Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Ace The Creator said:
Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Click to expand...
Click to collapse
You will need to boot into recovery and wipe everything except internal SD and factory reset. Surge has a thread here http://forum.xda-developers.com/showthread.php?t=2578209 with all of the ODIN files you will need. I'm not sure what you mean by "tried to reinstall normal stock with ODIN". Do you mean the ODIN flash failed or that the flash worked but you are still unable to access your phone?
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
Ace The Creator said:
Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Click to expand...
Click to collapse
This process worked for me in the past also. Wipe/factory reset and then start from scratch. http://forum.xda-developers.com/showthread.php?t=2763834
liljoe727 said:
You will need to boot into recovery and wipe everything except internal SD and factory reset. Surge has a thread here http://forum.xda-developers.com/showthread.php?t=2578209 with all of the ODIN files you will need. I'm not sure what you mean by "tried to reinstall normal stock with ODIN". Do you mean the ODIN flash failed or that the flash worked but you are still unable to access your phone?
Click to expand...
Click to collapse
Thanks for the reply!!!
How do I do that? I just go into the recovery and choose the wipe data option? And I only have the standard android recovery. I dont have SS or TWRP or CWM installed atm
And yeah Odin Flash failed. But I didnt use the MK2 files though. I used the NC5 files. Im not sure if that could be the issue but I'll give it a try.
Ace The Creator said:
Thanks for the reply!!!
How do I do that? I just go into the recovery and choose the wipe data option? And I only have the standard android recovery. I dont have SS or TWRP or CWM installed atm
And yeah Odin Flash failed. But I didnt use the MK2 files though. I used the NC5 files. Im not sure if that could be the issue but I'll give it a try.
Click to expand...
Click to collapse
Yes, boot into normal recovery and wipe data/cache/dalvik/factory reset then try the ODIN flash. You can try the full wipe method to get back to NC5 right away but you may need to start at MK2.
liljoe727 said:
Yes, boot into normal recovery and wipe data/cache/dalvik/factory reset then try the ODIN flash. You can try the full wipe method to get back to NC5 right away but you may need to start at MK2.
Click to expand...
Click to collapse
Alright. But it only shows wipe data/factory reset.
I assume this is it though.
Again thanks for the help!
Ace The Creator said:
Alright. But it only shows wipe data/factory reset.
I assume this is it though.
Again thanks for the help!
Click to expand...
Click to collapse
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
liljoe727 said:
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
Click to expand...
Click to collapse
Im gonna give it a go after the files finish downloading. Hope this works!
Im glad theres people like you in this community. In the PS3 community everyone is to them selves :\
liljoe727 said:
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
Click to expand...
Click to collapse
It didnt work
I followed TheTechGuys method and I failed on both attempts .
What am I supposed to do?
I followed it and when it says it fails its completely normal then when I put in the other tar and uncheck the re partition box it still fails me.
What should I do?
Ace The Creator said:
It didnt work
I followed TheTechGuys method and I failed on both attempts .
What am I supposed to do?
I followed it and when it says it fails its completely normal then when I put in the other tar and uncheck the re partition box it still fails me.
What should I do?
Click to expand...
Click to collapse
Did you try the "Full Wipe AKA Emergency" on the first thread I linked to by Surge?
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
Did you try the "Full Wipe AKA Emergency" on the first thread I linked to by Surge?
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
Yeah I did. Im now stuck with the firmware upgrade encountered an issue error.
What do I do now?
Ace The Creator said:
Yeah I did. Im now stuck with the firmware upgrade encountered an issue error.
What do I do now?
Click to expand...
Click to collapse
The only thing that has ever worked for me when I see that screen is to try to install firmware through KIES it will fail but it seems like it puts some sort of driver on your phone that allows ODIN to work. That may make no sense but I have gotten that stupid yellow triangle twice and KIES and then following the instructions, to the letter,on TechGuys thread worked both times.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
The only thing that has ever worked for me when I see that screen is to try to install firmware through KIES it will fail but it seems like it puts some sort of driver on your phone that allows ODIN to work. That may make no sense but I have gotten that stupid yellow triangle twice and KIES and then following the instructions, to the letter,on TechGuys thread worked both times.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Ace The Creator said:
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Click to expand...
