YOU HOLD MYSELF AND XDA FREE FROM ANY LIABILITY. FLASH AT YOUR OWN RISK
Pulled a newer version of the radio for the VZW Variant of the Moto X. Version 232.55.52.00r. Will work on VZW phones and on TMobile. Sprint and ATT are unconfirmed. This is newer than the version included with the 4.4.4 OTA which was actually used in the unreleased 4.4.3 OTA. Don't know why they didn't update it when they released 4.4.4
You must have adb setup in order to flash these files.
1) Download the Files here Radio_MSM8960PRO_BP_232.55.52.00r.zip
2) Reboot into bootloader. Place the extracted files you downloaded into your ADB folder.
3) Open a command prompt directed to your adb folder and type these commands
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
4) Verify all commands were successful
5) Verify correct baseband version in about phone
6) Profit. Thank baby jesus.
Thank you. Going to try this
Where did you get the radio.
---------- Post added at 08:46 PM ---------- Previous post was at 08:37 PM ----------
Fastbooted in. See how it works.
Were you able to get the Verizon Moto X system per chance? I'd like to give it whirl.
Sent from my Nexus 7 using Tapatalk
rebretz000 said:
Were you able to get the Verizon Moto X system per chance? I'd like to give it whirl.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
He probably got it from the Droid series OTA... cuz basically both the phones are same hardware wise...
Gundabolu SC said:
He probably got it from the Droid series OTA... cuz basically both the phones are same hardware wise...
Click to expand...
Click to collapse
Oh... nice call. Let me check as I have my wife's Droid Ultra sitting here.
Edit: Bingo. You are correct sir.
rebretz000 said:
Oh... nice call. Let me check as I have my wife's Droid Ultra sitting here.
Edit: Bingo. You are correct sir.
Click to expand...
Click to collapse
You are welcome!
I own a droid Maxx and I interchangeably flash Moto X and Droid Maxx stuff on it...
Wondering if using this will cause the 4.4.4 OTA to be confused when the Moto X update gets released soon?
hijax2001 said:
Wondering if using this will cause the 4.4.4 OTA to be confused when the Moto X update gets released soon?
Click to expand...
Click to collapse
I'll just fastboot the other back in. I usually revert my phone back to complete stock any how prior to updating to the next OTA.
Gundabolu SC said:
He probably got it from the Droid series OTA... cuz basically both the phones are same hardware wise...
Click to expand...
Click to collapse
rebretz000 said:
Oh... nice call. Let me check as I have my wife's Droid Ultra sitting here.
Edit: Bingo. You are correct sir.
Click to expand...
Click to collapse
Gundabolu SC said:
You are welcome!
I own a droid Maxx and I interchangeably flash Moto X and Droid Maxx stuff on it...
Click to expand...
Click to collapse
Great work you've done too. I've modified some of you zips IIRC to be flashed in my Moto X ports for the Droid Maxx/Ultra
hijax2001 said:
Wondering if using this will cause the 4.4.4 OTA to be confused when the Moto X update gets released soon?
Click to expand...
Click to collapse
It may fail system verification. In that case revert back to the stock radio for your version and you'll be fine.
rebretz000 said:
I'll just fastboot the other back in. I usually revert my phone back to complete stock any how prior to updating to the next OTA.
Click to expand...
Click to collapse
Couldn't be more correct. By the way how is it working for you? I've been noticing a slight speed increase.
Its running great. I thought the signal may have been stronger.
Sent from my Nexus 7 using Tapatalk
rebretz000 said:
Its running great. I thought the signal may have been stronger.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Great!
http://forum.xda-developers.com/showthread.php?t=2724201 can this be done for our device?
Mykalmunlight said:
http://forum.xda-developers.com/showthread.php?t=2724201 can this be done for our device?
Click to expand...
Click to collapse
I believe that is an M8 forum? Completely different device. It wouldnt even flash
I meant that a similar zip packet be made for flashing the radio. I know the M8 pack wouldn't work for the X.
Does the BL need to be unlocked to flash radios?
metaljr81 said:
Does the BL need to be unlocked to flash radios?
Click to expand...
