
Click to expand...
Click to collapse
you have warranty sony return ? NO !!! ok test this if you have no solution https://drive.google.com/open?id=0B9es25_rAF5bbDRrYUZsejZOdzQ install ggsetup-3.0.0.7.exe open your back glass and look pic place jumper test point and flash .SIN_FILE_SET with s1tool v2 08.07.2014 ! important disconnect your battery
xrenoix said:
you have warranty sony return ? NO !!! ok test this if you have no solution https://drive.google.com/open?id=0B9es25_rAF5bbDRrYUZsejZOdzQ install ggsetup-3.0.0.7.exe open your back glass and look pic place jumper test point and flash .SIN_FILE_SET with s1tool v2 08.07.2014 ! important disconnect your battery
Click to expand...
Click to collapse
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : 3CE8E40B
HARDWARE ID : 04000100E1807B00
HASH :573BA40C7848CC15D672D2ECB560B257CE58FC364B00874BF31973E733339F7C
HARDWARE ID 04000100E1807B00 NOT SUPPORTED
Elapsed:65 secs.
dentist4ever said:
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : 3CE8E40B
HARDWARE ID : 04000100E1807B00
HASH :573BA40C7848CC15D672D2ECB560B257CE58FC364B00874BF31973E733339F7C
HARDWARE ID 04000100E1807B00 NOT SUPPORTED
Elapsed:65 secs.
Click to expand...
Click to collapse
you have select s1 emergency mode ?

Categories

Resources