I will start by saying that I am a long time lurker on these forums and they have helped me through pretty much all of my phone mishaps and accomplishments so thank you guys. I am sorry if this has been answered before but I can't find any solution that works so I'll throw everything out there and hope some generous stranger with some free time can help me out or show me what I am doing wrong.
What I have:
Verizon Galaxy S4
- Model Number: SCH-I545
- Android Version: 4.4.2
- Baseband Version: I545VRUFNC5
What I have done to the device:
- Rooted via Towelroot
- Safestrap 3.72 installed
- Echoe v29 flashed using Safestrap
The problem:
When clicking on the wifi button it turns green for a second then gets grayed out.
What I have tried to fix this problem
I flashed the modem.bin file using Odin with no luck, then flashed the modem.bin and NON-HLOS.bin files (found on this post http://forum.xda-developers.com/showthread.php?t=2487298 and I dowladed I545VRUFNC5_modem_apnhlos.zip from this) then flashed via Odin, still no wifi. I then completely wiped the phone and re-flashed the stock firmware, re-rooted, and re-installed safestrap. I then did a factory reset and installed the Echoe ROM, then the modem and NON-HLOS files all using Safestrap. Same outcome. I then repeated this but flashed the modem and NON-HLOS before I flased the ROM. Nothing.
Any suggestions? Am I missing something?
Aliquis755 said:
I will start by saying that I am a long time lurker on these forums and they have helped me through pretty much all of my phone mishaps and accomplishments so thank you guys. I am sorry if this has been answered before but I can't find any solution that works so I'll throw everything out there and hope some generous stranger with some free time can help me out or show me what I am doing wrong.
What I have:
Verizon Galaxy S4
- Model Number: SCH-I545
- Android Version: 4.4.2
- Baseband Version: I545VRUFNC5
What I have done to the device:
- Rooted via Towelroot
- Safestrap 3.72 installed
- Echoe v29 flashed using Safestrap
The problem:
When clicking on the wifi button it turns green for a second then gets grayed out.
What I have tried to fix this problem
I flashed the modem.bin file using Odin with no luck, then flashed the modem.bin and NON-HLOS.bin files (found on this post http://forum.xda-developers.com/showthread.php?t=2487298 and I dowladed I545VRUFNC5_modem_apnhlos.zip from this) then flashed via Odin, still no wifi. I then completely wiped the phone and re-flashed the stock firmware, re-rooted, and re-installed safestrap. I then did a factory reset and installed the Echoe ROM, then the modem and NON-HLOS files all using Safestrap. Same outcome. I then repeated this but flashed the modem and NON-HLOS before I flased the ROM. Nothing.
Any suggestions? Am I missing something?
Click to expand...
Click to collapse
Like the layout lol everyone should post their questions like this... anyway with Safestrap, you need to flash kernel modules right after you flash a rom, before the initial boot. If you don't do this, then WiFi doesn't work. You need the modules that match your bootloader, here's the link for the ones for NC5: https://www.androidfilehost.com/?fid=23486521113837640 (thanks to Surge)
Sometimes, for some people on certain roms, those modules still don't do the trick. In those cases, this zip seems to work for them:https://www.androidfilehost.com/?fid=23487008491963696 , if you're still not getting WiFi, try this: https://www.androidfilehost.com/?fid=23487008491963692 (thanks to Gigilie)
Haha, it just makes sense to post something that is easier to read than just text. Anyways, that was it! Thank you, you are a life saver. I'll make sure to keep a copy on my SD card from now on just in case.
Fix for NK1 Model?
I have the same problem as well. WiFi won't turn on.
What I have:[/COLOR]
Verizon Galaxy S4
- Model Number: SCH-I545
- Android Version: 4.4.2
Baseband Version::I545VRUFNK1
My only issue with the fix is my baseband version has the NK1, and not NC5 version. Is their a fix for this model?
PLEASE RESPOND ASAP!!!
I have the same question since I am on NK1 now.
