Getting CM10 on a friends phone and wants wifi. So far i have
Flashed to 2.3.4
Rooted device
Installed clockwork mod recovery and bootstrapper
Booted into cwr and installed cm10
Factory reset and was able to access cm10 but alas no wifi
Booted to cwr and installed gp apps for 4.1.2 and the wifi fix since this step device is stuck on Motorola dual core logo only allows access to android recovery and not cw also no USB access. Any Ideas on how or if i can fix this issue?
Don't use wifi fix unless you have a milestone x2.
Verify md5 checksum for every file sbf, rom...
Sbf again, wipe data, verify system version is 1.3.380
Sent from my XT862 using Tapatalk
Device will not allow me to sbf back to original 2.3.4 using rsd lite.
Pull battery, hold volume up button, reinsert battery, press power, release power, when you see motor logo, release volume button when you see starting RSD protocol
Sent from my XT862 using Tapatalk
Related
My phone will only charge AC or USB if I do a reboot. If it is up and running it will not charge.. nor will it be recognized by the PC unless I do a reboot... Is there a file that needs to be replaced or setting somewhere? It started a few weeks ago when I flashed back to 1.26, OTA'd to 1.57(started then), then to 1.83.. I then OTA'd to 2.3.4 but it did not take because I had moddified the /System folder with a boot animation...
I am currently on Ninja 4.4 Unlocked and Rooted with Faux OC Kernel...
Any help would be greatly appreciated. Thank you all..
Also CWM will not work on my phone.. try to get into Android recovery and it just sits at "Entering Android Recovery Mode" use Root Manager or ACS Updater to flash ROMS since I cannot get into CWM(Help with that needed too Thanks!
Update... Still won't charge unless I reboot...
I am now able to boot into CWM, but only if I use the CWM installed via ROM Manager.. If I flash Tenfar's I get stuck on the "Entering Android Recovery Mode".. If I use the one in ROM Manager and am plugged in via AC.. I can get into CWM?!?!!? Any ideas on the charging and CWM? Thank you.
I have the same issue as you...only way I can get the phone to charge when its on is to recover from a nandroid backup. I believe a file or kernel is corrupted from when I did the root. I have the amoled version, which do you have?
I finally have my system charging without having to reboot!!!
I had to flash the a full SBF with Pudding from HERE after wiping all data, cache, and dalvik cache. Flashed via RSD Lite.
Still having issues with CWM not wanting to come up. I have been able to get CWM come up plugged into an AC charger using the version loaded by ROM Manager. If I flash any other CWM I get stuck at the Dual Core Screen with "Entering Android Recovery" But i am in recovery if I check via ADB when connected to a PC... I shows my device and shows "recovery" state. So it is getting into recovery. I just don't see the menu on my phone screen.. Any ideas?!?!? Thanks!
Hello!
I own an Atrix which is rooted on stock froyo 2.2.2 from Brazilian carrier Claro.
I tried to install CWM with Rom Manager but after my device rebooted I got the Failed to Boot 2 error message, so I flashed to bootloader with IHOP_bell.sbf (didn't unlock it) and it booted again but now the phone only recognizes 373mb of ram and I cant enter Android Recovery, it shows the Failed to Boot 2 error message again.
Any help would be greatly appreciated!
Thanks for your time!
Fixed.
If you have a similar issue after trying to install CWM with Rom Manager:
(YOU WILL LOSE ALL YOUR DATA)
1. Acquire a full sbf of the rom you have installed.
2. Download RSDLite 5.5.
4. Open RSDLite 5.5, click "..." and select your sbf.
5. With a full charge, plug your phone in and reboot your phone holding volume up.
6. Wait for RSDLite to recognize it.
7. Click start and wait.
Everything should be fine now
At this point is good to mention CWM is not to blame for this AFAIK since I can install it from the APK just fine. Rom Manager was the one who screwed up big time.
New Droid Razr MAXX.
OTA Updated to ICS. Rooted with Droid RAZR Utilities 1.40. Installed Bootstrap and recovery, made a backup. Was looking to install a ROM, saw one saying I needed Safestap. Uninstalled Bootstrap, installed Safestrap using Utilities 1.40. Ran Safestrap, Installed recovery, rebooted, enabled Safe-system. Rebooted. I have a black screen, nothing happens when I push and hold any buttons. I have a brick as far as I can tell. Any suggestions? What did I do wrong?
Ok. Holding key combos got it to reboot with vol-down and power. If I let it go past the safeboot splash without hitting anything it goes black.
