Hello Dear N2 User this my Build.prop tweaks just choose what you want then copy/paste on ur Build.prop then reboot
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Enable GPU Acceleration
debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# Battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=15
mot.proximity.delay=15
ro.ril.enable.amr.wideband=1
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
persist.sys.use_dithering=1
UPDATE..
Build.prop : Universal flashed zip for any rom & any base just put it in ur SD card & flashed before reboot do a wipe cache & dalvik please
Special thanks @KNIGHT97
https://mega.co.nz/#!oIh0EKJT!3iuSmK-SWYeu-STVQAr5Wfvi-AEY0prlnsxcWmcewLE
Good!
Thank you very much, I used all of the above tweaks and it's making a good difference so far.
Hello,
thanks for sharing, but wouldn't that make some conflicts with current default values of build.prob values ?
futchy4u said:
Hello,
thanks for sharing, but wouldn't that make some conflicts with current default values of build.prob values ?
Click to expand...
Click to collapse
What rom u use ??
God Please Help Lebanon
Can i use for phoenix rom 18.8
Sent from my GT-N7100 using Tapatalk
revanthina said:
Can i use for phoenix rom 18.8
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Sure u can
God Please Help Lebanon
very nice job
I must to paste at the end of build.prop?
Inviato dal mio SM-G900F utilizzando Tapatalk
REVERENDO75 said:
I must to paste at the end of build.prop?
Inviato dal mio SM-G900F utilizzando Tapatalk
Click to expand...
Click to collapse
Yes sure bro
God Please Help Lebanon
Great job! Improved performance.
Sent from my GT-N7100 using xda premium
Can I use it on DN3 V5?
Bhupen Gaitonde said:
Can I use it on DN3 V5?
Click to expand...
Click to collapse
Yes you can.
Great job thereassaad........
I used all of the your tweaks to and so far make positive difference and good performance to.....
With Dn3 5.2 + Agni v.4.2.4
Great job mate. Really helpful for everyone, I'll add it to my sticky thread so all can have a lot at it whenever needed
Sent from my RPG with auto targeting
Good!:good::good:
Line 1.
Code:
# Rendering Tweaks
Line 270.
Code:
persist.sys.use_dithering=1
There's 41 duplicate lines.
Code:
(Line 20 was a duplicate of line 8.) debug.sf.hw
(Line 21 was a duplicate of line 17.) video.accelerate.hw
(Line 22 was a duplicate of line 7.) debug.performance.tuning
(Line 23 was a duplicate of line 15.) persist.sys.composition.type
(Line 26 was a duplicate of line 6.) debug.qctwa.preservebuf
(Line 28 was a duplicate of line 3.) debug.egl.hw
(Line 29 was a duplicate of line 2.) debug.composition.type
(Line 30 was a duplicate of line 10.) hw3d.force
(Line 42 was a duplicate of line 14.) ro.vold.umsdirtyratio
(Line 45 was a duplicate of line 39.) pm.sleep_mode
(Line 46 was a duplicate of line 41.) ro.ril.disable.power.collapse
(Line 65 was a duplicate of line 54.) ro.config.hw_fast_dormancy
(Line 83 was a duplicate of line 7.) debug.performance.tuning
(Line 87 was a duplicate of line 32.) persist.sys.use_16bpp_alpha
(Line 88 was a duplicate of line 31.) ro.product.gpu.driver
(Line 102 was a duplicate of line 89.) ro.min.fling_velocity
(Line 106 was a duplicate of line 80.) persist.service.lgospd.enable
(Line 107 was a duplicate of line 79.) persist.service.pcsync.enable
(Line 127 was a duplicate of line 114.) ro.media.enc.hprof.vid.fps
(Line 133 was a duplicate of line 94.) ro.ril.enable.amr.wideband
(Line 140 was a duplicate of line 75.) dalvik.vm.dexopt-flags
(Line 144 was a duplicate of line 124.) ro.media.panorama.defres
(Line 145 was a duplicate of line 125.) ro.media.panorama.frameres
(Line 146 was a duplicate of line 126.) ro.camcorder.videoModes
(Line 156 was a duplicate of line 47.) profiler.force_disable_err_rpt
(Line 157 was a duplicate of line 48.) profiler.force_disable_ulog
(Line 171 was a duplicate of line 72.) persist.sys.purgeable_assets
(Line 172 was a duplicate of line 75.) dalvik.vm.dexopt-flags
(Line 173 was a duplicate of line 53.) ro.mot.eri.losalert.delay
(Line 201 was a duplicate of line 109.) ro.ril.enable.a53
(Line 206 was a duplicate of line 200.) ro.ril.hsdpa.category
(Line 207 was a duplicate of line 108.) ro.ril.enable.a52
(Line 210 was a duplicate of line 54.) ro.config.hw_fast_dormancy
(Line 254 was a duplicate of line 38.) wifi.supplicant_scan_interval
(Line 257 was a duplicate of line 17.) video.accelerate.hw
(Line 258 was a duplicate of line 8.) debug.sf.hw
(Line 259 was a duplicate of line 7.) debug.performance.tuning
(Line 260 was a duplicate of line 27.) debug.egl.profiler
(Line 261 was a duplicate of line 3.) debug.egl.hw
(Line 262 was a duplicate of line 2.) debug.composition.type
(Line 270 was a duplicate of line 170.) persist.sys.use_dithering
There's 8 contradicting lines.
