Is anybody who has a .IMG of the stock recovery for the Desire 610 ?
It's always more secure to have it in case of "emergency"...
cbgti said:
Is anybody who has a .IMG of the stock recovery for the Desire 610 ?
It's always more secure to have it in case of "emergency"...
Click to expand...
Click to collapse
I was also stupid enough not to make a backup.
Hopefully someone will post his/her backup here.
I didn't made any modification on my Desire 610 (it's Full Stock for now)...
But I don't know how to backup a Recovery with the Stock Recovery...
If you know, tell me how to do!
cbgti said:
I didn't made any modification on my Desire 610 (it's Full Stock for now)...
But I don't know how to backup a Recovery with the Stock Recovery...
If you know, tell me how to do!
Click to expand...
Click to collapse
could you post stock boot.img please mate
Backup of recovery
cbgti said:
I didn't made any modification on my Desire 610 (it's Full Stock for now)...
But I don't know how to backup a Recovery with the Stock Recovery...
If you know, tell me how to do!
Click to expand...
Click to collapse
Hi!
I have looked into this option and I have found one solution you can try:
Backup custom recovery
What you need to know before flashing custom recovery:
After flashing custom recovery you can always revert to your stock recovery. This procedure will be described later.
Your bootloader needs to be "UNLOCKED". "LOCKED" or "RELOCKED" bootloaders can't flash custom recovery.
This operation will cause your bootloader to show "TAMPERED" text below "UNLOCKED".
For safety reasons, first what you should do is nandroid backup inside recovery. You might need it during "going back to stock" procedure.
1. Download this mini-sdk package and extract it to c:\mini-sdk
2. Download custom recovery of your choice and rename it to recovery.img
3. Move recovery.img to c:\mini-sdk location
4. Connect your device to the PC
5. Boot your device in fastboot mode (like you did during unlocking bootloader - power off the device and turn it on using power + vol down buttons and select "FASTBOOT")
6. Open up command prompt ( Start > Run > type cmd and hit enter ). The window that appears is called Command Prompt. <click here to see the image>
7. Navigate to where you unzipped "mini-sdk" package (type in Command Prompt: cd c:\mini-sdk). Note: make sure the path is not c:\mini-sdk\mini-sdk
8. In the Command Prompt type following command: fastboot boot recovery.img (this command might not with newer hboots)
Command above will not permantently flash custom recovery, but it will just boot it. Why? Because that way we can backup your original, stock recovery image before we replace it with custom one.
9. Perform a nandroid backup.
Click to expand...
Click to collapse
(source: http://forum.xda-developers.com/showthread.php?t=2265618 )
I am very curious if this would work.
If this works, then please share your backup of the recovery and ROM with us.
Cheers,
DulinDuskhawk
I tried it, but something's wrong because it didin't work.
My Desire 610 is modified yet... I couldn't wait.
stock recovery needed
I also need a lot the stock recovery for htc desire 610，can you upload a backup please,thanks
Lets cut a deal guys, im desperately wanting to unbrand a 610 which is on voda software, if someone can provide me with a twrp backup of a generic EU unit (proper 401 not the asian one up here) id be really grateful. ill provide a stock recovery and all i ask is for someone with an EU unbranded unit to do a backup for me, all i need is the system, i just want to create a proper stock option for restoring to original (not stock but rooted, not stock but with init.d and root, just plain stock) once ive made it ill happily upload it for people to use
heres the stock recovery
https://www.dropbox.com/s/spfc3rs97rdxm86/610stock.zip?dl=0
I also have a desire 610 i will upload my eu backup i backed it up ,but write me a message [email protected] so i can send it to you and you could post it here ,can you also help me fix my problem with my desire 610 ....it says aeroplane mode turning off and wont change ,what to do to fix it ?
Emba4 said:
Lets cut a deal guys, im desperately wanting to unbrand a 610 which is on voda software, if someone can provide me with a twrp backup of a generic EU unit (proper 401 not the asian one up here) id be really grateful. ill provide a stock recovery and all i ask is for someone with an EU unbranded unit to do a backup for me, all i need is the system, i just want to create a proper stock option for restoring to original (not stock but rooted, not stock but with init.d and root, just plain stock) once ive made it ill happily upload it for people to use
heres the stock recovery
I have a backup but xda wont let me upload it
Click to expand...