Click to collapse
If you are doing everything correctly on your end, I do not know why none of these methods are working for you. They have worked for me in the past. The only other thing I can point you to is this video https://www.youtube.com/watch?v=GL8XwuRYoWU&feature=youtu.be which is step by step instruction on how to use the method on Surges thread.
---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM ----------
Ace The Creator said:
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Click to expand...
Click to collapse
Did you try using a different USB cable? That may be the issue.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
If you are doing everything correctly on your end, I do not know why none of these methods are working for you. They have worked for me in the past. The only other thing I can point you to is this video https://www.youtube.com/watch?v=GL8XwuRYoWU&feature=youtu.be which is step by step instruction on how to use the method on Surges thread.
---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM ----------
Did you try using a different USB cable? That may be the issue.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
I can try using another one. The original one that I had stopped working so I've been using another.
Related
Alright guys as my title states I pulled a "noob move" and it looks like I've soft bricked my phone (It won't boot past the verizon splash screen). I've done a little research and I'm pretty familiar with Odin and how it works. Seems to be the same concept as jungle flasher and I've modded a few 360's in my time. I've tried, to no avail, to flash my phone back with the stock image numerous times and I figured it was time to consult the experts. What I've done so far: Downloaded the factory stock restore TAR from Rwilco12's site and put that in the PDA file browser of Odin. My phone shows up in Odin when connected in download mode with a light blue com:4 box. I read sometimes this is supposed to be yellow? Other versions of Odin it is yellow. This instance was attempted in 3.07. 1.85 it shows up as yellow. Regardless of either version, they both fail after the "aboot" step. I've tried two computers and have failed miserably all morning. Any help or advice would be much appreciated.
-Be easy on me, it's my first time.
-HerdOn
HerdOn said:
Alright guys as my title states I pulled a "noob move" and it looks like I've soft bricked my phone (It won't boot past the verizon splash screen). I've done a little research and I'm pretty familiar with Odin and how it works. Seems to be the same concept as jungle flasher and I've modded a few 360's in my time. I've tried, to no avail, to flash my phone back with the stock image numerous times and I figured it was time to consult the experts. What I've done so far: Downloaded the factory stock restore TAR from Rwilco12's site and put that in the PDA file browser of Odin. My phone shows up in Odin when connected in download mode with a light blue com:4 box. I read sometimes this is supposed to be yellow? Other versions of Odin it is yellow. This instance was attempted in 3.07. 1.85 it shows up as yellow. Regardless of either version, they both fail after the "aboot" step. I've tried two computers and have failed miserably all morning. Any help or advice would be much appreciated.
-Be easy on me, it's my first time.
-HerdOn
Click to expand...
Click to collapse
Have you tried a different USB cable and/or running odin as an administrator?
BladeRunner said:
Have you tried a different USB cable and/or running odin as an administrator?
Click to expand...
Click to collapse
Yes, I've used the factory samsung and another cable while running as an administrator. Thanks for the thought though!
HerdOn said:
Yes, I've used the factory samsung and another cable while running as an administrator. Thanks for the thought though!
Click to expand...
Click to collapse
which Verizon release are you on VRUAMDK or VRUAME7?
BladeRunner said:
which Verizon release are you on VRUAMDK or ?
Click to expand...
Click to collapse
VRUAME7 is the most recent with the latest OTA update correct? If so that's the one I was on. Now I did root it successfully initially, it got stuck this way after installing SuperSU... I guess I should have said that initially. My apologies.
HerdOn said:
VRUAME7 is the most recent with the latest OTA update correct? If so that's the one I was on. Now I did root it successfully initially, it got stuck this way after installing SuperSU... I guess I should have said that initially. My apologies.
Click to expand...
Click to collapse
ME7 is the current OTA, yes. Are you using the correct .TAR file from here? http://www.androidfilehost.com/?fid=23032113221600748? Also did you try doing a data wipe/factory reset in stock android recovery?
