Evening all,
Has anyone seen a quick circle case that covers the top and bottom fully like a bumper case.
All I have looked at have complete cut outs for top and bottom?
Thanks
A
--LG G3--
Related
Just ordered the Krusell flip case and then got the belt clip to go with it.
If you have any questions about these items then feel free to ask away and I'll tell you as much as I can as soon as it arrives.
Case (Tried to add link but not allowed to yet so copy and past the below into ebay and you'll find them)
KRUSELL MULTIDAPT LEATHER SWIVELKIT SWIVEL KIT 45 45MM BELT CLIP FOR CASE ORBIT
Clip
KRUSELL MULTIDAPT LEATHER SWIVELKIT SWIVEL KIT 45 45MM BELT CLIP FOR CASE ORBIT
Recieved my Krusell case the other day and its excellent in almost every way. The build quality is fantastic an even has that luxurious leather smell to it. Very strong and sturdy/well made case.
Flip cover folds downwards and can be slid off as well. I thought I wouldn't use the detachment feature but I use it all the time if I'm handling the phone a lot. You could even use the case completely without the flip cover and it would give you better protection than an Imak case (which I had first off).
It also has the option of a belt clip - which can be removed and Krusell has a lot of useful and different styled attachments. It comes with a alegator type belt clip that connects to the phone by a round plastic button attached to the case and this clip is a non swivel model - great for normal sized belts (thin/narrow).
I wear a combat style belt for work so I ordered the 45mm belt clip which slides onto the belt and can not come off without taking the belt off. The clip is a swivel clip and it clips in and holds super well.
Protects the phone very very well - there are holes etc but its made in such a way that its very hard for surfaces to come in contact with the phone at all. If you dropped the phone in this case it would be very well protected.
The cover looks as though it would probably outlive the phone.
The inside of the case is a soft suede leather which means that any dust or dirt getting in between the phone and the case is not going to act like sandpaper as in the hard cases - ie no scratching.
The only thing I noticed after a couple of days use is the the case loosened up slightly and the phone would move approx 1-2 mm out towards the top of the case making grabbing/sliding down the blind hard to access. I solved this by some double sided tape inside the case. I peeled off one side of the tape and stuck it to the inside of the case then slid the phone in and then gently pulled the case away from the phone and pulled the other side of the tape off with some tweezers and then pushed the case together - now the phone doesnt slide anywhere and is securely stuck inside the case and all the button/mic/camera holes line up perfectly.
Highly recommended and worth considering even if your thinking about an Imak style case because you can remove the clip button and the flip face and you have a similar but better case all round - the only drawback is possibly the price but compared to the price and capabilities of this phone I didnt think it too bad, especially if you work in moderate to extreme conditions.
What do you mean the flip part can be left off? Pics?
It slides off from where it attaches on the back of the case. I'll get some pic's at some point.
Photo's
SCHUMI_4EVER said:
What do you mean the flip part can be left off? Pics?
Click to expand...
Click to collapse
View pic's.....
more pic's
Oh wow cool. I didn't know it could do that. Looks like it leaves the top right corner exposed though.
SCHUMI_4EVER said:
Oh wow cool. I didn't know it could do that. Looks like it leaves the top right corner exposed though.
Click to expand...
Click to collapse
I spose it does leave it a little "exposed" but this is so you can use the front facing camera and light sensors etc and even so its only a couple of mm and the leather on top of it is quite thick so to get something to touch that part of the phone I either have to aim the object at it or hold the phone at a 45degree angle to rub the plastic on the table. But then again with the flap on its covered by the clip strap.
http://www.ebay.com.au/itm/KRUSELL-..._MobilePhonesCasesPouches&hash=item2a102e5e80 <- this is the case yeah?
electricbluejase said:
http://www.ebay.com.au/itm/KRUSELL-..._MobilePhonesCasesPouches&hash=item2a102e5e80 <- this is the case yeah?
Click to expand...
