Hello,
I am new here, so if I posted this topic in the wrong section, sorry.
I have a GT-S5839i (yes, with nine so no typo) which is bricked, it can't turn on, it is stuck at the boot screen.
I can go into recovery, what should I do?
Do I need to flash a stock ROM?
Options as "Wipe data / factory reset" or "Wipe cache" also don't work.
I'm Dutch, so it could be that my English is bad, but I'm trying to improve it.
Thank you very much for helping me, I would appreciate it!!
edit: I see I placed it in the wrong section, could a mod move it? Thanks!
brickedgts5839i said:
Hello,
I am new here, so if I posted this topic in the wrong section, sorry.
I have a GT-S5839i (yes, with nine so no typo) which is bricked, it can't turn on, it is stuck at the boot screen.
I can go into recovery, what should I do?
Do I need to flash a stock ROM?
Options as "Wipe data / factory reset" or "Wipe cache" also don't work.
I'm Dutch, so it could be that my English is bad, but I'm trying to improve it.
Thank you very much for helping me, I would appreciate it!!
edit: I see I placed it in the wrong section, could a mod move it? Thanks!
Click to expand...
Click to collapse
Hello, welcome to XDA and just ask mods. to move this thread. But just one time only that I can say, u need to flash stock rom sincerely.
RevolutionBolt said:
Hello, welcome to XDA and just ask mods. to move this thread. But just one time only that I can say, u need to flash stock rom sincerely.
Click to expand...
Click to collapse
Okay, I will do that! Thanks for your help!
I will install this one: http://forum.xda-developers.com/showthread.php?t=2258319
It did not work, unfortunately, just like some other tips, and also the thread from supermini did not work.
I can't even go into download mode, I think I will bring it to the shop where I bought it and that I did an update with Kies, but that I wasn't able to start it.
Thanks for your help!!
Just flash stock rom with Odin.Go on to downloadmod(volume+ and volume- together and power buttons)
brickedgts5839i said:
It did not work, unfortunately, just like some other tips, and also the thread from supermini did not work.
I can't even go into download mode, I think I will bring it to the shop where I bought it and that I did an update with Kies, but that I wasn't able to start it.
Thanks for your help!!
Click to expand...
Click to collapse
Go to samsung service centre or any mobile repairing shop and tell them to flash your device..
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
U can flash cm based roms if u r recovery mod is working
[solved]
Hi,
I'm sorry for the very late reaction, but my dad brought it to the Vodafone shop and they have let it fix. So it's working now I tried to used Odin, but it did not work. My dad is using it now, I have a Galaxy Note 1 (N7000) which is overclocked and undervolted:
1748 mhz (stock 1400): 1500 mV (+200 mV)
1200 mhz: 1100 mV (-175 mV)
1000 mhz: 1000 mV (-175 mV)
800 mhz: 950 mV (-150 mV)
500 mhz: 900 mV (-100 mV)
200 mhz: 850 mV (-125 mV)
I have used Tegrak Overclock Ultimate.
Thanks all for your help!
Related
[ROM] GINGERBREAD & FROYO "Remi-X10 mini pro" XL & XS, (New corners style)/ [deleted]
The Rom is no longer available.
Due to continuous requests for support and / or update requests to share some graphics depending on the needs that come to me that I can not fulfill for lack of time I feel obliged to delete that forum from Rom.
It does not seem right to leave here with the rom of my continuous questions intervention I can not answer because of personal commitments to which the Rom
been deleted.
This also does not seem to me a little courtesy to those questions that could not be answered.
I thank the entire community of xda.
English please......
BTW:
i think the rules says only english is allowed.. you should look the forum rules...
Touch Screen not working!
solution please...
vincenttan89 said:
Touch Screen not working!
solution please...
Click to expand...
Click to collapse
go to xrecovery and restore your backup...
btw, can someone please upload the file to multiupload i dont like rapidshare links...(im in a public wireless area :S )
i want to grab the launcher APK :b
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
royalbloodvi said:
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
Click to expand...