Click to collapse
No
Well the Moto X 4.4.4 is out and the baseband is listed with a different number.
rebretz000 said:
Well the Moto X 4.4.4 is out and the baseband is listed with a different number.
Click to expand...
Click to collapse
Which is really odd. That's an older radio. Specifically it began rolling out with TMobil 4.4.3 moto X roms. I posted it here for the maxx
http://forum.xda-developers.com/showthread.php?t=2780505
The one posted in this thread is a newer version. Me and @SamuriHL were just discussing this.
I just sent you a message that could REALLY make this fun. LOL
Topsnake said:
Which is really odd. That's an older radio. Specifically it began rolling out with TMobil 4.4.3 moto X roms. I posted it here for the maxx
http://forum.xda-developers.com/showthread.php?t=2780505
The one posted in this thread is a newer version. Me and @SamuriHL were just discussing this.
Click to expand...
Click to collapse
I was going to fastboot the radio/baseband you provided. It seemed to work better.
Related
I have made full system dump of KitKat for Verizon Moto X (build version Blur_Version.140.45.5.ghost_verizon.Verizon.en.US).
There is boot.img inside archive also. Boot.img is signed by Motorola. So it can be flashed on phones with locked bootloader.
Anyone who wish to make VZW KK flashabe zip can use this system dump and boot image.
140.45.5.ghost_verizon.Verizon.en.US.zip 617.8 MB
here we go a i put together a quick zip of this system dump.
rom: https://drive.google.com/file/d/0B9qC3vvamytkd3FTUGE5UlpjUEE/edit?usp=sharing
tmo 4.4 modem: https://drive.google.com/file/d/0B9qC3vvamytkOGZtLU5Ddm9WZnM/edit?usp=sharing
(this modem need to be fastbooted on to the phone, and is for unlocked bootloader only.)
edit:will try to get Verizon modem later
skiwong20 said:
here we go a i put together a quick zip of this system dump.
rom: https://drive.google.com/file/d/0B9qC3vvamytkd3FTUGE5UlpjUEE/edit?usp=sharing
Click to expand...
Click to collapse
That .zip worked great for me. Thx!
skiwong20 said:
here we go a i put together a quick zip of this system dump.
rom: https://drive.google.com/file/d/0B9qC3vvamytkd3FTUGE5UlpjUEE/edit?usp=sharing
Click to expand...
Click to collapse
IF I wont uinstall any aplications my phone reebot automatic
Works perfectly! 4.4 on my Verizon Moto X Dev!
skiwong20 said:
here we go a i put together a quick zip of this system dump.
rom: https://drive.google.com/file/d/0B9qC3vvamytkd3FTUGE5UlpjUEE/edit?usp=sharing
Click to expand...
Click to collapse
Just getting my Dev Edition from a Swappa purchase sometime today; been reading on what/how since they pulled the trigger on Kit Kat as soon as I bought it.
It should already be unlocked/rooted/twrp installed.
So, is the ZIP here one that I could simply flash through TWRP or would I need to handle differently? And, if so, would there be any repercussions? (lose root I'm sure; what about TWRP recovery - I'm sure it's older than more recent 4.4 version that's out)
Thanks!
gregwaw1981 said:
IF I wont uinstall any aplications my phone reebot automatic
Click to expand...
Click to collapse
okay the only way to fix this is to flash the 4.4 radio..i would take the one from tmo for now..i...i will upload it a little later..the radio has some tyed in secruity. ( if someone can dd the verizon radio that would b awesome.)
Sent from my XT1060 using xda app-developers app
---------- Post added at 06:31 AM ---------- Previous post was at 06:29 AM ----------
Dburgessme2 said:
Just getting my Dev Edition from a Swappa purchase sometime today; been reading on what/how since they pulled the trigger on Kit Kat as soon as I bought it.
It should already be unlocked/rooted/twrp installed.
So, is the ZIP here one that I could simply flash through TWRP or would I need to handle differently? And, if so, would there be any repercussions? (lose root I'm sure; what about TWRP recovery - I'm sure it's older than more recent 4.4 version that's out)
Thanks!
Click to expand...