I also could not get WiFi working so I went back to the original Verizon ROM.
A link to the correct file would be greatly appreciated!
Thank you,
Rodger
I think I figured it out this morning.
Flash the following zip files after flashing the custom SafeStrap ROM:
NK1 modules:
https://www.androidfilehost.com/?fid=95832962473396366
1545VRUFNK1_modem
https://www.androidfilehost.com/?fid=95832962473396857
This worked for me.
Rodger
Thanks Rodger the files worked for me!!!
Help I don't know what to do either I flashed a rom and I have no wifi and no data right now either my verizon samsung galaxy s4 is sch-i545 and I know it ends in of1
Related
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
monolithcog said:
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
Click to expand...
Click to collapse
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
huytrandinh said:
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
Click to expand...
Click to collapse
Thanks mate for your reply,
I installed cm 11, this did not resolve it.
need the file for the radio/modem, i'm hoping this will fix it but not sure exactly what I am looking for.
**Update***
Just finished installing I9100TDVLSM_I9100TVAULSF_VAU (latest release from Sam Mobile) 4.1.2
Still wi-fi not working.
will try and install cm 10.2 on your recommendation huytrandinh
Okay latest nightly of CM is installed cm-10.2-20131216-NIGHTLY-i9100.
Still has not resolved the wi-fi issue.
anyone have a potential solution?
there is this post for S4, but obviously only viable for S4
http://forum.xda-developers.com/showthread.php?t=2192025
There is also this video tutorial which is for S4
http://www.youtube.com/watch?v=YL8H70Es4wg
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
jedzkiiii said:
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Have been trying that, still no success.
have spent all day trying to find a solution
I tried the modems from here:
##hxxtp://###.veyka.co.uk/sgs2/radios/## (unable to post links ffs)
and few other random links from the forums
MistahBungle said:
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
Click to expand...
Click to collapse
Thanks Mistahbungle,
I checked out that thread http://forum.xda-developers.com/showthread.php?t=2345831
Nothing i could really use.
But I did try a few other kernels:
Siyah-s2-v5.0.1
Unfortunately as soon as flashing with other kernels the screen would go black after the initial boot logo.
Only way to resolve it not booting into the OS was to roll back to:
1. GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9 (flashed with odin)
2. flash CWM-SuperSU-v0.97 with CWMRecovery
3. install cm-10.2-20131216-NIGHTLY-i9100
4. then your general cleaup through cwmrecovery
I'm not sure if I'm doing something wrong when trying to apply another kernel.
anyone able to offer assistance please with right kernel?
cheers
**Update**
Just found a post in that thread - http://forum.xda-developers.com/showthread.php?t=2345831&page=6
Will try the 3 part rom XXLSJ for GT-I9100.
Fingers crossed
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
MistahBungle said:
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
Click to expand...
Click to collapse
Okay just finished testing the rom by installing it via odin (3 part)
still has not yielded any favorable results .
Little disapointed as this was a great backup phone and served for the past 12 months as a mp3 player
Guess as they say; It is all planned obsolescent which is fracked ...
Thanks for the suggestion/help anyway.
I know this is an old thread but my gs2 had this problem and I was able to fix it. Using es file explorer made my way to /data/misc/wifi pulled up the properties to wpa_supplicant.conf and changed group to wifi...then wifi finished initializing...hope this helps somebody
Sent from my SM-T310 using XDA Premium 4 mobile app
for consideration.
I have this phone. the GT-i9100. Had this issue also. I took it apart. The little onboard battery had blown and corrosion got all over all it.
and guess where WiFi hard is. Right Next door. I cleaned it up real good. Put it back together and WiFi came back to life.
So give it some thought guys.
