Related
Hello!
I need some help and I know this is the place to find it!
I have searched for several days all over the internet trying to read and gather information, and I am coming up short.
I know Bruno Martins has posted some information on his blog on how to "readback" (backup) your current rom for your phone, but there is no information on how to flash the entire ROM package back to your phone (at least with regard to the errors you may receive).
Basically, I am looking for some help on how to backup one of my phones entire rom package and put it on my other phone that I messed up via the Smart Phone Flash Tool (the exact same model: Star Touch Diamond 2 B2000 MT6573).
The new phone works perfect, I have never touched it, my old phone which is the same model I deleted and formatted the system so I need to put the stock rom on.
I was able to do a "backup" of my new phone, but when i try to flash the preloader and uboot, etc, the sp flash tool says error loading file, or region too large with overlap.
Any help would be greatly appreciated!
By the way, my phone is not bricked, but I cannot access recovery! I was able to find and install another fully assembled rom to my phone and the phone does power on with lights, but it doesnt have the display driver I need so I cannot see anything.
The reason I flashed another rom was because the phone was essentially bricked and wouldnt do anything, and that was the only rom I could find on the internet that was a full package (preloader, uboot, system, etc) but isnt compatible with phone.
Anyhow, if I understand correctly I need to use hexadecimal calculator to find length of partitions of original phones rom, readback the files, somehow edit the preloader file? then flash them back to the old phone?
Please help!
I would love to make a tutorial of this method with pictures and possible errors for everyone if we could get this solved!
Please point me in the right direction!
And I wanted to thank BRUNO in advance for his hard work and help!!
have you tried the neutrino rom from notorious? its reallllly small around 50mb. you may be able to install that since it so small, then work your way back down? not too sure and i can say im no grandmaster but it might work!
***derp. neutrino... thats for atrix only. but hey same concept. maybe a small barebones rom will get you running enough to get things done properly.
Hello stokemonkey!
No, I have not tried the neutrino rom. My main goal is to take my working phone and copy the firmware to my other phone which is the same model. I attempted to flash a rom and then it didnt work out so well (phone still lights up, drivers are not compatible).
I all else fails I can attempt the neurtino rom (as long as you dont have to install from sd card zip file because I cannot!)
the neutrino is an Atrix 4G rom only, so you cant use it and it also needs to be installed via internal so its a no go either way. isnt your phone the china "htc" model? i dont have much user time on an htc so im not too sure what you can do?
again id try to find a barebones that you can flash the way you did with the rom that gave you errors. ill try to do some searching too and see what i can find. let me know if you get anything workin! and if there is someone else out there that can enlighten the both of us help would be appreciated!
and isnt yours like an evo 4g? maybe one of those roms will work?
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Anyone have any information? I have created a small visual representation of what I have been looking at and messing around with. Let me know!
Mt6573 phone flash help
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
CrimsonX said:
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
Click to expand...
Click to collapse
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Whistler011 said:
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
nsxtas said:
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
Click to expand...
Click to collapse
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
LeStonga said:
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
Click to expand...
Click to collapse
I'm using MTK6573 phone but could i know how do you start the "readback" using SP Flash. I'm not able to start it while holding VOL-UP button and connect the USB data cable into your phone. Are there any other methods to start it. Thanks for your help.
CM
Why don't you make a try with CyanogenMod?
LeStonga said:
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Click to expand...
Click to collapse
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
e-lime said:
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
Click to expand...
Click to collapse
If you have the correct files use the newest version:
http://forum.xda-developers.com/showthread.php?t=1982587
It is easy to mess things up if you try random files.
MTK 6577 and SP Flash Tool
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
DollarStrawz said:
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
Click to expand...
Click to collapse
Create personalized file scatter for your device with MTK Droid. Here: http://forum.xda-developers.com/showthread.php?t=2160490
[email protected] said:
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
Click to expand...
Click to collapse
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Alecupid said:
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Click to expand...
Click to collapse
hi, i've made a mistake.
I've installed an odex version from a modified recovery(with dalvick cache). Can anyone help me?
