Hello everyone,
I was originally on stock 4.3 rom.
I wanted to unlock my ATT Galaxy note 2 so I downgraded to 4.1.1, went to service menu and did the unlock, and it was fine. I then decided to do an update through att servers, which it downloaded and installed. However, after installing, it rebooted to the "Samsung Galaxy Note II" screen, and won't go past that.
I decided to put the 4.1.1 rom that worked on it via odin, and this installed fine, but it still wouldn't go past the "Samsung Galaxy note II" screen.
I then proceeded to using Samsung Kies and did Emergency Recovery. It downloads 4.1.2 firmware on my computer, but when it comes time to put it on to my Galaxy note 2, the phone (in download mode of course) reads at the top "unsupported version" , and kies on my computer tells me "the installation failed due to the samsung sgh-i317 device. Please contact Samsung Services if this problem proceeds."
I did notice however, after using kies, even though it fails, and pressing the power button the "Samsung Galaxy Note II" logo screen does not appear, and the phone just show the screen that says "firmware upgrade encountered an issue. please select recovery mode in kies and try again". I then decided to put the 4.1.1 again thinking that maybe this time it will work, but nope just goes back to "samsung galaxy note II" screen and does nothing. Now, I can use kies to go back to "firmware upgrade encountered an issue. please select recovery mode in kies and try again" or use the 4.1.1 to go back to "Samsung Galaxy Note II" screen and just sit there.....
I don't care about unlocking the phone or not anymore. I don't care about having custom rom or anything. All I want is the original Stock rom 4.3 from AT&T. Can anyone please help me?????
Also, I have been using odin 3.7, the rom that i used that worked (the 4.1.1) is called: KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5
my phone reads this in download mode:
Odin mode
Product Name: SGH-I317
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Know Warranty Void: 1
RP SWREV: A2
Got same problem
I am in the same boat. I got OTA to 4.3 and I went and downgraded to 4.1.1 to unlock and update and got stuck with error. Can't restore or do anything with the phone now. In ODIN, it got stuck with sboot.bin. It stuck at bootloader.
Thanks.
adilnota5 said:
Hello everyone,
I was originally on stock 4.3 rom.
I wanted to unlock my ATT Galaxy note 2 so I downgraded to 4.1.1, went to service menu and did the unlock, and it was fine. I then decided to do an update through att servers, which it downloaded and installed. However, after installing, it rebooted to the "Samsung Galaxy Note II" screen, and won't go past that.
I decided to put the 4.1.1 rom that worked on it via odin, and this installed fine, but it still wouldn't go past the "Samsung Galaxy note II" screen.
I then proceeded to using Samsung Kies and did Emergency Recovery. It downloads 4.1.2 firmware on my computer, but when it comes time to put it on to my Galaxy note 2, the phone (in download mode of course) reads at the top "unsupported version" , and kies on my computer tells me "the installation failed due to the samsung sgh-i317 device. Please contact Samsung Services if this problem proceeds."
I did notice however, after using kies, even though it fails, and pressing the power button the "Samsung Galaxy Note II" logo screen does not appear, and the phone just show the screen that says "firmware upgrade encountered an issue. please select recovery mode in kies and try again". I then decided to put the 4.1.1 again thinking that maybe this time it will work, but nope just goes back to "samsung galaxy note II" screen and does nothing. Now, I can use kies to go back to "firmware upgrade encountered an issue. please select recovery mode in kies and try again" or use the 4.1.1 to go back to "Samsung Galaxy Note II" screen and just sit there.....
I don't care about unlocking the phone or not anymore. I don't care about having custom rom or anything. All I want is the original Stock rom 4.3 from AT&T. Can anyone please help me?????
Also, I have been using odin 3.7, the rom that i used that worked (the 4.1.1) is called: KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5
my phone reads this in download mode:
Odin mode
Product Name: SGH-I317
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Know Warranty Void: 1
RP SWREV: A2
Click to expand...
Click to collapse
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Got it to work.
lacoursiere18 said:
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks...I got it to work again flash via ODIN following this thread
http://forum.xda-developers.com/showthread.php?t=2589891
You can download the firmware without bootloader here. I download and ran via ODIN and my note 2 ATT back to normal.
http://d-h.st/DGZ
lacoursiere18 said:
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
same thing happened to my note 2 i317. it was running on 4.4.2, downgrade it to 4.1.1, successfully unlock it. but my son tried to update it ota. now its stuck on Samsung logo and won't get to recovery mode. I tried flashing the 4.1.1 firmware again but it just won't pass the Samsung logo and cant get it to recovery mode. please help me
For unlock i371 we have 2 ways:
1)If your phone have 4.1.2 or less you jast need to try unlock codes:
*#197328640#
Select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF >After choosing this option, wait about 30 seconds.
Then go back one step by pressing the Menu button and then select Back.
This will take you to [6] Network Lock options
Choose [4] NW Lock NV Data INITIALLIZ
Wait for a minute then reboot your phone.
Insert a SIM Card from a non-AT&T carrier
IF it not help to you, you need downgroad FW.
2) if you have 4.2.2 or more(4.3, 4.4.2.)
You need to wach this video and unlock your device! youtube.com/watch?v=KVrhNO__9JY
You need downgroad MODEM FW(NOT ANDROID VERSION!!!) and use *#197328640# from 1 step.
