Related
Follow instructions in Blue 1pm est
Step 1: Talk and Text
What you need:
A QPST
B. HTC Diagnostic drivers for the Hero
C A Windows PC with either win7, XP or Vista running in 32 bit mode (64 bit will not work)
e. Cricket's 01039.prl -- get it here
fast PRL change dial ##PRL# and phone will enter prl mode, just browse to your sdcard and select 1039PRL, hit menu to change prl. Phone reboots. now call *228 to activation and program. NOW SKIP TO STEP 2.
step 1 long route
1. Once you have all of the items above installed, go to your number pad on your ERIS and dial ##3424# and hit Call. You will see a screen come up on the ERIS called the "DM Command Service."
2. Now, plug in your phone via the USB and your computer should install the necessary drivers. These will be the drivers mentioned above.
3. Once they are installed, open QPST Configuration, Listed under the QPST Folder on your start menu.
4. Click Ports, then click "Add New Port". You should see a port in the left part of the window. If not, unselect the button that says "Show Serial And USB/QC Diagnostic Ports Only".
5. Select the port and Click OK. There may be several ports, so repeat this process until you see a port where it says "Surf..."
6. Take not of which port says Surf, then open CDMA Workshop. Do not close QPST Configuration yet.
7. On the right side of the window select the same port as was in QPST with the word "Surf..." next to it and click "connect".
8. Click on the Security Tab on the top of the screen and click "Read" under the SPC/User Lock, ensuring that the default setting is listed in the drop-down menu.
9. Select the 6 digit number it generates and copy it.
10. Go back to the QPST Configuration and click on "Start Clients" and click on "Service Programming".
11. It will come up with a window displaying active phones. You should see one, the Surf....(whatever). Select it and click OK.
12. Click "read from phone". It will ask you for an MSL/SPC Code. Paste the 6 digit code you copied earlier and click Ok. In the settings tab you will see a box for the MSL/SPC code. Replace whatever is written in it with six zeros (000000). Click "write to phone". Ignore any errors that occur.
13. Click The CDMA Tab. Under Directory Number enter your 10 digit cricket number.
14. Click The Display Tab and type "Cricket" in the Banner.
15. Click the Roaming Tab and click "Browse" under the Preferred Roaming box.
16. Find and select the 01039.prl that you downloaded.
17. Click Write to Phone on the bottom. Ignore any errors that occur.
18. Unplug phone and dial *228.
Step 2. Setting up Web
What you need:
The same programs and drivers listed above
Anycut.apk-- get it in the android market place VIA Wifi.
1. Connect Phone Via QPST and open Service Programming. (See steps 1-3, 10 above)
2. Once you have begun Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000) -see step 12 above.
3. Click M.IP (may be M.IPv6 and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary ha, and secondary HA to all zeros.
7. On both HA Shared and AAA Shared Secret, click enter text string and type in the following password (all lower case): cricket
8. click ok
9. Set active user as 0.
10. Click PPP Config
11. The "Um" Button
12. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter cricket in the password box.
13.Click "AN" Button and repeat step 12.
14. Click "write to phone". Ignore any errors that occur.
YOUR DONE NOW
NexT Follow instructions from the 3rd post. Below by Token419 to apply cricketmmsweb.zip in recovery for fully functional web/MMS/and apps
15. Install the anycut.apk mentioned above on your HTC ERIS. If you need help with that, pm me and I will explain a few ways to do it.
16. Open Anycut and click New Short Cut.
17. Click Activity and scroll down to Proxy Settings. Select it and Click Ok on the window that comes up.
18. Go to The home screen on your Hero and find the Proxy Settings on your hero.
19. For Hostname enter: wap.mycricket.com and for port enter 8080.
Step 3: MMS!
What you need:
a. Android SDK---
b. Modified Telephony.db --
c. Have Eris phone flashed for talk text and web (see above if you have not done this).
1. Unzip android sdk to a place where you can find it (the shorter the directory name the better as you will soon see. Mine is saved in C:\android
Also unzip the telephony.db into a folder where you can find it. Mine is saved in C:\android
2. In windows xp click start, then run, then type cmd and hit enter. In Vista or windows 7 click start and type cmd in the search and hit enter.
