[Q] Bricked GT-P7500 - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi, i just got a bricked GT-P7500 which previously had Cyanogen nightly build on it and i was wondering how to install another firmware on it using odin, and which firmware i should install on it, i searched the forum and found the site sammobile, but it gives me a ton of results and i don't know which one i should choose , also are there any stable custom firmwares for the GT-P7500? also is there a driver for the GT-P7500?
Please help,
Thanks in advance.

Just choose by your region, and of course newest version (4.0.4)

Augiz said:
Just choose by your region, and of course newest version (4.0.4)
Click to expand...
Click to collapse
I did that, everything went ok with odin, but it seems to still be bricked, although differently now, its stuck on the boot animation, with the glowing samsung logo, its been 10 minutes at least now... what should i do? please help !

griffinx15 said:
I did that, everything went ok with odin, but it seems to still be bricked, although differently now, its stuck on the boot animation, with the glowing samsung logo, its been 10 minutes at least now... what should i do? please help !
Click to expand...
Click to collapse
Hi,
I encountered the same thing with my device. Press and hold the power button until the screen is off (device is restarting) and press power + volume down button to go into recovery. Perform the data and cache wipes and reboot the device. It should be booting into Android after that.

ZerReaper said:
Hi,
I encountered the same thing with my device. Press and hold the power button until the screen is off (device is restarting) and press power + volume down button to go into recovery. Perform the data and cache wipes and reboot the device. It should be booting into Android after that.
Click to expand...
Click to collapse
Yep i did that, it works now!
Thanks for the help everyone!

Related

[Q] Help Please! Motorola Motoluxe Won't Boot Past Motorola Logo?!

Hello,
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
Can anyone help?
I am terribly sorry if this has been asked before or sounds like a nooby question, desktops and laptops are more my thing, don't know as much about mobile devices. Also there are not many helpful threads on the internet as apparently this is an underrated phone :/
Thanks for any help
The Motoluxe page suggested I do this
1. Power up the phone by pressing the VOL UP + VOL DOWN KEYtogether + PWR KEY
2. The device will start up with Motorola logo and power up to a little Androidman logo with Exclamation mark
3. Tap the HOME soft key at the bottom of the device (In between the MENU andthe RETURN soft keys)
4. The device will display BLUE Text on a Black background
5. Press the VOL DOWN key till the Wipe data / factory reset is selected andpress the PWR key to confirm the selection
6. Use the VOL DOWN key again to select YES - delete all user data and pressthe PWR key to CONFIRM
7. The device will then start performing the Factory Data Reset
8. Once the Formatting is complete , press the PWR key to confirm a REBOOT
9. The message rebooting is displayed on the phone
10. The device will reboot and start the normal power up sequence
Which does not actually work
McreativeH said:
Hello,
I have rooted my device and then downloaded CWM and tried to install Cyanogen Mod, I have tried this before and it just rebooted with nothing happening. This time the device would not boot past the motorola logo. I took out the battery and attempted to boot but again the device got stuck at the moto logo.
Can anyone help?
I am terribly sorry if this has been asked before or sounds like a nooby question, desktops and laptops are more my thing, don't know as much about mobile devices. Also there are not many helpful threads on the internet as apparently this is an underrated phone :/
Thanks for any help
Mac
Click to expand...
Click to collapse
1st thing, cyanogenmod has an inbuilt recovery. After installing cm u SHOULD NOT install any other recoveries. For now I believe u r soft bricked. U ll need to fxz back to stock to come out of it.!
Sent from my OC ed mind.!
Lifehacker7 said:
1st thing, cyanogenmod has an inbuilt recovery. After installing cm u SHOULD NOT install any other recoveries. For now I believe u r soft bricked. U ll need to fxz back to stock to come out of it.!
Sent from my OC ed mind.!
Click to expand...
Click to collapse
Okay so how do I fxz back to stock? Sorry this is my first android phone sorry to seem like a noob
McreativeH said:
Okay so how do I fxz back to stock? Sorry this is my first android phone sorry to seem like a noob
Click to expand...
Click to collapse
flash or odin stock rom
Victordevs said:
flash or odin stock rom
Click to expand...
Click to collapse
Do you think you could link me to a tutorial or something on how to do this please?
I read somewhere about holding Vol down and camera button while plugging in a USB cable so I tried it and this brought up a red screen with text that says
MBM Flash-mode.
IronMax
version: 0.1.11
Bootloader USB Init SECURE BOOT ENABLED
Click to expand...
Click to collapse
using the volume buttons on this screen does nothing, neither do the soft keys but pressing the power button says
Power key reset.
Click to expand...
Click to collapse
then it just gets stuck on the Motorola logo again

