Hello, so I recently rooted and flashed CM 10.2 on my Galaxy Ace 2 and it can't see the sim card, and I can't call to anyone (it says turn off airplane mode before you want to make a call, even if it's turned off). How do I get back to stock ROM with no root? When I go to download mode it goes straight to ODIN MODE ; CUSTOM BINARY DOWNLOAD: YES (1 counts); CURRENT BINARY: CUSTOM. And my phone doesn't show up in emergency recovery table. It says: "device not responding, to resolve the issue, reboot the device). Pls help
Related
Hello guys,
I need your help because my GS3 can't restart, it's blocked on start screen Sansung S3
In fact, my S3 was rooted and I installed Rom Manager to change "easilly" the Rom ( for XperianZe-0.9.9_AROMA_JKay_Elegant6-EMC3)
One precision : before changing Rom, Rom Manager made some changes in the CWM.... and I think my problem is here.
I succeed to instal the new Rom XperianZe using Rom manager (clean Wipe, cache, etc...) and it worked but I wanted to try another one Rom (Android_Revolution_HD-SGS3_25).
I had noticed before installing the latest ROM when I wanted to start the S3 in Recovery Mode manually, the screen remained blocked after posting Odin mode / product name:GT i9300 / Current binary download : yes / system status : custom and after the message "Downloading ... Do not turn off target!!" and then nothing ... but through Rom manager, I could access ...
But, for some unexplained reason, the installation of the Rom Revolution failed and the S3 rebooted and now I get stuck on the start screen Samsung Galaxy S3
The problem is that now I can not access the recovery, because I have always the message "Downloading ... Do not turn off target!"
Through Odin, it's impossible because the recovery is blocked, the device is not detected.
Could you help me, please, how to install a new recovery and then reinstall a ROM? thank you in advance for your help
Try accessing recovery by restarting the phone, pressing power button volume up and home, that should get you into recovery. If that works wipe everything and try installing the last ROM again or simply restore your nandroid of your working ROM.
I've been running CM10.1 for quite a while with no issues, but I decided to "experiment" with a 10.2 ROM that I found. I've managed to brick the tablet to the point where I have 2 boot options:
1) With no intervention, it boots directly into Download mode
2) I can hold the power button and volume key and get the option for Recovery or Download, but Recovery mode does *NOT* work. It just blinks and stays on the screen with the Recovery and Download options.
I've tried flashing with ODIN, but no luck. On the downloading screen, there is a message at the top left that says: "Reason: No Kernel". I'm not sure if this actually means there is no kernel on flash or if it is unrelated.
The other information on this screen is:
Secure Mode: Secure
Check Signature: Check
Custom BInary Download: No (0 counts)
Current Binary: Samsung Official
Waiting for USB cable...
When using ODIN, ODIN reports that it was successful in copying the new recovery image to flash. But, the result is always the same.
Does anyone have suggestions or know what the problem may be? Any help would be GREATLY appreciated.
Thanks!
Hello everyone,
I was originally on stock 4.3 rom.
I wanted to unlock my ATT Galaxy note 2 so I downgraded to 4.1.1, went to service menu and did the unlock, and it was fine. I then decided to do an update through att servers, which it downloaded and installed. However, after installing, it rebooted to the "Samsung Galaxy Note II" screen, and won't go past that.
I decided to put the 4.1.1 rom that worked on it via odin, and this installed fine, but it still wouldn't go past the "Samsung Galaxy note II" screen.
I then proceeded to using Samsung Kies and did Emergency Recovery. It downloads 4.1.2 firmware on my computer, but when it comes time to put it on to my Galaxy note 2, the phone (in download mode of course) reads at the top "unsupported version" , and kies on my computer tells me "the installation failed due to the samsung sgh-i317 device. Please contact Samsung Services if this problem proceeds."
I did notice however, after using kies, even though it fails, and pressing the power button the "Samsung Galaxy Note II" logo screen does not appear, and the phone just show the screen that says "firmware upgrade encountered an issue. please select recovery mode in kies and try again". I then decided to put the 4.1.1 again thinking that maybe this time it will work, but nope just goes back to "samsung galaxy note II" screen and does nothing. Now, I can use kies to go back to "firmware upgrade encountered an issue. please select recovery mode in kies and try again" or use the 4.1.1 to go back to "Samsung Galaxy Note II" screen and just sit there.....