3. Navigate to the folder where you unzipped the Android SDK. If you are not familiar with the command prompt, I will make a list of the commands I enter in blue. The rest you see will be the text that will be generated by the command prompt: CD the directory of adb!!! ex. type cd hit space the drag the tools folder into cmd window. now you can adb push/adb pull etc.
4. Type the Following command
C:\android\tools>adb root
* daemon started successfully *
adbd is running as root
--------------------------------------------------------------------------------------
5. Send the Modified telephony.db to the phone with the following command (keep in mind that you will need to substitute the directory I am using for the one where your telephony.db file is located
C:\android\tools> adb push c:\android\telephony.db /data/data/com.android.providers.telephony/databases/telephony.db
85 KB/s (4096 bytes in 0.046s)
6. Unplug your Phone and hold the power button to turn it off. Turn it back on and there you go!
some roms arent allowing the telephony.db to work giving 245kb/s or any other like 130kb/s.
My advice is if you get one to work, do a Nandroid back up, so you will always have a working web browser and MMS.
Download link 1 Download Link 2
.....space.....
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
As promised here is a zip file containing 2 flashable zips:
One will handle the OS side to get Web/MMS up and running
The other will only do the web portion (Some people don't have good luck with the MMS that i did)
Download from the attachment below, or from here:
http://www.multiupload.com/EKQ8CC27Y9
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
token419 said:
your instructions/title look exactly like brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit also you may want to change the words "hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from cdma ws, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. I simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
as promised here is a single flashable zip that will hande the os side to get web/mms up and running
download from the attachment below or from here:
http://www.multiupload.com/lx7zvgloc2
as always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
so does the same process work for metro pcs and where can i get those files
Should work with any carrier so long as you know the proxy information and apn settings, in my zip you can modify the autostart.sh file and change the port numbers and ip addresses to match your carrier, then you can edit the apn to match your carriers settings as well and you should be good.
Im working on getting one for metro for you all, but i dont have all the info required and iv been busy with work, its really simple to do, i just haven't gotten around to it yet.
token419 said:
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
As promised here is a single flashable zip that will hande the OS side to get Web/MMS up and running
Download from the attachment below or from here:
http://www.multiupload.com/LX7ZVGLOC2
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Puxxie said:
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Click to expand...
Click to collapse
Sorry about that, i reuploaded the file as well as modified the attatchment.
Use at your own risk, there are 2 flashes inside the zip, one for web and one for Web+mms, some people cant get the MMS to work, works fine for me, but not sure why it doesnt work for others.
Make a nandroid backup first as always and feel free to mod it however you want
You don't need QPST, and it is in fact easier WITHOUT QPST
You don't need Windows Vista or Windows 7 (or windows at all).
Thank you for your contribution for this community.
I posted a thread for full functionality as well, with a different methodology.
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
You don't need QPST, and it is in fact easier WIT
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Click to expand...
Click to collapse
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
qpst wont read my phone any thoughts or links?
i tried everything
You don't need, QPST.
Just open up your phone, then dial ##778 (call).
ALL of the settings you need to edit in QPST are available in your phone's built in program, EPST.
bigslanki said:
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
bigslanki,
No flaming intended. I was being serious when I said thank you for your contribution. All I've done is copied and pasted things from other sources that have worked for me as I've tried them. I should edit it more fully and maintain it better. Thank you for your suggestion.
I haven't used QPST since the days of ##778 on this phone, and I was only suggesting that less tech-savvy people, who may have trouble getting QPST working just right in Windows, might have an easier time without it.
All is well. Thank you, seriously, for your contribution.
What is the newest/easiest way?
Looks like alot of advancements have been made in the last 3 or 4 months to make the process easier. Is this thread still the best way to get an eris setup on Cricket with full functionality?
Please help out a noob! I've read so many posts, tried so may methods...I think I am SOOOOO close! But I just can't get the web/mms working.
Thanks!
Will this work for HTC Incredible? I seem to be stuck. *228 calls cricket but a voice says they can not program my phone. I have tried nearly ALL the prl files for cricket available on the link. I can call 611 from it also and speak to a csr but that was little/no help..
Please change this to hero thanks
Web on Eris
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
EthicsDesign said:
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
Click to expand...
Click to collapse
If you have a 3g indicator in the notification bar of your phone (as long as you have Mobile Network turned on - hold the power button, and turn it on, if it's not on already), then you're ready to flash the web/mms flash.