EDIT: Please ignore - it's an issue w/ the latest CM11 build. http://forum.xda-developers.com/showpost.php?p=50349901&postcount=1789
I need some guidance - I'm one of the early S4 owners that's LOKI'd w/ TWRP recovery. I've been running the MDK modem since I got it but decided a couple days ago to update it to take advantage of the faster LTE (Band 4?) if/when it's available. I flashed the most recent I545VRUEMK2 radio with no problem and have been running if for a few days. ( Modem only link from this thread: http://forum.xda-developers.com/showthread.php?t=2487298 )
I'm on the CM11 Nightly ROM and this morning tried to update the the most recent, the first attempt at flashing a ROM since updating the modem. After flashing I can't boot and instead get the Verizon error screen saying I have unauthorized software and to bring the phone to a VZW store.
I can still boot to recovery, and after reflashing the nightly I had been running previously was able to boot back up, but I was under the impression LOKI'd phones can use any of the modems and continue flashing ROMs.
What's going on here? Do I need to go back to MDK?
Thanks for any help!
EDIT: Just had a thought - would the recovery version have anything to do with this? I know that the CM threads say that TWRP has compatibility issues and to use CWM, but I've never had an issue using TWRP when I was running the MDK modem. Does CWM handle post flash cleanup somehow to force ROM compatibility?
Today I decided to upgrade to KitKat and I didn't want to lose my 4.3 bootloader so instead of using OTA I used a tutorial on here and flashed MK2 then some file to update to 4.4.2 without the bootloader and then flashed NC5 kernel and well everythings working fine except I can't enable wifi. Everytime I tick it it just disables itself immediately, is there any fix for this?
Also I tried factory resetting, deleting wpa_supplicant.conf, re-flashing Kernel, renaming device, etc and nothing works as of yet.
Apologies if this makes little to no sense as I've spent nearly all day working on this and I'm practically brain dead as I'm writing this.
SCH-I545
KOT49H.I545VRUFNC5
Kernel Version: 3.4.0, [email protected] #1
Rooted /w safestrap 3.72
S1L3nTShaDoWz said:
Today I decided to upgrade to KitKat and I didn't want to lose my 4.3 bootloader so instead of using OTA I used a tutorial on here and flashed MK2 then some file to update to 4.4.2 without the bootloader and then flashed NC5 kernel and well everythings working fine except I can't enable wifi. Everytime I tick it it just disables itself immediately, is there any fix for this?
Also I tried factory resetting, deleting wpa_supplicant.conf, re-flashing Kernel, renaming device, etc and nothing works as of yet.
Apologies if this makes little to no sense as I've spent nearly all day working on this and I'm practically brain dead as I'm writing this.
SCH-I545
KOT49H.I545VRUFNC5
Kernel Version: 3.4.0, [email protected] #1
Rooted /w safestrap 3.72
Click to expand...
Click to collapse
Try flashing the NC5 modem in PDA slot in Odin(AP in Odin v3.09+):https://mega.co.nz/#!NhUilTID!v9lztagehZ7lUKLFg2RX5rfb_HnG0NU6h58ZAvLwDIY
I'm not sure why all of the sudden this is such a problem. The issue is that I only have a good signal when in 4G mode. When I'm not in 4G the signal is either extremely weak (1x) or gone completely! When I first flashed MJ9 everything seemed to work fine, this is not he case anymore. I also noticed that when using anything GPS related it goes completely nuts when not on 4G...
What can I do to get my phone to work when I'm not in a 4G area?
I'm running 4.1.2
I605VRAMC3
James Mac said:
"... When I first flashed MJ9 everything seemed to work fine, this is not he case anymore.... I'm running 4.1.2 I605VRAMC3..."
Click to expand...
Click to collapse
So, it sounds like you're on the 4.1.2 build , but you've ODIN'd Beanstown106's MJ9 firmware to update your modem.... and it's not working right anymore?
If you made a full nandroid backup, (including the modem), of your current ROM when it was working without problems, then you might try restoring it to see if that would help.
You could also try reflashing Beanstown106's MJ9 firmware to see if that would help. Or... if you want to try to go back to the VRAMC3 modem, then this link with recovery flashable modems might be helpful : http://forum.xda-developers.com/showthread.php?p=36942418. (It would be a good idea to make a backup of your EFS if you haven't done that yet before starting to mess around with the modem).