I don't care about unlocking the phone or not anymore. I don't care about having custom rom or anything. All I want is the original Stock rom 4.3 from AT&T. Can anyone please help me?????
Also, I have been using odin 3.7, the rom that i used that worked (the 4.1.1) is called: KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5
my phone reads this in download mode:
Odin mode
Product Name: SGH-I317
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Know Warranty Void: 1
RP SWREV: A2
Got same problem
I am in the same boat. I got OTA to 4.3 and I went and downgraded to 4.1.1 to unlock and update and got stuck with error. Can't restore or do anything with the phone now. In ODIN, it got stuck with sboot.bin. It stuck at bootloader.
Thanks.
adilnota5 said:
Hello everyone,
I was originally on stock 4.3 rom.
I wanted to unlock my ATT Galaxy note 2 so I downgraded to 4.1.1, went to service menu and did the unlock, and it was fine. I then decided to do an update through att servers, which it downloaded and installed. However, after installing, it rebooted to the "Samsung Galaxy Note II" screen, and won't go past that.
I decided to put the 4.1.1 rom that worked on it via odin, and this installed fine, but it still wouldn't go past the "Samsung Galaxy note II" screen.
I then proceeded to using Samsung Kies and did Emergency Recovery. It downloads 4.1.2 firmware on my computer, but when it comes time to put it on to my Galaxy note 2, the phone (in download mode of course) reads at the top "unsupported version" , and kies on my computer tells me "the installation failed due to the samsung sgh-i317 device. Please contact Samsung Services if this problem proceeds."
I did notice however, after using kies, even though it fails, and pressing the power button the "Samsung Galaxy Note II" logo screen does not appear, and the phone just show the screen that says "firmware upgrade encountered an issue. please select recovery mode in kies and try again". I then decided to put the 4.1.1 again thinking that maybe this time it will work, but nope just goes back to "samsung galaxy note II" screen and does nothing. Now, I can use kies to go back to "firmware upgrade encountered an issue. please select recovery mode in kies and try again" or use the 4.1.1 to go back to "Samsung Galaxy Note II" screen and just sit there.....
I don't care about unlocking the phone or not anymore. I don't care about having custom rom or anything. All I want is the original Stock rom 4.3 from AT&T. Can anyone please help me?????
Also, I have been using odin 3.7, the rom that i used that worked (the 4.1.1) is called: KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5
my phone reads this in download mode:
Odin mode
Product Name: SGH-I317
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
Know Warranty Void: 1
RP SWREV: A2
Click to expand...
Click to collapse
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Got it to work.
lacoursiere18 said:
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks...I got it to work again flash via ODIN following this thread
http://forum.xda-developers.com/showthread.php?t=2589891
You can download the firmware without bootloader here. I download and ran via ODIN and my note 2 ATT back to normal.
http://d-h.st/DGZ
lacoursiere18 said:
Download 4.3 Kies firmware..since you excepted the OTA over the "servers".. flash it via Odin..Once it passes boot into recovery and do factory reset.. should fix it
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
same thing happened to my note 2 i317. it was running on 4.4.2, downgrade it to 4.1.1, successfully unlock it. but my son tried to update it ota. now its stuck on Samsung logo and won't get to recovery mode. I tried flashing the 4.1.1 firmware again but it just won't pass the Samsung logo and cant get it to recovery mode. please help me
For unlock i371 we have 2 ways:
1)If your phone have 4.1.2 or less you jast need to try unlock codes:
*#197328640#
Select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF >After choosing this option, wait about 30 seconds.
Then go back one step by pressing the Menu button and then select Back.
This will take you to [6] Network Lock options
Choose [4] NW Lock NV Data INITIALLIZ
Wait for a minute then reboot your phone.
Insert a SIM Card from a non-AT&T carrier
IF it not help to you, you need downgroad FW.
2) if you have 4.2.2 or more(4.3, 4.4.2.)