Click to collapse
when u get it..download hashcodes new twrp 2631...its made to work with 4.4. then like post above we have to fast boot the modem and then reboot to twrp and flash rom. twrp should ask u to root it
Sent from my XT1060 using xda app-developers app
Al936 said:
I have made full system dump of KitKat for Verizon Moto X (build version Blur_Version.140.45.5.ghost_verizon.Verizon.en.US).
There is boot.img inside archive also. Boot.img is signed by Motorola. So it can be flashed on phones with locked bootloader.
Anyone who wish to make VZW KK flashabe zip can use this system dump and boot image.
140.45.5.ghost_verizon.Verizon.en.US.zip 617.8 MB
Click to expand...
Click to collapse
skiwong20 said:
here we go a i put together a quick zip of this system dump.
rom: https://drive.google.com/file/d/0B9qC3vvamytkd3FTUGE5UlpjUEE/edit?usp=sharing
tmo 4.4 modem: https://drive.google.com/file/d/0B9qC3vvamytkOGZtLU5Ddm9WZnM/edit?usp=sharing
(this modem need to be fastbooted on to the phone, and is for unlocked bootloader only.)
edit:will try to get Verizon modem later
Click to expand...
Click to collapse
Thank you to the both of you! Flash was successful (I flashed the T-Mo modem first, then the ROM) on the America Movil XT1058 for Puerto Rico (which is essentially the AT&T version, only there wasn't a bootloader lock )
It was a bit of a pain just removing all the bloatware that came along with the Verizon version (had to combine recovery /system remount and TiBu to get everything removed), but I'm not complaining!
Al936 said:
I have made full system dump of KitKat for Verizon Moto X (build version Blur_Version.140.45.5.ghost_verizon.Verizon.en.US).
There is boot.img inside archive also. Boot.img is signed by Motorola. So it can be flashed on phones with locked bootloader.
Anyone who wish to make VZW KK flashabe zip can use this system dump and boot image.
140.45.5.ghost_verizon.Verizon.en.US.zip 617.8 MB
Click to expand...
Click to collapse
I looked for the camera.apk or gallery.all here to no avail. Is it there? If not, can you pull it and upload it for me, thanks!
aeppacher said:
I looked for the camera.apk or gallery.all here to no avail. Is it there? If not, can you pull it and upload it for me, thanks!
Click to expand...
Click to collapse
its under the priv-app folder...motcamera and motgallery
Sent from my XT1060 using xda app-developers app
skiwong20 said:
its under the priv-app folder...motcamera and motgallery
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Yeah found it eventually, unfortunately it FCs when taking a photo on my Nex5, was hoping to get a fix for laggy focus
skiwong20 said:
okay the only way to fix this is to flash the 4.4 radio..i would take the one from tmo for now..i...i will upload it a little later..the radio has some tyed in secruity. ( if someone can dd the verizon radio that would b awesome.)
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Was anyone able to make a zip of the Verizon radio?
downloading and upgrading right now to 24 fron 12b
https://www.lg.com/global/support/opensource/opensourceList?types=ALL&search=vs980
Sent from my VS980 4G using Tapatalk
http://i.imgur.com/7drHiqr.gif
proof of upgrade to Verizon OTA 24 a
Finally it is here.
I was able to update my phone as well... Awesome find... TYVM
direct link to kdz:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW678695432109876543213/VS98024A_11.kdz
Software Upgrade Assistant fails
SUA acts like it knows my phone is connected, even says searching for updates, but never lists my G2 in the window of devices. Drivers are current and using LG cable to a main USB port.
Does LG post changelogs or would this come from Verizon?
I would think VZW since they are the one changing LG's software.
somenothingness said:
I would think VZW since they are the one changing LG's software.
Click to expand...
Click to collapse
so i downloaded the file, how do i upgrade? Cant i do it when i start the phone up through a screen?
please help lol
Also having difficulty getting device to show up in SUA's window. OP apparently able to make it happen. Tried on Vista and 8.1 machines, LG cable, USB debugging, no bueno so far.
Treesh12 said:
so i downloaded the file, how do i upgrade? Cant i do it when i start the phone up through a screen?
please help lol
Click to expand...
