before flashing a new rom i wiped all data,cache,storage etc ,and it was not mounting usb storage so that i could transfer another back up of new rom ,few momments later i rebooted my phone with no os ,but it stucks on the logo screen ,i tried to take it in flash mode and fastboot mode but invain .it goes into flash mode and fastboot mode for 8-10 second and after that it boots ,after many tries it finally entered fastboot mode and i flashed the kernal ,now i can go into the recovery again but still couldn't mount usb storage , plz somebody help me :crying: and sorry for my bad english
Abdullahtariq said:
before flashing a new rom i wiped all data,cache,storage etc ,and it was not mounting usb storage so that i could transfer another back up of new rom ,few momments later i rebooted my phone with no os ,but it stucks on the logo screen ,i tried to take it in flash mode and fastboot mode but invain .it goes into flash mode and fastboot mode for 8-10 second and after that it boots ,after many tries it finally entered fastboot mode and i flashed the kernal ,now i can go into the recovery again but still couldn't mount usb storage , plz somebody help me :crying: and sorry for my bad english
Click to expand...
Click to collapse
So just to confirm : Did you try the following: Recovery > Mounts > Mount USB Storage
yes,I tried it but no device is being showned at the pc
Almost same but more severe problem here.
I installed Performance ROM. But there was some problem with it. It was unable to mount storage to PC and many time it showed "USB Device not recognized. So I installed a Multi-mount USB storage and used it. It mounted my phone's storage that day but, the other day, the problem got bigger. When I connect my phone, it showed nothing. No warning or error message at all! THe phone was just charging, that's all! Still today I'm facing this problem. But today I tried to change the ROM by copying files via Wi-Fi. I installed Experimental kernel v12 and Stock based Proted JB .100 firmware ZIP. Installed it by wiping everything but still the problem's same. Please fix. My PC isn't showing anything! Neither any notification nor any error message on connection. I also tried to change the mode from USB MTP to MSC and PTP, still no result. :crying::crying:
Ok, have you tried other means of getting the data on the sd card? Perhaps you can use a sd card reader or another phone to connect it to the PC and copy the files onto that.
Insert the sd card back to ur phone and then in recovery flash the new files...
Don't you know XU??
rlvl said:
Ok, have you tried other means of getting the data on the sd card? Perhaps you can use a sd card reader or another phone to connect it to the PC and copy the files onto that.
Insert the sd card back to ur phone and then in recovery flash the new files...
Click to expand...
Click to collapse
That's ridiculous! I mean to say that Sony Xperia U don't have SD card. So no option except if you've an OS, you can copy files over Wi-fi but if you don't have OS and a non-working USB slot, you can do nothing except sending it to Xperia Service Center. That's whit I did and it'll take approx 15 days for them to "FIND" and "FIX" the problem even after my explanation on what I did.....
cy56 said:
That's ridiculous! I mean to say that Sony Xperia U don't have SD card. So no option except if you've an OS, you can copy files over Wi-fi but if you don't have OS and a non-working USB slot, you can do nothing except sending it to Xperia Service Center. That's whit I did and it'll take approx 15 days for them to "FIND" and "FIX" the problem even after my explanation on what I did.....
Click to expand...
Click to collapse
Ah Yes! The Xperia U sadly doesn't come with SD...
In that case, one last check..
In the mounts section does the is the system unticked?
After that perhaps you will find your answer here:
http://forum.xda-developers.com/showthread.php?t=1667929
rlvl said:
Ah Yes! The Xperia U sadly doesn't come with SD...
In that case, one last check..
In the mounts section does the is the system unticked?
After that perhaps you will find your answer here:
http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
Hmm..... Thanks for this but the phone was just charging on connecting USB, tried changing USB cable, and everything else as I said earlier but none worked. So I sent it to Xperia Care. From the past 5 days they're inspecting that what happened with my phone but still can't fix it. Let's see what happens.....
rlvl said:
Ah Yes! The Xperia U sadly doesn't come with SD...
In that case, one last check..
In the mounts section does the is the system unticked?