Dr. Droidberg gave instructions in this (thread) for flashing the new modem in your custom recovery... He says, "... Download the desired modem...Reboot into recovery...Wipe cache & Dalvik cache...Install modem. If you don't like that one for some reason you can repeat the process to go back or try a different one..."
If all else fails, you could ODIN back to stock 4.1.2 and reroot with Casual to start over again.... hopefully that would fix things.
Good luck! :good:
mattnmag said:
So, it sounds like you're on the 4.1.2 build , but you've ODIN'd Beanstown106's MJ9 firmware to update your modem.... and it's not working right anymore?
If you made a full nandroid backup, (including the modem), of your current ROM when it was working without problems, then you might try restoring it to see if that would help.
You could also try reflashing Beanstown106's MJ9 firmware to see if that would help. Or... if you want to try to go back to the VRAMC3 modem, then this link with recovery flashable modems might be helpful : http://forum.xda-developers.com/showthread.php?p=36942418. (It would be a good idea to make a backup of your EFS if you haven't done that yet before starting to mess around with the modem).
Dr. Droidberg gave instructions in this (thread) for flashing the new modem in your custom recovery... He says, "... Download the desired modem...Reboot into recovery...Wipe cache & Dalvik cache...Install modem. If you don't like that one for some reason you can repeat the process to go back or try a different one..."
If all else fails, you could ODIN back to stock 4.1.2 and reroot with Casual to start over again.... hopefully that would fix things.
Good luck! :good:
Click to expand...
Click to collapse
Thanks for the advice! I just got around to flashing the new modem and it worked great! It's so nice to have service again when I'm at work...
Thanks agian!
James Mac said:
Thanks for the advice! I just got around to flashing the new modem and it worked great! It's so nice to have service again when I'm at work...
Thanks agian!
Click to expand...
Click to collapse
Cool. Glad you got it fixed. :thumbup:
Q&A for [ROM] Empty [VZW] Galaxy v3.8 [I545VRUFNK1] 12/19
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Empty [VZW] Galaxy v3.8 [I545VRUFNK1] 12/19. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting fnk1
So this might be a silly question but after upgrading to 4.4.2 via samsung kies, I can't find a root method that will work for VRUFNK1.... I tried towelroot but it doesn't support my device. If I want to try this rom out how do I go about rooting my S4 VZW?
question for wtfchuck about empty vzw galaxy
after you did the Alternative Custom ROM Method: to update to NK1 and flash ss, super su etc, did you immediately flash the custom rom or did you let the system boot and reboot into safestrap and then flash empty galaxy?
thanks
Brian
reliant_turbo said:
after you did the Alternative Custom ROM Method: to update to NK1 and flash ss, super su etc, did you immediately flash the custom rom or did you let the system boot and reboot into safestrap and then flash empty galaxy?
thanks
Brian
Click to expand...
Click to collapse
Nevermind. I allowed the phone to reboot and i got a bunch of "Backup Assistant Has Stopped" errors. Apparently my data backup had something in there that was causing this error.
I went back to safestrap, wiped, flashed empty galaxy, flashed modules and booted into empty galaxy with no issues. apps are installing as we speak.
Brian
rotate_on_home
I couldn't get rotate_on_home.zip to work. I flashed it in safestrap.
Any tricks/tips/setup info for this?
Brian
** [ROM] Empty [VZW] Galaxy v3.92 [I545VRUFNK1] 1/2** system cannot be backed up
System cannot be backed up via Safestrap after installing empty galaxy v3.92. Safestrap always says "backup complete failed" (in red letters). Did full update to I545VRUFNK1 via directions on this page http://forum.xda-developers.com/galaxy-s4-verizon/general/how-to-root-i545vrufnk1-4-4-2-12-1-2014-t2959613. Tried both methods, odin only method and safestrap method. Both worked ok and I am able to back up system via safestrap from here. However as soon as I install empty galaxy v3.92, whether doing a factory reset (via normal recovery or safestrap) or advanced wipe via safestrap or no wipe at all I lose abiltiy to backup system. Tried both Safestrap-JFLTE-3.72-kk-B01 and Safestrap-I545-3.75-KitKat-A03.