Click to collapse
i dunno... ive just downloaded it now... i will try and them i post my feedback here :b
it is not working.... briked my device...
Dont flash it will brick your device
PTGamer said:
Dont flash it will brick your device
Click to expand...
Click to collapse
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Can someone make a SE style (XPERIA Arc) with latest CM7 by Slade?
It will be awesome...
Thanks
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
Regarding the problem of the touch screen the only THOUGHT that I got for now is to first to load the rom to change system / lib / modules
1) File "x8gesture" update it to version 6
2) Delete file "cy8ctma300_ser"
While in etc, change the file "hw_config" and put the one you use normally.
Now zipped and run the installation steps.
I do not know if it works, and only a test.
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
flashed the fw... got stuck on se logo... xrecovery not working... now ive got to go home and restore with seus..
you should try b4 post...
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
you don't have to flash the fix i already included it
I can not understand where the problem is.
I do not know whether or not charged as it was pointed out a problem with touch screen.
owain94 said:
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
Click to expand...
Click to collapse
Owain94 Thank you for your assistance.
antonio89drop said:
Owain94 Thank you for your assistance.
Click to expand...
Click to collapse
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
owain94 said:
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
Click to expand...
Click to collapse
tested and is working now we just need to find if is there some bugs.
btw keyboard light al always on. i will tessting further
EDIT: bug cant see letters in timescape and cant login
working:camera and video, multitouch, market (but looks like i need to wipe dalvik beacuse i cant download), walkman, browser, wifi this is for now
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
slade87 said:
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
thank you sir
hmmm.... downloading now...
i will tell if find bugs to fix....
thx owain for ur assistan, btw I think u should update main page with the newer version, no all people read all replys...
Can anyone help me to root my karbonn smart tab 8?
You can root Smart Tab 8 and Smart tab 10 by following the method of rooting used by Ainol Novo 7 Crystal as it uses the same Chipset and is running JB 4.1.1 and almost all the specs are the same too.
Download the Crystal_Root.zip from attachments and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Crystal, Power Off and remove the charger cable.
Insert the microSD card into your Crystal
Get into Recovery mode.
In the recovery you can move with the Volume- button, you can select with Power or Volume+
Select the apply update from EXT option
Select the Crystal_Root.zip, this will install the package
Wait for the update to finish
Select reboot system now
Follow the instructions properly and it should work.
THANKS
THANK YOU SO MUCH BUDDY IT WORKED
THANKU SO MUCH :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
Glad that I could help.
---------- Post added at 11:24 PM ---------- Previous post was at 11:07 PM ----------
Please change the title of the thread and also the first post to help people root their ST8 and ST10. Link to my post in your first post.
Hey Guys Have Made A Video About Successful Rooting!!
hhttp://www.youtube.com/watch?v=OfGjvjb0izc
Credits Fly Out to Ankit for the same. IT WORKS!
Enter Recovery By Shutting Off & then Keeping the Volume DOWN Button Pressed Along with Power Till the Tablet Boots up. Then Let Go of the Power Button, But Keep the Volume DOWN Button Pressed.
Here's a video to see how to Enter Recovery For Karbonn Smart Tab 8 Velox:
http://www.youtube.com/watch?v=jhC_V35yC7Y
Strange that this tablet is using JB Phone UI. We can change it to Tablet UI which looks much better. Can someone tell me what's the value of lcd density in the build.prop.???
Title
ankitdaruler said:
Glad that I could help.
---------- Post added at 11:24 PM ---------- Previous post was at 11:07 PM ----------
Please change the title of the thread and also the first post to help people root their ST8 and ST10. Link to my post in your first post.
Click to expand...
Click to collapse
How to change title
Sandee999 said:
How to change title
Click to expand...
Click to collapse
Edit your first post. You'll get the title there. Anyways can you post videos of HD games which are running on this tab??
