Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
rstalker said:
Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
Click to expand...
Click to collapse
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
THANK YOU! :highfive::highfive::highfive::highfive::highfive::highfive:
LOVE YOU MAN
PMT Corrupted & Format-all done
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
iZLeeP said:
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
Click to expand...
Click to collapse
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
HNaseer said:
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
Click to expand...
Click to collapse
Let me remind people, the first order of business must be to have a full firmware backup from the phone manufacturer or thru MTK Droid Root & Tools. Reading that you tried to resize your system & data partition, your cwm backup should not be affected by it. Try restoring to default the partition sizes using the app/script you used to resize. It should have that function. Then flash custom recovery and root and see if it works.
phone booting to main-screen or not?
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
spandrd said:
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
Click to expand...
Click to collapse
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Incredible.
Thank you so much. HAd almost given up hope...
How to connect mtk6582device (spice dream uno) in meta mode
Plz help me out guys ??????
I have a similar issue with my Unite 2 phone. I tried the format option too but I am getting STORAGE_ERROR
[Storage Error] The load and the target are inconsistent!
A Hint message is also there :
The load to be downloaded is for EMMC.
The Target storage is .
Please select a correct load according to the storage.
Please help me in resolving this issue. My phone model is Micromac unite 2 A106 8GB model.
syserr said:
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Click to expand...
Click to collapse
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
---------- Post added at 01:24 AM ---------- Previous post was at 12:26 AM ----------
hello guys
how can i format my device Blu studio energy 2 with sp flash tool my phone is dead after i do the format and i dont have firmware back up
thank you
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
syserr said:
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Omarod said:
syserr said:
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Try google, or search xda, or needrom.com...
This may or may not help you. If I were you I would use SPFT right now to try to backup your NVRAM partition if it's not too late. Your FORMAT may have wiped the NVRAM partition already. If it has wiped it, your only good path is to find someone willing to give you their NVRAM partition. Then somehow insert your own IMEI and WIFI MAC in and pray.
Click to expand...
Click to collapse
Could you tell me step by step what can I do coz I'm new in sp flash tool and. Mtk droid root and flash tool
Thank you so much
First find proper ROM on www.needrom.com
Hello Guys
still waiting for help please
Blu Studio Energy 2 -Backup file- firmware Please
hello
i have zopo zp600+ mtk6582
i tried to repartition it with "meteos mtk6589" yes my mistake
and now its stuk on startup screen animation
i tried wit cwm to reinstall back up but still stuck
i try with sp flash tools and mtk flash tool to flash the original rom
but i get : "Error: Initialize scatter file failed. Please check the scatter file name you load is legal"
try with :sp flash tools v3.1344 v3.1250 v3.1304
and mtk flash tools v5.1352 v5.1343
can someone please help me
SP FLASH
please help me
working
finaly i found a version thats working!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SP_Flash_Tool_v5.1348.00 working !!!!!
for your information
Hello,
I have GEOTEL G1 "Terminator" phone
I tryed different methods to root the phone
I tryed 1 click root apps but nothing, i tryed the same apps in pc version but nothing
I cant find twrp / cwm for this phone
I read about making twrp / cwm from the base recovery.img + scatter file, but i have no idea
If you need details, files, etc tell me
A lot of thanks!!
Sorry my bad english...
rolexio888 said:
Hello,
I have GEOTEL G1 "Terminator" phone
I tryed different methods to root the phone
I tryed 1 click root apps but nothing, i tryed the same apps in pc version but nothing
I cant find twrp / cwm for this phone
I read about making twrp / cwm from the base recovery.img + scatter file, but i have no idea
If you need details, files, etc tell me
A lot of thanks!!
Sorry my bad english...
Click to expand...
Click to collapse
I auto-reply me xD
I was trying adb&fastboot methods
1. Bootloader unlock (fastboot oem unlock) ---> this works and bootloader was unlocked
2. Flash recovery from other phones with the same SOC (Mediatek MT6580A) ---> i still with stock recovery, nothing happens. I tried fastboot boot recovery.img and fastboot flash recovery recovery.img
Any suggestion is welcome
install magisk manager to your phone, download firmware and extract boot.img from it.
patch boot.img with magisk manager, the new patched_boot.img has to be flashed to the phone with sp flash tools in "download mode".
Mine is rooted with this method, but I didn't manage to build twrp for this device.
HI , I have a question about this phone ,
its have led indicator ?
if You miss a call , msg , email etc... led is blinking ?
I need help urgently. I have a p20 lite ane-lx2 that had an update and got bricked. I tried the dload methot on my SD card but no luck keeps on telling me fail to do update. I have tried all the stuff on this forum with no sucsess.. Please please help my battery also does not charge the phone anymore since this happen.. I have read some stuff around that it can be done by adb tool. But I'm a noob.. I please need help I have taken it in to suppliers but they say they can't do anything.. I can boot up into download mode but goed to 5 persent then reboots.. Can go to recovery mode byt phone and frp is locked. And if I boot normally it just gets stuck to system apdate fail and error codes.. Please help
This answer have 2 solutions
1 st solution - using SP flash tool
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
flash stock ROM via SP flash tool
https://flashingguide.com/huawei/how-to-flash-huawei-p20-lite/
---------------------------------------------------------------------------
2 nd solution - using fastboot (adb, terminal, manual, harder, but less likely can go wrong if you follow steps)
https://unofficialtwrp.com/huawei-p20-lite-root-twrp/
just skip step of rooting.
but you need unlocked bootloader:
https://unofficialtwrp.com/how-to-unlock-bootloader-on-huawei-phone-2019-working/
when you flash twrp you need to flash stock ROM via TWRP recovery
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
open TWRP recovery and transfer downloaded stock ROM in phone and flash via TWRP
https://www.theandroidsoul.com/how-to-install-a-custom-rom-using-twrp-recovery/
and it should do just fine
--------------------
sorry if answer look too hard to understand, just follow instructions on links and my answer how to do it, and it will work
Hey people, so I wanted to unbrick my phone by formating the data so I went all smarty pants and used SP Flash Tool and formated the whole flash except for the bootloader. Now I get an error message when I boot saying "Download not completed!" with the error code 0x99256658 after I flashed the whole stock rom (B.53). Did SP Flash Tool get rid of something extra? Or is the rom maybe missing something? Can anyone please help me unbrick it? That would be very nice. Thanks for reading
I found a solution. I need an oppo_custom.img for the realme 6. Can someone tell me where I can get it please?
EDIT: Nevermind I found it in the ROM files and I flashed it but I'm still getting the same error. Anyone any idea?
EDIT2: Somehow flashing OPPO F9's oppo_custom.img gets me to recovery but it doesn't load the OS