Have fun!
thank u very much
If you don't know this, watch "The Brick" from rirozizo: https://www.google.com/url?sa=t&rct...=yeCRBYPIcdesj7y16z2WIw&bvm=bv.83339334,d.c2E
So, I attempted to install TWRP (Team Win Recovery Project) with Heimdall on my Galaxy Note. It got soft bricked, and it's stuck in Odin mode. This is what's displayed on the screen whenever it's powered on:
"ODIN MODE
PRODUCT NAME: SGH-I717
CUSTOM BINARY DOWNLOAD: YES(1 counts)
CURRENT BINARY: CUSTOM"
Under that, there is an error message displayed:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is there a way I can possibly restore it? Removing the battery and SIM won't do much, and Kies doesn't show it in Firmware emergency recovery, yet it still attempts to connect. Thanks a lot!
EDIT: KIES managed to fix it! Though I lost my data... Should have made a backup, stupid me.
I own a Samsung Galaxy A9
I tried to update the firmware from the original lollypop to (maybe) marshmallow
I failed to update using the software, so i updated using smart switch
It went wrong, the update failed.
Now the blue screen with "An error has occured while updating the device software. Use the emergency recvery function in the Smart Switch PC software" appears..
I tried the emergency recovery but it also failed
The only button combination that worked is the power button + volume down --> It restarted, but the same screen appears
I even tried refresing the software with Odin, but it failed.
The phone says "FRP is enabled, not allow download non-FRP aboot binary"
Odin doesn't work
The samsung customer service in singapore (my country) is not able to help. Would really appreciate it if somebody could help me with this.
-Michael
Wrong part of forum!
Mikekaipas said:
I own a Samsung Galaxy A9
I tried to update the firmware from the original lollypop to (maybe) marshmallow
I failed to update using the software, so i updated using smart switch
It went wrong, the update failed.
Now the blue screen with "An error has occured while updating the device software. Use the emergency recvery function in the Smart Switch PC software" appears..
I tried the emergency recovery but it also failed
The only button combination that worked is the power button + volume down --> It restarted, but the same screen appears
I even tried refresing the software with Odin, but it failed.
The phone says "FRP is enabled, not allow download non-FRP aboot binary"
Odin doesn't work
The samsung customer service in singapore (my country) is not able to help. Would really appreciate it if somebody could help me with this.
-Michael
Click to expand...
Click to collapse
This part of the forum is for the Samsung Galaxy S7 Edge, NOT A9!
Try here:
Sub-Forums : Samsung Galaxy A Series
Hello Guys, I have this Galaxy Mega SGH-M819N for MetroPCS. It enters to download mode but not recovery mode. The phones turns on but gets stuck on logo boot loops. I flashed the phone with three different firmware (M819NUVUBOH3 4.4.4, M819NUVUBNI5 4.4.4, and M819NUVUAMK7 4.2.2). The phone finishes the flash but after flash, the phone gets stuck on entering to "Recovery". It never enters to recovery and begins getting hot. I have to remove the battery and the phone starts boot looping again. The same thing happens when I use the Smart Switch emergency recovery. Here is what is says when the phone is in download mode:
ODIN MODE
PRODUCT NAME: SGH-M819N
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 4
WRITE PROTECTION: Enable
Help Please!!
Anybody? Any ideas?
Seems like one or more of the partitions is corrupted. You can try and flash a custom recovery, like TWRP, to see if maybe it will let you into recovery to do a factory reset.
es0tericcha0s said:
Seems like one or more of the partitions is corrupted. You can try and flash a custom recovery, like TWRP, to see if maybe it will let you into recovery to do a factory reset.
Click to expand...
Click to collapse
Hi there and thank you for your reply. I tried flashing a custom TWRP "twrp_2.8.5.0_metropcs". The phone accepts the file installation via Oding but the phone still gets stuck on "Recovery Booting...". The only difference is that below the Recovery Booting words is also the "Set Warranty BIT: Recovery" words too. It hangs there, then the boot loop starts.
Other than having Samsung take a look at it or having someone perform a JTAG service, I'm not sure there's much else you could do.
es0tericcha0s said:
Other than having Samsung take a look at it or having someone perform a JTAG service, I'm not sure there's much else you could do.
Click to expand...
Click to collapse
I actually do not think that Samsung would do anything about it since the "KNOX WARRANTY VOID: 0x1" is set. Somebody mentioned me about that JTAG service but I do not know who can perform that and if the phone is worthy.
need rom
pls i need a custom rom for my sgh m819nuvuboh3
I flashed a custom rom with root using TWRP on my note 5 and it was working fine at first. Then installed Root Switcher so that i can log into snapchat because snapchat doesnt allow rooted phones.
The ROM i installed was KHONGLOI-NOUGAT-V5
Later the next day, i restarted my phone and it got stuck in the SAMSUNG logo, i tried force restarting my phone many times but still same thing. the phone started to heat so i went into TWRP and powered off my phone. And now when i try opening my phone it just opens TWRP everytime.. Was thinking of flashing stock rom using TWRP but my laptop doesnt recognize the phone.
I tried to flash stock rom using ODIN MODE but it keeps failing.. Or did i just chose the wrong PDA/CSC ?
Here's what shows in ODIN MODE...
PRODUCT NAME: SM-N920C
CA_ TYPE: CA_2
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FAP LOCK: OFF
RP SWREV: B:5 K:0 S:1
And i was wondering if the RP SWREV is something to look at?
Is there a way to get my phone back?
Thanks in advance