BladeRunner said:
ME7 is the current OTA, yes. Are you using the correct .TAR file from here? Also did you try doing a data wipe/factory reset in stock android recovery?
Click to expand...
Click to collapse
The link you sent was broken, I'm using the rwilco12 factory image. It wont let me post a link because I don't have enough posts.
I have tried doing the data wipe/factory reset but it kept saying error. and now it says Firmware upgrade encountered an issue please select recovery mode in kies and try again. That's when going to the volume up "recovery" mode. Volume down, "download" mode still works fine.
http://www.androidfilehost.com/?fid=23032113221600748
The link BladeRunner posted had an extra question mark. Try that one.
Sent from my SCH-I545 using xda app-developers app
HerdOn said:
The link you sent was broken, I'm using the rwilco12 factory image. It wont let me post a link because I don't have enough posts.
I have tried doing the data wipe/factory reset but it kept saying error. and now it says Firmware upgrade encountered an issue please select recovery mode in kies and try again. That's when going to the volume up "recovery" mode. Volume down, "download" mode still works fine.
Click to expand...
Click to collapse
sorry, here is the link to the Odin files thread: http://forum.xda-developers.com/showthread.php?t=2301259 Download the VRAUME7 factory image. I'm not sure but I think you may have the MDK image from RWILCO and there's no going back to that once you've updated to ME7.
---------- Post added at 02:26 PM ---------- Previous post was at 02:25 PM ----------
Checkm8 said:
http://www.androidfilehost.com/?fid=23032113221600748
The link BladeRunner posted had an extra question mark. Try that one.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Thanks! Don't know where that extra "?" came from
Alright I'm downloading that version now. Its capping my connection so it should be done in 25 mins and we'll try again! Thanks for your help so far bladerunner. Seems like we're getting somewhere...
Bladerunner, you were right my friend! The image is finally going to the phone. After nearly pulling all of my hair out, we're making extreme progress!
Ten minutes later my phone is back to factory flawless condition. Thanks Bladerunner for all your help! It's very much appreciated..
HerdOn said:
Ten minutes later my phone is back to factory flawless condition. Thanks Bladerunner for all your help! It's very much appreciated..
Click to expand...
Click to collapse
Excellent! No problem
I was trying to flash an updated version of the ROM i had, but a verizon message came up, essentially telling me my bootloader was still locked. I looked it up, and the fix is supposedly flashing it back to stock, which I tried, but it has no internet connection (wifi or service) and it loaded the ROM i had been trying to install earlier.
I double checked my model number, to see if that did anything, and it's changed from what it was when I flashed the first ROM, so i tried flashing the firmware for that model, but Odin just gives me a fail message for that, so i can get my ROM to run, but my internet is borked, and I can't get it back to stock to see if that fixes it.
Because I can't get internet access it's screwing up a lot of my attempts to fix it, and my computer refuses to read it, so I can't do anything from that end.
Also, while my WiFi refuses to turn on (switch pops back to grey after trying to turn it on) my service bars act like they're receiving, changing up and down, but they're greyed out and the carrier name is 'Empty'.
NickBroomfield said:
I was trying to flash an updated version of the ROM i had, but a verizon message came up, essentially telling me my bootloader was still locked. I looked it up, and the fix is supposedly flashing it back to stock, which I tried, but it has no internet connection (wifi or service) and it loaded the ROM i had been trying to install earlier.
I double checked my model number, to see if that did anything, and it's changed from what it was when I flashed the first ROM, so i tried flashing the firmware for that model, but Odin just gives me a fail message for that, so i can get my ROM to run, but my internet is borked, and I can't get it back to stock to see if that fixes it.
Because I can't get internet access it's screwing up a lot of my attempts to fix it, and my computer refuses to read it, so I can't do anything from that end.
Also, while my WiFi refuses to turn on (switch pops back to grey after trying to turn it on) my service bars act like they're receiving, changing up and down, but they're greyed out and the carrier name is 'Empty'.
Click to expand...
Click to collapse
Going to need more info.