Click to collapse
Emba4 said:
Lets cut a deal guys, im desperately wanting to unbrand a 610 which is on voda software, if someone can provide me with a twrp backup of a generic EU unit (proper 401 not the asian one up here) id be really grateful. ill provide a stock recovery and all i ask is for someone with an EU unbranded unit to do a backup for me, all i need is the system, i just want to create a proper stock option for restoring to original (not stock but rooted, not stock but with init.d and root, just plain stock) once ive made it ill happily upload it for people to use
heres the stock recovery
https://www.dropbox.com/s/spfc3rs97rdxm86/610stock.zip?dl=0
Click to expand...
Click to collapse
I have posted my backup of my Stock rooted EU Backup from TWRP.
http://forum.xda-developers.com/desire-610/general/to-eu-610-rooted-haste-t3031423/page2
Hello, you can restore the pleasure of recovery Stock link that no longer works.
Many thanks
cbgti said:
Is anybody who has a .IMG of the stock recovery for the Desire 610 ?
It's always more secure to have it in case of "emergency"...
Click to expand...
Click to collapse
Here is the stock recovery .img
< dropbox.com/s/x8hq9hv3eoshwtp/610stock.zip?dl=0 <
Just type " h t t p : / / w w w . ( just put letters together to each other because i can't put any outside link - I'm a new member that's why ) " and then copy the dropbox link that i've typed
htc 610
To Adin54;62914543
THANK YOU very much I have been looking for this for some time now. can't find it on the web anywhere thank you
Adin54 said:
Here is the stock recovery .img
< dropbox.com/s/x8hq9hv3eoshwtp/610stock.zip?dl=0 <
Just type " h t t p : / / w w w . ( just put letters together to each other because i can't put any outside link - I'm a new member that's why ) " and then copy the dropbox link that i've typed
Click to expand...
Click to collapse
Thanks for the link!
hellow
i have downloaded the boot.img, but how i restore my phone to stock rom.
i have twrp TAMPERED and UNLOCKED.
thank you!
It's normal. You have to be S-Off to remove this.
Stock EU recovery.img
Hello,
I'm looking for a way to uninstall TWRP and revert back to the original EU recovery.img without losing my data. This way i will be able to install the latest update from HTC. Anybody out there who can help me?
Regards,
Peter
Recovery flash fails. BootMagic check failed
Adin54 said:
Here is the stock recovery .img
< dropbox.com/s/x8hq9hv3eoshwtp/610stock.zip?dl=0 <
Just type " h t t p : / / w w w . ( just put letters together to each other because i can't put any outside link - I'm a new member that's why ) " and then copy the dropbox link that i've typed
Click to expand...
Click to collapse
I tried flashing this.
C:\Users\*********\Desktop\fastboot>fastboot flash recovery 610stock.zip
target reported max download size of 763179008 bytes
sending 'recovery' (12166 KB)...
OKAY [ 1.293s]
writing 'recovery'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 1.322s
thats the full ADB response What went wrong? I downloaded from the dropbox link you posted. Can anyone help with this?
Thanks -Half_Of_A_Life_Left
EDITED--------------------------------------------------
fixed error myself. flashed zip. not img. LOL
ppvogels said:
Hello,
I'm looking for a way to uninstall TWRP and revert back to the original EU recovery.img without losing my data. This way i will be able to install the latest update from HTC. Anybody out there who can help me?
Regards,
Peter
Click to expand...
Click to collapse
I recommend checking out this link : androidfilehost.com/?fid=95916177934552985
Related
[Q] ACER Z3/z130 Europ is there a CWM recovery & zip file of the original recovery
I've misteriously bicked my phone an remain locked in the boot proces....
Time to flash a new stock rom
as I'm flashing I prefer CMW as recovery above the unclear asus one (although I would like to be able to reflash the old one [warranty issues)
Can anyone give me a pointer scanned all of google (possibly the wrong way)
Thanks in advace]
dreuzel said:
I've misteriously bicked my phone an remain locked in the boot proces....
Time to flash a new stock rom
as I'm flashing I prefer CMW as recovery above the unclear asus one (although I would like to be able to reflash the old one [warranty issues)
Can anyone give me a pointer scanned all of google (possibly the wrong way)
Thanks in advace]
Click to expand...
Click to collapse
http://us.acer.com/ac/en/US/content/drivers - Click on O.S.