You need to wach this video and unlock your device! youtube.com/watch?v=KVrhNO__9JY
You need downgroad MODEM FW(NOT ANDROID VERSION!!!) and use *#197328640# from 1 step.
Have fun!
thank u very much
If you don't know this, watch "The Brick" from rirozizo: https://www.google.com/url?sa=t&rct...=yeCRBYPIcdesj7y16z2WIw&bvm=bv.83339334,d.c2E
Hello everyone.
My phone: Samsung Galaxy Mega 6.3
Today I decided to install CM11 on my phone. When I try to install recovery with Odin it was succesfully but when the phone restarts "set warranty bit recovery "
I researched this problem on the internet, someone writed If I reinstall the original ROM (from sammobile.com) the problem would be solved.
But it was worse. Because now the phone doesnt turn on. recovery mode and downloading mode doesnt working.
How can I recover the phone please help me. If you tell us step by step..
harbiaslan said:
Hello everyone.
My phone: Samsung Galaxy Mega 6.3
Today I decided to install CM11 on my phone. When I try to install recovery with Odin it was succesfully but when the phone restarts "set warranty bit recovery "
I researched this problem on the internet, someone writed If I reinstall the original ROM (from sammobile.com) the problem would be solved.
But it was worse. Because now the phone doesnt turn on. recovery mode and downloading mode doesnt working.
How can I recover the phone please help me. If you tell us step by step..
Click to expand...
Click to collapse
Hi..what model is your mega and which recovery did you use and were did you get the recovery from as the yellow warranty means that knox security is on you phone and any custom recoveries or custon roms will show this..but first have to find what model your phone is and which recovery was used.
Sent from my SGH-I527M using XDA Free mobile app
starmaster10 said:
Hi..what model is your mega and which recovery did you use and were did you get the recovery from as the yellow warranty means that knox security is on you phone and any custom recoveries or custon roms will show this..but first have to find what model your phone is and which recovery was used.
Sent from my SGH-I527M using XDA Free mobile app
Click to expand...
Click to collapse
My phone model is Galaxy Mega 6.3 GT-I9200.. I installed TWRP..
in addition, the screen remains black, boot animation does not even come
harbiaslan said:
My phone model is Galaxy Mega 6.3 GT-I9200.. I installed TWRP..
in addition, the screen remains black, boot animation does not even come
Click to expand...
Click to collapse
samething happened to me, but its not broken, something just happens to where you cant see the boot logo picture anymore but the backlight still comes on.
try this.
when turning on your phone go through the steps to get to download mode
then plug it into your computer you should hear it connect.
if not you dont hear the connection then either your computer volume isnt up or you
didnt follow all of the steps to enter download mode correctly.
once youve gotten to download mode flash PHILZ CWM recovery for the i9200
then reboot
when turning on your phone go through the steps to get to recovery, the phone will stay on a black screen until you reach recovery.
wipe data & factory reset.
you should be fine afterwards. although you'll still have a black screen on boot up. just install a custom/stock rom
hope this helped
Thanks a lot for answers. I solved this problem. It was a screen problem and i changed screen of my phone. The phone is working perfect with official samsung Gt-i9200 rom which is published for Russia 4.4.2..
Soo i just got my galaxy s3 twrp installed using the twrp official app from play store, after i installed the twrp, i havent test it yet, soo i continue downloading custom rom from rom manager premium, the exynos rom i guess, after downloaded, i install it using rom manager then my phone reboot into "downloadin, please do not turn off target", but when i press "volume down+power+home button" it gives me the option to continue or restart, and if i select the restart option, it boot me into the "downloading mode please do not turn off the target" but when i select continue, it take me to "downloading, do not turn off target" and with red ODIN MODE on left top and it shows:
custom binary: Yes (2 Counts)
current binary: custom
system status: custom
so i cant boot into normal system android, how do i fix this, im ok to lose my data, sory my bad eng
Did you confirm the phone model number on download mode?
Start over by using Odin to flash a stock ROM.
Flash a stock rom via odin and start over. You need to root the phone via chainfire, then you can mess with apps like those.
Beamed in by telepathy.