Flashing the web/mms flash or ANY kind of flash from Recovery will NOT affect your talk/text abilities whatsoever. It can only enhance the ability of your phone to do things.
I recommend flashing the Cricket v10 flash from token419's thread here, then using APN Backup & Restore to backup your APNs, modify them, then Restore them to make MMS work perfectly:
http://forum.xda-developers.com/showthread.php?t=730289
Let me know where you get stuck, if you get stuck.
Here's what I did, exactly, to get my ex-gf's working 100%
http://forum.xda-developers.com/showpost.php?p=7665352&postcount=135
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
EthicsDesign said:
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
Click to expand...
Click to collapse
That's not true.
But if you go into the store, and ask for your Android phone to be on Cricket, then yes, you'll have to pay for the plan.
Otherwise, unless they're keeping inventory of customer provided equipment (which they never have before), you're fine.
In their notes they just have 'customer-provided equipment' listed, not HTC Droid Eris.
I wouldn't worry about it. My ex-gf has this going on, so we'll see. Sprint is $69.99 for a better/faster/more reliable network, so if Cricket does this, they might lose out to that, unless people really use the unlimited minutes.
Quick question. I am very new to the android unlocking scene but I have done a good amount of research. Step 1 of this guide shows us how to get text and talk working for cricket (and I'm assuming Metro as long as you load the Metro prl). What I want to know is Step 1 EXACTLY the same as getting MetroFlashed minus adding the esn to Metro's db?
The reason I want to know is because I got my phone MetroFlashed and set up data and mms. The next day I did a hard reset. Contrary to others beliefs doing so put me back on Verizon so I brought it back to be flashed again. Now I'm reading this and would like to know if Step 1 is all I need to do to get back on Metro in the event I need to do another hard reset for whatever reason.
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
bump
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
After using the program for over a month, I was just randomly asked this by my device. Entering the serial number (behind the battery) did not do a thing. I tried deleting the bandswitch program from the program list (settings, delete programs). nothing. (I am not getting ANY connections)
I tried a system restore using SPB backup saved about 3 weeks ago. Tried backing up from an even further restore point with SPB backup.
nothing.
Connection manager cannot find ANY connections. unable to manually configure network. using At&t simcard never had a problem til now. everything was great. WHAT HAPPENED!?
I can't use my phone at all. I'm gonna have to wait until I get home and reflash/reinstall ROM to start fresh. But I really shouldnt have to (!). checked with at&t/cingular (california, usa) no problems with towers or anything on their end.
wtf.
swampy11 said:
So, when I get to the license menu, it asks for name and serial number. How do I enter my name and what serial number do I use?
Thanks for such a newbie question.
`swamp
Click to expand...
Click to collapse
You need to buy the license to get it, from the website..
Then need to enter the Owner Info (name). This menu is hidden by default. U need tweak to enable Owner Info. U can use BsB Tweak from here.
The owner name i located in Setting Tab >> Menu >> All Setting >> Personal >> Owner Info.
Actually, there's several alternative to Bandswitch which is free. U can use WMLongLife (search it) which have more option. Or u can add 3G Enable Comm Manager (to enable/disable 3G) and in combination with Advanced Configuration Tool (to get disconnect idle connection setting).
Bandswitch is not freeware. Install Touch Tools instead. It has an option for auto-disconnecting data, among other options.
I know I may get **** for this but I haven't found a thread that really delves into how to setup QPST from top to bottom. So I decided I'd make one.
HOW TO SETUP QPST FOR USE WITH YOUR PHONE
You can use QPST to do an array of things, most commonly on XDA though it is for Changing the Carrier Banner of your phone and tweaking the speaker of the phone to make it louder
The whole process should take under 10 Minutes.
disclaimer: I am not responsible for anything that happens to your phone.
Make sure your phone is plugged in, has debugging ON for the whole tutorial.