I spent hours trying to solve this and got nowhere. I can back up system on stock I545VRUFNK1 no problem but as soon as I install empty galaxy v3.92 via any type of wipe or no wipe at all I can no longer backup system. I can confirm I am on baseband I545VRUFNK1, Android Version 4.4.2 and using I545_NK1_Modules. I have tried every option under the sun seems the problem lies with empty galaxy v3.92.
** [ROM] Empty [VZW] Galaxy v3.92 [I545VRUFNK1] 1/2** system cannot be backed up
Fixed??!!
Went for a ride into the city this afternoon, listened to some Bluetooth music, changed theme in supersu, set correct time zone in safestrap
No major changes made
Decided to give it another go after like 8 hours of trying to solve this yesterday. System (and data) backs up ok now.
From what I have read in the General section for this device, you need to do the temporary kernel downgrade method to root NK1 with towelroot. ..
Sent from my SCH-I545 using XDA Free mobile app
Yeah I did just that. Used I545VRUFNK1_I545VZWFNK1_I545VRUFNK1_HOME.tar via odin to upgrade to NK1 (came from CarHD 32.1S v2 NG6-NCx STOCK so unable to get OTA update). Once I update to NK1 use odin to flash I545_NC5_Stock_Kernel, run towelroot, then use odin to flash I545_NK1_Stock_Kernel. Then install supersu.
Honestly I don't know how I fixed it. My best guess is somehow having the wrong time zone in safestrap somehow caused a problem backing up system. All I know is now I can back up system ok (data too).
Thanks for the help anyway...still worth giving a thumbs up!
phone issue when connecting bluetooth during call
i have an issue that ive found. when i accept a call and then connect my bluetooth headset, com.android.phone crashes and i cant hear anything in my bluetooth headset. i can still talk on the phone and sometimes it switches to speaker. i cant hang up either even if i click phone again.
i managed to recreate it and recorded a logcat with catlog but i dont really know what everything is doing in there or if i caused it with an app conflict.
normally i have my bluetooth headset connected first and then make a call and thats fine. i just switched to this rom last friday or saturday and i dont think i connected the headset during a call since then.
thanks.
I am a bit confused over what is the purpose of the empty galaxy rom. Does it actually free up any space on the internal storage? My S4 seems to have about as much free space as running a full stock rom. What are the actual advantages of running the empty galaxy rom versus a full stock rom?
I love the work on this rom and enjoy running it. I am just curious as to why my S4 only has 6.5 gb free on the internal storage when I barely have any apps installed.
beavis5706 said:
I am a bit confused over what is the purpose of the empty galaxy rom. Does it actually free up any space on the internal storage? My S4 seems to have about as much free space as running a full stock rom. What are the actual advantages of running the empty galaxy rom versus a full stock rom?
I love the work on this rom and enjoy running it. I am just curious as to why my S4 only has 6.5 gb free on the internal storage when I barely have any apps installed.
Click to expand...
Click to collapse
The current size of this rom is less than 1 gig. Current stock 4.4.2 is approx 2.6 gig so there is 1.5 gig saved... UNLESS...you are keeping stock rom in Stock slot and employing slot-1 for custom rom which means you have approx 3.5 gig in just rom. I run EVG in Stock slot leaving other slots empty and have 101 USER apps on phone w/ 6.5 gig left on internal SD.
Nk1 modules
Where can I download Nk1 modules?
thank you
I just wanted to thank you for this rom. It works great, and is the only one I've had zero problems installing. Are you going to be developing one for the lollipop update once it's released? Perhaps one that can be installed with safestrap so that we don't have to do the ota update and lose root access?