Code:
(Line 2 contradicts lines 29 and 262.) debug.composition.type
(Line 140 contradicts lines 75 and 172.) dalvik.vm.dexopt-flags
(Line 201 contradicts line 109.) ro.ril.enable.a53
(Line 254 contradicts line 38.) wifi.supplicant_scan_interval
(Line 23 contradicts line 15.) persist.sys.composition.type
(Line 270 contradicts line 170.) persist.sys.use_dithering
The duplicates are easily removed but what do we do about contradictions?
KrlzGmz said:
Line 1.
Code:
# Rendering Tweaks
Line 270.
Code:
persist.sys.use_dithering=1
There's 41 duplicate lines.
Code:
(Line 20 was a duplicate of line 8.) debug.sf.hw
(Line 21 was a duplicate of line 17.) video.accelerate.hw
(Line 22 was a duplicate of line 7.) debug.performance.tuning
(Line 23 was a duplicate of line 15.) persist.sys.composition.type
(Line 26 was a duplicate of line 6.) debug.qctwa.preservebuf
(Line 28 was a duplicate of line 3.) debug.egl.hw
(Line 29 was a duplicate of line 2.) debug.composition.type
(Line 30 was a duplicate of line 10.) hw3d.force
(Line 42 was a duplicate of line 14.) ro.vold.umsdirtyratio
(Line 45 was a duplicate of line 39.) pm.sleep_mode
(Line 46 was a duplicate of line 41.) ro.ril.disable.power.collapse
(Line 65 was a duplicate of line 54.) ro.config.hw_fast_dormancy
(Line 83 was a duplicate of line 7.) debug.performance.tuning
(Line 87 was a duplicate of line 32.) persist.sys.use_16bpp_alpha
(Line 88 was a duplicate of line 31.) ro.product.gpu.driver
(Line 102 was a duplicate of line 89.) ro.min.fling_velocity
(Line 106 was a duplicate of line 80.) persist.service.lgospd.enable
(Line 107 was a duplicate of line 79.) persist.service.pcsync.enable
(Line 127 was a duplicate of line 114.) ro.media.enc.hprof.vid.fps
(Line 133 was a duplicate of line 94.) ro.ril.enable.amr.wideband
(Line 140 was a duplicate of line 75.) dalvik.vm.dexopt-flags
(Line 144 was a duplicate of line 124.) ro.media.panorama.defres
(Line 145 was a duplicate of line 125.) ro.media.panorama.frameres
(Line 146 was a duplicate of line 126.) ro.camcorder.videoModes
(Line 156 was a duplicate of line 47.) profiler.force_disable_err_rpt
(Line 157 was a duplicate of line 48.) profiler.force_disable_ulog
(Line 171 was a duplicate of line 72.) persist.sys.purgeable_assets
(Line 172 was a duplicate of line 75.) dalvik.vm.dexopt-flags
(Line 173 was a duplicate of line 53.) ro.mot.eri.losalert.delay
(Line 201 was a duplicate of line 109.) ro.ril.enable.a53
(Line 206 was a duplicate of line 200.) ro.ril.hsdpa.category
(Line 207 was a duplicate of line 108.) ro.ril.enable.a52
(Line 210 was a duplicate of line 54.) ro.config.hw_fast_dormancy
(Line 254 was a duplicate of line 38.) wifi.supplicant_scan_interval
(Line 257 was a duplicate of line 17.) video.accelerate.hw
(Line 258 was a duplicate of line 8.) debug.sf.hw
(Line 259 was a duplicate of line 7.) debug.performance.tuning
(Line 260 was a duplicate of line 27.) debug.egl.profiler
(Line 261 was a duplicate of line 3.) debug.egl.hw
(Line 262 was a duplicate of line 2.) debug.composition.type
(Line 270 was a duplicate of line 170.) persist.sys.use_dithering
There's 8 contradicting lines.
Code:
(Line 2 contradicts lines 29 and 262.) debug.composition.type
(Line 140 contradicts lines 75 and 172.) dalvik.vm.dexopt-flags
(Line 201 contradicts line 109.) ro.ril.enable.a53
(Line 254 contradicts line 38.) wifi.supplicant_scan_interval
(Line 23 contradicts line 15.) persist.sys.composition.type
(Line 270 contradicts line 170.) persist.sys.use_dithering
The duplicates are easily removed but what do we do about contradictions?
Click to expand...
Click to collapse
its simply if dont want just deleted ok btw as I told on OP copy/paste what u want if u have something with some lines dont copy it ...
Sent from my SM-G900F using Tapatalk
Calendar stopped after place I cant create events how to resolve?
Inviato dal mio SM-G900F utilizzando Tapatalk
REVERENDO75 said:
Calendar stopped after place I cant create events how to resolve?
Inviato dal mio SM-G900F utilizzando Tapatalk
Click to expand...
Click to collapse
Delete what u post ..
Sent from my SM-G900F using Tapatalk
Related
Hello all from research and test o my rom dev discovered this and want share it with all can help ^^
The following lines in the build.prop file can be added and edited to change several properties in your device:
Warning USE only unix formatting compatible editors like Notepad++
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 240
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
video.accelerate.hw=1 or 0
Whether to use hardware acceleration to render videos, doesn’t work on all devices
Click to expand...
Click to collapse
Nice work mate Will help new developers greatly Keep it up
Ps; Make sure to mention on your thread to use only unix formatting compatible editors like Notepad++ and not WordPad ;D
Cheers
Part II
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.purgeable_assets=1
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode = hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=1
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
# Wireless Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
# Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
# Website Bypass
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# Graphics Enhancement
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=120
persist.cust.tel.eons=1
# Power Saving Tweaks
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
# Performance---> gpu cpu tunning
debug.composition.type=gpu
debug.composition.type=cpu
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Debug.performance.tuning=1
debug.egl.profiler=1
debug.egl.hw=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.min_pointer_dur=8
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
persist.sys.purgeable_assets=0
persist.sys.use_dithering=0
ro.secure=0
ro.min_pointer_dur=1
# Sound---> sound quality
af.resampler.quality=255
af.resample=48000
# Hwui----> hardwae ui cache
ro.hwui.text_cache_width=2048
Click to expand...
