Hello, please help regarding my HTC HD2. I tried everything but nothing helps. I'm trying to restore WP 6.5, but it keeps coming back to the bootloader. here's what I've tried:
1st made the task 29 (after installing HD2 returned to the bootloader)
2nd installed radio Radio_Leo_2.15.50.14 (after installing HD2 returned to the bootloader)
3rd installed Hsp 08.02 (after installing HD2 returned to the bootloader)
4th installed signed RUU (after installing HD2 returned to the bootloader)
-Installation went through with no problems and always come back to the bootloader ??
-I tried the installation via a micro SD card but throws an error 'update rom code error ... not allowed)
-Magdlr 113 installed without problems but returns to the bootloader after restarts
- I tried with MTTY but always the same, restart and returns to the bootloader
- I tried with 3 diferent RUU (all for my country) and nothing
Any solutions? All comments are welcome. Ty
upravnik said:
Hello, please help regarding my HTC HD2. I tried everything but nothing helps. I'm trying to restore WP 6.5, but it keeps coming back to the bootloader. here's what I've tried:
1st made the task 29 (after installing HD2 returned to the bootloader)
2nd installed radio Radio_Leo_2.15.50.14 (after installing HD2 returned to the bootloader)
3rd installed Hsp 08.02 (after installing HD2 returned to the bootloader)
4th installed signed RUU (after installing HD2 returned to the bootloader)
-Installation went through with no problems and always come back to the bootloader ??
-I tried the installation via a micro SD card but throws an error 'update rom code error ... not allowed)
-Magdlr 113 installed without problems but returns to the bootloader after restarts
- I tried with MTTY but always the same, restart and returns to the bootloader
- I tried with 3 diferent RUU (all for my country) and nothing
Any solutions? All comments are welcome. Ty
Click to expand...
Click to collapse
I tried with different batterie,usb cable and micro sd card as well, still same problem. please help!!
I would reflash HSPL 2.08
then try custom WM6.5 ROM from link in HD2 Wiki & then a radio too ...
http://forum.xda-developers.com/wiki/HTC_HD2#ROM_Development
ROM code error would suggest you got no HSPL & ROM code of roms you are trying are not correct, ROM code is region & vendor specific but with working HSPL and USB flashing it is bypassed, dlashing via SD card removes HSPL at first step then if wrong ROM code it fails to flash so you are best sticking with USB flashing.
Mister B said:
I would reflash HSPL 2.08
then try custom WM6.5 ROM from link in HD2 Wiki & then a radio too ...
http://forum.xda-developers.com/wiki/HTC_HD2#ROM_Development
ROM code error would suggest you got no HSPL & ROM code of roms you are trying are not correct, ROM code is region & vendor specific but with working HSPL and USB flashing it is bypassed, dlashing via SD card removes HSPL at first step then if wrong ROM code it fails to flash so you are best sticking with USB flashing.
Click to expand...
Click to collapse
Thank you for answer
HSPL 2.08 was re-fleshed (with HSPL 4) each time after attempting to install via SD card, that's OK.
I tried to install this three ROMs:
RUU_Leo_S_TMO_HR_3.14.119.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
RUU_Leo_TMO_HR_1.66.119.0_Radio_Signed_15.31.50.07U_2.07.51.05_2_Ship
RUU_Leo_TMO_HR_1.72.119.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
I followed all the steps that returns the WP on the phone, and HD2 do everything, except the most important one, not raise OS.
ROMs installation runs without any problems via USB but when HD2 should run WP 6.5, HD2 returns to the bootloader. And now when I turn on the phone automatically starts in bootloader.
Flash SPL 3.03HSPL then flash the 3.14 ROM via USB
Do you get 100% progress bar on the HD2 while flashing ?
If completes ok try rebooting but do so via reset button on back of HD2 & see if boots.
If still going to bootloader try reflashing just the ROM radio 2.15.50.14 from link in HD2 wiki as they known working radio ROMs.
Try rebooting again & using reset button on rear to see if helps get proper boot.