What is your original build?
What rom were you trying to flash?
How are you trying to flash it?
etc..........
Sent from my NCC-1701 using Tapatalk 4
riker147 said:
Going to need more info.
What is your original build?
What rom were you trying to flash?
How are you trying to flash it?
etc..........
Click to expand...
Click to collapse
Original Build: if you mean what I was using before flash, I can't find the link to it, it was one of the first stock android ROMs for the GS4. If you mean prior to that, it was the standard Samsung TouchWiz the GS4 comes with.
I was trying to flash the ROM found here: http://forum.xda-developers.com/showthread.php?t=2340783
I flashed it using TWRP > wipe data/cache, factory reset > install zip > wipe dalvik cache > boot. When that didn't seem to work, I tried flashing stock using Odin, as I can't get the zips onto my phone now.
NickBroomfield said:
Original Build: if you mean what I was using before flash, I can't find the link to it, it was one of the first stock android ROMs for the GS4. If you mean prior to that, it was the standard Samsung TouchWiz the GS4 comes with.
I was trying to flash the ROM found here: http://forum.xda-developers.com/showthread.php?t=2340783
I flashed it using TWRP > wipe data/cache, factory reset > install zip > wipe dalvik cache > boot. When that didn't seem to work, I tried flashing stock using Odin, as I can't get the zips onto my phone now.
Click to expand...
Click to collapse
I mean the last official build the phone was on before you started flashing. (MDK, ME7, MI1, MJ7 or MK2)
Did you ever take any OTA's?
When you say TWRP, do you mean TWRP with Safestrap or just TWRP?
riker147 said:
I mean the last official build the phone was on before you started flashing. (MDK, ME7, MI1, MJ7 or MK2)
Did you ever take any OTA's?
When you say TWRP, do you mean TWRP with Safestrap or just TWRP?
Click to expand...
Click to collapse
Erm, I believe it was MDK, but I'm not certain, and I wouldn't know how to go about checking that retroactively if I could.
I didn't knowingly take any OTA's
Just TWRP.
NickBroomfield said:
Erm, I believe it was MDK, but I'm not certain, and I wouldn't know how to go about checking that retroactively if I could.
I didn't knowingly take any OTA's
Just TWRP.
Click to expand...
Click to collapse
OK so if your phone was running Twrp, and not SafeStrap twrp, we can then probably assume your phone was on MDK.
What tar file did you use to Odin?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK so if your phone was running Twrp, and not SafeStrap twrp, we can then probably assume your phone was on MDK.
What tar file did you use to Odin?
Click to expand...
Click to collapse
I don't know what you want exactly, the name of the file I tried to use to flash back to stock is 'SCH-I545_MD2_423399_Kernel.tar', I can't link because xda says I can't link outside sources until 10 posts, and I'm a tad new.
NickBroomfield said:
I don't know what you want exactly, the name of the file I tried to use to flash back to stock is 'SCH-I545_MD2_423399_Kernel.tar', I can't link because xda says I can't link outside sources until 10 posts, and I'm a tad new.
Click to expand...
Click to collapse
OK so that looks like the pre release kernel and not the stock firmware file. So that may explain why you're having issues still.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 12:34 AM ---------- Previous post was at 12:32 AM ----------
You need to go here
http://forum.xda-developers.com/showthread.php?t=2289325
Click the link in that op then click on the TAR folder once your on that site it sends you to.
That's the mdk stock firmware
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK so that looks like the pre release kernel and not the stock firmware file. So that may explain why you're having issues still.
Click to expand...
Click to collapse
Oh, I did flash this 'SCH-I545_MDK_562219_Kernel.tar' afterwards, which didn't make anything better or worse.
NickBroomfield said:
Oh, I did flash this 'SCH-I545_MDK_562219_Kernel.tar' afterwards, which didn't make anything better or worse.
Click to expand...
Click to collapse
Those files youve been mentioning are from here
http://forum.xda-developers.com/showthread.php?t=2290798
Those are needed to r
ROOT the phone AFTER you flash the stock firmware I linked you to.