You'll find your stock system there. Instructions for loading it are included in the zip downloaded. I believe the EMEA Gen1 is for the generic worldwide version, but you might want to verify that. I know that the ORGFr one is for Orange France and the little "s" at the end would signify single SIM versions.
Found this guide to install recovery:
One. Loads Famaroot Just "Framaroot-1.9.1.apk" follow the link here.
http://forum.xda-developers.com/attachment.php?s=e12cbb38af7dd8a173308bb ...
The. Apk to be installed on the Z3 - Z3s / Once installed, it's ordered by phone root app Famaroot.
Two. TWRP 2.4.4.0 files stored on your SD-Card llllllll2510 to post the link here.
https://docs.google.com/file/d/0B0XQigIT17uEcDQtaDJ3U0UtOWc/edit?pli=1
PS. Files Name TWRP24Recovery_Z130_D10-02-14.img.
Do NOT paste it in a folder deep secret I do not find.
Three. Install app "[ROOT] Recovery Tools - Flasher" on the phone to me.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Then, with a flash TWRP 2.4.4.0 [ROOT] Recovery Tools - Flasher by.
Select top (Flash Recovery) and select the top (Other from Storage).
Then browse to the file TWRP24Recovery_Z130_D10-02-14.img. Flash to order
At the end of the process [ROOT] Recovery Tools - Flasher will ask you to reboot into recovery-mode or not.
I answered yes to the reboot to check the flash recovery ... we just finished it.
NOTE ***: It may cause damage to the machine. Or insurance
You must accept the risks in the operation of your own.
I found this on a forum that was in a foreign language to me and used Google Translate to get this info. You can find the original thread here:
http://droidsans.com/node/153986
For returning to stock for warranty issues, just use the original firmware you downloaded from Acer.
Tried the first part flashing the ROM using the provided stock Roms.
That failed it downloads but as soon as first real install occurs it rejects and aborts install access or accept error.
And returns the key part of the file name
I think? No expert at all ? The stock ROM updates do not match the previous ROM on my z30. Do not exactly know the specs of my original ROM proximus.... ??? Would have preferred gen ROM overriding all that stuff?
Or do I need to force adb/ fastboot only to load the system partition.???? But what is the adb/ fastboot command then exactly do I need to expand the zip a second time? After extract zip and instruction PDF?
Will delay cwm tarp after first signs of life of the phone.
Thanks for your answer
sometimes I know.
often I do not know.
Its always good to be able to ask.
Hello guys, i have this Telus Desire 320 (MTK 6582) in bootloop because a wrong build.prop perms, rigth now i dont have any backup avaliable or the stock rom image for flash it via SP Flash Tools. Im thinking in generate a custom recovery (cwm or twrp) and flash it, and the fix the perms and with the phone OS full booted take a nandroid backup, but before i need the stock boot.img and the scatter file, can somebody help me to find that resources...
frankqba90 said:
Hello guys, i have this Telus Desire 320 (MTK 6582) in bootloop because a wrong build.prop perms, rigth now i dont have any backup avaliable or the stock rom image for flash it via SP Flash Tools. Im thinking in generate a custom recovery (cwm or twrp) and flash it, and the fix the perms and with the phone OS full booted take a nandroid backup, but before i need the stock boot.img and the scatter file, can somebody help me to find that resources...
Click to expand...
Click to collapse
I have someone's phone with the same problem.. Were you able to get a scatter file, a kernel (boot.img) and a system.img? He wasn't modifying the phone, just using it and it just boot loops. If I had the phone when he bought it I would have backed up everything.
dechronic said:
I have someone's phone with the same problem.. Were you able to get a scatter file, a kernel (boot.img) and a system.img? He wasn't modifying the phone, just using it and it just boot loops. If I had the phone when he bought it I would have backed up everything.
Click to expand...
Click to collapse
Sorry, out 4 work the past month , u can get the scatter file and everything else for the eur version from any site, just google it, but if ur version is the US (4gb/521 ram), i only find the stock rom in a paid website.
frankqba90 said:
Sorry, out 4 work the past month , u can get the scatter file and everything else for the eur version from any site, just google it, but if ur version is the US (4gb/521 ram), i only find the stock rom in a paid website.
Click to expand...