Went back into recovery, disabled safe-system, reboot and and it works ok.
How can I get into safe-system and flash a this rom? Did I do something wrong in the process?
Use 1.81 utility to flash stock 211 and start over. Install superuser/root and busybox then install safe strap and install recovery. From there make a backup and then enable safe mode. Use rom that you put on external SD card and install. Wipe data before booting new rom.
SHVR MAXX
Alright have a razr maxx I'm running 98.72.16.xt912.verizon.en.US jelleybean build 9.8.20-72_VZW-16. I rooted using razr blade and then installed
Cwm touch black edition. Now everytime I reboot I get stuck in a encryption unsuccessful error screen. I have tried using Matt's utility
And that gets the phone back to a usable state as long as I don't reboot or the battery doesn't die if that happens it will boot back into the encryption error. Cwm recovery put some files on the internal SD and I think that's what is causing the problem but I can't seem to delete them they are in a folder named bmm. Does anyone know what I can do to get this fix I've tried everything that I could think of but nothing is working.
I decided to flash a factory image since the GPS was not working anymore with whatever ROM I tried, plus random problems. The phone was previously set up with CM10.1 and BMM.
Installed RSD Lite, Moto drivers, downloaded several stock ROMs.
From the factory recovery mode I cannot flash any of those zip files so I proceed with RSD lite. I flashed "9.8.2O-124_SPUEM-14_S7_USASPDRICS01O2UKE1007.0R_USASPDRJBO2GB_P013_A012_p2b_S1FF_fb.xml.zip" which is a retail UK JB image. The phone shows the very first boot screen (red logo) and then the screen goes blank. The computer still sees an MTP device, though only in device manager.
I've tried installing other images but they are an older type (ICS I guess, 01.6.7.2-180&01.6.5.1-167) and RSD shows an error while trying to flash the first file from the archive.
Oh, I still have the "Customer error: contact dealer" on the first boot screen, I think this was from a ICS to JB upgrade with CID deletion(?).
I've already flashed twice using RSD, deleted cache+data, rebooted and left the phone to start up for ten of minutes, don't know what to do. RSD lite reports that flashing was ok.
been there
brainwash123 said:
I decided to flash a factory image since the GPS was not working anymore with whatever ROM I tried, plus random problems. The phone was previously set up with CM10.1 and BMM.
Installed RSD Lite, Moto drivers, downloaded several stock ROMs.
From the factory recovery mode I cannot flash any of those zip files so I proceed with RSD lite. I flashed "9.8.2O-124_SPUEM-14_S7_USASPDRICS01O2UKE1007.0R_USASPDRJBO2GB_P013_A012_p2b_S1FF_fb.xml.zip" which is a retail UK JB image. The phone shows the very first boot screen (red logo) and then the screen goes blank. The computer still sees an MTP device, though only in device manager.
I've tried installing other images but they are an older type (ICS I guess, 01.6.7.2-180&01.6.5.1-167) and RSD shows an error while trying to flash the first file from the archive.
Oh, I still have the "Customer error: contact dealer" on the first boot screen, I think this was from a ICS to JB upgrade with CID deletion(?).
I've already flashed twice using RSD, deleted cache+data, rebooted and left the phone to start up for ten of minutes, don't know what to do. RSD lite reports that flashing was ok.
Click to expand...
Click to collapse
Did you erase CID?
if you did yo need to boot in a different way
U did a factory reset in stock recovery? U cannot flash a ics image after flashing jb via rsd. Try again jb EU image than go to stock recovery and perform the wipes
Tapped from my RazR
Got it "fixed", finally. I had to go back into the stock boot/recovery menu and choose "BP Tools", last option from the menu and then it booted normally.
I still have to do this after each reboot because it boots to the black screen: hold the three buttons together until it flashes (which means a hard reboot), let go of the power button, press power button again while the other two are still pressed.
On the plus side the GPS started working again after factory reflash which it was kind of expected since the same chip is providing also WiFi and bluetooth which were running fine.
I have a root question: the device was rooted with the virtual machine procedure but after a factory reset the root was lost. I had saved it using Voodoo RootKeeper and the app shows: superuser installed, device rooted, /system supports root protection, protected su available. The "root permission granted" checkbox is disabled though and no application is able to retrieve the root. The su binary is in both /bin and /xbin so I don't understand how it can not function.
Edit: ok, got it, the su binary has -rwsr-sr-x and the owner is root so random users cannot execute it. I also cannot change the permissions so I probably have to root again and figure out a way to keep the root after a factory reset. It makes sense to install BMM since it can take care of permissions.