Click to collapse
Most idiot-proof way to upgrade atm is using the Verizon upgrade utility that is included with the phone. Just hook it up to your pc, follow the autorun prompt, and then proceed to download it and it should install the update automatically.
Dumb question probably... Do I need to do something first if coming from malladus rom like revert to stock?
Thanks
Sent from my VS980 4G
youneek said:
Dumb question probably... Do I need to do something first if coming from malladus rom like revert to stock?
Thanks
Sent from my VS980 4G
Click to expand...
Click to collapse
I believe so. You may have to kill root as well if you're using the upgrade assistant method.
somenothingness said:
SUA acts like it knows my phone is connected, even says searching for updates, but never lists my G2 in the window of devices. Drivers are current and using LG cable to a main USB port.
Click to expand...
Click to collapse
Same here, can anyone help?
Can you update with root or should we reset to factory settings?
mediumraresteak said:
Can you update with root or should we reset to factory settings?
Click to expand...
Click to collapse
You can update with root, but you will lose root.
JDHokie said:
You can update with root, but you will lose root.
Click to expand...
Click to collapse
What did you do to upgrade with the VUA?
tstcman said:
downloading and upgrading right now to 24 fron 12b
Click to expand...
Click to collapse
I love it, installed this morning.
JackpotClavin said:
direct link to kdz:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW678695432109876543213/VS98024A_11.kdz
Click to expand...
Click to collapse
Hey JPC, are you gonna upgrade the cm11 tonight with the OTA out now?
Hi.
I want to upgrade to the Lollipop builds from my m8. I am currently running the GPe 4.4.2 rom, and was wondering which firmware I should flash. Im looking at the sense 4.4.4 firmware and I was just wondering if I can flash any sense 4.4.4 firmware or will I have to get a specific one for the AT&T m8. Thanks in advance!
If your running GPE than your unlocked,CWM/TWRP,rooted so that's good.how about S-OFF?
As far as upgrades it all depends on how fast you want it.
at&t being on the low end of the list for receiving OTA's
Fully converting to GPE would ensure a faster update but will lack the Sense version lollipop look and feel.
Read around and become more familiar with what options you have
I already am s-off and know what the Gpe conversion does and how I will loose sense. But I was wondering on my main thread which file of the sense 4.4.4 firmware I should flash.
But thanks anyways
Masterguy635 said:
I already am s-off and know what the Gpe conversion does and how I will loose sense. But I was wondering on my main thread which file of the sense 4.4.4 firmware I should flash.
But thanks anyways
Click to expand...
Click to collapse
3.28.401.6 or .7 will work fine
No such thing as lost sense for good.you can go back from converted
Yeah I'm still trying to figure out how to back pedal to sense partition. There are a few different threads telling different things to do. From what I can understand to back pedal from gpe to sense. You just download 1.54, factory reset,flash custom recovery,flash ROM..
Is this firmware for the US Dev HTC One m8 or is it the international unlocked? Since the ATT M8 and the US Dev M8 have identical hardware, I just want to make sure I use the proper firmware.
jxcorex28 said:
Yeah I'm still trying to figure out how to back pedal to sense partition. There are a few different threads telling different things to do. From what I can understand to back pedal from gpe to sense. You just download 1.54, factory reset,flash custom recovery,flash ROM..
Click to expand...
Click to collapse
That's what it says but you need a computer
Correct..imo do not use euro firmware on an att device. Use the firmware made for the device your on. Here soon i dont think youll be able to interchange firmwares shortly with euro devices without causing major issues.
Masterguy635 said:
Is this firmware for the US Dev HTC One m8 or is it the international unlocked? Since the ATT M8 and the US Dev M8 have identical hardware, I just want to make sure I use the proper firmware.
Click to expand...
Click to collapse
So do you think the firmware version above will work with the AT&T M8 or should I be looking for another firmware?
There are 3.28.1540.5 firmware packages available for flashing. I would suggest using it or change cid and flash ruu3.28.1540.5 which will update you to latest firmware.Paramus Nj?