Click to collapse
Brilliant!!
you can aply him
1. With a root explorer(I prefer ES file explorer), copy /system/build.prop to the root of the internal sdcard (/mnt/sdcard).
2. Connect phone to computer and copy the file on your computer.
3. With Notepad++, open build.prop and edit it. Be careful as some of the parameters already exist. Just change their values.
4. Save and copy the file back to your phone's root.
5. Overwrite /system/build.prop with the edited file.
6. Make sure that the permissions are still rw-r--r--:
7. Reboot into recovery and wipe cache and dalvik cache.
8. New values should be applied now.
9. Enjoy
Click to expand...
Click to collapse
and you can mix this with some other solution like this ---->
Optimize Tool Box 15 powerful functions
Click to expand...
Click to collapse
How to add more language support ?
yes you can add more language to your android device how to make this ?
1- download needed language you can use any (font) from any rom you need
2- flash it with CWM or copie him with root tool like root explorer
3- go into build.prop and find this line
Code:
#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=EN_FR_XXXXXXXX
just add "#" like this
Code:
#Default values/Locales for the hiding languages feature
#ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
Click to expand...
Click to collapse
that all here result when you reboot
Hi DEV ....
I once asked my friend on android forums.
How to improve the performance of SGYD?
He replied, "Open build.prop and enter this code at the bottom!"
---------------------------------------------------------------------
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.mediatek.gemini_support=true
# VM Heapsize; 512MB RAM = 48 is better
dalvik.vm.startheapsize=8m
dalvik.vm.heapsize=48m
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:fast
ro.secure=0
ro.ext4fs=1
#LCD Dentisy
#ro.sf.lcd_density=240
# Render UI with GPU
debug.sf.hw=1
# Decrease dialing out delay
ro.telephony.call_ring.delay=5
# Helps scrolling responsiveness
windowsmgr.max_events_per_sec=86
# Save battery
wifi.supplicant_scan_interval=360
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Disable debugging notify icon on statusbar
persist.adb.notify=0
# Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
# Photo and video recording quality tweak (2.3 Rom only)
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Increase camera & video quality
#ro.media.capture.maxres8m
#ro.media.capture.fast.fps=4
#ro.media.capture.slow.fps=120
#ro.media.capture.flash=led
#ro.media.capture.flashMinV=3300000
#ro.media.capture.torchIntensity=0
#ro.media.capture.flashIntensity=0
#ro.media.panorama.defres=7728x5368
#ro.media.panorama.frameres=1280x720
#ro.camcorder.videoModes=true
# Enable Stagefright helps stream Video and Music Faster
ro.config.srs.equalizer=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=false
# Disable blackscreen issue after a call
ro.lge.proximity.delay=125
mot.proximity.delay=125
# Fix some application issues
ro.kernel.android.checkjni=0
# Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
ro.config.hw_menu_unlockscreen=false
#ro.mot.eri.losalert.delay=1000
# Force button lights on when screen is on
ro.mot.buttonlight.timeout=1
# Enable display Dithering
persist.sys.use_dithering=0
# Enable purgeable assets
persist.sys.purgeable_assets=1
#Disable boot animation for faster boot
#debug.sf.nobootanimation=1
#persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
debug.composition.type=hdp::fast
--------------------------------------------------------------
If I input this code. What changes will naturally my device?
Please explain!
Thank you.
wawan999 said:
Hi DEV ....
I once asked my friend on android forums.
How to improve the performance of SGYD?
He replied, "Open build.prop and enter this code at the bottom!"
---------------------------------------------------------------------
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.mediatek.gemini_support=true
# VM Heapsize; 512MB RAM = 48 is better
dalvik.vm.startheapsize=8m
dalvik.vm.heapsize=48m
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:fast
ro.secure=0
ro.ext4fs=1
#LCD Dentisy
#ro.sf.lcd_density=240
# Render UI with GPU
debug.sf.hw=1
# Decrease dialing out delay
ro.telephony.call_ring.delay=5
# Helps scrolling responsiveness
windowsmgr.max_events_per_sec=86
# Save battery
wifi.supplicant_scan_interval=360
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
# Disable debugging notify icon on statusbar
persist.adb.notify=0
# Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
# Photo and video recording quality tweak (2.3 Rom only)
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Increase camera & video quality
#ro.media.capture.maxres8m
#ro.media.capture.fast.fps=4
#ro.media.capture.slow.fps=120
#ro.media.capture.flash=led
#ro.media.capture.flashMinV=3300000
#ro.media.capture.torchIntensity=0
#ro.media.capture.flashIntensity=0
#ro.media.panorama.defres=7728x5368
#ro.media.panorama.frameres=1280x720
#ro.camcorder.videoModes=true
# Enable Stagefright helps stream Video and Music Faster
ro.config.srs.equalizer=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=false
# Disable blackscreen issue after a call
ro.lge.proximity.delay=125
mot.proximity.delay=125
# Fix some application issues
ro.kernel.android.checkjni=0
# Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
ro.config.hw_menu_unlockscreen=false
#ro.mot.eri.losalert.delay=1000
# Force button lights on when screen is on
ro.mot.buttonlight.timeout=1
# Enable display Dithering
persist.sys.use_dithering=0
# Enable purgeable assets
persist.sys.purgeable_assets=1
#Disable boot animation for faster boot
#debug.sf.nobootanimation=1
#persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
debug.composition.type=hdp::fast
--------------------------------------------------------------
If I input this code. What changes will naturally my device?