1. Temp Root yourself using whichever method you prefer ( I use this one)
2. Get your MSL using MSL Reader from the Market (free) OR Call Sprint to get your MSL OR Get your MSL using CDMA Workshop (which I will not go into as It is a different subject and not as easy as the aforementioned)
3. Get QPST and install it from here
Put your phone in diagnostic mode by punching in ##3424# in the dialer through out the whole rest tutorial, if it goes out of diag mode, just put it back into it by going to Dailer and punching in ##3423#
4. Download HTC Diag Drivers Both 32and 64 are in the zip
5. Install the QPST Drivers for your system (32bit or 64bit)
- A. Go into Device manager (from control panel)
- B. Find HTC Diag or HTC Diag Modem (along those lines)
- C. Right Click it and select update driver
- D. Select Browse computer for driver software
- E. Browse to the folder containing the drivers your downloaded in step 4 and then select the folder for your Windows version (32/64, if you don't know go to my computer and select properties)
- F. Click Next, it will install your drivers
6. Once your drivers are installed your device should be recognized and read as HTC Diagnostic Interface, followed by the port it is located on. For me it was COM5.
7. Open "QPST Configuration" by Start>All Proggrams>QPST>QPST Configuration
- A. Select "Add New Port"
- B. Input whatever port your phone is connected to (eg. "COM5" as mine was, without the quotes) in both the port, and label boxes.
- C. DESELECT The "Show Serial and USB/QC Diagnostic Ports only"
- D. Click OK
8. You should see the new added port and its state as ENABLED, if it is there, continue
9. Close the QPST Configuration windows now and now you can use your phone with QPST.
VIDEO GUIDE (CREDITS: DISTURB3D1 / WWJOSHDEW)
To change the banner of your phone: (CREDS TO SLAYER69, ORIG THREAD)
1. open up Service Programming via Start>All Programs>QPST>Service Programming
2. You should see your phone and the port its connected to (make sure your phone is in diagnostic mode ##3424# )
3. Click ok, now you should see a window with many tabs
4. At the bottom of the window you should see a button called "Read From Phone" Click it.
5. Input your MSL now in the box that shows up. Click OK
6. Now all of your phones settings are in the program.
7. Now navigate to the "Display" Tab, You should see a Box next to the word Banner. This is where you will enter what you want your banner to be. (Don't use any special characters)
8. Once you have done that, click "Write to Phone", located next to the Read from phone button at the bottom of the window.
9. Your phone should reboot, and your changes will have been made and can be viewed in the lockscreen, or in the pull down bar.
To increase the volume of your phone: (CREDS TO T3PROJECT, ORIG THREAD)
1. open up Service Programming via Start>All Programs>QPST>Service Programming
2. You should see your phone and the port its connected to (make sure your phone is in diagnostic mode ##3424# )
3. Click ok, now you should see a window with many tabs
4. At the bottom of the window you should see a button called "Read From Phone" Click it.
5. Input your MSL now in the box that shows up. Click OK
6. Now all of your phones settings are in the program.
7. Now Navigate to the "Sounds" tab, from here you can edit the loudness of your phone, I set mine to all 3s, although some have set theirs to 4. 1 is the quietest and 4 is the loudest. Your choice of what you want to input here.
I AM NOT RESPONSIBLE FOR ANY BLOWN SPEAKERS
8. Once you've selected the options you want click "Write to Phone", located next to the Read from phone button at the bottom of the window.
9. Your phone should reboot, and your changes will have been made.
ENJOY.
Credits to: slayer69 , t3project, and disturb3d1 If you give me a thanks, give them one too
To-Do: Add Screenies, make a youtube TUT
saweet !!!!!!!!!!!!
t3project said:
saweet !!!!!!!!!!!!
Click to expand...
Click to collapse
yepp, i noticed a bunch of people were havin trouble, so i just threw together a guide
Thank You!!!!!!! These are super, omega noob friendly instructions. Very easy to follow. Thank you so much.
dmablade said:
Thank You!!!!!!! These are super, omega noob friendly instructions. Very easy to follow. Thank you so much.
Click to expand...
Click to collapse
No problem, that was my whole reasoning for the thread in the first place
PS: love the nyan cat man
Heh, been using QPST since about 2005 and my old Samsung sph-a900.
It's easy.
Just be sure you load ALL the drivers for the phone (there are 3 or 4 depending on 32 or 64 bit).
You'll have to force feed them since they are not signed.
That means you'll probably have to load one at a time.
n2ishun said:
Heh, been using QPST since about 2005 and my old Samsung sph-a900.
It's easy.
Just be sure you load ALL the drivers for the phone (there are 3 or 4 depending on 32 or 64 bit).
You'll have to force feed them since they are not signed.
That means you'll probably have to load one at a time.
Click to expand...