I've bought ST 10 instead of ST 8 and this method of rooting is working pretty well on that too. :good:
Thanks a lot, it worked on Karbonn Cosmic ST10 like a charm. Now the next step would be to port CWM Recovery to the tablet.
Head over the following link for ST8 & ST10 developments(swapping,rooting). http://forum.xda-developers.com/showthread.php?p=36867952#post36867952
Hi ankitdaruler,
I too owned this Karbonn Smart Tab 8 and finally i rooted it following your method.
I have also successfully swapped the internal and external Cards in the device again using your vold.fstab file
I registered here just to thank u mate and even disclose that your found exploit really work's on ST8.
I can't post here = http://forum.xda-developers.com/showthread.php?t=2105692 as i am not allowed too. Begin a new member.
But i would soon post my finding there.
Thanks a lot mate. :good:
Karbonn st8 rooting
Thanks , I have rooted my Karbonn ST8 with the above instructions
Rooting was successfully completed. Thankyou again
Saurabh_Joshi said:
Hi ankitdaruler,
I too owned this Karbonn Smart Tab 8 and finally i rooted it following your method.
I have also successfully swapped the internal and external Cards in the device again using your vold.fstab file
I registered here just to thank u mate and even disclose that your found exploit really work's on ST8.
I can't post here = http://forum.xda-developers.com/showthread.php?t=2105692 as i am not allowed too. Begin a new member.
But i would soon post my finding there.
Thanks a lot mate. :good:
Click to expand...
Click to collapse
Most Welcome mate. Anyways you can share your findings here too. You'll get the credits for your work. Don't worry about that. :good:
I have made the CWM Recovery using Recovery Builder, made the update zip and signed it too. So can anyone just please test it by flashing it through stock recovery. My tab is not with me right now. So please let me know whether it's working or not so that I can release it officially. Download the zip from the attachment.
Hi guys is there any way to change the phone UI in the karbonn smart tab 8 velox to tablet UI, cause im really getting tired of using the phone UI in my 8' tablet.
cooldude9119 said:
Hi guys is there any way to change the phone UI in the karbonn smart tab 8 velox to tablet UI, cause im really getting tired of using the phone UI in my 8' tablet.
Click to expand...
Click to collapse
Even i am looking for the same At least i want to experience it once. So that i can decide which one suit me better. Anyone knows how to do it? BTW my device is rooted.
---------- Post added at 10:33 PM ---------- Previous post was at 10:24 PM ----------
ankitdaruler said:
I have made the CWM Recovery using Recovery Builder, made the update zip and signed it too. So can anyone just please test it by flashing it through stock recovery. My tab is not with me right now. So please let me know whether it's working or not so that I can release it officially. Download the zip from the attachment.
Click to expand...
Click to collapse
I love to help. But i would love to have the original stock recovery image as well, so that in worst case i have some backup method. But still i want to know how to go about it? Any way to backup stock recovery and then load it again if things go wrong ?
Need Karbonn Smart Tab 8 build.prop
Hi Guys,
Can anybody provide me build.prop from Karbonn Smart Tab 8?
Thanks in advance.
Regards,
Siddharth
siddharthk said:
Hi Guys,
Can anybody provide me build.prop from Karbonn Smart Tab 8?
Thanks in advance.
Regards,
Siddharth
Click to expand...
Click to collapse
I have already PM'ed you. Or is this post before you asked me via PM?
To go to Tablet Mode install Apex launcher and choose tablet mode. Its great
My Question: How to unroot and revert to stock? Before anybody roots this escape plan should always be there.
Sent from my ST8 using xda app-developers app
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
pciccone said:
for help....
Click to expand...
Click to collapse
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
What steps did you use to root it and what kit?
pciccone said:
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
Click to expand...
Click to collapse
Did everything work out okay.
Sorry to bother you but I have been trying to find for the last few weeks the steps to root this phone "Hydro elite", Can you provide me with the steps or a link to the steps and tools you used. Thank you kindly.
fallenangelguard said:
Did everything work out okay.
