Installed 4.4.2: W7 will not recognize i605 as a device.
Tried Samsung generic driver, as well as v-1.5.14, v-1.5.33 and v-1.5.45.
None to them worked. Downloaded driver from Kies. it did not work either.
W7 recognized i605 with 4.1.2.
Any ideas?
dlw1146 said:
Installed 4.4.2: W7 will not recognize i605 as a device.
Tried Samsung generic driver, as well as v-1.5.14, v-1.5.33 and v-1.5.45.
None to them worked. Downloaded driver from Kies. it did not work either.
W7 recognized i605 with 4.1.2.
Any ideas?
Click to expand...
Click to collapse
Try going to settings-about phone-build number, then tap 7 times. Then go to developer options and turn on USB debugging. This worked for me.
Related
Attempting to update new Vibrant (Galaxy S) using "Unleash the beast v0.1" - post reboot my XP machine is asking for a "Gadget Serial" driver. I've been looking around for such a beast but not having much success. The phone is displaying a lovely "Do not turn off target!!" error too. Makes me a tad nervous.
Suggestions?
[Solution]
FWIW: This can be fixed by downloading "PC Studio" from Samsung. (This board isn't letting me post the link but you can search on the Samsung main site).
I tried installing that pc studio. Did not work. I have windows vista-64 bit.
Same problem
Hi I'm new in this forum and new to Android also.
I'm having the exact same problem, when I'm trying to flash my phone (AT&T Captivate) back to stock using Odin3 One-Click Downloader my PC is asking me for a Gadget Serial Driver.
I already install ( a few times ) the Phone drivers downloaded from the Samsung site and my PC recognize my phone with no issues. My problem is when I'm in Download mode.
I have a Samsung Captivate rooted with 2.1 update 1 (JH7)
MY PC is running Windows XP Professional Service Pack 3
I will try the PC Studio from Samsung
Problem solved
Problem solved after installing the Samsung PC Studio. Thanks
It did not fix my problem. Is there another fix? Device manager even says that it is "other device" no drivers.
Try installing Keis mini. i had the same problem and that fixed it.
samsung.com/us/support/downloads/SGH-I897ZKAATT
WTF are Samsung up to? Seriously?
I have a Galaxy S2 and i'm stuck on this Gadget driver issue. So I googled, found this thread and started looking. I've now found:
Kies Lite (Samsung site)
Kies 2.0 (Samsung site)
PC Studio 7.blah.blah... (Some driver download site)
PC Studio 3.blah (Samsung site)
NEW PC Studio 1.blah (Samsung site)
Talk about f*&king confused!
Oh and Kies 2.0 never finishes installing, I suspect its in a look as it sticks on "Evaulating Launch Conditions"...
WTF?
Anyone ANY clues on WHICH is the correct software AND version?
please anybody help us
I tried all of the above but nothing working. I tried on 2 different computers. one with
win7 64bit the other with winxp. both had the same problem. the stupid gadget serial
driver.
Try updating your Samsung drivers to the most recent ones:
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
I totally got it to work for my Galaxy SII
I remember putting my phone into some sort of usb tethering in the setting
so I just unchecked it and the drivers installed themselves
Settings> Wireless And Network > USB Utilities
and just push the connect to PC button and when you put your phone into Download mode the download wizard should install the drivers
Just so you wont switch..
From July 2012 Kies version
7HUND3R said:
Here it is: version 1.5.6.0 of the samsung usb drivers just extracted from latest updated kies
http://www.mediafire.com/?5fy7vwxhrhrpiwj
Click to expand...
Click to collapse
Pierrick
Gadget Serial
None of that worked for me. Doing the following worked for me. Basically you have to tell your pc what kind of driver this "Gadget Serial" is.
Goto "Device Manager".
Find the "Gadget Serial" device.
Right click and choose select update driver.
select "browse my computer for drivers" and then choose "Let me pick the drivers to install".
zachol said:
Try updating your Samsung drivers to the most recent ones:
http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Thanks so much . This fixed my issue on Win8 x64 with Hemdal and Epic 4g
micromax a71
micromax a71 driver gadget serial error how to solve
I want to flash my Q mobile i6 metal one but when I connect to computer and it has yellow icon too and it not working.... do I flash if gadget serial drive not work properly ??? How to flash Qmobile i6 metal one
Anyone else been having problems connecting to Kies?
Henco
Nope, worked fine for me first time. Make sure when you first install it you select Tools -> Install Driver. This will install the required USB driver on your system. It's not done automatically it seems.
Yes, Windows 7 x64. Worked on laptop no problem. Main PC. Same OS was a no go. Had a look around, it was to do with CDC driver not installing. This is related to the Samsung USB modem. Found separate Samsung USB drivers had been installed and were out of date and taking precedence over the new Kies install. Solution was to delete any thing Samsung related and start again. Voilà CDC installed just fine.