Masterguy635 said:
So do you think the firmware version above will work with the AT&T M8 or should I be looking for another firmware?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
There are 3.28.1540.5 firmware packages available for flashing. I would suggest using it or change cid and flash ruu3.28.1540.5 which will update you to latest firmware.Paramus Nj?
Click to expand...
Click to collapse
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
You may have accidentally renamed the file firmware.zip.zip by having the file extensions hidden in Windows (it certainly looks that way from the screenshot of your file folder).
Did you change your cid? Looked at pics command should only be fastboot flash zip firmware.zip not all the other strings in the command.
Looks like its in a folder named adb so you should cd into that folder once there the command above should be entered.
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
Yes like @redpoint73 said .
Rename it to just "firmware" and use the full command again (don't change the command)
Thanks everyone for the help!
I succesfully flashed the firmware and flashed the SD Lollipop rom. Everything is working fine and I have encountered no issues.
Once again thanks for your help!
Masterguy635 said:
Thanks everyone for the help!
I succesfully flashed the firmware and flashed the SD Lollipop rom. Everything is working fine and I have encountered no issues.
Once again thanks for your help!
Click to expand...
Click to collapse
So was the issue solved by just renaming the file, or something else?
redpoint73 said:
So was the issue solved by just renaming the file, or something else?
Click to expand...
Click to collapse
Yeah.
Masterguy635 said:
Yeah.
Click to expand...
Click to collapse
Thanks. Its good to know what the solution was, so that we can use that knowledge to help others in the future. And to confirm that we have given you the correct advice.
redpoint73 said:
Thanks. Its good to know what the solution was, so that we can use that knowledge to help others in the future. And to confirm that we have given you the correct advice.
Click to expand...
Click to collapse
No Problem!
And I appreciate what you do for this fourm, so thanks again
Can anyone help in build 5.0 for xolo a500s
Sent from my A500s using XDA Free mobile app
As I an no longer maintaining this thread, it is now deprecated.
Fortunately for Potter users, NZedPred has taken over.
The new thread can be found here:
https://forum.xda-developers.com/g5-plus/development/twrp-flashable-stock-builds-t3813351
Cheers
This is amazing, I was looking for flashable stocks ROMs because for now I don't have access to my PC. I will download and try the LA version.
this is awesome
Q9Nap said:
The only modifications from stock are that dm-verity and force encryption have been disabled in the boot images, and unlocked device/dm-verity warnings have been disabled in the logo images.
Click to expand...
Click to collapse
Thank you! Good job!
However, please advise this in red.
And perhaps you want also to add a link to an untouched stock. It's great to have the originals of boot.img and logo.img.
:good:
After Flashing Rom It Will Relock Bootloader ?
Using the the xt1687 is there a particular one I should use? I'm not up to date on all the stock firmware lol. I appreciate you posting these up
---------- Post added at 02:32 PM ---------- Previous post was at 02:28 PM ----------
_Official_KB_ said:
After Flashing Rom It Will Relock Bootloader ?
Click to expand...
Click to collapse
No
I have downloaded the eu full version twice now and both times when trying to open the zip I get invalid argument error?
Thank you so much you absolute legend these are super convenient!!
Great!!!
What is the LA one?
joshk89 said:
Using the the xt1687 is there a particular one I should use? I'm not up to date on all the stock firmware lol. I appreciate you posting these up
Click to expand...
Click to collapse
What is your current build?
NPN25.137-43-5 is an update from NPN25.137-35, and is for Verizon.
NPN25.137-67 is an update from NPN25.137-15, and is for Latin America.
NPNS25.137-33-11 is an update from NPNS25.137-33-5, and is for Europe.
skooter32 said:
I have downloaded the eu full version twice now and both times when trying to open the zip I get invalid argument error?
Click to expand...
Click to collapse
I just downloaded the EU build and it worked with no issues.
I've added sha-1 values for the full builds to enable file verification.
carnivalrejectq said:
What is the LA one?
Click to expand...
Click to collapse
LA = Latin America
What build do you install for the us variant? I'm super confused
Q9Nap said:
What is your current build?
NPN25.137-43-5 is an update from NPN25.137-35, and is for Verizon.
NPN25.137-67 is an update from NPN25.137-15, and is for Latin America.