Please explain!
Thank you.
Click to expand...
Click to collapse
Next to every # is the explanation of the tweak. The next line is what you actually cut and paste into build.prop. For instance:
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.mediatek.gemini_support=true
raises your pic quality to 100% and so forth. The code you put into build.prop starts at ro and ends after true. Hope that helps, and always do a back up before playing around with build.prop! Enjoy
Sent from my SPH-D710BST using xda premium
jdsingle76 said:
Next to every # is the explanation of the tweak. The next line is what you actually cut and paste into build.prop. For instance:
# Raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.mediatek.gemini_support=true
raises your pic quality to 100% and so forth. The code you put into build.prop starts at ro and ends after true. Hope that helps, and always do a back up before playing around with build.prop! Enjoy
Sent from my SPH-D710BST using xda premium
Click to expand...
Click to collapse
Thanks, DEV. :good:
Render UI with GPU
What about this code?
# Render UI with GPU
debug.sf.hw = 1
for what? :good:
wawan999 said:
What about this code?
# Render UI with GPU
debug.sf.hw = 1
for what? :good:
Click to expand...
Click to collapse
the full name is Debug SurfaceFlinger HardWare it means so far as i know hardware acceleration for android apps and games
if you enter this on gingerbread then nothing wil happen cause there is no in gingerbread
wulsic said:
the full name is Debug SurfaceFlinger HardWare it means so far as i know hardware acceleration for android apps and games
if you enter this on gingerbread then nothing wil happen cause there is no in gingerbread
Click to expand...
Click to collapse
What code should I delete? sir ...
Sorry, Noob ...
What the hell is "hdp::fast"?
wawan999 said:
debug.composition.type=hdp::fast
Click to expand...
Click to collapse
Do check Jeffmixon.com's post about build.prop myths (sorry I lack permissions for URLs, search "examining-build-prop-tweaks-for-android-ics-a-comprehensive-guide")
wawan999 said:
What code should I delete? sir ...
Sorry, Noob ...
Click to expand...
Click to collapse
All script after "ADD...." can be delete,DEV
Before releasing a new ROM that I have been working on I thought I would share the build.prop file that it uses. I felt that it might generate some useful discussion. If that discussion leads to problems fixed or performance gained (in any ROM) then that would be splendid.
It is likely that many of the settings in fact do nothing -- it is really not practical to test them all. I am, however, concerned about settings that users feel introduce problems and/or degrade performance.
I tried to make it human readable, however that comes at the cost of easy diffing with your current file.
Code:
# (_) (_)(_) ____
# (_)___(_) _ _ _ (____)
# (_______)(_)(_) (_)(_)_(_)
# (_) (_)(_)(_)_(_)(__)__
# (_) (_)(_) (_) (____)
DEVICE_PROVISIONED=1
# build settings
ro.build.id=HMJ15
ro.build.display.id=HMJ15
ro.build.version.incremental=218994.1
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=六 12月 3 07:12:41 CST 2011
ro.build.date.utc=1322867561
ro.build.type=user
ro.build.user=finniest
ro.build.host=ABM010
ro.build.tags=release-keys
# product settings
ro.product.model=HTC PucciniLte
ro.product.brand=cingular_us
ro.product.name=htc_puccinilte
ro.product.device=puccinilte
ro.product.board=verdilte
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.product.version=Hive I ROM
ro.product.processor=Dual 1.5 GHz
ro.product.ram=1 GB
ro.product.display_resolution=10.1 inch WXGA (1280x800)
ro.product.main_camera=8 M
ro.product.front_camera=1.3 M
ro.product.wifi=802.11 a/b/g/n
ro.product.bluetooth=3.0
# board settings
ro.board.platform=msm8660
ro.build.product=puccinilte
ro.build.description=1.30.502.1 CL218994 release-keys
ro.build.changelist=218994
ro.build.fingerprint=cingular_us/htc_puccinilte/puccinilte:3.1/HMJ15/218994.1:user/release-keys
ro.build.characteristics=default tablet tablet
ro.build.project=Puccini_LTE:229055
ro.build.languageremove=0
ro.build.sense.version=2.1
# rild settings
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
#rild.libpath=/system/lib/libhtc_ril.so
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
# ril settings
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.ril.radio.svn=6
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.enable.sim.hot.swap=1
ro.ril.set.mtusize=1410
ro.ril.disable.cpc=1
ro.ril.enable.dtm=0
ro.ril.fast.dormancy.rule=1
ro.ril.att.feature=1
ro.ril.def.agps.mode=2
ro.ril.sensor.sleep.control=1
ro.ril.disable.power.collapse=0
ro.ril.enable.prl.recognition=1
ro.ril.reject.cs.ss.enabled=0
ro.ril.reject.mo.sms.enabled=0