If still fails try flashing Radio ROM again but from sd card & test boot again :-S
Mister B said:
Flash SPL 3.03HSPL then flash the 3.14 ROM via USB
Do you get 100% progress bar on the HD2 while flashing ?
If completes ok try rebooting but do so via reset button on back of HD2 & see if boots.
If still going to bootloader try reflashing just the ROM radio 2.15.50.14 from link in HD2 wiki as they known working radio ROMs.
Try rebooting again & using reset button on rear to see if helps get proper boot.
If still fails try flashing Radio ROM again but from sd card & test boot again :-S
Click to expand...
Click to collapse
Thanks for the help, but still nothing.
I followed all the steps that you wrote and at the end, again the same - the bootloader.
- SPL 3.03HSPL flashed OK, pic 1
- Flashed 3.14 ROM via USB, 100% progress on HD2 and PC, pic 2
- for reset I used button on rear, and HD2 returned to bootloader
- after that I tried installation via SD card (formated to FAT32), pic 3
- installation stopped after this point, pic 4, and i got this messages pic 5 and pic 6
I don't know is this important but, after each installation, before entering the bootloader, the screen shortly flashed and in the background I can see 'loading' but quickly bootloader start again.
I think it's something wong in the HD2 because in the bootloader I can not see the radio version at the bottom of the screen. I'm not sure, but at the previous installation (before it broke) I was able see that. Thank you again
Problem is it not flashing radio &/or suspect Radio nand is bad !
You want flash HSPL & the ROM via USB then try just flashing a Radio via USB & SD, not the complete ROM as via SD that removes the HSPL then you get those error messages as wrong original ROM for region/vendor.
Just try various attempts with 2 radio roms linked below (rename same as a full ROM to flash via SD) & hope you get lucky !
http://www.datafilehost.com/download-0f71cda2.html
http://www.datafilehost.com/d/9b79ee41
Mister B said:
Problem is it not flashing radio &/or suspect Radio nand is bad !
You want flash HSPL & the ROM via USB then try just flashing a Radio via USB & SD, not the complete ROM as via SD that removes the HSPL then you get those error messages as wrong original ROM for region/vendor.
Just try various attempts with 2 radio roms linked below (rename same as a full ROM to flash via SD) & hope you get lucky !
http://www.datafilehost.com/download-0f71cda2.html
http://www.datafilehost.com/d/9b79ee41
Click to expand...
Click to collapse
Thanks for your help. I installed the radio via sd card with no problem but when installing the ROM again the same problem. I think it's best to leave the HD2 to get some rest and try again when I have more time and nerves. Thank you so much for your advice. I hope I will fix it .. once
Related
My HD2 stuck at the HTC boot screen. It's stock rom is RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship, but flashing is fail from PC or SD card.
Error snapshot is in attachment.
Can you help me pls?
TEEEmon said:
My HD2 stuck at the HTC boot screen. It's stock rom is RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship, but flashing is fail from PC or SD card.
Error snapshot is in attachment.
Can you help me pls?
Click to expand...
Click to collapse
What SPL are you on?
SPL-1.42.0000, but I try different SPLs and HSPLs
Hmz, I havn't seen this... Does the device boot, or does it directly go to bootloader?
Normally it's stuck at the HTC boot screen, to go to bootloader I press volume key. I try different versions of roms, but no result
TEEEmon said:
Normally it's stuck at the HTC boot screen, to go to bootloader I press volume key. I try different versions of roms, but no result
Click to expand...
Click to collapse
If it get's stuck at HTC Boot screen, you don't have a correct ready.
Try to install HSPL, and flash other radio...
Does any solutions to repair extended rom on HD2 or it's hardware issure?
xmoo said:
Try to install HSPL, and flash other radio...
Click to expand...
Click to collapse
No results
is this your stock rom?
have you tried downloading once more the stock rom from HTC's website based on your device's serial number? Error 18003 is most likely caused by flashing a corrupt file (either from the download or transfering/renaming the file to SDCard) ???
EDIT: are you sure you are not trying to flash a non-WWE version of the stock ROM without previously installing HSPL on your device?
Yes, I use firmware from HTC's website based on my device's serial number... When I flash custom roms or radio (roms, which image not contain EXTROM) it's flash well, but no result.