[Q] [q]Stuck on the splash screen

Hi all,
I am trying to flash another JB rom the other day.
I just turned off the Prime completely, and try to enter the recovery mode by holding power and down, then up within 5 seconds...
It then showed the Android laying down with the heart opened:silly:
I have to holding power to restart and boot normally into the rom.
I didn't do any wipe or flashing at all...
Later, I restart and now totally stuck on the splash screen with "ASUS", not even able to boot in to the rom I'm currently using...
Any help?!
Thanks
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Click to expand...
Click to collapse
Considering he says he got Dead Andy that makes it possible that he was on stock and just tried to use stock recovery to flash a custom ROM. I understand your point, the OP is just lacking details.
McJesus15 said:
We need more information. What ROM were you using before this happened, what ROM did you try to flash, and is your device unlocked?
Click to expand...
Click to collapse
Hi McJesus, before this happened, I was using this
http://forum.xda-developers.com/showthread.php?t=1911024
and I am trying to shift to shis one
http://forum.xda-developers.com/showthread.php?t=1982156
I was trying to enter the recovery mode to prepare wipe and flash procesure, I remember I used to use TWRP, but failed, it stopped at the "dead Android" icon, and I could get out only by restarting.
Then I researched and installed Goo and Rom manager, yet, just installed those, not done any flashing or wipe whatsoever.
Then start doing recovery mode, failed, normal boot, totally hanged, on the splash screen with "Asus"...I coudle restart with holding the power buttom though.
The device is unlocked.
Thanks for helping,
flumpster said:
He has to be unlocked otherwise he wouldn't have had a different rom on there or recovery before.
Hold down the power button and volume down button for 10 seconds, keep holding them until the screen with all the icons on it appear (recovery, wipe, usb icon etc) look up the top at the writing and at the end of the line with bootloader in it is a long number that starts with 9 or a 10. What number is it ?
Click to expand...
Click to collapse
I was able to get to the screen that you mentioned about...But after that I normal restarted and attempted entering recovery, totally failed and only made to the splash screen.:silly:
Thanks,
garykwan said:
I was able to get to the screen that you mentioned about...But after could normal restart and attepmted recovery entering, now totally failed but to the splash screen.:silly:
Thanks,
Click to expand...
Click to collapse
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
flumpster said:
It looks like you was on the Jellybean bootloader before.. I'm out and about at the moment but if someone hasn't helped you by later I will knock up some instructions for you to try.
Click to expand...
Click to collapse
Yes, I believed so.
Thank you so much for your kindly help.:good:

Bootloop to recovery issue.

Hi guys.
I seriously need help right now.
My friend bought an s2 i9100 in cheep which was stuck on bootloop and he thought it could be repaired.
so we don't know what caused the problem.
But i was surprised that few repair shops weren't able to fix it.
let me explain the problem:-
when we hold power button or plug in a charger it show the logo, goes into recovery and reboots repeating it in loop.
so whenever i charge it goes into this loop.
we can use volume up & down key in those 2-3 seconds in recovery but not the power key.
we can access download mode and it doesn't reboots automatically but going into recovery mode manually also start this loop.
it's like we are only going in recovery mode again & again.
i installed this file "I9100XWLPW_I9100ODDLPC_I9100DDLPB_HOME.tar.md5" through odin and also used the pit file "I9100_STOCK-System_2GB-Data_512MB-Preload.pit" but nothing changed.
i don't know what to do now.
i cant find any gingerbread rom to test.
i don't know how it can be fixed,
so please help me.
Update
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
BenjyTec said:
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
Click to expand...
Click to collapse
The problem is not about flashing it's about the bootloop & tell me can I flash cyanogenmod with Odin?
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
gsstudios said:
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
Click to expand...
Click to collapse
Actually the ROM you are talking about is the ROM which I flashed which is mentioned in my second post " update".
PDA = CODE_I9100XXLSJ.tar
PHONE = MODEM_I9100XXLS6.tar
CSC = CSC_HOME_OXX_I9100OXXLS1.tar.
That's how I got this far, previously it was impossible to boot into system.
kuro2052 said:
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
Click to expand...
Click to collapse
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
gsstudios said:
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
Click to expand...
Click to collapse
Wiping data/factory reset and cache doesn't solve the problem.
There is format option in 'mounts and storage' so I formated system, data, cache & also emmc. But the bootloop is not gone. The only thing that is gone is the ROM because of those formats. I have yet to to install the ROM again.
maybe is a faulty power button... Do u have to push it down a little harder than normal?
affigne said:
maybe is a faulty power button... Do u have to push it down a little harder than normal?
Click to expand...
Click to collapse
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
kuro2052 said:
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
Click to expand...
Click to collapse
Since I was on leaked JB firmware, what I did was to install philz recovery via android stock recovery, then install latest dorimanx isorec recovery/kernel, then install TWRP...
---------- Post added at 01:10 AM ---------- Previous post was at 01:09 AM ----------
kuro2052 said:
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
Click to expand...
Click to collapse
check the battery contacts...