Click to collapse
I don't know if this is too late but there you go : http://forum.xda-developers.com/showpost.php?p=64659997&postcount=16
Hi
I have Coolpad E501 EU (other names: Modena, Y76, Sky). It's dual sim, stock android 5.1, rooted, stock recovery.
After last mini update (9,2 MB) coolpad logo is showing and then it goes only to recovery. Phone was rooted using KingRoot app, and then applied update so I bet it was a mistake to do so.
I have second one same Coolpad phone - working, rooted, stock android, stock recovery. So it might help in restoring bricked one.
I searched almost everywhere on the internet looking for stock roms, recovery or something that I can flash.
I tried using YGDP tool with 4.4 official rom that I found but no luck. I get the message "Bootloader is old" in logs.
Tried to do backup with nandroid of working phone but it's making backup for custom recovery (cwm - .tar or twrp - .wim). My phone doesn't have one.
Recovery has an option to apply update from zip. Last update that messed up is here:
ota.coolyun.com/ota/Android/Coolpad%20E501_EU/P0/5.1.222.51.P0.151216.Y76_U00_5.1.222.61.P0.160510.Y76_U00/update_1464055522221.zip
I dont care about data., only working system.
Anyway I appreciate some help how to bite that, any ideas how to revive that phone. I was trying to do a system.img backup of /system partition in working phone, but no luck, partition is in ext4. I thought I can restore that using adb.
I will answer any questions if something I wrote is not clear. I'm not afraid of adb, flashed many phones, so I'm not looking for step by step tutorial, only to someone point me in right direction to solve this problem
Thanks for any help.
hey i have the same proble do you find any solution???
billtrz said:
hey i have the same proble do you find any solution???
Click to expand...
Click to collapse
No
I found some custom roms and some software on chinese site, but cant flash them and I think it's because bootloader isn't unlocked. I tried unlocking it but no luck (using android sdk).
can you give me backup you made,i have twrp recovery,if you want it i can give it to you but pleas help me with that backup
daithi2233 said:
can you give me backup you made,i have twrp recovery,if you want it i can give it to you but pleas help me with that backup
Click to expand...
Click to collapse
I have twrp for this phone, but I cant flash it. Every time I try to send a command in fastboot mode I get the message: "FAILED (remote: unknown command)". How did you flash it? Did your bootloader was unlocked in developer settings? Mine wasn't so I think I'm screwed.
Backup I have is with my personal data.
MaX2oo said:
I have twrp for this phone, but I cant flash it. Every time I try to send a command in fastboot mode I get the message: "FAILED (remote: unknown command)". How did you flash it? Did your bootloader was unlocked in developer settings? Mine wasn't so I think I'm screwed.
Backup I have is with my personal data.
Click to expand...
Click to collapse
then you shuld get your phone in official service,i send my and they said they are going to fix it,and i installed twrp whyle my phone worked with flashify i think
Hello ppl!
Is yours problems solved? I have soft bricked Coolpad Modena E501_EU and can't find solution.
Searching everywhere on internet, not find nothing about that phone: kernels, drivers, firmwares etc., like "ghost phone". Firmware version 4.4 is for E501-Y76-Sky but not for EU model and cannot be flashed. I need stock 5.1.222.........Y76_U00 and if can someone make backup and upload somewhere he helped me a lot.
Hi
I don't know where to publish this thread cause there is no Zenfone 3 Zoom Section
So I will write it here till the moderators make the section
This thread is method for changing the stock ROM from Chinese version to worldwide version
NOTE : You can't flash ww ROM from TWRP even if you change the Updater script , also it can't be flashed from ASUS flashtool. [ I attached photos for it ]
Required things :
1- Unlocked Bootloader | you can Download the unlock app from herehttps://ln.sync.com/dl/be16e9f30/h5hsy3iq-ruag2n8n-v293cg8a-wi29bypk
2- adb & fastboot drivers | download it from here
3- WW ROM | from here
** You have to make a backup for your data cause your device will be wiped .
Steps :
1- Unlock the bootloader .