This morning I tried again to flash device and it flash well!! But it stuck at the HTC boot screen again. I used the same firmware as yesterday (RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship from official HTC's website) and used the same CD card as yesterday, but today it flashed well. I think, that it's hardware issue
TEEEmon said:
This morning I tried again to flash device and it flash well!! But it stuck at the HTC boot screen again. I used the same firmware as yesterday (RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship from official HTC's website) and used the same CD card as yesterday, but today it flashed well. I think, that it's hardware issue
Click to expand...
Click to collapse
maybe a bad copy/download?
Try this otherwise send it to warranty:
1) HSPL2
2) Task 29 by doonloop
3.1) Flash a stock WWE ROM (try a version 1.66) from the PC
or
3.2) Redownload your HK stock from a different source (specific thread here at XDA), rename it LEOIMG.nbh and flash it from your PC
Good luck!
Do not flash any ROM from your SD card please. Just use the recommended way - through PC.
remove sd card from your leo and try to flash rom using pc .
@mon_money..How can he flask from his pc ir phone wont boot... dont you need active sync?
I had a similar problem when i was using an incompatible radio rom for the rom i was trying to install...
copy the nbh file from the stock rom into the root of the sd. that will fix the problem..
I had a similar problem with a different ROM and I tried this suggestion provided by mskip. It does require you already have HSPL2 installed.
1. Turn your phone off and unplug it from your computer
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear with the "SERIAL" driver displayed at the bottom
3.connect it to your pc it should install drivers.the screen should now say "USB"
4.reflash with std rom/radio, known working ROM, or original OEM rom - TMOUS has a bundled 2.13 download from their website.
Good luck.
slatiwonk said:
4.reflash with std rom/radio, known working ROM, or original OEM rom - TMOUS has a bundled 2.13 download from their website.
Click to expand...
Click to collapse
probably best you don't use the 2.13. chances are it would be fine, but this rom seems to be pretty good at updating the spl to 2.1
not a problem for tmous users who can downgrade using rom 2.10 but that only works because their phone is tmous. the OPs phone isn't.
im pretty sure it just simply wouldn't work, but whilst you are already having problems, don't run the risk.
I try all this solutions but no result
Hi guys,
At the moment i have SSPL.
I want to install HSPL3 - 2.08
but i cant unstall the sspl.
when i try to install hspl, i get error, BAD SPL VERSION
to install my sspl i used the folowing steps :
1. Remove SD (and remove Application Data and Program Files folders from it using SD card reader)
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE or for Orange UK/FR HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset.
10. Insert SD
Any help?
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
samsamuel said:
you dont have sspl, 'sspl - soft secondary program loader' is a one shot version of 'hspl - hard/hacked secondary program loader'.
You have 'spl - secondary program loader' - stock spl.
If you followed those steps you now have spl 3.03 and so hspl will not work. You must downgrade your phone to an earlier rom/spl version. 1.66 for example. USB will be fine so long as its your correct stock rom, , any version except 3.14.
Click to expand...
Click to collapse
how can i downgrade?
its not working
as i said, get your stock rom, any version, but it must be correct for your phone, and flash it usb is fine. that's it.
AAh ok thanks it worked
I flashed original 1.66 ROM
No w i was able to install HSPL
Thanks!!!
no worries.
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work or install Android then. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms (1.66) and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 294.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
I then tried SSPL with 1.66 as the ROM and i got it to flash the ROM with no problems but the HSPL still sticks at 3.03. And thats expected since SSPL is like a one shot go at flashing a ROM different from your region.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Any help will be appreciated.
Click to expand...
Click to collapse
Is your phone branded (T-Mobile, Vodafone, O2, Orange, etc) and to what country?
If you are using a T-Mobile USA HD2, then you may try and flash the 2.08 TMOUS ROM.
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
lhayati said:
Hey,
I want to do the exact same thing and I am locked on Orange? Is it possible to downgrade?
Click to expand...