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Any pro. expert help you
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
My Suggestion is to take back to the Huawei service centre , might they help you !
Or any expert will help you here and get you out of trouble
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
SionGrey said:
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
Click to expand...
Click to collapse
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
danaber11 said:
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
Click to expand...
Click to collapse
have you try data wipe in recovery ?
if no so check and try wiping :good:
That was the first thing I tried.
Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex,
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app
So guys, I'm new to this and thought I would jump in at the deep end.
I unlocked my HTC One X+ easily and set about rooting.
I've got TWRP installed but it keeps telling me it needs to install superuser before it can root.
I have totally wiped the phone, how come if Im not rooted?
How do I get an OS and indeed the kernel or ROM onto the phone?
Its and International OX+, I've got the right kernel... what do I need to do?
It was locked to O2 if that makes a difference
I followed the instruction in Hasson but then wiped the OS
I know its a simple procedure but can someone walk me through it please
So I've downloaded Kernel 3.1.10-ge7581e4
I have no idea what to do next, come on guys I know its not difficult for you guys.
eskimosound said:
So I've downloaded Kernel 3.1.10-ge7581e4
I have no idea what to do next, come on guys I know its not difficult for you guys.
Click to expand...
Click to collapse
If you wiped as you said, you need to push with adb a rom of your choice to the internal memory of the phone and then install it within twrp.
Please read instructions 2 or 3 times before attempting anything, seems like you rushed and now you're temporarily without phone till you flash a rom on it again. I doubt any root guide tells you to wipe the phone, your own fault on this.
To sum it up:
Put a rom's zip of your choice in the internal memory with adb push
flash the rom within the twrp recovery (install option)
flash the kernel for the specific rom with fastboot (each rom has a guide and download for it)
You can now search about it more easily, plenty of posts and info about this.
dan_alexandre said:
If you wiped as you said, you need to push with adb a rom of your choice to the internal memory of the phone and then install it within twrp.
Please read instructions 2 or 3 times before attempting anything, seems like you rushed and now you're temporarily without phone till you flash a rom on it again. I doubt any root guide tells you to wipe the phone, your own fault on this.
To sum it up:
Put a rom's zip of your choice in the internal memory with adb push
flash the rom within the twrp recovery (install option)
flash the kernel for the specific rom with fastboot (each rom has a guide and download for it)
You can now search about it more easily, plenty of posts and info about this.
Click to expand...
Click to collapse
Thanks, I did indeed rush into it but I have been meaning to do it for a year and just thought go for it, I know its all salvageable..ish!
So yep, I've got the ROM I want but don't understand the kernel, I see no guide to download it, all I know is I took a note of the Kernel before I wiped my phone and I have managed to find the exact kernel.
The ROM or RUU as it is, is an O2 UK version, I figure it must be the one I want as it was an O2 phone in the UK.
I still don't know what folders to put things in, TWRP can't see a boot.img that I have on the phone when installing, it can only see it through file explorer.
And then, every time I power down the phone TWRP asks to install Superuser, its cant, theres nothing to install it to, so it just keeps asking.
This is all because I hated the Sense 5 update, indeed Im till looking for the Sense 4 ROM fo HOX+
eskimosound said:
Thanks, I did indeed rush into it but I have been meaning to do it for a year and just thought go for it, I know its all salvageable..ish!
So yep, I've got the ROM I want but don't understand the kernel, I see no guide to download it, all I know is I took a note of the Kernel before I wiped my phone and I have managed to find the exact kernel.
The ROM or RUU as it is, is an O2 UK version, I figure it must be the one I want as it was an O2 phone in the UK.
I still don't know what folders to put things in, TWRP can't see a boot.img that I have on the phone when installing, it can only see it through file explorer.
And then, every time I power down the phone TWRP asks to install Superuser, its cant, theres nothing to install it to, so it just keeps asking.
This is all because I hated the Sense 5 update, indeed Im till looking for the Sense 4 ROM fo HOX+
Click to expand...