After that perhaps you will find your answer here:
http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
Today I got my phone back from Xperia Care. They said that to change the USB we need to change the Motherboard and it'll cost INR 5000 (This is 40% of total cost of brand new phone). Is that right to spend so much money?
cy56 said:
Today I got my phone back from Xperia Care. They said that to change the USB we need to change the Motherboard and it'll cost INR 5000 (This is 40% of total cost of brand new phone). Is that right to spend so much money?
Click to expand...
Click to collapse
Nope! If you ask me , add another 2k to the price and you will find yourself looking at brand new phones with better screens , more RAM and better processing power.
rlvl said:
Nope! If you ask me , add another 2k to the price and you will find yourself looking at brand new phones with better screens , more RAM and better processing power.
Click to expand...
Click to collapse
Ya you're right! But I need to sell this phone first and who will buy this BOX?? It doesn't have any OS installed and USB doesn't works.
Related
Hey guys. So, I bricked my phone. I installed RomManager, then ClockworkMode through it, thus I knew that this phone is not supported. It wasn't there in that list, so I chose Commtiva z71 or something like that. My phone doesn't get in download mode anymore. Could this be fixed at home? I really don't want to take it to a service centre.
Please help me. Thanks!
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
after rooting my phone samsung galaxy 5 doesnt turn on
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Jordanooo said:
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I5500 using Tapatalk
Threw it guys. It sucked anyway.
It doesn't suck, its amazing
Sent from my GT-I5500 using Tapatalk
dead ur smart
quebeco said:
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Click to expand...
Click to collapse
Exactly as u .i try to backup my rom and my samsung was dead in 5 seconds.I sent them to service twice The firt my motherboard is dead and i wait the second time because i thing is dead again I dont use rom manager never
did you tried to download ClockWorkmodRecovery(cwm) than flash with odin multi downloader and then wipe data?
first step i found in solving this issue
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
no need
rstar900 said:
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
no need to pull battery out and insert it back just insert the battery ,hold down the option key & insert usb cable thats it....but none of these gonna work you will need JTag to flash
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Bhargav97 said:
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Click to expand...
Click to collapse
That's not true, sadly. ROM Manager embeds a version of flash_image that will try to flash a boot image to bml8 if the device is not properly recognised. That's what happened for the OP, so a JIG will not resurrect the phone.
Oh...Sorry, I didn't knew that! So, final option left for OP is a JTAG flash.
@psyke83
Seems like out of your 3 bricks, this is one.
Hi All,
Today, dropped my S2 and touch screen got shattered completely.. Phone powers on but no display at all.. I had set password to unlock screen..
I want to take backup before sending for repairs.. Googled a lot but no clear ans or procedure.. Pls help me as i need to backup precious data on my PC. Tried using Kies but reports "connection locked" error asking to unlock the device. Screen not working so cant unlock it :-(
M a newbie so detailed explanation will be helpful..
Rgds,
Broken screen
If you can't connect your mobile to the PC it will be so hard look for backup!
But... I am thinking that...
Maybe you can flash a new ROM...
if you can go in DOWLOAD MODE...
but i suppose that your settings, as the password, will remain active... maybe a modded ROM.
Sent from my GT-I9100 using XDA App
Can't you just see the internal sdcard when you plug in the USB cable to your PC as a disk?
Sent from my GT-I9100 using Tapatalk
Connect fone to Kies once connect you should be able to enter PW via computer. And so be able to back you your fone...
Nyssa1104 said:
Connect fone to Kies once connect you should be able to enter PW via computer. And so be able to back you your fone...
Click to expand...
Click to collapse
Thanks for your response. I tried but Kies (v2.1.0.11112_41) reports connection locked error and suggests to enter password on connected device. I cant since whole screen is broken and its completely blank :-(
alinefr said:
Can't you just see the internal sdcard when you plug in the USB cable to your PC as a disk?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks for replying.. I dont have SD card in it.. Just bought phone abt a month ago and was planning to order one..
Skyman1 said:
If you can't connect your mobile to the PC it will be so hard look for backup!
But... I am thinking that...
