Related
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
When I turned on my i9300 galaxy III phone last week it prompt me for an upgrade. I installed it and as soon as it booted again, every single app started to issue warnings about stopping. The phone cycles through all of these pop up warnings over and over again and never reaches the home screen.
What I have tried:
Plugged it to PC open Kies - drivers were not installed correctly, Kies didnt connect.
Ran troubleshooting (unplugged phone b4) connected phone again Kies didnt connect.
Restarted the phone in d/l mode --> wipe data/factory reset, this time the drivers were installed correctly but Kies didnt connect again.
Unplugged phone open Odin and it didnt recognize the phone either.
Tried 2 different cables switched USB ports and nothing!!
PC recognizes the phone but it wont let me see content in windows explorer.
Please help me, thanx in advance. :crying:
Pacbert
seems you need to get on another Rom
why not try odin
or root and get CWM and flash a custom Rom
Blackwolf10 said:
seems you need to get on another Rom
why not try odin
or root and get CWM and flash a custom Rom
Click to expand...
Click to collapse
I cant root the phone or how do I install another ROM. Odin doesnt recognize the phone, I plug it in and nothing happens
so I have no options how to connect to the cell phone.
Pacbert said:
I cant root the phone or how do I install another ROM. Odin doesnt recognize the phone, I plug it in and nothing happens
so I have no options how to connect to the cell phone.
Click to expand...
Click to collapse
For ODIN to recognize the device you must first go into Download Mode and you need to shutdown the device first then do this hold home+vol down+then power button)
You don't need root to use ODIN though. If you want to revert to stock see the instructions here: http://forum.xda-developers.com/showthread.php?t=1646610 it's pretty straightforward anyway so i guess you won't do something unnecessary.
As you were upgrading legitimately, take it back to vendor or Samsung and get them to sort it
SignetSphere said:
For ODIN to recognize the device you must first go into Download Mode and you need to shutdown the device first then do this hold home+vol down+then power button)
You don't need root to use ODIN though. If you want to revert to stock see the instructions here: http://forum.xda-developers.com/showthread.php?t=1646610 it's pretty straightforward anyway so i guess you won't do something unnecessary.
Click to expand...
Click to collapse
Yes I did that, I said that in my first post. I put the phone into d/l mode but Odin doesnt recognize the phone, that is my major issue here.
Neither Kies nor Odin recognizes the phone. PC installs drivers correctly and knows when its plugged in but thats about it
slaphead20 said:
As you were upgrading legitimately, take it back to vendor or Samsung and get them to sort it
Click to expand...
Click to collapse
They take a long time to respond, but yea if nobody here can give me a solution thats what Im going to do.
Nobody has a clue?
Simple test.. Tried another pc?
Sent from my Nexus 7 using xda app-developers app
realwillow said:
Simple test.. Tried another pc?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Tried 3 different and nothing
Pacbert said:
Tried 3 different and nothing
Click to expand...
Click to collapse
you can try mobile odin then though it costs a few bucks but does a great job
Blackwolf10 said:
you can try mobile odin then though it costs a few bucks but does a great job
Click to expand...
Click to collapse
I don't think there's much chance of him being able to use mobile Odin if you read the OP
slaphead20 said:
I don't think there's much chance of him being able to use mobile Odin if you read the OP
Click to expand...
Click to collapse
Yea maybe phone has no chance at all and I probably need to replace it.
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
typos1 said:
Was trying to go from GB 2.3.3 to OmniROM 4.4.4 on a friend’s S2 (GT I-9100).
I rooted using Framaroot (the first version, the latest wouldnt work), got root, checked with RootChecker. Then I tried to install CWM.
Spent hours trying, I wanted to do everything "on device" rather than use Heidal or ADB (use inux on my desktop), tried MobileOdin, but there was no "recovery" option, so tried ROM Manager using a guide ( http://luvis.se/tipstricks/root-and-install-kitkat-on-samsung-galaxy-s2-i9100-without-a-computer/ ), but kept failing cos of E signature verification, even though ROM Manager said it was installed.
I d spent hours and hours on the internet looking for how to install, seems its difficult because the device was GB.
So I tried MobileOdin again and just installed the "CWM-KitKatCompatible-i9100.zip" I downloaded from the above guide using the "install update.zip" option, I cancelled it when the warning came up about firmware can brick your device, but then hit "ok" (partly in frustration and partly cos I ve never bricked a device before as I m (USUALLY) always careful).
Now it just boots the the Samsung Galaxy S2 screen, then the screen goes blank after 10 seconds or so. Stupid, stupid me.
So can anyone help me recover it using ADB, Android Studio or maybe Heimdal or direct me to a guide on how to ? Everything I read uses Odin and assumes you can get into recovery. All that time trying to avoid connecting it to a pc and now I ve deffo got to.
Click to expand...
Click to collapse
Can you get into download or recovery mode?
noppy22 said:
Can you get into download or recovery mode?
Click to expand...
Click to collapse
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
typos1 said:
Cant get into recovery but can get into download mode. Tried One-click Unbrick and it cant connect to device, which reminded me that when I connected it to my (Ubuntu) pc (before I bricked it) I got an error message saying it couldn’t mount Android device (I got rid of my S2 a couple of years ago but it always connected to my pc with no problems). Which seems to me like a real problem - how can I un-brick it if I cant connect via USB ?