Sorry to bother you but I have been trying to find for the last few weeks the steps to root this phone "Hydro elite", Can you provide me with the steps or a link to the steps and tools you used. Thank you kindly.
Click to expand...
Click to collapse
Use the 2nd option in Framaroot 1.6.1
Do it at your own risk.
Thank you
pciccone said:
Use the 2nd option in Framaroot 1.6.1
Do it at your own risk.
Click to expand...
Click to collapse
By the way did you get yours back to normal running order?
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
Thanks for posting this for me. It's a 12 hour download, but should work fine for me!
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
I cannot thank you enough! I am back working again! You ROCK!
pciccone said:
I am back
Click to expand...
Click to collapse
to you for breakfast)
Tell what Verizon unnecessary programs you deleted?
If your service provider Verizon, ask them whether the phone would support LTE in Europe
fallenangelguard For me works getting ROOT using motochopper http://forum.xda-developers.com/showthread.php?t=1940630
Need files
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
Please help.
mwuahjaan said:
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
Please help.
Click to expand...
Click to collapse
see mail
How to put Kyocera Hydro Elite on Diagnostic Mode
Can anyone share details
pciccone said:
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
Click to expand...
Click to collapse
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
My friend is in the same situation. She had just finished rooting her phone and accidentally deleted some system files. Is it possible that one of you could send me a copy of that zip so that I can try to fix her phone?
Thanks in advance!
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
firmware version 4.1.2 software modem 1.203VZ 2.006vz build number JZ054K from 27.11.2013
Please help.
sorry for my english
i need help
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
will this get me out of a bootloop? if so, will you send it to [email protected] would be greatly appreciated.
i messed up my wife's phone and now it won't boot
Sent from my XT862 using XDA Free mobile app. Pleaseee Can you send me the hydro elite system apks and what to do please? link I'm havin the same problem where I uninstalled the wrong app and I keep getting that popup com.phone has stopped working. Pleased I'm in need
---------- Post added at 11:55 AM ---------- Previous post was at 11:49 AM ----------
Sent from my XT862 using XDA Free mobile app
Can you please send me the hydro elite system apks and what to do please? link I'm havin the same problem where I uninstalled the wrong app and I keep getting that popup com.phone has stopped working.
need files
zema77 said:
see mail
Click to expand...
Click to collapse
can you send me the link ([email protected]) and the process of doing it. i really need this the same thing happened to me and i need to restore my phone!!!! im really in need for this.
system Kyocera c6750
Today I responded to all requests for system Kyocera c6750 in Private Messages. If someone has the ability, publish my link to the forum. My level does not allow to post a link to the forum.
+ at the current time the most complete information about the system \ setup \ recovery \... Kyocera HYDRO ELITE C6750 is on the Russian forum 4pda. I can not post a link, use search google "kyocera hydro elite c6750 4pda.ru"
Ok so ho do I use this?
Sent from my XT862 using XDA Free mobile app
---------- Post added at 07:55 PM ---------- Previous post was at 07:14 PM ----------
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
how do you use the zip?
CAN SOMEBODY JUST HELP ME BRING MY PHONE BACK TO LIFE!!!!!!!!!!!!!!!!!!!!!!!!! Goshhhhhhhhhhhhhhhhh
Kyocera c6750.zip 850 MB
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
[email protected] thank you much send the link to this mail.:good::angel:
what custom roms are available for this device.
ARCHOS 50 OXYGEN
and if there is no roms, can our rom developers help us making some jellybean or kitkat roms for the device.
thank you.
Hi !
Well.. I've an Archos 50 Oxygen too and after looking in all French android websites, I don't find anything about customs roms for our device.. I 'd like to know : is your 50 Oxygen rooted ? Thx
Sent from my Archos 50 Oxygen using XDA Free mobile app
Hi all,
I have such a device too. I found no custom rom for it.
I have another problem. Did one of you have problems with updating the firmware? I am stuck on the FW from 2013 and I can not install the one from Archos Homepage -.-
And another strange thing: I only have 8 Megapixels! Whats wrong with my device? It is definetly an oxygen 50 (no b no c)!
I rooted it, but I just can not install this original FW.
Any help would be great
Greets from Germany!
Lupus_3
Hi !
I've the latest version of the firmware installed on my device. How do you try to install it ? On Archos's French website, it's written to download its software to install the firmware. And I check with Antutu Benchmark, and I've 13,4 Mpx. Maybe you should delete datas of your camera , or re-install it ?
Sent from my Archos 50 Oxygen using XDA Free mobile app
Hi! Thx for your answer! I tried to install it like it is discribed on the archos Homepage. I put the *.zip in the root of my phone and it should automaticly start the installation.
My phone just dont recognizes this file and if I start the installation manually, it displays a failure during the installation.
I am new to android. So I dont know how to reinstall a firmware -.- Factoryreset didnt change anything.
It would be kind of you, if you could help me. The community is very small for our divice ;-(
If you want to know, I rooted it with frameroot 1.9.3
Greets Lupus_3
Hi again,
I have read about CWM recovery... Maybe this is a way to flash the update manually? So I downloaded "RomManager" and started it. This Program wants to install CWM recovery but my device is not supported. Maybe I am on a good way, but I am scared to go on. I dont want to destroy my phone.
Maybe you can help me with that or you have any other ideas?
Greets Lupus_3
Hi !
I think you should try to install it from the recovery mod... You have to shut down your phone then you will have to restart by pressing the volume down button AND the power button. Then you will arrive in a menu. Navigate with volume buttons to "install zip from sdcard" then select your .zip ROM...I'm not sure it will work...but it should
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 12:44 PM ---------- Previous post was at 12:36 PM ----------
For CWM, I think ROM manager is not important...you have to put cwm file (.zip) at the root of your phone, and then install it as I explained above for the firmware... You can easily find the file on the web...but as you, I don't know what will happen if your phone is snot supported.
Sent from my Archos 50 Oxygen using XDA Free mobile app
Hi!
Thanks for your reply! I allready tried it via recovery, as you explained. The installation begins, but it ends in a failure: "invalid partition setting 20". It is realy strange. Can you dump your Rom and send it to me? Is there a way? Or do you have a recovery ROM or something like that? I am scared to install CWM, because its not supported
FW-infos:
FW on Homepage: X-S05A_ARCHOS_L26EN_209_140526_ota
FW on my Phone : X-S05A_ARCHOS_L26EN_201_130809
Greets Lupus_3
Well, I think you could search if someone had the error message you had on another device. I don't understand : could you explain what you want me to do with my firmware ?
And, I know it's stupid but...what's happen when you go in settings -> about phone -> system updates ?
Sent from my Archos 50 Oxygen using XDA Free mobile app
I searched for it allready with no luck
If I try the OTA update via wifi, it says "networkconnection failed" and "System is up to date" (translated).
Forget my idea with your firmware. I think, it will not work, without custom bootloader
I just have no clue what I could do. I think the only way would be a custom bootloader, but I am too scared... And I think we will never get support for our phones -.-
Could you please check your "Build-Number" in settings -> about phone -> Build-Number (at bottom) and post it?
Greets Lupus_3
Well I think I'm up tout date
Bulid : X-S05A_ARCHOS_L26EN_209_140526
Sent from my Archos 50 Oxygen using XDA Free mobile app
Yeahhh! Congrats! You have the FW I want to install ^^ How many points do you have in Antutu Bench? I have somewhat about 17000. I have to restart my phone once a day or some games crash... It would be nice if I coud install a backup from your FW ^^ But without custom bootloder...
I wrote my story in 3 forums and you are the only one responding... Thanks for that! Do you have any software with your phone? Maybe a program for PC? I have nothing..