So am I confused here or are you trying to get it back to stock MDK....or just trying to root the phone?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Those files youve been mentioning are from here
http://forum.xda-developers.com/showthread.php?t=2290798
Those are needed to r
ROOT the phone AFTER you flash the stock firmware I linked you to.
So am I confused here or are you trying to get it back to stock MDK....or just trying to root the phone?
Click to expand...
Click to collapse
Oh, that might be why I'm having problems. You're not confused, I just probably shouldn't be doing this on my own.
NickBroomfield said:
Oh, that might be why I'm having problems. You're not confused, I just probably shouldn't be doing this on my own.
Click to expand...
Click to collapse
Tell you what... Go to this thread
http://forum.xda-developers.com/showthread.php?t=2301259
It has a very nice set of instructions that the first one I linked you to doesn't.
That links you to the no wipe MDK tar file. You should be OK to use that one.
Very important that you use the MDK file and not one of the others as those will lock your phone back up and no more custom recovery for you.
Its fairly easy. Let me know how I can help
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:05 AM ---------- Previous post was at 12:59 AM ----------
I'm hitting the hay ... Good luck with that.
If you run into problems with the no wipe tar files in the second link go and download the mdk tar file from
http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR
And try that.
Make sure you're using a good USB cable as well.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Tell you what... Go to this thread
http://forum.xda-developers.com/showthread.php?t=2301259
It has a very nice set of instructions that the first one I linked you to doesn't.
That links you to the no wipe MDK tar file. You should be OK to use that one.
Very important that you use the MDK file and not one of the others as those will lock your phone back up and no more custom recovery for you.
Its fairly easy. Let me know how I can help
Click to expand...
Click to collapse
I got my phone back to stock, made sure my internet was working, rooted it, installed TWRP, and everything worked fine, but I have a question that might be a bit out of the bounds of this post. When I tried to use TWRP to flash stock android onto it I get the message "Verizon has detected unauthorized software [etc]". This is linked to the bootloader, if I recall correctly, but I can't find some really good help with it.
Further help would appreciated, but what you've done already has helped me far more than I had hoped when I posted, so thank you, oh so much.
NickBroomfield said:
When I tried to use TWRP to flash stock android onto it I get the message "Verizon has detected unauthorized software.
Click to expand...
Click to collapse
Ok so you're in TWRP and what file are you trying to flash exactly??
We use Odin to flash stock firmwares. And devs do make"stock ROMs" that can be flashed in twrp...so really I need to know what it isv exactly you're trying to do...
Again
What file and what steps you're taking and then I can help more
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Ok so you're in TWRP and what file are you trying to flash exactly??
We use Odin to flash stock firmwares. And devs do make"stock ROMs" that can be flashed in twrp...so really I need to know what it isv exactly you're trying to do...
Again
What file and what steps you're taking and then I can help more
Click to expand...
Click to collapse
In TWRP, trying to flash the ROM I linked in my second post: http://forum.xda-developers.com/showthread.php?t=2340783
As for steps: I boot into TWRP > factory reset > wipe Dalvik > Install zip (for the ROM and GApps) > Wipe Dalvik > reboot system.
NickBroomfield said:
In TWRP, trying to flash the ROM I linked in my second post: http://forum.xda-developers.com/showthread.php?t=2340783
As for steps: I boot into TWRP > factory reset > wipe Dalvik > Install zip (for the ROM and GApps) > Wipe Dalvik > reboot system.
Click to expand...
Click to collapse
Ok from I saw in that post that ROM is for the i9505 S4 I believe, which is the international version of our phone.
Try downloading this one
http://forum.xda-developers.com/showthread.php?t=2384362
It's a stock ROM based off our Verizon S4
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Ok from I saw in that post that ROM is for the i9505 S4 I believe, which is the international version of our phone.
Try downloading this one
http://forum.xda-developers.com/showthread.php?t=2384362
It's a stock ROM based off our Verizon S4
Click to expand...
Click to collapse
His post currently says 'uploading' under downloads, so for now, after I get it, my process is correct, right? Just the wrong software? Or is there a problem with what I'm doing as well?