ro.ril.reject.mo.ussd.enabled=0
ro.baseband.arch=msm
# aa settings
ro.aa.romver=1.30.502.1
ro.aa.skulist=502
ro.aa.customizationid=262057
ro.aa.mainsku=502
ro.aa.taskid=229055
ro.aa.maincid=CWS__001
ro.aa.modelid=PG0941000
ro.aa.project=Puccini_LTE
ro.aa.cidlist=CWS__001
ro.aa.rid=235
# cne settings
persist.cne.UseCne=0
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=0
persist.cne.snsr.based.rat.mgt=0
persist.cne.bat.based.rat.mgt=0
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
# data settings
ro.config.lte=1
ro.use_data_netmgrd=1
persist.data_netmgrd_nint=11
telephony.lteOnGsmDevice=1
ro.config.svdo=1
ro.ril.set.mtu1472=1
# telephony settings
ro.phone.function=1
ro.telephony.default_network=0
#ro.telephony.default_network=9
ro.telephony.ril_class=HTCQualcommRIL
ro.telephony.call_ring.delay=0
ro.phone_storage=0
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
# wifi settings
wifi.interface=eth0
wifi.supplicant_scan_interval=120
ro.wifi.channels=
# brcm settings
service.brcm.bt.activation=0
service.brcm.bt.srv_active=0
service.brcm.bt.hcid_active=0
service.brcm.bt.btld=0
service.brcm.bt.btld_pid=0
service.brcm.bt.bluetoothd_pid=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.ag_supported=1
# bluetooth settings
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.version=Bluetooth 2.1 + EDR
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.bt.profiles=4270403
net.bt.name=HIVEBOX
# audio settings
htc.audio.alt.enable=1
htc.audio.hac.enable=0
# qualcomm settings
com.qc.hardware=1
debug.qc.hardware=1
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
ro.qualcomm.cabl=0
# gpu settings
video.accelerate.hw=1
persist.sys.composition.type=gpu
debug.composition.type=gpu
# opengl settings
ro.opengles.version=131072
debug.egl.hw=1
hw3d.force=1
# interface settings
ro.sf.lcd_density=160
persist.sys.ui.hw=1
debug.sf.hw=1
debug.fb.rgb565=0
persist.sys.NV_FPSLIMIT=60
windowsmgr.max_events_per_sec=70
keydispatchtimeout=15000
# filesystem settings
ro.emmc=1
ro.phone_fat=1
ro.ext4fs=1
ro.sdcard2=1
# dalvik general tweaks
dalvik.vm.heapsize=256m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.verify-bytecode=0
dalvik.vm.check-dex-sum=0
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# dalvik jni tweaks
dalvik.vm.checkjni=0
dalvik.vm.jniopts=warnonly
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
# drm settings
drm.service.enabled=0
ro.marlin.drm.service.enabled=0
# reporting settings
ro.config.nocheckin=1
ro.config.htc.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# adb settings
persist.service.adb.enable=1
persist.adb.notify=1
# root settings
ro.secure=0
persist.sys.root_access=1
# sound settings
ro.config.ringtone=Voila.ogg
ro.config.notification_sound=Voila.ogg
ro.config.msg_notification=Voila.ogg
ro.config.cal_notification=Voila.ogg
ro.config.alarm_alert=Cesium.ogg
# htc settings
ro.htc.common.version=3.0.0.0
htc.abl.enable=0
ro.htc.framework.screencapture=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN=http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN=http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url=http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN=http://fotamsg.htccomm.com.cn/android/extra/
# setupwizard settings (these do not work well)
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.setupwizard.wifi_required=0
ro.setupwizard.enable_bypass=1
# miscellaneous settings
ro.usb_host=1
pm.sleep_mode=0
ro.fb.mode=1
keyguard.no_require_sim=1
persist.pdn.profile=pta
net.hostname=HIVEBOX
ro.media.enc.jpeg.quality=90
profiler.anr_dump_native_uid=9999
ro.config.hw_quickpoweron=0
# arthur wanted this
profile_freeNativeBmp=0
# enabling monkey borks "Languages and input"
#ro.monkey=1
The above build.prop has been tested successfully for approximately one week with the bet-you-cannot-guess-the-name ROM that I have been working on. I have NOT tested with any existing ROMs.
Hive?
Anyways, I can't say I know what even half of the lines in the build.prop do, but if it works for you, I'd imagine anyone who still has their Jetstreams would be happy with whatever you come up with.
finniest said:
Before releasing a new ROM that I have been working on I thought I would share the build.prop file that it uses. I felt that it might generate some useful discussion. If that discussion leads to problems fixed or performance gained (in any ROM) then that would be splendid.
It is likely that many of the settings in fact do nothing -- it is really not practical to test them all. I am, however, concerned about settings that users feel introduce problems and/or degrade performance.
I tried to make it human readable, however that comes at the cost of easy diffing with your current file.