Maybe you can flash a new ROM...
if you can go in DOWLOAD MODE...
but i suppose that your settings, as the password, will remain active... maybe a modded ROM.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Humm.. Phone is detected in device manager as Samsung USB composite and Modem device but Kies (2.1.0.11112_41) reports connection locked error. M wondering if there is another tool/driver that can allow to either unlock device from computer or get access to file system on phone. Kindly advise..
brokenscreen said:
Hi All,
Today, dropped my S2 and touch screen got shattered completely.. Phone powers on but no display at all.. I had set password to unlock screen..
I want to take backup before sending for repairs.. Googled a lot but no clear ans or procedure.. Pls help me as i need to backup precious data on my PC. Tried using Kies but reports "connection locked" error asking to unlock the device. Screen not working so cant unlock it :-(
M a newbie so detailed explanation will be helpful..
Rgds,
Broken screen
Click to expand...
Click to collapse
how much are u paying for the repair?
i charge 145
broken screen
i also managed to break my gs2 screen today. ive taken it to vodafone however they claim that for data protection they have to wipe all data on the phone if you have found a solution i beg you to get in touch.
simple method:
1.put the phone in download mode
2.download the tar file of a custom kernel(like siyah) which can mount your storage from cwm.
3.flash the file via odin and enter cwm.(press the key combo to enter cwm)
4.now ask some other users who use the same kernel to tell you the number of key press needed(and in which direction) to mount your sd card.
5. now your internal sd will show up in pc.
6. backup all the data now.
you can also backup all your apps +data using step 4
replace it yourself, it is dead easy...google youtube for an instruction video (did replace my daughters SGS2 broken screen in under half an hour)
hello My Samsung Galaxy SII has a broken display and i need to connect it up to retrieve key data but it won`t connect to kies...is there any way that i can?
Display is black. Phone is working ok
Can you help me? :crying:
You should be able to pull your stuff with ADB. Google and/or XDA search should yield you plenty of tutorials/how-to's on using ADB.
Edit - Provided you had debugging turned on prior to the display being broken.
Murphy's law is with me tonight. Tomorrow, I'm meeting someone who wants to buy my xperia P so tonight I plugged out my sim-card, deleted my stuff on the sd-card and did a factory reset. When I rebooted the device to check if indeed everything was deleted, my pc didn't recognise the device. I tried on an other pc but no reaction. I hear the connecting sound and get a notification on the pc that says "usb device not recognised". I tried installing the drivers via SUS but that didn't change anything. I then tried if my sim-card worked but the device gives a notification: the simcard could not be recognised. My simcard is working correctly as it works in an other cellphone. I then thought I could install titanium backup to search for an old backup but I can't even get the wifi going. I also installed other roms but I can't mount /system. The device I have is rooted and unlocked.
Could you help me solve this issue?
Can't understand the problem exactly, is the device booting? If it is what does it mean you cannot mount system?
You also say you have installed other roms, that require mounting of system.
What FW is installed?
ChikeD said:
Can't understand the problem exactly, is the device booting? If it is what does it mean you cannot mount system?
You also say you have installed other roms, that require mounting of system.
What FW is installed?
Click to expand...
Click to collapse
The device was booting but now it's stuck on the Sony image (before the loading image)
The problem is: the device doesn't recognise any simcard. I can't turn on wifi nor does the pc recognise my phone.
When in CWM (when I try installing a new rom that was already on the phone's sd-card beforehand) I can't mount /system.
I can pick a ftf from my sd-card to install a rom but afterwards the problems stay the same: no sim, no wifi, no usb connection possible.
r3inhout said:
The device was booting but now it's stuck on the Sony image (before the loading image)
The problem is: the device doesn't recognise any simcard. I can't turn on wifi nor does the pc recognise my phone.
When in CWM (when I try installing a new rom that was already on the phone's sd-card beforehand) I can't mount /system.
I can pick a ftf from my sd-card to install a rom but afterwards the problems stay the same: no sim, no wifi, no usb connection possible.
Click to expand...
Click to collapse
Can you enter fastboot or flash mode, and do you have flashtool and firmware to flash?
ChikeD said:
Can you enter fastboot or flash mode, and do you have flashtool and firmware to flash?
Click to expand...