NPNS25.137-33-11 is an update from NPNS25.137-33-5, and is for Europe.
Click to expand...
Click to collapse
I'm really not sure but 137-35 looks familiar. I'm not on stock right now but i use the stock DEODEXED rom when I feel like stock. Is the 43-5 update the most recent one to that? I use sprint but I feel like that doesn't matter since it's carrier unlocked
Can u just use the Verizon build for the rest of the US? (METRO)
zeft64 said:
What build do you install for the us variant? I'm super confused
Click to expand...
Click to collapse
The only U.S. OTA currently is the VZW one.
Any of the builds will likely work fine.
joshk89 said:
I'm really not sure but 137-35 looks familiar. I'm not on stock right now but i use the stock DEODEXED rom when I feel like stock. Is the 43-5 update the most recent one to that? I use sprint but I feel like that doesn't matter since it's carrier unlocked
Click to expand...
Click to collapse
Without specific information, I can't really help you.
As you say though, the device is carrier unlocked, so any build will likely work fine.
carnivalrejectq said:
Can u just use the Verizon build for the rest of the US? (METRO)
Click to expand...
Click to collapse
Probably; feel free to try it and report back.
Q9Nap said:
The only U.S. OTA currently is the VZW one.
Any of the builds will likely work fine.
Without specific information, I can't really help you.
As you say though, the device is carrier unlocked, so any build will likely work fine.
Probably; feel free to try it and report back.
Click to expand...
Click to collapse
I'll try it out tonight. Thanks for the feedback
I flashed the Verizon one. The reason I asked my previous question is because Volte/WiFi Calling is important to me because I get LTE signal just fine in my area but no 3G/HSPA so I rely on those two for phone calls at home. Volte and WiFi calling are working good. Thanks for the upload.
Since this is the stock ROM would dirty flashing as a update work okay?
EDIT: Nevermind, I used my eyes and read the OP.
EDIT 2: Successfully flashed. You the man! Been waiting to get this VOLTE fix. Big thanks :good:
bvsbutthd101 said:
Since this is the stock ROM would dirty flashing as a update work okay?
EDIT: Nevermind, I used my eyes and read the OP.
EDIT 2: Successfully flashed. You the man! Been waiting to get this VOLTE fix. Big thanks :good:
Click to expand...
Click to collapse
Hey bro what variant do you have and what build did you use?
zeft64 said:
Hey bro what variant do you have and what build did you use?
Click to expand...
Click to collapse
US model 4gb. Bought it from amazon, non amazon version obviously since I flashed this. I used the VZW build since I'm on Verizon.
Here is the official OTA for Aljeter XT1922-3
Blur_Version.27.221.2.aljeter.retail.en.US
And for the Jeter (thx @Starkiller2)
https://drive.google.com/file/d/11gkNx2NUcmifb6t31VhDfAafC0-HNfsp/view?usp=drivesdk
Swift2603 said:
Here is the official OTA for Aljeter XT1922-3
Blur_Version.27.221.2.aljeter.retail.en.US
Click to expand...
Click to collapse
Wrong forum.
Ragarianok said:
Wrong forum.
Click to expand...
Click to collapse
Because there is one for the play version now? Nope. Let it ride Thor. LoL
madbat99 said:
Because there is one for the play version now? Nope. Let it ride Thor. LoL
Click to expand...
Click to collapse
Well, there's literally a forum just for the Play version: https://forum.xda-developers.com/g6-play
Ragarianok said:
Well, there's literally a forum just for the Play version: https://forum.xda-developers.com/g6-play
Click to expand...
Click to collapse
Holy forum, I stand corrected. Haven't looked in a while. Thanks bro.
Well, I feel sheepish
Ragarianok said:
Wrong forum.
Click to expand...
Click to collapse
Thanks for the hint! The last time I looked for that G6 Play sub, it was dead.
Mods : Please move it to the G6 Play Forum then. Thx!
Here's the Jeter version
https://drive.google.com/file/d/11gkNx2NUcmifb6t31VhDfAafC0-HNfsp/view?usp=drivesdk
Starkiller2 said:
Here's the Jeter version
https://drive.google.com/file/d/11gkNx2NUcmifb6t31VhDfAafC0-HNfsp/view?usp=drivesdk
Click to expand...