Code:
# (_) (_)(_) ____
# (_)___(_) _ _ _ (____)
# (_______)(_)(_) (_)(_)_(_)
# (_) (_)(_)(_)_(_)(__)__
# (_) (_)(_) (_) (____)
DEVICE_PROVISIONED=1
# build settings
ro.build.id=HMJ15
ro.build.display.id=HMJ15
ro.build.version.incremental=218994.1
ro.build.version.sdk=12
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=六 12月 3 07:12:41 CST 2011
ro.build.date.utc=1322867561
ro.build.type=user
ro.build.user=finniest
ro.build.host=ABM010
ro.build.tags=release-keys
# product settings
ro.product.model=HTC PucciniLte
ro.product.brand=cingular_us
ro.product.name=htc_puccinilte
ro.product.device=puccinilte
ro.product.board=verdilte
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.product.version=Hive I ROM
ro.product.processor=Dual 1.5 GHz
ro.product.ram=1 GB
ro.product.display_resolution=10.1 inch WXGA (1280x800)
ro.product.main_camera=8 M
ro.product.front_camera=1.3 M
ro.product.wifi=802.11 a/b/g/n
ro.product.bluetooth=3.0
# board settings
ro.board.platform=msm8660
ro.build.product=puccinilte
ro.build.description=1.30.502.1 CL218994 release-keys
ro.build.changelist=218994
ro.build.fingerprint=cingular_us/htc_puccinilte/puccinilte:3.1/HMJ15/218994.1:user/release-keys
ro.build.characteristics=default tablet tablet
ro.build.project=Puccini_LTE:229055
ro.build.languageremove=0
ro.build.sense.version=2.1
# rild settings
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
#rild.libpath=/system/lib/libhtc_ril.so
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
# ril settings
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.ril.radio.svn=6
ro.ril.disable.fd.plmn.prefix=23402,23410,23411
ro.ril.enable.sdr=0
ro.ril.enable.gea3=1
ro.ril.enable.ucsq=2
ro.ril.enable.sim.hot.swap=1
ro.ril.set.mtusize=1410
ro.ril.disable.cpc=1
ro.ril.enable.dtm=0
ro.ril.fast.dormancy.rule=1
ro.ril.att.feature=1
ro.ril.def.agps.mode=2
ro.ril.sensor.sleep.control=1
ro.ril.disable.power.collapse=0
ro.ril.enable.prl.recognition=1
ro.ril.reject.cs.ss.enabled=0
ro.ril.reject.mo.sms.enabled=0
ro.ril.reject.mo.ussd.enabled=0
ro.baseband.arch=msm
# aa settings
ro.aa.romver=1.30.502.1
ro.aa.skulist=502
ro.aa.customizationid=262057
ro.aa.mainsku=502
ro.aa.taskid=229055
ro.aa.maincid=CWS__001
ro.aa.modelid=PG0941000
ro.aa.project=Puccini_LTE
ro.aa.cidlist=CWS__001
ro.aa.rid=235
# cne settings
persist.cne.UseCne=0
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=0
persist.cne.snsr.based.rat.mgt=0
persist.cne.bat.based.rat.mgt=0
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
# data settings
ro.config.lte=1
ro.use_data_netmgrd=1
persist.data_netmgrd_nint=11
telephony.lteOnGsmDevice=1
ro.config.svdo=1
ro.ril.set.mtu1472=1
# telephony settings
ro.phone.function=1
ro.telephony.default_network=0
#ro.telephony.default_network=9
ro.telephony.ril_class=HTCQualcommRIL
ro.telephony.call_ring.delay=0
ro.phone_storage=0
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
# wifi settings
wifi.interface=eth0
wifi.supplicant_scan_interval=120
ro.wifi.channels=
# brcm settings
service.brcm.bt.activation=0
service.brcm.bt.srv_active=0
service.brcm.bt.hcid_active=0
service.brcm.bt.btld=0
service.brcm.bt.btld_pid=0
service.brcm.bt.bluetoothd_pid=0
service.brcm.bt.avrcp_pass_thru=0
service.brcm.bt.avrcp_toggle=1
service.brcm.bt.ag_supported=1
# bluetooth settings
ro.bt.chipset=Broadcom BCM4329-B1
ro.bt.version=Bluetooth 2.1 + EDR
ro.bt.stack=Broadcom BTL-A
ro.bt.stack.version=2.0.50.032
ro.bt.profiles=4270403
net.bt.name=HIVEBOX
# audio settings
htc.audio.alt.enable=1
htc.audio.hac.enable=0
# qualcomm settings
com.qc.hardware=1
debug.qc.hardware=1
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
ro.qualcomm.cabl=0
# gpu settings
video.accelerate.hw=1
persist.sys.composition.type=gpu
debug.composition.type=gpu
# opengl settings
ro.opengles.version=131072
debug.egl.hw=1
hw3d.force=1
# interface settings
ro.sf.lcd_density=160
persist.sys.ui.hw=1
debug.sf.hw=1
debug.fb.rgb565=0
persist.sys.NV_FPSLIMIT=60
windowsmgr.max_events_per_sec=70
keydispatchtimeout=15000
# filesystem settings
ro.emmc=1
ro.phone_fat=1
ro.ext4fs=1
ro.sdcard2=1
# dalvik general tweaks
dalvik.vm.heapsize=256m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.verify-bytecode=0
dalvik.vm.check-dex-sum=0
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.dexopt-data-only=1
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# dalvik jni tweaks
dalvik.vm.checkjni=0
dalvik.vm.jniopts=warnonly
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
# drm settings
drm.service.enabled=0
ro.marlin.drm.service.enabled=0
# reporting settings
ro.config.nocheckin=1
ro.config.htc.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# adb settings
persist.service.adb.enable=1
persist.adb.notify=1
# root settings
ro.secure=0
persist.sys.root_access=1
# sound settings
ro.config.ringtone=Voila.ogg
ro.config.notification_sound=Voila.ogg
ro.config.msg_notification=Voila.ogg
ro.config.cal_notification=Voila.ogg
ro.config.alarm_alert=Cesium.ogg
# htc settings
ro.htc.common.version=3.0.0.0
htc.abl.enable=0
ro.htc.framework.screencapture=1
ro.com.google.clientidbase=android-htc
ro.com.google.clientidbase.yt=android-htc
ro.com.google.clientidbase.gmm=android-htc
ro.com.google.clientidbase.ms=android-att-us
ro.htc.checkin.url=http://andchin.htc.com/android/checkin
ro.htc.checkin.crashurl=http://andchin.htc.com/android/crash
ro.htc.checkin.url_CN=http://andchin.htccomm.com.cn/android/checkin
ro.htc.checkin.crashurl_CN=http://andchin.htccomm.com.cn/android/crash
ro.htc.checkin.exmsg.url=http://fotamsg.htc.com/android/extra/
ro.htc.checkin.exmsg.url_CN=http://fotamsg.htccomm.com.cn/android/extra/
# setupwizard settings (these do not work well)
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.setupwizard.wifi_required=0
ro.setupwizard.enable_bypass=1
# miscellaneous settings
ro.usb_host=1
pm.sleep_mode=0
ro.fb.mode=1
keyguard.no_require_sim=1
persist.pdn.profile=pta
net.hostname=HIVEBOX
ro.media.enc.jpeg.quality=90
profiler.anr_dump_native_uid=9999
ro.config.hw_quickpoweron=0
# arthur wanted this
profile_freeNativeBmp=0
# enabling monkey borks "Languages and input"
#ro.monkey=1
The above build.prop has been tested successfully for approximately one week with the bet-you-cannot-guess-the-name ROM that I have been working on. I have NOT tested with any existing ROMs.