Click to collapse
If you can find the previous stock ROM than yes. But it's a hard one to find (Orange UK)
Problem with spl3.03
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOW"
My S/N is HT04YNW00034
Please help me.
dalisman said:
Hello all. I trying today upgrade my htc leo to 3.14 rom but right now my htc is locked and I cant downgrade to any version . I trying to use all countries software for downgrade but allways I have information "NOT ALLOWED"
My S/N is HT04YNW00034
Please help me.
Click to expand...
Click to collapse
Mate, do you want to upgrade or downgrade? You're statement is confusing
what do you mean "locked"?
As long as you flash the CORRECT STOCK ROM, you can upgrade or downgrade.
What you have to do first is find the CORRECT STOCK ROM".
you can't try all countries version, it is dangerous.
Go to htc website and select the country where your hd2 come from, and download the stock rom using your SN.
If you can't find the CORRECT STOCK ROM, the only alternative is using gold card method.
Good luck
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
dalisman said:
I want to downgrade to version 1.66 but I cant beause always when I try to downgrade (using sdcard) I see information "not allow" . lock = Software update failed . please try again.
what is this gold card ?
Click to expand...
Click to collapse
I think you haven't found th CORRECT STOCK ROM, that is why "not allow"
Gold card is a method to enable you to flash stock rom from other country (it is useful in a situation where you can't find the CORRECT STOCK ROM.
There is a thread for gold card, just using search button to find it out
Good luck
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
dalisman said:
I allready check I think all countries because Im not sure from which country is my phone. and always on htc website I see information software is not for this S/N
Click to expand...
Click to collapse
Is it branded phone (telstra, Tmobile, orange, etc)? if yes, you should go to their website instead of htc website.
However, if you still fails, then the only alternative is using gold card method.
I never experience for this though I read it many times, so I would suggest you to search the forum. There is a thread title [GOLD CARD], just use search button.
Good luck
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
dalisman said:
hello
I read about gold card and I understand everything, but my problem is :
my htc is detected by system but not detected by active sync
and I cant make gold card
Click to expand...
Click to collapse
I would suggest you to post this at the gold card thread, mate
Maybe there's someone can answer that.
Good luck
Hi all
Apologies if this has been covered before but I cannot find anything thus far. I upgraded my HTC HD2 (Vodafone branded) from 1.72 to 3.1.4. As the device was branded I had to use HSPL (version 3) as Vodafone had no specific version, at that time, and thus used the generic HTC version as it was all that was available at that time. This seemed fine until I hit the, what I now know to be the memory issue, with this combination. At this point after trying a number of custom ROM's, I am using a Dutty Custom ROM (V12, COM2). I decided today, as I just discovered that Vodafone now have their own specific 3.1.4 ROM update available I would flash the 3.1.4 ROM, which I was able to download legitimately from the HTC web site, using my serial number.
I first flashed the stock ROM in the vain hope that the Vodafone had fixed the memory issue. They haven't and thus I decided to remove HSPL. I did this from the installation program and chose the 0000 option which removes HSPL. I then rather stupidly decided to run a task 29, which of course, failed at 0% and just hung totally. It did not time out after 10 minutes, at which point I had no option but to remove the battery and data cable. Fortunately the phone booted up and ran normally. I thus decided to re-flash with the legitimate Vodafone 3.1.4 ROM. as the memory issue still persisted. It failed at 0% just as with the task 29. I now cannot flash ANY Rom unless I install HSPL. I have only tried version 3 thus far.
Any ideas how I can get my phone loaded up with my genuine 3.1.4 Vodafone branded ROM without HSPL and thus avoid the memory issue and load genuine ROMS and updates please? For now I am back to using the Dutty V12, COM2 ROM. Any ideas most gratefully recieved and apologies if this has been covered before.
Many thanks in advance.
Regards,
Paul Lemonidis.
Try flashing to HSPL 2 not 3, and read this thread
http://forum.xda-developers.com/showthread.php?t=609477
Russ
Flash your vodafone stock ROM over SD.