Click to collapse
After a lot of cursing and sweating I managed to get it in fastboot, install an ics ftf and now it's updating via pc companion (wifi and pc connection work as before). The only problem that still exists now is the fact that the device doesn't recognise my sim-card. I checked if I didn't put it in the other way around but it's in the right position. I'm sure the sim works because I tested it in another cellphone.
Thanks a lot for helping me
I have never flashed FW with fastboot only kernels.
Maybe it have flashed, TA partition which is normaly not flashed?
Lets see after the update.
ChikeD said:
I have never flashed FW with fastboot only kernels.
Maybe it have flashed, TA partition which is normaly not flashed?
Lets see after the update.
Click to expand...
Click to collapse
I'm sorry it was in FlashMode The update gives me an error but somehow after I rebooted, the sim is now recognised :s
The only problem now is that I'm stuck in JB but I'm doubting to try anything else.
This cellphone has been nothing but random misery to me for the past 6 months The problem with the randomness is that I can't show it to the service centers (they keep on telling me they can't reproduce the problem).
r3inhout said:
I'm sorry it was in FlashMode The update gives me an error but somehow after I rebooted, the sim is now recognised :s
The only problem now is that I'm stuck in JB but I'm doubting to try anything else.
This cellphone has been nothing but random misery to me for the past 6 months The problem with the randomness is that I can't show it to the service centers (they keep on telling me they can't reproduce the problem).
Click to expand...
Click to collapse
Stuck with JB? You rather ICS?
I have recently uploaded Stock ICS 6.1.1.b.1.75 that I have.
ChikeD said:
Stuck with JB? You rather ICS?
I have recently uploaded Stock ICS 6.1.1.b.1.75 that I have.
Click to expand...
Click to collapse
Yea sorry I meant stuck on ICS. It's 2AM now over here so I'm getting a little bit tired I think I'll be able to find an ftf for JB with the search button tomorrow. Anyway, I thank you for your help I'm glad I found Flash tool to fix my problem.
hello,
my Xperia P's Usb port is now working it's charging but couldn't connect to any PC or OTG Media ....
as PC connection not working so i m unable to flash my phone in flashboot mode.
i tried to consult to service center guys they say as my device is rooted they can't help me fix this problem....
i don't want to loose my phone please help me.... every thing in my phone is brand new and original but as i use custom kernel & rom ...so they are not accepting my phone ....
is there any other way i can use to flash my device to stock ... so i can get it fixed .
i can turn on my phone but it shows no sim no wifi ...
please help...
thanking you
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
ChikeD said:
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
Click to expand...
Click to collapse
yes i checked .. flash mode is not working not even fastboot mode ...
yes it's charging ...i tried 4-5 different cables ...i also checked cables with my brother's phone they were working fine...
it started a week before everything was working great i tried to connect my device i thought it would b new rom's problem so it will b fixed... so i try to flash other rom but accidentally i formatted system after wiping data and factory reset ... but that rom hangs as it says unable to mount system...
i try the older rom it flashed but in about phone there's baseband version is unknown, wifi was not turning on and i can't gain root access via terminal emulator or titanium backup or any other root app...
i thought to revert everything back via flashtool but my device couldn't be connected in flash mode... green light goes on n turned to red again and battery start to charge ...
sorry for wrong english ...
but thanks for your interest and reply ...
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
miteshlakhwani said:
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
Click to expand...
Click to collapse
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
i also try to get it diagnosed at local street repair shop as sony service center guys behaved really bad with me ... not even check my device they turn it on instead of sony logo it shows nemesis kernel logo so they say your device is rooted we can't accept it ...
i felt v.bad ...
local street repair guy told me to leave my device with hi for a day or 2 ... but i don't trust them so i couldn't do that...
he told me that port is ok it might b an ic chip which get's fungus or any kind of short circuit is happening there only ...
i m totally confused
thanks for ur reply
ChikeD said:
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
Click to expand...
Click to collapse
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
miteshlakhwani said:
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
Click to expand...
Click to collapse
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
ChikeD said:
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
Click to expand...
Click to collapse
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
miteshlakhwani said:
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
Click to expand...
Click to collapse
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
ChikeD said:
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
Click to expand...