SMG530H Cannot Update To Lollipop

Hey guys. I need a help. Im really appreciate if someone can solve this problem. I just update my phone to lollipop using OTA and im also try to update using odin but after the update was finish, a few minute later my phone just show a black screen and a few minute later after that it show a bootanimation. After that it start show a black screen again. I don't know how to do. Im already have a stock rom. Until now i cannot update my phone. Please help me guys.
Thank you and im so sorry for my bad english
Which Device are you currently using? Was your Device Rooted before the Update? Sounds like your Phone is soft bricked/endless bootloop.
Nanadaime said:
Hey guys. I need a help. Im really appreciate if someone can solve this problem. I just update my phone to lollipop using OTA and im also try to update using odin but after the update was finish, a few minute later my phone just show a black screen and a few minute later after that it show a bootanimation. After that it start show a black screen again. I don't know how to do. Im already have a stock rom. Until now i cannot update my phone. Please help me guys.
Thank you and im so sorry for my bad english
Click to expand...
Click to collapse
If you are able to enter in to the Recovery mode do wipe cache partition and reboot your device.
To enter in recovery mode make sure your device is off , then press all together Vol + & Home button and Power button for about 7 second , after you feel one vibration release Power button but keep holding Vol+ and Home button .
Good Luck
Otaku-San said:
Which Device are you currently using? Was your Device Rooted before the Update? Sounds like your Phone is soft bricked/endless bootloop.
Click to expand...
Click to collapse
Im already unroot my device before update. But it laso cannot update. I left my phone about 1 day and it still show a blackscreen
Teddy Lo said:
If you are able to enter in to the Recovery mode do wipe cache partition and reboot your device.
To enter in recovery mode make sure your device is off , then press all together Vol + & Home button and Power button for about 7 second , after you feel one vibration release Power button but keep holding Vol+ and Home button .
Good Luck
Click to expand...
Click to collapse
I can enter to recovery mode but after i do what you say it still same. Nothing change. Thanks for ur help.
Nanadaime said:
Im already unroot my device before update. But it laso cannot update. I left my phone about 1 day and it still show a blackscreen
Click to expand...
Click to collapse
You can try to flash another Firmware Version, maybe that will work

BootLoop

I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
afjohn483 said:
I have a Huawei Mate 10 Pro that is unlocked but won't install Lineage OS. I have tried using the Huawei Update Extractor and flashing ramdisk, recovery ramdisk, and system.img. I have flash Lineage OS several times. Now I am stuck on the "Your device is unlocked" screen with no action happening. If I hold Volume Up to enter the e-recovery, I am only present with three options, with only two doing anything which are working: Restart and Shutdown (this is the only way I can shut down the device). There is no wipe data option. I know I am running a BLA-L29 model and pretty sure it is the European model. I installed TWRP but getting to that screen is difficult as each time I hold a button combination (Volume Up + power button or Volume Down + power button), nothing happens (I do know it is installed as I have reach the screen several times on my device). Any suggestion? I would like to install Lineage but I would be fine returning to stock OS. I apologize for the redundancy of this thread (potentially) but I couldn't find the answer anywhere, and nothing specific to my situation.
Click to expand...
Click to collapse
May i know still problem in your mobile....
truthteller609 said:
May i know still problem in your mobile....
Click to expand...
Click to collapse
I was able to fix it. Had to reinstall the original software, then try again. Thank you
afjohn483 said:
I was able to fix it. Had to reinstall the original software, then try again. Thank you
Click to expand...
Click to collapse
Does your fast boot is workung
truthteller609 said:
Does your fast boot is workung
Click to expand...
Click to collapse
Yes
afjohn483 said:
Yes
Click to expand...
Click to collapse
Your getting bootloop
truthteller609 said:
Your getting bootloop
Click to expand...
Click to collapse
Everything fix now

Categories

Resources