And to be able to install custom ROM, use SSPL_RUU
phone into bootloader
connect usb
run hspl2
choose 1.66.0000
when phone restarts immediately re enter bootloader
run the voda 3.14 rom flash over usb
Thanks
I flashed from an SD Card and all was well. I can now reflash the same version, which I could not before, without HSPL. Thus for the moment I no longer need HSPL. Thus my warranty is valid again and I have a stable phone with the latest correct vendor ROM. I may try a custom ROM again at some point in the future if I experience problems but at least I can say I gave it a fair chance.
As a sideline, Swype works beautifully with this ROM.
Once again many thanks in advance.
Regards,
Paul Lemonidis.
samsamuel said:
phone into bootloader
connect usb
run hspl2
choose 1.66.0000
when phone restarts immediately re enter bootloader
run the voda 3.14 rom flash over usb
Click to expand...
Click to collapse
hi
i am facing the similar issue, cannot revert back to branded ROm it does not boot any further than HTC logo, will the goldcard can do this,,, aslo my branded ROM is 1.72.82124, and reason i want to put back on is that my phone memory after installing custom rom is always less than 12mb then go below 1 mb in few hours..
tried hspl, sspl etc nothing works..
netvpn7 said:
hi
i am facing the similar issue, cannot revert back to branded ROm it does not boot any further than HTC logo, will the goldcard can do this,,, aslo my branded ROM is 1.72.82124, and reason i want to put back on is that my phone memory after installing custom rom is always less than 12mb then go below 1 mb in few hours..
tried hspl, sspl etc nothing works..
Click to expand...
Click to collapse
Take the 1.72 ROM and use the flash from the SD Card method. This will get you back your memory.
The reason for the memory problems is a combination of 3.14 ROM and HSPL.
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks
Hi All,
I m trying to go back from android to winmobile and my device is stuck...
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship and i have tried to flash HAED SPL 4 and i received error in device id...
In bootloader it appears correctly with SPL-2.08.HSPL 8G XE, and in the white eare it write Serial in in the begining and when I try to flash it change to USB.
The main problem is that I have tried to flash Energy.Leo.21916.Sense2.5.Jul.04 above android it stuck on 4% and I can't reflash anymore, when i try to reflash it stuck on 0% no matter what I do.
In bootloader (3 colors) i have the following error: "upgrade rom code error please try again"
Please advice...
sagytb said:
I have tried to flash different winmobile roms include RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_
Click to expand...
Click to collapse
do you have a tmous hd2? because if you do you are VERY lucky not to have bricked it, , the tmous CANNOT just take any old stock rom, it MUST be a tmous stock rom, and that one listed above isn't.
go get the real tmous rom, try to flasj it over usb with the phone in bootloader, , if it fails, extract ruu_signed and flash it from sd card (4gb sd card or smaller, , bigger wont work)
If you get any errors (especially the blue writing on white when you sd card flash, , example ''radio fail'') let us know.
I have european device no Tmobile device.
Is there any hope?
Well rom update error usually means you tired to flash the wrong rom over SD card whilst hspl is installed, however since you say it still says 2.08.hspl then its not that,
(incidentally, that's not a correct spl,,,2.x are tmous spls, they'll work on the reg HD2,and are required for magldr Android etc, but they can cause issues going back to stock, nothing critical, but can annoy )
I personally think you have a stuck radio,, confirm this by flashing the correct rom from SD.
By correct rom, i mean if the phone is originally a german o2 phone, flash the german o2 rom, if it was bought rom unlocked (this has nothing to do with the network lock), from for example carphone warehouse, in the uk, then use the wwe rom, for uk voda, use the uk voda rom, only the correct rom will flash from sd card.
#take note of what it says, blue writing on white background, during the flash.
first, thanks for your help, i manage to flash wwe roms, but when i try to flash hard spl, it stuck again, in the phone, in bootloader menu (3 colors) i see usb mode and it doesn't continue to flashing mode (black screen) and it stuck on the SPL execution as well, some times i receive unknown errors.
I have tried to flash from sd card several wwe roms (i have no idea what was the original) and the problem is the same.
Any solution ?
Can i flash hard spl from sd card?
sagytb said:
Can i flash hard spl from sd card?
Click to expand...
Click to collapse
no, you can't.