Click to collapse
i also tried that too in CWm too there's no sign of any connection in pc ...
service center guy said that replacing port is not possible so they had to replace complete board ... n that will cost around 80% of cost of device....
but they won't do it as my device is rooted ...
This happened with my S3 just recently and they swore it wasn't the USB connector if it would charge. I called T-Mobile and got upset and told them I plug in an identical S3 and it shows immediately with mine it won't not even in download mode. They swapped it out for me.
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
dara007_168 said:
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
Click to expand...
Click to collapse
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
ChikeD said:
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
Click to expand...
Click to collapse
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
No SD card, and you can relock BL, but not without flashtool.
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
miteshlakhwani said:
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
Click to expand...
Click to collapse
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
dara007_168 said:
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes i enquire about replacing board from sony service center they told it will cost approx 80% of cost of mobile ...
I need help!
My phone has been hard bricked for awhile now but i'm not giving up on it. Recently it started vibrating every 2 seconds for about 5 minutes then it would stop.Also the screen flashes a white line across it.
I made a 350mb image yesterday just to see if the 195mb image was too small and it made the phone vibrate more and for longer this time so i know i'm very close to something here.Somebody please let me know what i'm doing wrong
frasslee said:
I need help!
My phone has been hard bricked for awhile now but i'm not giving up on it. Recently it started vibrating every 2 seconds for about 5 minutes then it would stop.Also the screen flashes a white line across it.
I made a 350mb image yesterday just to see if the 195mb image was too small and it made the phone vibrate more and for longer this time so i know i'm very close to something here.Somebody please let me know what i'm doing wrong
Click to expand...
Click to collapse
I assume you have a sprint note 3, so if you do and you where running NC5 4.4.2 this may help. First go this thread http://forum.xda-developers.com/showthread.php?t=2625332 read through the threads posted there. Especially this thread http://forum.xda-developers.com/showthread.php?t=2600869 That should give you a basic idea of the steps you need to take. Then you will be asked to create a boot img for your Sprint N900P, here is link to an img that is already done for the N900P http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG Basically you will have to copy and paste a boot img to a formatted/erased ext sd card, via a USB cable from you device to a PC ( provided your PC will recognize the USB cable when connected to your device). Or you can use an adapter to get the sd card hooked up to your PC. Enjoy !!!
jimzweb1 said:
I assume you have a sprint note 3, so if you do and you where running NC5 4.4.2 this may help. First go this thread http://forum.xda-developers.com/showthread.php?t=2625332 read through the threads posted there. Especially this thread http://forum.xda-developers.com/showthread.php?t=2600869 That should give you a basic idea of the steps you need to take. Then you will be asked to create a boot img for your Sprint N900P, here is link to an img that is already done for the N900P http://www.mediafire.com/download/l6q1152x5c9d4h6/N900PUnbrick_IMG Basically you will have to copy and paste a boot img to a formatted/erased ext sd card, via a USB cable from you device to a PC ( provided your PC will recognize the USB cable when connected to your device). Or you can use an adapter to get the sd card hooked up to your PC. Enjoy !!!
Click to expand...
Click to collapse
Thanks but I got that whole down already.
My issue is that none of the images work or there is just something more to this.At first my pc recognized my phone when i plugged it in (qualcomm hs-usb) but now it's not showing up anymore.
The phone just sits there and vibrates all with the white line like it wants to boot but something is stopping it.
Jtag is my last option as i wanna try and fix it myself.
Oh and i forgot to mention that i had made a mistake and restored my galaxy s4 efs backup.The phone never booted up after that
The weird thing now is that the phone is charging the battery.But it's just constantly vibrating
Somebody please help me
frasslee said:
The weird thing now is that the phone is charging the battery.But it's just constantly vibrating
Somebody please help me
Click to expand...
Click to collapse
Have you tried a battery pull then put it back in and try the 3 button Recovery combo? Atleast you have some life in the device so its not hard bricked.
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
frasslee said:
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
Click to expand...
