Hello guys!
I have a CCE SK504, a brazilian smartphone, and it works nice and all.
But i was trying to change my boot screen animation, when you turn on the cellphone, and i found one wich i liked. the resolution was wrong, so i opened the .zip file and edited the text archive ( 1080 x 1920, i changed to 540x960 that is my phone resolution).
It didn't worked very well
Now, when i turn it on, my phone shows "Android", but freezes in a black screen when the animation is supposed to come, and stays forever until i remove battery.
I can access the download and the recovery mode (by pressing vol + and power)
As the problem is on bootanimation.zip, is there some way to access phone internal files and change it to an valid .zip?
The sdcard works when i connect on pc, my phone is rooted but the recovery is not custom.
Thanks, and sorry about my bad english!
Bumping. thanks!
Bump, actually something happened:
i installed an rom in recovery mode.
Now when i turn the phone on, it shows ANDROID, but stays on a black screen like before...
So i got an friend phone and called my number
My cellphone started to vibrate! also the virtual keys vibrate when i touch then, but the phone stills stay with the black screen.
There is some way to force the image?
Related
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quañity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.
I have a xperia u After replacing the housing touch doesn't seem to work.... Device turns on device leds blinks but screen is just black lighted without colors.... after booting up (after 2 vibrates thats how XU boots) when i press camera button it opens the camera (flash light turns on) when i touch where camera icon is it just captures the picture(flashes and i can hear the capture sound)
Simply the problem is touch works. its responsive but no colors it just lights up thats it. Digitizer works to (menu, home, back buttons) cuz after booting up when i touch it it vibrates.
(When i keep removing the battery and restarting a single time sony logo came and went)
Please someone help me to solve this issue.....
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.
I have a nexus 5 rooted using 'Towelroot'
I wanted to change my boot animation, and did so using an animation installer. At first, I had the Android L boot installed and it worked flawlessly! Then, I came to XDA and found the "Boot Animation Hub".
When I was linked to his dropbox, I could not see any of the files so I randomly downloaded one. I installed it with ease, and kept using my phone. When the time came to see the animation, only the "Google" logo pops up for a few seconds, then the backlight takes over. No image is shown after that; the nexus boots fully (I can tell because I receive notifications/LED is blinking/ the screen responds to my touch with vibration and tones.
The problem: As I said, the backlight is only there. I cannot see any pictures whatsoever. The phone is completely on, but is not visible. I can reboot into recovery, and see Andy the Android, but cannot install anything, for when I go to recovery mode, it says "No Command"
Does anyone have any help?
Please, anything.
Thank you
Hello guys, I have run into a serious problem here! Please help me out..
I have a GFive President G9 Android running stock Jelly Bean 4.2.1 (ROOTED). I tried to install a boot animation through ROM Toolbox app, when I rebooted it, it didnt show any boot animation and booted straight to the home screen. So I just went into the ROM ToolBox app and restored the bootanimation backup I had created earlier to get the original GFive boot animation back.
However, when I rebooted, my phone showed the GFive Logo, and after it the screen went dark( The screen is backlit but doesnt display anything). It just stops there and doesnt do anything. Ive tried removing the battery but to no avail. For some reason I CAN'T ACCESS the RECOVERY or the DOWNLOAD MODE, as holding the power button and vol up etc still ends up in the same situation - Black backlit screen after logo. The phone isnt in a reboot loop or anything, it just stops at the black screen for eternity.
THE WORST PART, this phone probably has a damaged USB port, since I was previously able to charge it via the PC, but it wasnt detected in the PC. So I CANNOT CONNECT IT TO THE PC.
So is there anyway I could get this phone back alive? Is a factory reset possible? Please help me experts!! :crying:
P.S Custom TWRP is installed, but I cant access it
So there's no expert in this whole forum who has a solution for this? Because no reply means no one has an answer..
Incase theres no way out of this, please mention that.
Hey guys hope you're fine ^^
A friend of mine is having an issue with his phone so he asked me for help, and now i'm asking you lol
well the problem is that :
1- having a weird colored screen on startup (1st attached image)
2- after few second the phone just get stuck on boot animation (2nd attached image)
3- sometimes the phone goes into and update screen and then get stuck on 5% and after a while reboots (3rd attached image)
4- the phone just wont shut down it when i hold the power button the screen goes black, then instantly i feel a vibration and the multicolored screen comes back, then the same story "boot loop"
Well now let me tell you how this problem occurred, well my friend bought this phone from someone, so he doesn't know if there was custom recovery ever installed on this phone or if it's on stuck recovery
the phone was working fine, then one day an update notification pops up, he does the update, the first time it showed him an error message, but he tried one more time and it got throw the update process, unfortunately the phone got rebooted but never made it past the boot screen
now because the phone won't shut down, i can't get into fast boot or recovery mode (i don't know how to do that unless the phone is shut down, and doing the volume/power button combination)
i'm really stuck here and don't know what to do, i'd really appreciate your help guy
PS: sorry for the English, that was the best i could do
EDIT : i managed to get into fastboot mode,yeeeey! (see the 4th attachement)
how did you get into fastboot mode
i am not able to do it