Click to collapse
Yeah, it's easy for us, but many others consider anything beyond point and click or 1 click type things hard, so this is for them and the many newbies coming into the forum
Am i the only one having trouble with QPST finding my phone?
I've got the HTC Diag drivers installed successfully (Win7 x64).
The COM port in device manager is showing COM3.
I have my MRL and ive tried to go in View Mode and Edit Mode after typing ##(MRL)#
I added COM3 and it is showing as a USB link (which is correct).
But QPST is still saying No Phone.
Lintrix said:
Am i the only one having trouble with QPST finding my phone?
I've got the HTC Diag drivers installed successfully (Win7 x64).
The COM port in device manager is showing COM3.
I have my MRL and ive tried to go in View Mode and Edit Mode after typing ##(MRL)#
I added COM3 and it is showing as a USB link (which is correct).
But QPST is still saying No Phone.
Click to expand...
Click to collapse
I think you mean MSL, and you're doing it wrong.
you go into diag mode by pressing ##3424#, it is the same for all phones. After that go to Start>QPST>QPST Configuration, then click ADD PORT in the bottom left hand corner, for the port put "COM3" (without quotes) as the Port and Port Label, and make sure the Checkbox under it is UNCHECKED, I repeat UNCHECKED. Then click ok. Now you can close that windows and open Service Programming from Start>QPST>Service Programming
Make sure your phone is plugged in, debugging ON, and in DIAG mode (##3424#). From there you can continue on with my TUT above.
Well I can't seem to manage to get it to read either so I don't know I tired to see what com it was on to try and add it to make it see idk how to do this either I never had this much problems before and it claims u can do it without root so idk I'm lost plz help feeling like a noob
Great guide. Its nice to see postive post on how to make the evo3d better. Its a plus. With all the negative posts on this awsome phone Its great to see guides like this.
Locked & Loaded
This guide helped me so much!!!
Sent from my PG86100 using XDA App
Very nice right-up bro!! Makes it easy enough for anyone to do it. Thanks for you contribution to the forums; this should keep down some of the questions.
fowenati said:
you go into diag mode by pressing ##3424#, it is the same for all phones.
Click to expand...
Click to collapse
Thank you! I kept on putting in ##(my msl)#.
I guess I'm the only one that can't figure this **** out
Sent from my PG86100-EVO3D-using Tapatalk
Anon9mouz said:
Well I can't seem to manage to get it to read either so I don't know I tired to see what com it was on to try and add it to make it see idk how to do this either I never had this much problems before and it claims u can do it without root so idk I'm lost plz help feeling like a noob
Click to expand...
Click to collapse
Do you have the MSL? If you're rooted just get the MSL reader from the market. If not call Sprint and they should give it to you.
It would help if you could tell me where exactly you get stuck and if any errors show and what are they (Screen Shots Help)
stanglifemike said:
Very nice right-up bro!! Makes it easy enough for anyone to do it. Thanks for you contribution to the forums; this should keep down some of the questions.
Click to expand...
Click to collapse
Thanks man, expect more and I when I get the time (hopefully soon now) I hope to start theming, cooking roms, and maybe developing for android! In the meantime I'll do little guides to help where I can
dog44 said:
This guide helped me so much!!!
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
No problem!
laie1472 said:
Great guide. Its nice to see postive post on how to make the evo3d better. Its a plus. With all the negative posts on this awsome phone Its great to see guides like this.
Locked & Loaded
Click to expand...
Click to collapse
Thanks Laie, nice seeing u from the Heroc forums, I just try helpin
Appreciate the write up. Really helped me out.
Not sure what I'm doing wrong but can't update HTC diag driver's,I have win 7 32 bit and tryd with *86 and *64 nether would take,tryd new download of drivers still get window's can't find update any ideas ?
sarmento5150 said:
Not sure what I'm doing wrong but can't update HTC diag driver's,I have win 7 32 bit and tryd with *86 and *64 nether would take,tryd new download of drivers still get window's can't find update any ideas ?
Click to expand...
Click to collapse
What exactly does it say? Are you able to get to the load from disc screen to browse for the files? Make sure you select the WHOLE folder when selecting the drivers, not just a single INF file, that way all the things in the folder get loaded.