Click to expand...
Click to collapse
Can't wait to flash your ROM ... Any details?
Sent from my HTC One
BIGMOH said:
Can't wait to flash your ROM ... Any details?
Click to expand...
Click to collapse
I'm glad to hear it. The biggest detail is that it is deSensed -- with the exception of the lock screen and camera/camcorder. Even the setup wizard is vanilla Android. Not everyone will like this fact, but there are other ROMs available for folks that need HTC Sense.
I've bundled a few recommended apps, but even with them your app drawer will be less than one page. There are fewer services running and less stuff cluttering your share menus. Less is more -- in my opinion.
It will come with different sounds, newer fonts, updated standard apps and updated tools. You won't have to update much after installing -- at least for the next while. I've also bundled a different gallery, but the integration isn't perfect. Third party camera and camcorder apps should work a little better than with other Jetstream ROMs.
There are a few more details, but those are the biggest details. I'll have a very comprehensive changelog for those that are interested.
It is all packaged up in an AROMA installer that I hope gets new users interested in trying ROMs. I'll shoot the third video in my stock-to-custom-ROM series after I release Hive.
It is still Honeycomb 3.1, but I might try to get 3.2 working in the future. Beyond that is nearly impossible without HTC help.
finniest said:
I'm glad to hear it. The biggest detail is that it is deSensed -- with the exception of the lock screen and camera/camcorder. Even the setup wizard is vanilla Android. Not everyone will like this fact, but there are other ROMs available for folks that need HTC Sense.
I've bundled a few recommended apps, but even with them your app drawer will be less than one page. There are fewer services running and less stuff cluttering your share menus. Less is more -- in my opinion.
It will come with different sounds, newer fonts, updated standard apps and updated tools. You won't have to update much after installing -- at least for the next while. I've also bundled a different gallery, but the integration isn't perfect. Third party camera and camcorder apps should work a little better than with other Jetstream ROMs.
There are a few more details, but those are the biggest details. I'll have a very comprehensive changelog for those that are interested.
It is all packaged up in an AROMA installer that I hope gets new users interested in trying ROMs. I'll shoot the third video in my stock-to-custom-ROM series after I release Hive.
It is still Honeycomb 3.1, but I might try to get 3.2 working in the future. Beyond that is nearly impossible without HTC help.
Click to expand...
Click to collapse
Thanks for the update man. I'm really looking forward to it.
Sent from my HTCONE using Tapatalk
Just For Rooted Devices
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
Here is some Enhancements:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks (new)
If u faced any problem please change "ro.ril.hsdpa.category=24" to "ro.ril.hsdpa.category=20"
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. Increase the Antutu Score (new)
11. Faster Boot-Animation FPS (new)
12. Better call voice quality (new)
13. Game tweaks
14. Qualcomm Tweaks
15. Multi Users (Enabled) (new)
U can Use Root Explorer app to edit your build.prop
Remember to set the permission to rw-r-r after editing
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
#Method 2 : Manually Editing (much more safer for inexperienced users ) RECOMMENDED
Version 2
Update date : 13 July 2015
Working SM-G530H
adblocker said:
Here we go...
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
here is some changes:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. more...
U can Use ( Root Explorer )app to edit your build.prop
Remember to set the permission to rw-r-r
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
Click to expand...
Click to collapse
How to use this mate? in detailed please
Mr.IDK said:
How to use this mate? in detailed please
Click to expand...
Click to collapse
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
any way to activate USB OTG on Grand Prime ?
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
That's a hardware limitation.
Bruh... it works.
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
Grand Prime (All Models) Doesn't support OTG since it can't bring power for external USB devices So it cant be a USB Host ... its just a USB Client .
Hardware doing it doesn't exits on Mainboard
However I put a option for it and it s ON in build.prop Just for you
deyene said:
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Mr.IDK said:
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Click to expand...
Click to collapse
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Did you made a nandroid backup? If not, factory reset from recovery, if that doesn't help, flash stock rom.
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Has anyone already comproved that the tweaks works? and improves the general performance?
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
roozbeh158 said:
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
nope the last post is for recovery the default build.prop
adblocker said:
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Click to expand...
Click to collapse
my unit is fine now. what i did was i flashed my unit via odin and now i'm thinking if i still try to modify my unit using your build.prop.
i just want to ask if your modified "build.prop" is applicable to ALL grandprime firmwares?? another thing is that i want to suggest that in your tutorial please include the troubleshooting of our unit in case of failure. I made back-up the last time i try but i don't know how to use when my unit was bricked. BTW thanks for your thread.
Manually Editing (More Safer)
For rooted Devices onlyIts totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Install RootExplorer
Backup your build.prop located in root/system/build.prop
copy it to your computer
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Multi Users
fw.max_users=10
fw.show_multiuserui=1
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer (IF YOU DO NOT DO THAT YOUR DEVICE GONNA BRICK)
reboot . If anything goes wrong try to use your default build.prop that u've backed up
adblocker said:
Its totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Backup your build.prop.