NickBroomfield said:
His post currently says 'uploading' under downloads, so for now, after I get it, my process is correct, right? Just the wrong software? Or is there a problem with what I'm doing as well?
Click to expand...
Click to collapse
OK . no you're process is ok.
Try looking here for another ROM
http://forum.xda-developers.com/galaxy-s4-verizon/development
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:51 AM ---------- Previous post was at 03:50 AM ----------
Or look here for aosp ROMs
http://forum.xda-developers.com/galaxy-s4-verizon/orig-development
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
I'm not sure what state your phone is in now however. You may have to Odin back to stock mdk then reroot and install twrp again. What is your phone doing now? Can still get into recovery
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK . no you're process is ok.
Try looking here for another ROM
http://forum.xda-developers.com/galaxy-s4-verizon/development
Or look here for aosp ROMs
http://forum.xda-developers.com/galaxy-s4-verizon/orig-development
Click to expand...
Click to collapse
So just any ROM?
Mistertac said:
I'm not sure what state your phone is in now however. You may have to Odin back to stock mdk then reroot and install twrp again. What is your phone doing now? Can still get into recovery
Click to expand...
Click to collapse
I already flashed to stock/rerooted/reinstalled twrp, previously it was giving me the error "Verizon has encountered unauthorized software on this device, please turn off your phone and take it to the nearest store" or something along those lines.
newb question: what does AOSP stand for?
NickBroomfield said:
So just any ROM?
I already flashed to stock/rerooted/reinstalled twrp, previously it was giving me the error "Verizon has encountered unauthorized software on this device, please turn off your phone and take it to the nearest store" or something along those lines.
newb question: what does AOSP stand for?
Click to expand...
Click to collapse
AndroidOpenSourceProject
And yea those two links I sent you are for our Verizon s4. You an install any ROM from either one of those forums, just read the posts and follow the devs directions and you're Golden
Sent from my SCH-I545 using Tapatalk
Hello everyone,
I've looked through the forums and I haven't found a good way to unbrick my Verizon Galaxy S4. What happened I think was that I already had safestrap recovery installed and I tried to install a different recovery without first uninstalling safestrap. Anyway, the phone won't boot up normally now. It goes into download mode first. And now, it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Kies doesn't even recognize the phone so that is not an option.
I have tried to flash a stock image with Odin, but every single time I get a "fail". I've tried multiple version of Odin, including 3.09 but I haven't had success yet.
Could anyone help me get my phone working again?
Thanks.
jrodefeld said:
Hello everyone,
I've looked through the forums and I haven't found a good way to unbrick my Verizon Galaxy S4. What happened I think was that I already had safestrap recovery installed and I tried to install a different recovery without first uninstalling safestrap. Anyway, the phone won't boot up normally now. It goes into download mode first. And now, it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Kies doesn't even recognize the phone so that is not an option.
I have tried to flash a stock image with Odin, but every single time I get a "fail". I've tried multiple version of Odin, including 3.09 but I haven't had success yet.
Could anyone help me get my phone working again?
Thanks.[/QUOT
There is an option in kise to re install the driver see if that helps
Click to expand...
Click to collapse
Can't install any other recovery ...Also try a different computer sometimes help...
sent by baja kitkat S4
jrodefeld said:
Hello everyone,
I've looked through the forums and I haven't found a good way to unbrick my Verizon Galaxy S4. What happened I think was that I already had safestrap recovery installed and I tried to install a different recovery without first uninstalling safestrap. Anyway, the phone won't boot up normally now. It goes into download mode first. And now, it says "firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Kies doesn't even recognize the phone so that is not an option.
I have tried to flash a stock image with Odin, but every single time I get a "fail". I've tried multiple version of Odin, including 3.09 but I haven't had success yet.
Could anyone help me get my phone working again?
Thanks.
Click to expand...
