hi there
really not to sure the past of the phone , but 99% that no custom rom was used in the phone, why i am saying that it is hard bricked? because when i connect to computer it founds a device as
(QHSUSB_BULK) i searched in the internet about it but seems to be it is not possible to unbrick it , but maybe i am wrong,
i can not access recovery mode by pressing power + volume down
the led blinks once when i connect the phone to pc
is there any way to wake it up or its dead phone /??/
many thanks
gugutm
no one can help me please
I am also having same problem but don't know how to wake screen ??
Related
Hi Guys, greetings from India!
I have a E970 which I unfortunately bricked ( in what seems to be a hard brick) during flashing an updated ROM. The phone screen now does not turn on at all, though when I connect it to my computer the power button led flickers on and off, and the PC responds as if a removable device is getting attached to it and being removed in quick succession.
In Device Manager I can see that the phone gets recognized as QHUSB_DLOAD.
When I tried to run the unbrick process via LGNPST, the phone name flashes along with the COM port name in the software, then disappears, and then comes back again. Moreover, the process errors out at 85% but pressing the power button does nothing.
Since the screen does not turn on, I am not sure whether my phone goes into a download mode or not.
So - is the phone recoverable at all or is it all over? Please help.
Thank you.
Chironx2012 said:
Hi Guys, greetings from India!
I have a E970 which I unfortunately bricked ( in what seems to be a hard brick) during flashing an updated ROM. The phone screen now does not turn on at all, though when I connect it to my computer the power button led flickers on and off, and the PC responds as if a removable device is getting attached to it and being removed in quick succession.
In Device Manager I can see that the phone gets recognized as QHUSB_DLOAD.
When I tried to run the unbrick process via LGNPST, the phone name flashes along with the COM port name in the software, then disappears, and then comes back again. Moreover, the process errors out at 85% but pressing the power button does nothing.
Since the screen does not turn on, I am not sure whether my phone goes into a download mode or not.
So - is the phone recoverable at all or is it all over? Please help.
Thank you.
Click to expand...
Click to collapse
If device mgr is seeing the phone as qhusb, you done did bricked your phone. You need to jtag it to fix it. Your best bet would be to look into this... http://mobiletechvideos.mybigcommerce.com/lg-optimus-g-jtag-brick-repair/
Help guys, my o+ 8.31 is not turning on, when I connect the charger the phone not chargin even when i connect it on computer still nothing happen, and no device showing on the computer. The key combination(volume + power button) is not working. I think my phone is Hard Brick. Theres any other solution except using USB JIG or JTAG?. Please help me. Sorry for my bad english.
Up Up. Please
I want to install a downgrade 4.4 to 4.3. I downloaded official Firmware. But after flashing i was bricked.
258 Euros are gone. I know what i was doing.
Please help me! (( :crying::crying::crying:
How bricked is it? Can you still get into recovery? Can you at least still turn it off and on?
8080-f dead as a dodo
Hi... just came across this post and searched hi and low through all forum looking for help... I too have a yoga tab bricked, B8080-f model. The only thing it can do is connect as an unknown usb device .. or if you hold power for a minute whilst usb is plugged in... (wait for it to switch off) then unplug usb lead and plug it in again whilst holding volume up Im able to get the quallcomm emergeny port loaded 9008 on com 4.... it wont switch on... wont show the power led when plugged in... its just blank... tried holding power for 60+ seconds as someone said would exit out of meta state or something?? .... its kaput.... all i remember doing is trying to run an update over ota... it found it then dloaded it and rebooted... when installing it failed ... i dloaded a qsb update file and put in sdfuse folder....installed by pressing down volume and holding power to get into lenovo recovery partition and updated that way... once rebooted it never switched on, charged?!?!
Any help would be greatly appreciated...
afaik i just need a factory rom to flash using miflash or emmc??
Hello
I have been a problem with my phone , so after hardereset to change to a newer android, phone turned off and since then does not respond to anything . I tried to turn it on , pushing even combinations volume down + power . None of these methods did not work when I connect it to a computer, the computer does not detect it, and hear the sound of failure to connect the device. I do not know what to do with it . Please help!
My model is: LG L9 II
hi so recently my my phone was set in a hard brick mode with no screen turning on and the like. I managed to find a firmware for the T03 that sets it back and allows the bootloader and stuff and now it turns on but sadly i cant do the Volume up and power and the stupid volume down and power reset eMMC does nothing for me. Sadly i cant find working usb drivers for this stupid phone since everytime i plug it in while it's offline it only allows the phone to be plugged in for like two seconds.
I flashed this (firmwarefile.com/acer-t03) and it fixed the black screen but i seem to not have a OS to default too and the volume up isnt working in the slightest. I could really use some help cause i want to install twrp or something to this