Need help with ME302C (memopad fhd10) and unknown root firmware - Android Q&A, Help & Troubleshooting

Hello there,
I have this Asus ME302C that I have no idea what to do with. It has some kind of custom rom on it. However I have no way of getting the firmware version off of it to re-root it or make it like factory again. It's running on 4.3 but when I go to about and in the settings the build number does not say the firmware like it should. Just says something about local build. It does say 4.3 Jss15Q WW_epad_Local_build with a 20130415 at the end.
I'm kind of at a loss. Is there any way I can figure out what the firmware version actually is? Or is there an easy way to restore the thing? I tried KingoRoot and it failed, but did say it was infact rooted.

flickyourbic said:
Hello there,
I have this Asus ME302C that I have no idea what to do with. It has some kind of custom rom on it. However I have no way of getting the firmware version off of it to re-root it or make it like factory again. It's running on 4.3 but when I go to about and in the settings the build number does not say the firmware like it should. Just says something about local build. It does say 4.3 Jss15Q WW_epad_Local_build with a 20130415 at the end.
I'm kind of at a loss. Is there any way I can figure out what the firmware version actually is? Or is there an easy way to restore the thing? I tried KingoRoot and it failed, but did say it was infact rooted.
Click to expand...
Click to collapse
Bump, any help is greatly appreciated.

If I've understood what you want to do from the post in the other thread. Check out this post http://forum.xda-developers.com/showpost.php?p=55268403&postcount=542

Related

[Q] Need help on flashing stock

Hi guys,
I posted a question similar to this before, but did not get much reply.
I have a chinese Razr, and I would like to install an English stock 4.1.2 onto it. This is mostly because for some reason gapps do not work and I really do want gapps.
I have not flashed phones for two years so I have no idea what everything is. And it seemed like all these requires root. Which is my other problem: I cannot install root on this phone no matter what I try. Someone suggested to me that this was because someone had rooted this phone before in an unconventional way and this locked the phone for any future roots. And when I had updated to 4.0.4 I had lost the root and cannot regain it. I must have tried 20 different methods to root this phone already so I'm pretty sure this is hopeless until I flash a different rom.
In any case, my android version is 4.1.2 and system version is 672.300.384.XT910ChinaRetail.en.CN
And I would like to flash a stock 4.1.2 on it.

[Q] SGH I337 bricked with Knox bootloader

Hello everybody,
Greeting!
I've got Samsung S4 SSGH I337 bricked. I was on 4.2.2 until I was curious to get the 4.4 update. However, after reading on the forums it said you cannot upgrade to 4.4 directly (Except OTA which I never got). You first need to upgrade to 4.3 and then upgrade to 4.4 using the update patch. All went successfully until I though 4.4 seem no good to me as the root method was not available and I personally didn't find 4.4 to be much different than 4.2.2.
I tried to downgrade, without knowing a thing about Knox, by updating a ATT Stock Root MF3.zip update. It went through but with some errors, which I don't remember. I was still with the same 4.4 as the update was a waste.
I then tried to downgrade to 4.2.2 flashing the I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar with Odin. This never worked and I bricked my phone. The phone is not unable to boot and comes up with a screen - Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies doesn't recognize the device. It just keep saying "Connecting". I later learnt that it's the Knox Bootloader that is not downgrade able. I tried flashing the leaked 4.4 firmware for SGH I337 to no luck.
Please help!
Thanks a ton in advance!
Nilesh
Nvm guys...
I figured it out myself and the issue has been resolved.
Thanks
Nilesh
nilesh.david said:
Hello everybody,
Greeting!
I've got Samsung S4 SSGH I337 bricked. I was on 4.2.2 until I was curious to get the 4.4 update. However, after reading on the forums it said you cannot upgrade to 4.4 directly (Except OTA which I never got). You first need to upgrade to 4.3 and then upgrade to 4.4 using the update patch. All went successfully until I though 4.4 seem no good to me as the root method was not available and I personally didn't find 4.4 to be much different than 4.2.2.
I tried to downgrade, without knowing a thing about Knox, by updating a ATT Stock Root MF3.zip update. It went through but with some errors, which I don't remember. I was still with the same 4.4 as the update was a waste.
I then tried to downgrade to 4.2.2 flashing the I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar with Odin. This never worked and I bricked my phone. The phone is not unable to boot and comes up with a screen - Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Kies doesn't recognize the device. It just keep saying "Connecting". I later learnt that it's the Knox Bootloader that is not downgrade able. I tried flashing the leaked 4.4 firmware for SGH I337 to no luck.
Please help!
Thanks a ton in advance!
Nilesh
Click to expand...
Click to collapse
Uh Oh
nilesh.david said:
Nvm guys...
I figured it out myself and the issue has been resolved.
Thanks
Nilesh
Click to expand...
Click to collapse
What was the fix? I just did the same thing you did and am not sure now to fix it.

[Q] Updated to 4.4.2 I9205XXUDNE4 from 4.2.2 I9205XXUCNA3 and want to roll back

Hi!
As stated above, I tried updating to the Kit Kat Release for Portugal's I9205 from an asian I9205. Testing out the device, mobile data won't activate and gives me a "Please Insert SIM" error. Because of this, I wanted to roll back to 4.2.2 but seem to be encountering an error in ODIN, primarily one that says "Check Fail Fused 2 > Binary 1".
My question is, how would I be able to revert to 4.2.2? Any help would be appreciated.
Thanks!
Unfortunately, upgrading to KK is one way road... after installing KK there is not possible to downgrade because of new bootloader and efuse in kernel. If you want to go back to good old 4.2.2 let flash MegaFireV10 ROM from @ megalomanic14 which is greatly improved stock 4.2.2 and is already rooted. I could be flashed onto KK without consequences. Simple flashing back stock 4.2.2 could make your phone brick.
Oh, so there's no way for me to roll back? That sucks!
If I flash a new custom ROM, like LiquidSmooth, would my ability to use my mobile data be restored? What's affecting it at any rate? The Modem? Is there anything I could flash that could help?
Would restoring it via KIES work?
trurl3 said:
Unfortunately, upgrading to KK is one way road... after installing KK there is not possible to downgrade because of new bootloader and efuse in kernel. If you want to go back to good old 4.2.2 let flash MegaFireV10 ROM from @ megalomanic14 which is greatly improved stock 4.2.2 and is already rooted. I could be flashed onto KK without consequences. Simple flashing back stock 4.2.2 could make your phone brick.
Click to expand...
Click to collapse
trul3 is giving good advice!!! flash the Megafire v10 rom..it looks and feels like the stock 4.2.2 rom with a few extra apps on it..
You'll be pleased and just May get your mobile data restored!
good luck
I did a Nandroid backup and restored that after trying NE4. The only change is the baseband is now NE4 but I am back on MH2. Is this not normal?