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer
and reboot . If anything goes wrong try to use your default setting
Click to expand...
Click to collapse
FINALLY MY PHONE STARTS AFTER EDITING MY BUILD.PROP.. as of now my unit is under observation for the changes. Thank you sir. :good::good:
deyene said:
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks I'm just a bit noob of this build.prop and It took me 10mins to look for permission to rw-r-r that he's talking about...
anyways before I paste the file or the text... will It be compatible with my firmware because It's for G530HXCU1AOE2 and my phone is G530HXCU1AOA2... should I replace that name?
---------- Post added at 03:17 PM ---------- Previous post was at 03:03 PM ----------
My root browser is crushing after I save it to rw-r-r and I can't edit the text or paste the file... It's always failed
---------- Post added at 03:34 PM ---------- Previous post was at 03:17 PM ----------
My build.prop is now empty after I paste the modified build.prop but I don't find any problems... why is that?
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes][TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
REMEMBER
Roms like Project Lucky, Noble Rom, and others can already have some of this codes, SO PAY ATTENTION on what you will do or what you are doing because im not responsable of your future problems or errors if you do something wrong so please first of all ask your developers or look in the "BUILD.PROP" if it already have the code you want put
Ok nice to find them all around on one place all do I don't agree with most of them.
Hire are some for you to try out.
#dalvik
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=150m
dalvik.vm.heapsize=261m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
Adjusted values by my self to fit this tin can based on this as a base:
https://01.org/android-ia/user-guides/android-memory-tuning-android-5.0-and-5.1
I deed go with initial devlik heap size of 16MB instead of 8 as 8 doesn't fit so it's increased almost instantly. I am still testing them my self but I have to say impressions are rather good in many arias from tasks witching to more tasks steady remaining in RAM. Less to none apps crashing & also far less lag in memory hungry apps. All this as this should actually initial save a pretty good amount of ram compared to initial reference settings. The positive effect on battery life remains to be seen but it certainly is positive. I am testing it on last official CM12.1.
You may also want to try:
debug.enabletr=1
It enables Tile based rendering. The tile based rendering is faster but it also needs more time for textures to be loaded so results don't have to be always positive (even in most cases they are). Tile based rendering on the other hand certainly also saves some power.
Even Adrenos aren't top of the pops in Tile based rendering (compared to MALI's & PowerVR where this is default rendering mode) it certainly helps.
Let me demonstrate in tied screanshot.
For rendering composition I use:
debug.composition.type=dyn
This is basically to let it choose by flags between GPU & CPU all do most things are GPU rendered this day's still saving some juice on those that are ment to be rendered on CPU is a good thing. It naturally goes with:
dev.pm.dyn_samplingrate=1
I find this surface flinger config best up to date:
#Surface flinger 1.0 2.0 4000
ro.fling.distance.coef=2.0
ro.fling.duration.coef=3.0
ro.max.fling_velocity=3000
It saves a lot on resources even compared to defaults not to mention over exaggerated other ones & yet it produces very smooth results.
Also remove the remark (#) on:
persist.sys.purgeable_assets=1
It does cost a bit of speed (rather not significant) but I still recommend it to be used in contrast to same page merging where performance hit is significant enough.
That's it in shortly, best regards.
Zola III, Thanks for the tip, i will edit the codes and put more
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Mar Ian said:
Hi,
There is a way to increase sound volume in s3 neo? It's way to low! Like editing some file or something... I am rooted but viper app doesn't install it's saying something about the busybox...
Click to expand...
Click to collapse
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Zola III said:
Well honey install the busy box comands extension binary.
https://play.google.com/store/apps/details?id=stericson.busybox
(that is installer).
It is possible to manually adjust output levels with good root Explorer & text editor but I don't recommend you to do that as you are obviously a noob.
Anyway the file is located at root /system/etc/mixer_paths.xml
& your interest is only in the:
<!-- Play Scenario -->
Section.
Click to expand...
Click to collapse
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Mar Ian said:
I had to modify something in the build prop file and now viper works but I don't think it increases the in call volume or overall volume. It just gives better headphone audio.
Anyway thanks man! :good:
Click to expand...
Click to collapse
LOL. When you install ViPER4Android it mods build.prop by it self disabling lo power (DSP) audio decoding. It's natural that it doesn't touch cellular radio layer (fm radio & calls), however all adjustments are in the mentioned omx file.
Thank you very much. I am trying all of these tweaks on my s5 running cm14 ROM and it looks like its running perfectly fine so far. I will test more and see what kind of improvements I get.
Thanks for combining all of these in a single thread. It just removed the need of any kind of performance or tweaking app.
How to apply this tweak? Do I just paste it into build.prop and then reboot? I have cm 12.1
Thank you for this thread.
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
There is a code ro.config.tima umm will it be tima or time?
Ciro said:
HELLO TO ALL GUYS, I MADE THIS GUIDE FOR SHOW TO ALL PEOPLE OR DEVELOPERS OF ROMS ALL THE CODES FOR TWEAKS TO BUILD.PROP ( system ), this work on all devices but some roms can have problems if you put something of this so asking ur Dev roms...
[TO ALL DEVS: feel free to use all the codes in your rom, but remember give credits to me and xda community for edit codes]
[TO ALL DEVS: all the codes are working fine in lollipop and are edited by me and others dev for more performance and others thing so not needed do more changes]
Code:
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
Click to expand...
Click to collapse
Umm there is a code ro.config.tima will it be tima or time