Click to expand...
Click to collapse
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
noppy22 said:
First, I don't have any experience with ubuntu, so I would suggest connecting to a windows pc via usb, making sure you install the drivers for the s2, then download odin. Once you have odin setup, I would flash a stock rom .tar from sammobile.com. From there you can flash a kernel such as philz to gain root access, and then omni or other rom.
Click to expand...
Click to collapse
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
typos1 said:
Heimdal on Ubuntu (or a Mac) will do the same job as Odin on Windows (and is more reliable), but I have this USB problem I mentioned above, so I m not sure anything is going to work if theres a problem with USB on the device (USB debugging was enabled). One-Click Unbrick cannot connect to it and nor can my pc.
Click to expand...
Click to collapse
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
noppy22 said:
Probably obvious, and you've maybe tried already, but will a different usb data cord work? And I would try a different pc just to rule it out.
Here is something to read as well about recovering from soft bricks. Hope it helps -
http://forum.xda-developers.com/galaxy-s2/general/guide-fix-unflashable-soft-bricked-gsii-t1449771
Click to expand...
Click to collapse
Thanks, already read that, its not the cable as I use it on other devices without problems.
typos1 said:
Thanks, already read that, its not the cable as I use it on other devices without problems.
Click to expand...
Click to collapse
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
noppy22 said:
Mate, the only thing I can suggest is make sure you have drivers for the phone(although the message saying can't mount device indicates a problem like corrupted partitions or nand, rather than missing drivers), and try a different pc. The fact you can get into download mode at least suggests you can flash a kernel or something, but you need a connection to the pc to do that(as you already know). I hope someone else has some other ideas
Click to expand...
Click to collapse
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
typos1 said:
I wont need drivers as Linux has drivers built into it - it works out of the box, no messing around installing them like with Windows.
I just gotta spend some time getting the firmware and finding instructions on doing it with Heimdall, theres so many versions of the S2 it makes finding the right software complex.
And I ve just got to hope there isnt a problem with the usb port on the device or I m really buggered
Click to expand...
Click to collapse
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
typos1 said:
Lol, I forgot that on Samsung devices you have to press home as well as power and vol up for recovery, found this out while trying to fins out how to unbrick it !
It wouldnnt boot but it WOULD boot to recovery, CWM recovery !
So flashed a CM kernel then Omni and all is fine, OmniROM installed !
Click to expand...
Click to collapse
Haha! The simple things in life....
noppy22 said:
Haha! The simple things in life....
Click to expand...
Click to collapse
Yeah !
Ta for your input !
Try flashing official frimware with odin or flash siyah kernel with heimdal
Should fix your problem
So, i tried to root my Samsung Galaxy S3 with the cyanogenmod installer(probably idiotic), everything went well to the point when it gave me "We couldn't talk to your phone" error. after that i tried disconnecting and restarting my PC as the tool recommended. but now my Computer(and the installer) doesn't even recognize my phone correctly, it just puts my phone to the unspecified tab in Devices and Printers. And also my phone is stuck at the cyanogen installation screen? with the "blue guy" and the only thing i can access is the download mode, and not even recovery mode! I wasn't even able to install another ROM because USB Debugging is disabled in android.HELP, I really don't know what i should try next.
Finrecon said:
So, i tried to root my Samsung Galaxy S3 with the cyanogenmod installer(probably idiotic), everything went well to the point when it gave me "We couldn't talk to your phone" error. after that i tried disconnecting and restarting my PC as the tool recommended. but now my Computer(and the installer) doesn't even recognize my phone correctly, it just puts my phone to the unspecified tab in Devices and Printers. And also my phone is stuck at the cyanogen installation screen? with the "blue guy" and the only thing i can access is the download mode, and not even recovery mode! I wasn't even able to install another ROM because USB Debugging is disabled in android.HELP, I really don't know what i should try next.
Click to expand...
Click to collapse
Go to sammobile.com and download stock rom, then in download mode flash via odin
Finrecon said:
So, i tried to root my Samsung Galaxy S3 with the cyanogenmod installer(probably idiotic), everything went well to the point when it gave me "We couldn't talk to your phone" error. after that i tried disconnecting and restarting my PC as the tool recommended. but now my Computer(and the installer) doesn't even recognize my phone correctly, it just puts my phone to the unspecified tab in Devices and Printers. And also my phone is stuck at the cyanogen installation screen? with the "blue guy" and the only thing i can access is the download mode, and not even recovery mode! I wasn't even able to install another ROM because USB Debugging is disabled in android.HELP, I really don't know what i should try next.
Click to expand...
Click to collapse
Do as @noppy22 suggested above and also try not to use apps to flash/root your phone they can cause problems ( As you have found).If you are on 4.3 there are currently no apps at the moment that can root your phone.
Use Odin to flash/root your phone it is by far the better way look here for guides >> http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 <<
tallman43 said:
Do as @noppy22 suggested above and also try not to use apps to flash/root your phone they can cause problems ( As you have found).If you are on 4.3 their are currently at the moment no apps that can root your phone.Use Odin to flash/root your phone it is by far the better way look here for guides >> http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 <<
Click to expand...
Click to collapse
Okay thanks both of you, i'll try that.
noppy22 said:
Go to sammobile.com and download stock rom, then in download mode flash via odin
Click to expand...
Click to collapse
Just did it and it worked! Thank you so much!