Click to collapse
What build is your phone on and what Odin file did you try?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
What build is your phone on and what Odin file did you try?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I'm not sure of the build, but I tried both files in this link:
http://forum.xda-developers.com/showthread.php?t=2578209
I've tried others but I believe the ones above should work? I still get a "fail" every time I try to flash them. I've had this error before but I cannot remember how I got it to work.
jrodefeld said:
I'm not sure of the build, but I tried both files in this link:
http://forum.xda-developers.com/showthread.php?t=2578209
I've tried others but I believe the ones above should work? I still get a "fail" every time I try to flash them. I've had this error before but I cannot remember how I got it to work.
Click to expand...
Click to collapse
Any chance you can post the screen of the Odin fail error or tell us where it's failing?
Side from that idk... Odin is seeing your phone so not the drivers. I'd say try the MK2 file and you could also try putting the PIT file from that thread in Odin along with the tar just to try it in the mean time.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
Also... You think you had SS on your phone? But not sure?, there's a chance your phone is on NC5 Kit Kat and that's why MK2 won't work but really we need more details before going that route.
Sent from my SCH-I545 using Tapatalk
"Firmware Upgrade Encountered an Issue" "Device not responding" Samsung Kies
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Bumping for others to hopefully see... I've still made no progress and am in the same situation and simply can't find what I need to do.
What build were you on before you started? What file are you trying to flash with Odin?
Jmick363 said:
I tried to flash an Android 5.0 ROM earlier, and my phone was only booting to the stock recovery (Safestrap was installed but I did a factory reset). Now, if the phone was turned off by removing the battery, it won't turn on when I hold the power button, or attempt to go into download/recovery mode. Nothing happens. If I plug it in, I can use whatever button combinations as normal. However, I don't think I can get to recovery mode. Both volume down/power and volume down/power/home enter download mode to the phone. I tried to flash a stock ROM in Odin, but it failed. Otherwise, it shows a screen that says " Firmware Upgrade encountered an issue. Please select recovery mode in kies and try again" And when I open kies, it just says "connecting" for an extremely long time until it eventually says "Device not responding" and I can't do anything. What do I have to do to fix this? I can't find anything for this phone that has had this problem or knows how to fix it. I've tried a few different things so far but flashing nothing in odin has worked. Any help is appreciated, thanks in advance.
Click to expand...
Click to collapse
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Hightower24 said:
Here's the issue: since you have safestrap installed that means you're on the new bootloader. We cannot install anything other than TW based roms from nothing newer than nc5 base. If you can get into download mode, you'll need to flash the full wipe nc5 tar file through Odin. That will get you back on stock and you can re-root from there.
Click to expand...
Click to collapse
Crap. You're right. I completely forgot about that last night. I was getting frustrated with Hyperdrive because when I was trying to install version 20, the WiFi would never work no matter which modules.zip I flashed.
I got fed up and just wanted to flash something else and I did this without even thinking about it... I can get the phone into download mode, but when I try to flash this in odin, it fails.
I saw someone with the same screen as me with a Note 2 and someone said something about flashing a PIT file or something like that? I think I'm going to look into that next, hopefully I can find some useful links.
riker147 said:
What build were you on before you started? What file are you trying to flash with Odin?
Click to expand...
Click to collapse
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Jmick363 said:
Sorry I didn't see this post at first. The file I'm using in Odin is mentioned in the above post. Before I had done anything, I was successfully using Hyperdrive 17.something. I did a factory reset, flashed the Hyperdrive 20 rom, flashed the modules.zip (I used like 3 or 4 different ones and none of them got WiFi to work) and rebooted and let the phone sit for 10 minutes, and when I would try to toggle WiFi, it wouldn't work. To make things worse, every time, when I rebooted, SafeStrap wouldn't load. So I had to go back to the ROM and install Towelroot and root the phone again, then install safestrap and install the recovery again and then I could boot to it. But I could never get the WiFi to work a single time.
Click to expand...
Click to collapse
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Hightower24 said:
Use this wifi fix module. It works best for me:
https://www.androidfilehost.com/?fid=23487008491963696
Click to expand...
Click to collapse
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Jmick363 said:
Thanks for this, but right now I need to be more concerned with actually getting to Safestrap... or stock touchwiz for that matter. Hopefully this will work if I manage to fix the phone.
