hello
i have zopo zp600+ mtk6582
i tried to repartition it with "meteos mtk6589" yes my mistake
and now its stuk on startup screen animation
i tried wit cwm to reinstall back up but still stuck
i try with sp flash tools and mtk flash tool to flash the original rom
but i get : "Error: Initialize scatter file failed. Please check the scatter file name you load is legal"
try with :sp flash tools v3.1344 v3.1250 v3.1304
and mtk flash tools v5.1352 v5.1343
can someone please help me
SP FLASH
please help me
working
finaly i found a version thats working!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SP_Flash_Tool_v5.1348.00 working !!!!!
for your information
Related
Hello i got myself a soft-brick on mine Coolpad 7320. And i would un-brick it with no problem, only - i got no backup done i SP Flash Tools, and so far iv read its the only backup that can restore my phone from the dead
So mine question is
- Can i restore a soft-brick (phone responds to SP Flash Tool) Noth having a Backup done in SP Flash Tool ?
- IF no, can some of u folks do a backup of a clean install of any ROM on Coolpad 7320 ?
- Myby i can use a Scatter file (got one to Coolpad 7320) to Flash in SP flash Tool any ROM's from other devices ? (done so with Jayui G$S and fails)
I have tried to:
- Flash CWM backup with SP Tools (but it got no preloader and the Android extension is wrong)
- I got myslew a scatter file from 7320, and i tried to fill the files need for SP Flashing from other roms with similar prcessor (like Jayiu G4S) but fail
I will be very gratefull for help !
PS attaching mine scatter file from 7320 - myby it will help
update
I did read some more tutorials - as said i need:
Backup of the ROM done with SP Flash Tool - if anyone could send me this - i would call him King !!
SMS
Hey, I have the same phone and I have problems with sms of banks, phone doesnt take sms from banks and I cant login to my online banking. Are you facing with the same problems like me, or do you know how to solve this.
Thanks in advance.
Sp backup is available on a Russian forum 4pda. You can download it from there.
Found any solution
Did u find any solution my phone is dead too, i need help
Hi All
can someone please help me with a step by step instructions on how to use the smart phone flash tool to restore an earlier firmware.
i have the firmware but cant seem to find the scatter file, what i though was the scatter file isnt it.
Thanks
Dear all,
I have flashed the wrong stock rom on my tablet (lenovo). Now i have the right stock rom, but when i use SP tool to flash i get the error "Chip type not match. Target chip is MT6580. load scatter chip is MT6582."
First i flashed stock rom Lenovo tab 3 710I, i tried to boot, but i got only a black screen with vibrating every 2-3 seconds. Then i knew the right model for the device, which is lenovo tab 2 A7-30HC , so i tried to flash it but i got the "chip type not match" error.
could you please help me solve this problem?
best regards,
Format the device with wrong scatter file and after that load orginal one and try
also try flashing recovery (if avilable ) via adb
Trex2017 said:
Format the device with wrong scatter file and after that load orginal one and try
also try flashing recovery (if avilable ) via adb
Click to expand...
Click to collapse
good idea.format the device and then re flash the correct firmware.
Also have the same error
I also have the same thing going on. except that i haven't flashed the device yet. I have an AG Boost Dual SIM. I downloaded the ROM from firmwarefile[dot]com but the chip type of the phone is MT6572 While the scatter of the ROM has MT6580. Should i look for another ROM or is there some kind of hacks and back doors to flash the same ROM?
how to format with wrong scatter?
I am using hp 7 voicetab (MT8382)
I tried official update.zip but it says "system properties doesn't match"(I edited the build.prop previously in tab)
I also tried sp flash tool but the scatter file for MT8382 is not working...
Plzz help me...
I am trying to erase the flash partitions (system, boot, recovery) via fastboot but it needs bootloader unlocked i don't know how to do that!!?
Plzz help me i asked in many place and to many peoples plzzz understand my situation and help me...
Hi everyone. I ask you something ¿is there any way to flash a samsung stock firmware on brom mode (not in download mode, but brom mode)? If there is, ¿How can i do that? Thanks
Model SM-.....
is that samsung use mediatek? if so, find full dump firmware for your model and flash it using sp flash tool, you need bypass brom authentication first in order to flash
SM-A146U, processor MT6833
cuynu said:
is that samsung use mediatek? if so, find full dump firmware for your model and flash it using sp flash tool, you need bypass brom authentication first in order to flash
Click to expand...
Click to collapse
I tried already with sp flash tool, I know about bypass brom authentication; but I what I don't have is a reliable scatter firmware. I tried to convert any of the samsung roms I downloaded, into a scatter one, by using Android utility, but the generated scatter is useless, so i don't know if all the rest of "converted" files are reliable too.
Camilo Gil said:
I tried already with sp flash tool, I know about bypass brom authentication; but I what I don't have is a reliable scatter firmware. I tried to convert any of the samsung roms I downloaded, into a scatter one, by using Android utility, but the generated scatter is useless, so i don't know if all the rest of "converted" files are reliable too.
Click to expand...
Click to collapse
Can you send a picture of the download mode
windows4droid said:
Can you send a picture of the download mode
Click to expand...
Click to collapse
Sir, that's exactly the problem: There's no download mode. It's stuck on boot rom mode, so the phone it's just recognized as mtk device.
So, I tried to find a firmware scatter version for this phone, but besides what is a relatively new model, its storage is UFS, so any EMMC scatter file is useless, at least on sp flash tool. Someone has said me, I can flash it with unlocktool, but i'm broke and I cannot afford that program (and obviously if the phone is stuck in that mode, odin doesn't work).