Problems with GPS and Keyboard.
Hi I'm still new to flashing roms and such. But I have a Verizon S4 with a FRESH INSTALL of NK1 Towel rooted with Safestrap v3.75, I've attempted to install your rom to my phone and it goes through fine. I have flashed the NK1 Modules. However my GPS is locked on PowerSaving, I can not switch to accurate. Also when I attempt to switch to SwiftType (Keyboard) it prompts me that it may collect data, I ok that and it goes back to Samsung Keyboard. How can I override these? I am having issues with "EGR_TWUI_321". Thanks for your help. If you need more information let me know what you need and I'll try to reply promptly.
So just out of curiosity I wiped my system and started over from a base NK1 then I went through the steps of rooting and Safestrap, but I installed the 3-4-15 version this time. And the above issues are not present. However I really dislike this one when compared to the newest one when it comes to theme and customizing. It's also not as bloat free as the other one. I still have Amazon music and NFL and even VZTones.... Any idea why the newest one is breaking the GPS and the Keyboard? I really want to run that one again =(
MuddyCupz said:
Where can I download Nk1 modules?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95832962473396366
armyofsquirrels said:
Hi I'm still new to flashing roms and such. But I have a Verizon S4 with a FRESH INSTALL of NK1 Towel rooted with Safestrap v3.75, I've attempted to install your rom to my phone and it goes through fine. I have flashed the NK1 Modules. However my GPS is locked on PowerSaving, I can not switch to accurate. Also when I attempt to switch to SwiftType (Keyboard) it prompts me that it may collect data, I ok that and it goes back to Samsung Keyboard. How can I override these? I am having issues with "EGR_TWUI_321". Thanks for your help. If you need more information let me know what you need and I'll try to reply promptly.
So just out of curiosity I wiped my system and started over from a base NK1 then I went through the steps of rooting and Safestrap, but I installed the 3-4-15 version this time. And the above issues are not present. However I really dislike this one when compared to the newest one when it comes to theme and customizing. It's also not as bloat free as the other one. I still have Amazon music and NFL and even VZTones.... Any idea why the newest one is breaking the GPS and the Keyboard? I really want to run that one again =(
Click to expand...
Click to collapse
It sounds like you either done a dirty flash or your system didn't get wiped properly.
That or those apps are being restored from the Play Store. I could be wrong but I don't believe any of those apps are even in the rom.
Maybe a factory reset (full wipe) and a clean install would solve your issues.
sent from a Galaxy S4 far far away.
gadget! said:
It sounds like you either done a dirty flash or your system didn't get wiped properly.
That or those apps are being restored from the Play Store. I could be wrong but I don't believe any of those apps are even in the rom.
Maybe a factory reset (full wipe) and a clean install would solve your issues.
sent from a Galaxy S4 far far away.
Click to expand...
Click to collapse
Thanks I'll try starting over from base and seeing what happens and I'll update you. Towel is the app used to root the NK1 firmware, safestrap is the app that we who are stuck on Verizon with a locked bootloader have to use to flash roms. SwiftKey is a keyboard app from the play store. Or where you talking about my second flash with the 3-14-15?
armyofsquirrels said:
Thanks I'll try starting over from base and seeing what happens and I'll update you. Towel is the app used to root the NK1 firmware, safestrap is the app that we who are stuck on Verizon with a locked bootloader have to use to flash roms. SwiftKey is a keyboard app from the play store. Or where you talking about my second flash with the 3-14-15?
Click to expand...
Click to collapse
I know what all of those are, I was referring to your statement about the bloatware...
armyofsquirrels said:
I still have Amazon music and NFL and even VZTones...
Click to expand...
Click to collapse
gadget! said:
I know what all of those are, I was referring to your statement about the bloatware...
Click to expand...
Click to collapse
Gotcha. I thought it was weird too still have them too. I just reinstalled the newest version this morning. Everything seems to be working now. Not sure what happened since it was the only Rom I installed.