Click to collapse
You may have a bad sdcard. I see posts about corrupt sdcards maybe a new card? You have a class 10 card? I have a few debrick tools if youd like them. But ive seen youve already tried that. I feel your pain man I have a brand new hard bricked s4 in my phone graveyard.
frasslee said:
I've tried everything.If it was soft bricked at least I would get into download mode.But that's all the phone does is vibrate.I just feel like I'm missing something.
It won't get recognised by my PC unless the memory card is out and that's weird.It takes about 5 minutes to pop up in device manager as Qualcomm hs-usb 9008(idk) and as soon as I try the button combo it disappears
Click to expand...
Click to collapse
Ok bud here we go, I run a Sprint Note 3 4.4.2 NC5 stock rooted CWM recovery. I downloaded the bootloader backup zip from here http://forum.xda-developers.com/showthread.php?t=2439367 it created a debrick zip, then I extracted it, and it is a 128mb debrick.img file just like the thread states it should be here is the link http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img you will need to also download an IMG burner program to your PC. Here is the link http://sourceforge.net/projects/win32diskimager/files/latest/download burn the img file to a completely blank/erased ext sd card from your windows PC. Then remove your battery install sd card, install battery and power up device.
A couple things I found, one the sd card size has to mirror the memory size of the device, i.e. 16gb device needs a 16gb sd card. Two the sd card when flashed with the Debrick img file has to formatted as unblocked, and may have to be retitled to be recognized.
Next I tried the Unbrick Creater zip the link is here http://forum.xda-developers.com/showthread.php?t=2651696 and the file it created is here http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz not sure what to do with it, but it is from my working device. Let me know if any of this works !!!
jimzweb1 said:
Ok bud here we go, I run a Sprint Note 3 4.4.2 NC5 stock rooted CWM recovery. I downloaded the bootloader backup zip from here http://forum.xda-developers.com/showthread.php?t=2439367 it created a debrick zip, then I extracted it, and it is a 128mb debrick.img file just like the thread states it should be here is the link http://www.mediafire.com/download/c396cy9uxyg7mck/debrick.img you will need to also download an IMG burner program to your PC. Here is the link http://sourceforge.net/projects/win32diskimager/files/latest/download burn the img file to a completely blank/erased ext sd card from your windows PC. Then remove your battery install sd card, install battery and power up device.
A couple things I found, one the sd card size has to mirror the memory size of the device, i.e. 16gb device needs a 16gb sd card. Two the sd card when flashed with the Debrick img file has to formatted as unblocked, and may have to be retitled to be recognized.
Next I tried the Unbrick Creater zip the link is here http://forum.xda-developers.com/showthread.php?t=2651696 and the file it created is here http://www.mediafire.com/download/l290jcibb29q4r0/Unbrick_IMG.gz not sure what to do with it, but it is from my working device. Let me know if any of this works !!!
Click to expand...
Click to collapse
Still nothing. I'm going to try all weekend and if it still doesn't work I'll just send it off to go get it jtagged
frasslee said:
Still nothing. I'm going to try all weekend and if it still doesn't work I'll just send it off to go get it jtagged
Click to expand...
Click to collapse
Ok I will keep reading the threads. Have you tried with the 128gb img file on the ext sd card to start the device in download mode ( all three buttons) as opposed to just pushing the power button ? Red that somewhere. I pick up bits and pieces here and there, sooner or later maybe we will find the missing part.
Have you tried to use a USB jig to boot into download mode ? You can you buy them on ebay for $10 or here is video on how to make one https://www.youtube.com/watch?v=jKRrTZayRxU or https://www.youtube.com/watch?v=Rdn5GoRjhn0 it is a different device but the concept is the same.
I was thinking of buying one the other day. Maybe just maybe one a button is not working. I'll order the jig tonight. Or make one this weekend
Later I'm going to swap motherboards and see if it's a button that's causing my problems.
Bless you bro and thank you for all your help
frasslee said:
I was thinking of buying one the other day. Maybe just maybe one a button is not working. I'll order the jig tonight. Or make one this weekend
Later I'm going to swap motherboards and see if it's a button that's causing my problems.
Bless you bro and thank you for all your help
Click to expand...
Click to collapse
Cool just for info type USB jig in Google images. The video from zedomax is pretty good.