Click to expand...
Click to collapse
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Hightower24 said:
My bad. Here's a link to the tar files. I suggest using the full wipe nc5:
http://forum.xda-developers.com/showthread.php?t=2735172
Click to expand...
Click to collapse
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Jmick363 said:
Using the Full Wipe method on that link, I was able to resolve the problem and at least get back to a working phone. From here I'll use towelroot to root and install safestrap and then install hyperdrive 20 with those modules you linked. To be more specific for anyone reading years from now with the same problem as me, I used odin 1.85 (though many versions work) with the pit file provided from that link with "re=partition, auto reboot and f. reset time" checked in the options. At first, I was having some trouble, but I think it was because the phone had low battery. I plugged it in for a bit, booted it up, and am setting it up right now. Thanks for the help everyone, it's much appreciated. I very much hope that the modules you linked work for me, because if they don't, I have no idea what ROM to use.
I was reading a thread last night where someone listed all of the ROMS working with SafeStrap, but it was from like 2 years ago and almost all of the ROMs had been abandoned.... Is there a more updated list of options? Or just something to look for to make sure a ROM will work right away?
Click to expand...
Click to collapse
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
So right now things aren't going as smoothly as I would've hoped.... The first time I flashed Hyperdrive and then that modules zip you linked, and the phone got stuck on the Samsung custom screen in some sort of loop. I reset it with odin and just the PDA from the link from before, and I then installed towelroot and safestrap again then flashed hyperdrive and modules and now I'm stuck on the hyperdrive red screen... It's just the boot animation and nothing else. When I take out the battery, the power button does nothing if the phone is not plugged in. When I plug the phone in and hold down the power button, it just shows an empty battery with a loading icon in the middle. I can't do anything else.... I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Jmick363 said:
I'm going to reset it again now and maybe try installing this echoe rom.... Are you talking about this?
Click to expand...
Click to collapse
Hightower24 said:
Hyperdrive and echoerom seem to be the most talked about. I'm running echoe v39.1
Click to expand...
Click to collapse
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Jmick363 said:
With EchoeRom, where do I find the signal bar fix? Is the wifi fix the thing you linked already? or is it separate from modules zip?
Click to expand...
Click to collapse
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Hightower24 said:
Sorry! I had started this reply earlier in the morning then got busy with work. The link for the signal bar fix is in the OP from the forum you found by jds. It's down by the link for v26. I sent you the wifi fix that works for me. If you're going to use v39.1, you will need jrkruse's nk2 patch found here:
http://forum.xda-developers.com/showthread.php?t=2674280
The echoe site is here:
http://echoerom.com/roms/echoefull/s4/i9505/
Flash in this order:
Rom
Nk2 patch (not needed for v29/29.1)
Signal bar fix
WiFi fix
Updated supersu.zip (optional)
Be sure to verify the md5 of the downloads. Good luck!
Click to expand...
Click to collapse
No need to apologize!! Your job isn't to monitor me, and I can't thank you enough for all the help. I'm going to give this a shot at some point today, hopefully it'll work. I'll comment back in the thread whatever happens... As you can probably tell, I typically have horrible luck with these things.
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
madhavok09 said:
So I have had the same issue as the OP after trying to flash to a 5.0 ROM, but my issue is still ongoing, as when I try to flash the stock ROM from this link I get the error that it failed in Odin.
Click to expand...
Click to collapse
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
riker147 said:
Are you flashing the full wipe? Good download? Check MD5? Using the cable that came with the phone? Try a different USB port?
Sent from my NCC-1701 using Tapatalk.
Click to expand...
Click to collapse
Well the OP said he did the wipe with that link I listed, and I would assume it's a good link. I am flashing the full wipe with the PIT file, using the cable that came with the phone, and I have tried using a different USB port. I have tried 3 different MD5 files as well and still have had no luck.
Edit (2:13 PM Eastern): Had the wrong file after some digging, and got the NC5 instead of the MK2. Phone is booting normally. Thanks for the help.
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening