i can't enter recovery..what should i do? how to flash?
#help me pleaseeeeeee!!!!!!!
Related
i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
juntax said:
i have lenovo sisley s90u 1gb ram and its bricked, its keep bootloop and when i try to enter recovery mode its just get "warning invalid image enter fastboot mode". i have download the firmware but still i cant flash it. please help me how to unbrick this sisley? sorry for my bad english.
Click to expand...
Click to collapse
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Same problem
Rajaks said:
You can't flash stock firmware because of driver is not installed on PC
Install your Chip set Driver on PC.
( I recommend You to install VCOM driver)
Click to expand...
Click to collapse
I have the same problem. I bought the phone and un-boxed it but it had a Wifi issue as the Wifi would not turn on no matter what i tried so i unlocked the bootloader and added custom TWRP and flashed a lollipop on it and now the Wifi is working but now cant get into recovery mode to flash gapps and all Im getting is: warning invalid image. enter fastboot mode so i need also to know how i can fix that can someone help
i have lenovo sisley s90u 1gb ram,i was updated rom by using lenovo mobile assistant moto. but after updating i can't use google play store ! please help me. how can i use google play store & other google app?
please mail me on: [email protected]
Hi,
i am having trouble with flashing my device Huawei G630-U20. I can't boot it normally or into recovery mode. Also my bootloader is locked so I can't use fastboot to flash partitions and recreate android.
So I tried to use qualcomm Platform multi-download tool. Connected the device and got Com port: Qualcomm HS-USB QDLoader 9008. After that I clicked on Scan&Download but got error "Port isn't ready to download".
Can anyone help me with this?
Thank you
have same problem with LDN-AL30
how to fix
Hi.
I have just downloaded & installed AABox3 Pro v19.05 and I am unable to connect to my Techno LA6.
How do I get it to detect the phone?
Thanks.
bro you device have Qualcomm or Mtk chipset
fastboot or adb or edl
I write it fast, my poco f1 just got hardbricked on fully working custom rom. stuck in edl mode. What to do?
Download firmware from official site. Use qpst to flash in edl mode. Use "no qcn" rom or you will erase imei serial.
azharkhalid said:
Download firmware from official site. Use qpst to flash in edl mode. Use "no qcn" rom or you will erase imei serial.
Click to expand...
Click to collapse
Has anybody tried or confirmed that this works?
i bricked My Alcatel 916a and pls i need a stock rom for 916a-2EAVCO1-S50 and the branding is "Claro Colombia" and how flash the stock rom and drivers pls need help
Pachof said:
i bricked My Alcatel 916a and pls i need a stock rom for 916a-2EAVCO1-S50 and the branding is "Claro Colombia" and how flash the stock rom and drivers pls need help
Click to expand...
Click to collapse
Can you access fastboot or bootloader? Have you installed any custom recovery image before it happened?
I have packaged the firmware, flash tool and the drivers in the zip file below.
Install Mediatek Drivers First.
Then Restart your computer.
Open Device Manager and then switch off the device and connect it to your computer and see if the device is detected in PORTS section of device manager as MTK Preloader if not then press and hold both volume keys and then connect it to computer and see if the device is detected.
Open SP Flash Tool load the scatter firmware and click on flash.
Download firmware.
Ohdude said:
Can you access fastboot or bootloader? Have you installed any custom recovery image before it happened?
Click to expand...
Click to collapse
no i dont have access to fastboot or bootloader
mvikrant97 said:
I have packaged the firmware, flash tool and the drivers in the zip file below.
Install Mediatek Drivers First.
Then Restart your computer.
Open Device Manager and then switch off the device and connect it to your computer and see if the device is detected in PORTS section of device manager as MTK Preloader if not then press and hold both volume keys and then connect it to computer and see if the device is detected.
Open SP Flash Tool load the scatter firmware and click on flash.
Download firmware.
Click to expand...
Click to collapse
i tested and get a error "Storage type mismatch, scrater storage type is HW_STORAGE_NAND target storage type is HW_STORAGE_NONE"