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.
before i asked many people for fix but no correct solution is got but ( thanks for devs support). now i experimented and solved imei and efs partition currupted by qcn method
NOTE: ( third party qualcomm imei changing softwares will not work i tried many but no use)
steps
1. first download tools and install
2. go to qpst.exe in c:/programfiles/qualcomm/bin/qpst
3. now connect your phone open port by dialing(*#*#76937#*#) in stock
4. check whether qualcomm diagnostic port is enabled or not in device manager
5. if it shown enabled and device info its connected through diag port in qpst
6. now click software download and take backup of ur partition and save as (.qcn) and click on start it will read ur partition and
xx.qcn file will created(xx is any name)
7. now open hex editor search your imei number with [08xa] x is your starting digit of imei example(087a) for second imei click
find next option
8. now open your imei convertor and palce your imei and click convert
9. replace that converted imei in the form of hexadcimal replace with old imei same for second imei
10. important thing is while saving the file only by (save as) which is important if any mistake is happen we cant recover after
restoring in efs partition.
11. after saving again go to qpst npw go to restore option now click on start .
thats it! you got imei and signal:laugh::laugh::laugh:
i struggled 3 days for this to find correct way recover my ime
tools here
I would suggest to install Xposed and you can find IMEI changer in the download section. This will change only one IMEI number though. I mean IMEI1=IMEI2.
Another option is to use DFS tools.
And a 3rd option is to use Xiaomi (or similar for dual SIM) IMEI changer, you can use it to change both IMEI numbers.
All can be done provided that you have the box that the phone was packed in with the IMEI numbers on it.
valy_cta said:
I would suggest to install Xposed and you can find IMEI changer in the download section. This will change only one IMEI number though. I mean IMEI1=IMEI2.
Another option is to use DFS tools.
And a 3rd option is to use Xiaomi (or similar for dual SIM) IMEI changer, you can use it to change both IMEI numbers.
All can be done provided that you have the box that the phone was packed in with the IMEI numbers on it.
Click to expand...
Click to collapse
brother can you give links of that tools and restored backup up of other lemax2 so getting imei 0 and no service what should i do now?
marshharsha said:
brother can you give links of that tools and restored backup up of other lemax2 so getting imei 0 and no service what should i do now?
Click to expand...
Click to collapse
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
valy_cta said:
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
Click to expand...
Click to collapse
thank you very much and sorry for the in convenience
valy_cta said:
Go to the section Guides where you have posted in a topic with "unlock bands..." There you have all what you need in the OP. Connect your phone in DFS tool, check the section where you have IMEI and update it.
Or use what I wrote with Xposed and IMEI changer.
PLEASE DO NOT CREATE ANY MORE THREADS!!!
Click to expand...
Click to collapse
sir i downloaded i triedwrite imei but its only sim 1 imei apearing
sim2 showing unknown
Search for "WriteDualIMEI(W+G_eMMC).exe" file. Once you found it, check instructions on google to change the IMEI. It is working for Xiaomi devices as far as I remember. I tried on LeMax2 and it worked. I said I'll do a guide but time did not allow and also I forgot later on. For sure you can find instructions on xda as well.
This is the only tool I found to change both IMEIs.
Good luck!
---------- Post added at 11:38 AM ---------- Previous post was at 11:26 AM ----------
valy_cta said:
Search for "WriteDualIMEI(W+G_eMMC).exe" file. Once you found it, check instructions on google to change the IMEI. It is working for Xiaomi devices as far as I remember. I tried on LeMax2 and it worked. I said I'll do a guide but time did not allow and also I forgot later on. For sure you can find instructions on xda as well.
This is the only tool I found to change both IMEIs.
Good luck!
Click to expand...
Click to collapse
I'll write down the instructions for you.
1. Phone should be rooted, adb drivers installed
2. Connect the phone to PC and select MTP and USB debugging
3. Open command prompt from Start. In Run, type cmd.exe
4. Type in the command prompt the following: adb shell
5. Then it should show [email protected]_x2:
6. Then type: su
7. Grant access on the phone
8. Then it should show [email protected]_x2:/ #
9. Type: setprop sys.usb.config diag,adb
10. The phone will go to Diag mode, check in device manager if it's like this. It should show at section Ports: Qualcomm HS-USB Android DIAG 901D (COM6). "6" is an example.
11. Open the WriteDualIMEI app and you should see in COM: COM6. This means that device is connected and you can type in the IMEIs.
12. Press START and that's it.