Help guys, my o+ 8.31 is not turning on, when I connect the charger the phone not chargin even when i connect it on computer still nothing happen, and no device showing on the computer. The key combination(volume + power button) is not working. I think my phone is Hard Brick. Theres any other solution except using USB JIG or JTAG?. Please help me. Sorry for my bad english.
Up Up. Please
Related
Hi,
So, I somehow manage to break the button key (it's dead, I also opened the device and there is nothing to fix this), and the device is off, and I'm looking for a way to turn it on without the power key.
I tried to insert the battery while the phone is plugged but it won't help. I also tried to start it from the ADB but for some reason the computer don't read the phone (even in download mode).
What I think might help is to install any rom/kernel that turn on when the phone is plugged to the charger, if you know one that can be installed through the ODIN it might be helpfull.
Any other solution that will work will be good
Thanks
I have xperia neo L and it stopped working it won't turn on... Here are the simptoms, when i press power button it vibrates and nothing else... Display won't turn on there are no sounds nothing... When i put it to charger if battery is low it shows orange light and when it charges it goes green... I tried seus and it completely reinstalls the software and same thing happens... Tried flashtool and all versions of stock roms same thing...
It goes to flash mode when i press back button and connect it to usb and it flashes phone succesfully and nothing... When i disconect phone and connect it again Flashtool sais that device is connected with usb debbuging off... So it detects phone... I even tried for fun to connect device without pressing power button, i connected it to usb then pressed home button and it installed as mass storage device, i'll place screenshots... I thought first maybe display is broken but it isn't... When i put sim card in phone and turn it on i'm always unavailable... Don't know what to do next? Any advices? Exept from thaking it to service, i will do that eventually but for few more days i want to tray fixing it myself... I would appreciate any advice... Thnx guys
Keep the device fully charged and try seus..Then again pin in charger only then after switch on. It may work
So i bought phone yersterday, and today i connected phone via usb to pc and i.. formated something, some pop-ups with formating g: i formated it accidently, but i was fast enought to see that i formatted something that was only 20Kb.. and when i did it.. i cant turn the phone. nothing working, tryed remove battery, holding power on button without battery. No sign of life, screen black... it just dont work , just like it were without battery. But when i connect usb my pc shows Udentified device and tryes download drivers for it and then fails.. Charging not work too. Cant enter Cwm too. Phone even don't vibrate when holding power button..
Maybe someone knows what the heck just happened??
please...
I want to install a downgrade 4.4 to 4.3. I downloaded official Firmware. But after flashing i was bricked.
258 Euros are gone. I know what i was doing.
Please help me! (( :crying::crying::crying:
How bricked is it? Can you still get into recovery? Can you at least still turn it off and on?
8080-f dead as a dodo
Hi... just came across this post and searched hi and low through all forum looking for help... I too have a yoga tab bricked, B8080-f model. The only thing it can do is connect as an unknown usb device .. or if you hold power for a minute whilst usb is plugged in... (wait for it to switch off) then unplug usb lead and plug it in again whilst holding volume up Im able to get the quallcomm emergeny port loaded 9008 on com 4.... it wont switch on... wont show the power led when plugged in... its just blank... tried holding power for 60+ seconds as someone said would exit out of meta state or something?? .... its kaput.... all i remember doing is trying to run an update over ota... it found it then dloaded it and rebooted... when installing it failed ... i dloaded a qsb update file and put in sdfuse folder....installed by pressing down volume and holding power to get into lenovo recovery partition and updated that way... once rebooted it never switched on, charged?!?!
Any help would be greatly appreciated...
afaik i just need a factory rom to flash using miflash or emmc??
hi there
really not to sure the past of the phone , but 99% that no custom rom was used in the phone, why i am saying that it is hard bricked? because when i connect to computer it founds a device as
(QHSUSB_BULK) i searched in the internet about it but seems to be it is not possible to unbrick it , but maybe i am wrong,
i can not access recovery mode by pressing power + volume down
the led blinks once when i connect the phone to pc
is there any way to wake it up or its dead phone /??/
many thanks
gugutm
no one can help me please
I am also having same problem but don't know how to wake screen ??