No problem on win 7 x64 with latest Kies .
jje
Fornowagain said:
Yes, Windows 7 x64. Worked on laptop no problem. Main PC. Same OS was a no go. Had a look around, it was to do with CDC driver not installing. This is related to the Samsung USB modem. Found separate Samsung USB drivers had been installed and were out of date and taking precedence over the new Kies install. Solution was to delete any thing Samsung related and start again. Voilà CDC installed just fine.
Click to expand...
Click to collapse
Windows 7 x64 here too. So what does anything Samsung include? So how do I prevent the out of date drivers taking precedence?
Henco
Found the problem, Kies won't work when in debugging mode.
Hi,
Does somebody know where I can get the drivers in title!!
I have a brand new SGS2 and would like to root the thing. But it's a bit more tricky the my old SGS
In my device manager win7 x64 - I get warning on "CDC serial & SAMSUNG Android"
I have Kies and Android SDK installed and it will still not find the drivers.
Thanks in advance.
have you plugged in the phone while kies is running mine wouldnt install the drivers till i did that.
Its the same for me on one of my computers. It was all done correctly, but no drivers are found. Ive tried repeatedly and have uninstalled and reinstalled Kies but it makes no difference.
Go to Kies directory in Program Files you will find a directory something like "USB Driver"
inside of it there's USB Driver for Galaxy S II, install it.
Problem solved.
MAJED.y said:
Go to Kies directory in Program Files you will find a directory something like "USB Driver"
inside of it there's USB Driver for Galaxy S II, install it.
Problem solved.
Click to expand...
Click to collapse
maybe this will help someone as well. I had the same problems as you above with these driver not installing. So what i did was the following
installed samsung kies V.2.2.2.11044 with the tel hooked up to the usb and the computer. I did not have USB debugging on in the : settings/applications/usb debug (unchecked)
then I let kies start did not find the drives, so I unhooked the tel. ( galaxy s2) and I enable USB debugging, plugged it in again, started kies and it found all rivers.. NOTE.. it found all drivers but I do not use kies other then to get the drives, I use Odin 1.8.5 which after this , Odin worked just fine.. so you can still upgrade, just without using this Samsung Kies. which sucks anyway
best
This worked for me:
Install kies and open it, connect you phone and let windows attempt to install drivers, then click tools drop down menu and click 'install driver', kies will then download the drivers for the phone.
kies v. 2.0.1.11053_99
Kies -> Tools -> Install driver
XD
it worked!
mojolive said:
maybe this will help someone as well. I had the same problems as you above with these driver not installing. So what i did was the following
installed samsung kies V.2.2.2.11044 with the tel hooked up to the usb and the computer. I did not have USB debugging on in the : settings/applications/usb debug (unchecked)
then I let kies start did not find the drives, so I unhooked the tel. ( galaxy s2) and I enable USB debugging, plugged it in again, started kies and it found all rivers.. NOTE.. it found all drivers but I do not use kies other then to get the drives, I use Odin 1.8.5 which after this , Odin worked just fine.. so you can still upgrade, just without using this Samsung Kies. which sucks anyway
best
Click to expand...
Click to collapse
This worked a treat - thank you dude!! lifesaver!
xtrememorph said:
Kies -> Tools -> Install driver
XD
Click to expand...
Click to collapse
i did this, then i get a Windows 7 popup on the bottom right saying installing drivers, but it fails and both CDC Serial and SAMSUNG_Android have a red X beside them. so frustrating
Kies
I have tried all of the suggestions above except turning on USB debugging. None have worked.
different attempts give me different messages
Installing drivers does nothing.
Sometimes plug in says missing MTP
Sometimes plug in says missing CDC
Sometimes device recognized completely.
All cases, first plug in while kies is running causes kies' "devicemanager.exe" to crash followed by infinite connecting loop.
Any ideas PLEASE PM let me know
Manually install drivers but instead of choosing Samsung MTP drivers choose Mass Storage Drivers.
Update Driver >> Install from PC >> First Browse to the Program Files/Samsung/usb drivers folder then >> I want to choose from PC >> Choose Mass Storag e Driver.
Worked for me just now.
not working
I have tried all solutions from this thread. Still have the CDC error in my device manager on the PC.
x86
W7
Anyone can help me?
Thank you!
Noonski said:
Manually install drivers but instead of choosing Samsung MTP drivers choose Mass Storage Drivers.
Update Driver >> Install from PC >> First Browse to the Program Files/Samsung/usb drivers folder then >> I want to choose from PC >> Choose Mass Storag e Driver.
Worked for me just now.
Click to expand...
Click to collapse
Great fix, worked for me. Thank you
I Solved the issue this way::
Issue: Samsung Galaxy SII didn't find driver after kies update.
Solution: Uninstall the old kies completely + Samsung USB Driver..... which is installed.
Delete the files completely from program files to make sure we get everything new during next install... U may need to use a safe mode boot sometimes for a full delete.
Download latest kies from samsung.com to get an original fresh one.
Then do the install.. Plug in phone...
Hi all,
I have the build 2.1.0.11095_121 and I can get my sg2 to be recognised anymore.
I have tried uninstalling and debug and off. No joy.
Does this mean I won't be able to root or load apps on from eclipse?
Any ideas to fix arggghh?
I have tried all above solutions but this what helped me was go to Kies directory -> USB Driver and start setup All problems gone and Kies is running now.
Always the simplest solution is the hardest to find
mmiesz said:
I have tried all above solutions but this what helped me was go to Kies directory -> USB Driver and start setup All problems gone and Kies is running now.
Always the simplest solution is the hardest to find
Click to expand...
Click to collapse
this worked for me ! big props
is there any alternative way to install drivers without kies?
i dont wanna install kies :S
sadicim said:
is there any alternative way to install drivers without kies?
i dont wanna install kies :S
Click to expand...
Click to collapse
Go to my 4shard, link in my sig, drivers are in there. (4icon) (its been updated to the newest one as of December 2011)
Thanks Veyka, your file on 4share did the job.
I tried connecting my Samsung S3 to my computer and it doesn't connect. I tried debugging also and it doesn't connect. I uninstalled drivers, installed GS3 Toolkit and nothing is happening. I know there are related posts but those posts are not for i9300 they are for verizion, at&t, etc. What can I do to fix this problem? Can it be something with the ROM? I am running CM10 Paranoid Android.
Omarbibz said:
I tried connecting my Samsung S3 to my computer and it doesn't connect. I tried debugging also and it doesn't connect. I uninstalled drivers, installed GS3 Toolkit and nothing is happening. I know there are related posts but those posts are not for i9300 they are for verizion, at&t, etc. What can I do to fix this problem? Can it be something with the ROM? I am running CM10 Paranoid Android.
Click to expand...
Click to collapse
Download driver.
Download SAMSUNG Android ADB Interface Driver v2.9.503.726
Restart your pc..
If not it should be test a different cable, tries to change usb port
if it is not test a different pc.....
CM10?
Do you happen to be using CM10, nightly? As found this to be the problem, while it worked with stock and even the Omega 26 build of JB, it does not work with CM10 nighties, as no matter what the "MTP USB Device driver" can not and will not install, what is interesting is the exact same driver worked less than 24 hours earlier with omega and did not require a reinstall, so my guess is CM10 has broken this support in the current builds.
What I'd like is a generic MTP driver to see if that works.
ERIC
solution failing mtp driver S3
Omarbibz said:
I tried connecting my Samsung S3 to my computer and it doesn't connect. I tried debugging also and it doesn't connect. I uninstalled drivers, installed GS3 Toolkit and nothing is happening. I know there are related posts but those posts are not for i9300 they are for verizion, at&t, etc. What can I do to fix this problem? Can it be something with the ROM? I am running CM10 Paranoid Android.
Click to expand...
Click to collapse
I have found the answser to this: After one year of troubleshooting, Done all the steps before like you mentioned and notthing happened too.
So I deciced to back-up my S3 to on a mini SD card. After that I gave the phone a factory reset. The phone reloaded and pushed the software again to the phone. If you make the phone factory default make sure you have a hotspot in the neaberhood so you can connect on to the wi-fi.
Why the phone get its software through Wi-FI or 3G to get its software again and Wi-Fi is faster:cyclops:
After the phone is back to factory default follow the instruction on the phone. It's just like you have the phone new out of the box . When that's its done connect it to your laptop/pc and start KIES or what programming your are using to sync your S3 with your laptop/PC and voila it connects and works and when you managed to set your bacp-up back from your S3 you can even see it back in the KIES program. Well dudes I hope this was help full.
Best regards,
Damian Wikkeling
ICT specialist
I recently changed my laptop to yoga pro 2
and this computer has windows 8.1 pre-installed.
my verizon s4 was already rooted and I was able to odin using this laptop.
Now, I'm trying to re-root, but saferoot is not responding to my s4.
For the phone, usb debugging is enabled and for the laptop, samsung usb driver is installed through kies.
Is 8.1 not comparable with S4 or am I missing something?
qudwis said:
I recently changed my laptop to yoga pro 2
and this computer has windows 8.1 pre-installed.
my verizon s4 was already rooted and I was able to odin using this laptop.
Now, I'm trying to re-root, but saferoot is not responding to my s4.
For the phone, usb debugging is enabled and for the laptop, samsung usb driver is installed through kies.
Is 8.1 not comparable with S4 or am I missing something?
Click to expand...
Click to collapse
I think all drivers installed automatically for me on 8.1, and adb/odin worked fine.
On 7, my S4 wasn't recognised other than MTP/PTP while on and Samsung drivers did nothing, but this worked perfectly: https://github.com/koush/UniversalAdbDriver
Yeah you should be able to just install the drivers and it will work not sure if the link just posted will work but if not there not hard to find. Just google s4 root and any number of links will have the drivers on hand.