2- Install the adb & fastboot drivers on your PC
3- extract the ROM file [ will have a lot of files , you only need System.img and boot.img]
4- copy System.img and boot.img to adb&fastboot folder
5- open command Prompt
6- put your devices in fastboot mode [ restart your device then press the Vol.Up button and choose fastboot]
7- enter these commands in cmd :
fastboot flash boot boot.img
fastboot flash system system.img
fastboot format userdata
fastboot reboot
8- enjoy your new ww rom
** if you want to flash twrp then >>
1- install it from here
2- enter fastboot mode
3- in cmd , write this command
fastboot flash recovery twrp.img
DONE
photos attached for
battery Status after installing WW ROM
difference between the WB in WW ROM and CN ROM
The errors shown when flashing WW ROM from TWRP or asus flashtool
Nice guide
awesome
I know this isn't the thread for it... but there is no forum for the ZenFone 3 Zoom.
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week. It obviously doesn't flash in TWRP. I also can't unzip it without corruption errors. Redownloaded the ROM multiple times from ASUS.
I assume to update stock rom with an unlocked Bootloader we'll need stock recovery??
DriveEuro said:
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week.
Click to expand...
Click to collapse
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
calus said:
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
Click to expand...
Click to collapse
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
DriveEuro said:
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
Click to expand...
Click to collapse
And where was that twrp install originally from? I haven't found an image for this model specifically.
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Hey guys,
I need some help. I installed the apk to unlock the bootloader and my phone was fine, but after flashing twrp and installing the zip for supersu via twrp, my phone has been stuck on the boot screen. Now it says "The dm verity is not started in enforcing mode and may not work properly" when booting up. I can get back into twrp, and I've tried wiping the dalvik/art cache, system, data, and cache, but my phone still won't boot up. It's stuck on the ASUS boot screen, and I have no idea what to do now. Any help would be greatly appreciated!
magicmanfk said:
And where was that twrp install originally from? I haven't found an image for this model specifically.
Click to expand...
Click to collapse
https://www.asus.com/zentalk/tw/thread-222337-1-1.html
Use google translate.
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
magicmanfk said:
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Click to expand...
Click to collapse
No. The last update WW_V11.41.87.2 is not available for my OTA. I can download the zip though and flash. I haven't actually attempted to do this yet. I plan to flash it today. Not sure if I'll be able to do it through twrp, or if I'll have to flash back the stock recovery first.
So does this change the bands available with it? I have the WW ROM but want the additional bands the US ROM has.
why I only have system.new.dat where can i get the system.img? thank you
How did you get on with flashing the update... did you have to revert to stock recovery and if so which did you use? Thanks for your help with this.
Can I ask where/how you got the stock ROM? I'd like to make sure that these are updated/available somewhere for people on this device to use as needed, and ASUS seems to only have the updates on their website.
Is it possible to relock bootloader after converting to WW?
I'm interested in this phone. Do you know if this one is going to be shipped later this year with Snapdragon 630?. I hear something similar in a YouTube video.
JERRYZKT said:
Is it possible to relock bootloader after converting to WW?
Click to expand...
Click to collapse
Once the bootloader is unlocked it can't be relocked.
I cant find the images in the folder - are they named differently?
Already I convert CN to WW successfully. Thanks for your post . But , I want to update Nougat WW rom. Please help me boss..... I am student and ZenFone 3 Zoom is my favorite phone. Please do something for me .......
???
How can I update Nougat on ZenFone 3 Zoom.....??? Please help me .......
I accidentally flashed a Retail US version on my Moto Z Retail EU, and now I am having a "bad key" at the Warning on boot up. Can someone provide me with a 7.1.1 or 7.0 link for Retail EU for the XT1650-03? It's for the normal Moto Z, not Play or Force. I NEED an Retail EU Boot as I flashed a wrong one and I cannot go back to 6.0.1 to fix it, so my Boot is broken until someone gives me a proper EU one for 7.0 or 7.1.
Thanks in advance!
Note: I am getting this when trying to flash the "XT1650-03_GRIFFIN_7.0_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC" files:
D:\MAIN FOLDER\Android\Moto Z\XT1650-03_GRIFFIN_7.0_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml\GRIFFIN_NPLS25.86-17-3-8_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (32768 KB)...
OKAY [ 0.078s]
writing 'boot'...
(bootloader) Image signed with key bad key
OKAY [ 0.805s]
finished. total time: 0.885s
So yeah, I need a boot image that isn't signed with a bad key for RETEU.
Fixed. Flashed a Retail US 7.0 STOCK ROM even though it said "bad key", and then I flashed erfanoabdi's "Stock" 7.1.1 ROM which flashed a working boot.img that doesn't cause this problem.