Click to collapse
Huh? That's the Jeter ota to pie? Dude, nice. I poked around in the zip, it is indeed the OTA for the Sprint Moto g6 play, Jeter, to Android 9 pie.
madbat99 said:
Huh? That's the Jeter ota to pie? Dude, nice. I poked around in the zip, it is indeed the OTA for the Sprint Moto g6 play, Jeter, to Android 9 pie.
Click to expand...
Click to collapse
Yeah I was testing the final version. Snagged the ota. Already tested everything. Worked on locked and unlocked bootloader. Takes forever to install, so just wait. Root and decrypt still work exactly the same, with the same updated twrp. No issues.
Starkiller2 said:
Yeah I was testing the final version. Snagged the ota. Already tested everything. Worked on locked and unlocked bootloader. Takes forever to install, so just wait. Root and decrypt still work exactly the same, with the same updated twrp. No issues.
Click to expand...
Click to collapse
Great timing @Starkiller2
I got something to play with for the weekend.
hey man how do you go about flashing the ota for Jeter?
ASkUp said:
hey man how do you go about flashing the ota for Jeter?
Click to expand...
Click to collapse
It's an OTA. So you need to flash clean stock firmware on your phone (the one that is on it now, hopefully January patch for Sprint, boost, Virgin, etc)
Have the update in the root of your internal storage and check for updates manually. In settings/system/system updates. It should find it and run it.
Stock system, recovery, encryption, everything.
People keep saying that one button nav is disabled on Moto. It's not. Just have to enable it in Moto app
madbat99 said:
People keep saying that one button nav is disabled on Moto. It's not. Just have to enable it in Moto app
Click to expand...
Click to collapse
So do I actually flash, or can I just factory reset and then update? I'm not rooted .
Sergeantslaughter said:
So do I actually flash, or can I just factory reset and then update? I'm not rooted .
Click to expand...
Click to collapse
If you never rooted or anything, you can update.
I forgot 1 thing though, give storage permission to Motorola update service.
You don't have to factory reset.
madbat99 said:
If you never rooted or anything, you can update.
I forgot 1 thing though, give storage permission to Motorola update service.
You don't have to factory reset.
Click to expand...
Click to collapse
Do I just move the .zip file to my internal storage? Like listed with all the other folders? It won't let me move to (/) before my storage. Might be because it's Sprint update and I'm on Verizon..
---------- Post added at 03:34 PM ---------- Previous post was at 03:23 PM ----------
Swift2603 said:
Here is the official OTA for Aljeter XT1922-3
Blur_Version.27.221.2.aljeter.retail.en.US
And for the Jeter (thx @Starkiller2)
https://drive.google.com/file/d/11gkNx2NUcmifb6t31VhDfAafC0-HNfsp/view?usp=drivesdk
Click to expand...
Click to collapse
Does anyone have the ota for Verizon?....jeter
Sergeantslaughter said:
Do I just move the .zip file to my internal storage? Like listed with all the other folders? It won't let me move to (/) before my storage. Might be because it's Sprint update and I'm on Verizon..
---------- Post added at 03:34 PM ---------- Previous post was at 03:23 PM ----------
Does anyone have the ota for Verizon?....jeter
Click to expand...
Click to collapse
Oh no. It's for Sprint dude. That's why I said that to begin with. Dont even try this one.
Why would you even try that? I said Sprint, boost, Virgin Mobile.
madbat99 said:
Oh no. It's for Sprint dude. That's why I said that to begin with. Dont even try this one.
Why would you even try that? I said Sprint, boost, Virgin Mobile.
Click to expand...
Click to collapse
I hadn't tried it yet...that's y I was asking
Sergeantslaughter said:
I hadn't tried it yet...that's y I was asking
Click to expand...
Click to collapse
Whew... Close one. I thought I helped make a brick
I wish you guys would stop posting aljeter stuff in this forum. It's a different phone. Talk to the mods and get your own forum so you can stop messing up people's phones.