Click to collapse
Yip thats the one.
http://youtu.be/tItguxqcKOM
The first hard plastic type case that I've found to cover the top and bottom of the phone.
Most of the hard cases leave the top and bottom exposed but this one covers all 4 sides.
Thank you for the review! I still don't know what i want yet for my note 3... as far as i know i liked it naked. But i do drop stuff a lot when i sit down.. phone usually slide out of my pocket when i sit.
I did see that case online but dismissed it due to the hole at the top right hand corner. In my experience, corners are the first to go when you drop your phone!
The top and bottom protection is nice though..
[EDIT] Would definitely have ordered it if the the break at the top right hand corner was a slit like the top left hand corner, though!
gongmonk said:
Thank you for the review! I still don't know what i want yet for my note 3... as far as i know i liked it naked. But i do drop stuff a lot when i sit down.. phone usually slide out of my pocket when i sit.
Click to expand...
Click to collapse
I actually used the phone naked for 2 weeks before I got this case and I miss the hand feel of the phone. The ridged sides and textured back actually feel very nice when it is being held. The Ringke is slim, but I wish it was even thinner. If the battery cover was elevated just slightly enough to lift the camera, I would probably go naked.
Got this case also and it is pretty slim and I do like the fact that it covers the top and bottom unlike other slim hard cases. There is no lip and the silver band around the screen is exposed so if it falls face first you're going to have some nice scratches.
Overall its a good slim case.
I was contemplating getting a slick wrap. Can anyone tell me how the grip and feel is of the leather or plain colored one? Is the plain colored one like a soft touch type finish?
ILowry282 said:
I was contemplating getting a slick wrap. Can anyone tell me how the grip and feel is of the leather or plain colored one? Is the plain colored one like a soft touch type finish?
Click to expand...
Click to collapse
I'm curious if anyone who uses these wraps finds the edges of the phone get scratched. I know there are gaps between the wrap pieces don't fully cover the corners and edges.
There's a whole OP on this I'll post the link. Please search before you post.
Here's the link:
http://forum.xda-developers.com/showthread.php?t=2817593
If you read through it you will find your answer.
Hello everyone!
I am looking for something special, it's bugging me that no flip case I've found got a cutout for the LED light in the top left corner of the phone.
I've tried to make one on my own by drilling a hole in the case I've got and put a little plastic tube in there to get the light through it. It was good but then again, it's not factory made and it doesn't look that good as I wished for. Then I just cutout a piece of the top left corner of the flip case and again, it looks aweful but it does the job.
So my question is, are there any flip cases out there that got a little hole for the LED light? It would be great if it were an S-View cover as well but it's okay if it doesn't have S-View.
Additional question: Does anyone of you got the Spigen S-View flip case? If so, is the front made out of metal or plastic? I'm thinking about buying one and then drilling a better hole since metal is easier to handle than plastic.
Thanks in advance, BunnyPig!
BunnyPig said:
Hello everyone!
I am looking for something special, it's bugging me that no flip case I've found got a cutout for the LED light in the top left corner of the phone.
I've tried to make one on my own by drilling a hole in the case I've got and put a little plastic tube in there to get the light through it. It was good but then again, it's not factory made and it doesn't look that good as I wished for. Then I just cutout a piece of the top left corner of the flip case and again, it looks aweful but it does the job.
So my question is, are there any flip cases out there that got a little hole for the LED light? It would be great if it were an S-View cover as well but it's okay if it doesn't have S-View.
Additional question: Does anyone of you got the Spigen S-View flip case? If so, is the front made out of metal or plastic? I'm thinking about buying one and then drilling a better hole since metal is easier to handle than plastic.
Thanks in advance, BunnyPig!
Click to expand...
Click to collapse
I ditched my flip case for a wallet/card holder/media stand by Cellairis.
Hi all. I've been looking for the perfect clear case that's slim and has an opening for the magnetic port. The only ones I've found so far had the top and bottom front edges exposed, which has already resulted in scuffing the edges. Does anyone have any recommendations? Thanks.