Noob Needs Help Updating TF201 to Lollipop 5.0..... I'm lost

Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
I've been happily using:
http://forum.xda-developers.com/transformer-prime/development/rom-katkiss-5-1-tf201-22-t3080892
The first steps have the directions to get you up and running.
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
When it comes to ROMs there are a few things I always do, first make a backup of any files you might need should you manage to brick your tablet (search the forums, theres plenty of info on how to do it) then have a full nandroid backup of your current working setup to revert to should a brick happen (this can be done through your Recovery Program {TWRP,CWM} and I do it twice for good measure) then update any software you might need to in order to install the ROM of your choice then follow the install instructions for the ROM you want to install. I think for Lollipop KatKiss is probably one of the best if not the best Lollipop ROM, I have used it for a couple weeks and had no issues. I am currently running a BETA of marshmallow which has some weird issues on my Prime, so I would say Marshmallow is not yet there in terms of stable everyday use, but in due time it will be. Hope it helps, feel free to ask me any questions you might have.
chardsregards said:
Hi all,
I really need to get lollipop on my Transformer Prime I know my way around the tablet pretty well but am new to ROMs and rooting. I've done some very basic stuff by following youtube videos but cannot figure out how to update it to lollipop. Everytime I read instructions on the forums I get completely lost. I am a pilot and have been using my TF201 for 4 years now for flying. The app I use isn't compatible with my old firmware anymore. I would really appreciate if someone would be kind enough give me some very dumbed down instructions on how to update my device's firmware. It's either I figure out how to do this, or go broke on a new tablet. Your guy's help would do me a huge solid. For the purposes of this I already factory reset my tablet to undo my current rooting mess and updated it back to version stock 4.1.1
Click to expand...
Click to collapse
Chards, I'm a pilot too! Good luck with the root. In a nutshell, you need to do the "Flatline" method to get nvflash enabled. Follow their tutorial and make all the backup files... really. After that you're bullet proof. From there use the nvflash guide to upgrade the bootloader to Hairy bean. No you can't just flash it. You can't downgrade it... nothing. The only way to get the hairybean bootloader is to "unblob" it and flash it directly with nvflash. After that, follow the instructions over at taconikki's threads. Pick 5.0 or his new 6.0. Just follow their directions and you'll be all set. Best of luck!

S4 (i545) - Is it possible to restore to stock from Lollipop?

I have an S4 (SCH-i545) that was upgraded to Lollipop 5.0.1 (VRSGPL1). I'd like to upgrade it to a plain vanilla android, but from what I've read, it sounds like the PL1 bootloader will prevent me from changing the OS.
I was thinking that I might be able to do a complete wipe and restore the phone back to factory (VRAUAMDK) by flashing a stock firmware such as SCH-I545_MDK_562219_Stock_Restore.tar.md5 with Odin. My thought is that would also replace PL1 with the old MDK bootloader.
I can't come up with a clear idea whether that will work or not based on wheat I've read here and elsewhere, so I was hoping that there someone here who has a better understanding of the system could share their thoughts. Will this work, or will it brick my phone?
DingoKidneys said:
I have an S4 (SCH-i545) that was upgraded to Lollipop 5.0.1 (VRSGPL1). I'd like to upgrade it to a plain vanilla android, but from what I've read, it sounds like the PL1 bootloader will prevent me from changing the OS.
I was thinking that I might be able to do a complete wipe and restore the phone back to factory (VRAUAMDK) by flashing a stock firmware such as SCH-I545_MDK_562219_Stock_Restore.tar.md5 with Odin. My thought is that would also replace PL1 with the old MDK bootloader.
I can't come up with a clear idea whether that will work or not based on wheat I've read here and elsewhere, so I was hoping that there someone here who has a better understanding of the system could share their thoughts. Will this work, or will it brick my phone?
Click to expand...
Click to collapse
I too would like to know if this is viable. I doubt it, seeing as I can't find any threads outlining this solution. But an explanation as to why this won't work would be greatly appreciated!
ItsBeenFun2017 said:
I too would like to know if this is viable. I doubt it, seeing as I can't find any threads outlining this solution. But an explanation as to why this won't work would be greatly appreciated!
Click to expand...
Click to collapse
DingoKidneys said:
I have an S4 (SCH-i545) that was upgraded to Lollipop 5.0.1 (VRSGPL1). I'd like to upgrade it to a plain vanilla android, but from what I've read, it sounds like the PL1 bootloader will prevent me from changing the OS.
I was thinking that I might be able to do a complete wipe and restore the phone back to factory (VRAUAMDK) by flashing a stock firmware such as SCH-I545_MDK_562219_Stock_Restore.tar.md5 with Odin. My thought is that would also replace PL1 with the old MDK bootloader.
I can't come up with a clear idea whether that will work or not based on wheat I've read here and elsewhere, so I was hoping that there someone here who has a better understanding of the system could share their thoughts. Will this work, or will it brick my phone?
Click to expand...
Click to collapse
You can not down grade to bootloader. You might be able to safestrap it but im not sure. I believe all you need is root, safestrap, and a compatible rom.

Categories

Resources