Click to collapse
Sigh, if you had read carefully you'd know that boot.img need to be flashed through fastboot and not from recovery. Every rom has this info or a batch file for this.
So what exactly are you trying to do? Root the stock rom that came originally with the phone or installing a custom rom?
dan_alexandre said:
Sigh, if you had read carefully you'd know that boot.img need to be flashed through fastboot and not from recovery. Every rom has this info or a batch file for this.
So what exactly are you trying to do? Root the stock rom that came originally with the phone or installing a custom rom?
Click to expand...
Click to collapse
Lols, thanks dan, I hope you don't hate me!
Root the stock ROM
For starters..
The boot.img is the Android Revolution HD
The RUU is O2 UK
I do realise they are two different ways of installing an OS, I would just like one of them to work!
So think install RUU, then kernel
But put them where and how
I bought the Android Hackers book, but theres nothing about HOX+ in it, and seeing as that's the only phone, I've got to practise on I thought I would ask you specifically.
eskimosound said:
Lols, thanks dan, I hope you don't hate me!
Root the stock ROM
For starters..
The boot.img is the Android Revolution HD
The RUU is O2 UK
I do realise they are two different ways of installing an OS, I would just like one of them to work!
So think install RUU, then kernel
But put them where and how
I bought the Android Hackers book, but theres nothing about HOX+ in it, and seeing as that's the only phone, I've got to practise on I thought I would ask you specifically.
Click to expand...
Click to collapse
I see, the easiest ways would be to use a custom rom now. For example, the one you already got the kernel from(android revolution hd)
To root you dont need to install a kernel... just to flash the supersu zip. Using a custom rom's kernel with stock rom might not be a good idea.
Another simple way would be to restore stock rom back to start and try rooting again, this time reading everything carefully
So the two easiest ways i think:
1) flash a custom rom following the instructions they provide in the initial posts for that rom
2) run the o2 correspondent RUU to restore stock rom (you'd need to relock the bootloader), also reading carefully posts in the forum about restoring to stock
Without getting into too much detail, these are the simplest options.
All the info required to do these are on these forums
Aaarrghhh, its driving me insane as I knew it would, just like XP, Vista Seven and Eight!!!
So Im back to being up all night learning..
Well have installed SDK correctly but device is not seen, no serial, nothing.
I can get it to fastboot though, however I don't know any commands so I cant get it to work
Windows 7 keeps moaning about an mpt file which I downloaded and dont know where to extract it to
All I need to do is copy a few files to the phones sd card and install them right?
Whys that so difficult?
I don't know the difference between a rom an ruu and a boot image, in that I don't know where they should all be placed.
Why cant twrp copy and paste from pc...
So Hassooon works sort of but still none the wiser.
Am following tutorial but fastboot commands are not working
Still cant find right driver.....
So CMD lines not working 100%
So am downloading drivers in sdk manager
And how do I flash the supersu zip?
Still no luck with driver, im on windows 7 32bit
OK I cant push using adb it cant find the file or directory,
Hassooon cant detect the phone as cant windroid universal
I dont think the phone is rooted even though i have twrp on it.
Thus can I have wiped the os?
If not can i restore it?
No I didnt make a backup rom..
mmm a zip on the phone doesnt load in bootloader, count that be my os?
Guys, im stranded in the water here...
On boot im getting...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PM35IMG.zip image...
Failed to open usb master mode
please plug off usb
Whats PM35IMG.zip?
Is that the OS?
Am I saved?
Is it easy to get that file to unzip and load?
Can anyone help?
So now I need the right RUU.....
2.17.206.3
Is there anyone out there that can help please?
So have managed to install superuser and root my phone, all instructions for doing this were wrong including Hassoon, had to have the phone in System screen to do it, not bootloader or recovery.
Now cant get adb to push file to sdcard...
Man alive, how to make something very easy, sound very difficult.
Would any of you experts care to help?
Just trying to install a ROM.zip to Root and place the boot img in right place.
Well, the instructions are dire but after 10 days of persistance have installed Android Revolution HD 8, finally my phone is up and running better than the bloated os that came with the phone so, you can call this thread resolved.