Thread closed.
i have same problem bro but i didn't understand your solved please help me
i have same problem bro but i didn't understand your solved please help me
anatete404 said:
i have same problem bro but i didn't understand your solved please help me
Click to expand...
Click to collapse
Flash this: https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962
yanniclord said:
Flash this: https://forum.xda-developers.com/moto-z/development/rom-erfanrom-flashable-zip-t3646962
Click to expand...
Click to collapse
ok i will try flash it tomorrow but my phone still say bad key and didn't star i flash 7.0 with erorr and 6.0 with erorr
i see erorr bootloader not found when i flash with fastboot i mean my phone didn't boot in recovery or normal just fastboot
I am not understanding most of what you are saying, but I can prepare a little .zip with everything you need for you. I make a .bat file that you need to run which should do all the work for you.
anatete404 said:
...
Click to expand...
Click to collapse
Alright, here. Make sure that you have ADB installed System-Wide on your PC, you can use ADB-AIO for that if you don't have ADB and Fastboot Tools installed yet.
Anyways, once you have that, download my .rar file (Yes, .rar, install WinRAR if you don't have it, I won't use .zip in order to compress much more and save space and download time for you), and then run the "Moto Z Automated Flash.bat" file, it should do everything for you, but make sure to READ what I wrote in it, when it asks you to "Press Enter", please READ everything carefully, I will NOT explain further here, everything that you need to know is described and explained to you while you use the "Moto Z Automated Flash.bat" file as a form of guide.
In case you wonder, it is 3.5GB large because it contains the STOCK 7.0 ROM for the Moto Z (that you will flash first), and then the 7.1.1 ROM from erfanoabdi that you will flash through TWRP. It also contains TWRP (which will be flashed during the guide/bat file) and a logo.bin that covers over the stupid "N/A" at bootup.
RAR file download:
https://mega.nz/#!M9kCDQRQ!184HVnma8xGi1m0llqWcSSTdcYjLb9hToRSx0BkqwfI
i flash your rom bro when i flash i cant get recovery only fastboot please help me
try another Kernel flashing by TWRP https://forum.xda-developers.com/devdb/project/?id=17677#downloads
anatete404 said:
i flash your rom bro when i flash i cant get recovery only fastboot please help me
Click to expand...
Click to collapse
Would you please try to at least speak a little proper English and use punctuations, it's really hard to read.
i need flash for my phone i upload problem and info i am sorry about english but please help me
anatete404 said:
i need flash for my phone i upload problem and info i am sorry about english but please help me
Click to expand...
Click to collapse
Here is the latest official full firmware with october patch:
https://androidfilehost.com/?fid=889964283620761640
thx bro but this https://androidfilehost.com/?fid=889964283620761640
working to my info phone i uploaded photo
Benoe said:
Here is the latest official full firmware with october patch:
https://androidfilehost.com/?fid=889964283620761640
Click to expand...
Click to collapse
Hey your link doesn't work anymore. Is it for 7.0+ and RETEU? If so, please send it to me !
yanniclord said:
Alright, here. Make sure that you have ADB installed System-Wide on your PC, you can use ADB-AIO for that if you don't have ADB and Fastboot Tools installed yet.
Anyways, once you have that, download my .rar file (Yes, .rar, install WinRAR if you don't have it, I won't use .zip in order to compress much more and save space and download time for you), and then run the "Moto Z Automated Flash.bat" file, it should do everything for you, but make sure to READ what I wrote in it, when it asks you to "Press Enter", please READ everything carefully, I will NOT explain further here, everything that you need to know is described and explained to you while you use the "Moto Z Automated Flash.bat" file as a form of guide.
In case you wonder, it is 3.5GB large because it contains the STOCK 7.0 ROM for the Moto Z (that you will flash first), and then the 7.1.1 ROM from erfanoabdi that you will flash through TWRP. It also contains TWRP (which will be flashed during the guide/bat file) and a logo.bin that covers over the stupid "N/A" at bootup.
RAR file download:
https://mega.nz/#!M9kCDQRQ!184HVnma8xGi1m0llqWcSSTdcYjLb9hToRSx0BkqwfI
Click to expand...
Click to collapse
Hi,
I tried to unlock bootloader following instruction on Motorola website then my moto z play has "BAD KEY" and keep restarting with that message on the screen. I found and used your file but it didn't help my device out of the "BAD KEY". Please help. Thank you