Greets Lupus_3
For the benchmark...I've the same
Sometimes it freezes but it's quick. I just had big problems (I had to reboot my phone) with apus launcher...
Sent from my Archos 50 Oxygen using XDA Free mobile app
You're welcome For the backup of my firmware, no problem, I just have to think about how to extract and send it
Sent from my Archos 50 Oxygen using XDA Free mobile app
Ah, ok. So my phoneporformence seems to be ok. I thougt there could be a problem, because my offlinemap in c:geo is very slow... My Nokia 808 is a lot faster with that. I thougt quadcore would be fast ^^
I have RAM Booster installed and it speeds ab the sytem a little, but not mach.
Greets Lupus_3
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I think for extracting and installing your FW both of us need a custom bootloader... But maybe I'm wrong ^^ Rooting is easy, but this loaderthing is not ;(
Greets Lupus_3
Yeah we are both rooted so there is a solution...I think there is an app to do that And I will search a custom bootloader I've a little ram booster, but I know that we can swap ; it means that you let some space (maybe 512Mo) in your internal storage and it is adding to your RAM
But, I had a question, do you have any problem with network ? I mean that I enable or disable datas but it's not working..
Sent from my Archos 50 Oxygen using XDA Free mobile app
It would be great, if we could find a way to install a custom bootloader savely!
So you expand your ram with a program? Does this work good? What is the name of that program?
I do not do anything with mobile internet on that phone, so I can not give a good answer to your question. But I can say everything is fine via wifi!
Greets Lupus_3
I found something here: http://www.droidviews.com/how-to-un...-root-asusgoogle-nexus-7-on-jelly-bean-4-2-1/
It is a Guide for the Nexus 7 on Android 4.2.1... As far as I know our Android is an untouched one like on the Nexus-devices.
But I do not know if we could use this guide, because it is 4.2.1...
Greets Lupus_3
Welll....I think that it's a great idea to unlock the boot loader But I am not an android professional so I don't know lots of things about boot loader
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 08:26 PM ---------- Previous post was at 08:17 PM ----------
I find on a French website that unlocking bootloader allows you to install customs Roms but you won't be able to update firmware with a computer or OTA !
Maybe I get something very helpful !
Have you ever installed ROM installer from Jrummy Apps ? Maybe you could install your .zip firmware In addition, maybe I will be able to backup my firmware to a .zip if yours is not valid
I'm searching about that
Im not a professional too, but maybe we can achive something together I had a ROM loader installed, but you need to install this CWM for doing something good with that. That was the point where I stopped ^^
But maybe your loader is anotherone? I dont really know.
Greets Lupus_3
Hi !
I'm searching a way to send you my firmware but I don't find yet. My app actually don't work without a custom bootloader. But maybe I can extract it directly from a computer ? Maybe this is a good way
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 10:20 PM ---------- Previous post was at 10:13 PM ----------
I don't know if you can read French but I find something interesting ! If I understand well what is written, you can extract different parts of your firmware from your computer.
http://forum.frandroid.com/topic/19...nal-au-format-kdz-avec-kdz-and-tot-extractor/
Hi!
I can not find a way without having that bootloader... THX for your help, but I can't read french. I had russian at school ^^ The german sites dont help either -.-
Greets Lupus_3
lg volt 2 ls751
can anyone please post their stock system rom because i cant seem to to boot up mine (its a boost mobile model) cant get past the boost logo screen i've tried to boot into recovery and wiping data and cache nothing happened still stuck
lg volt 2 ls751
I killed mine too and can't get kingroot or kinguser etc. out of the firmware. halps!
---------- Post added at 10:10 PM ---------- Previous post was at 09:23 PM ----------
okay so I managed to un-**** mine. what you do is first ensure your phone is off, then hold down the volume down button then press and hold the home/power button until you get the restore mode screen. using your volume up and down to navigate and using thelock/power button to confirm, reseteverything it gives you the option to. from there reboot and it should be okay if our problems were in fact the same.
mazrik666 said:
I killed mine too and can't get kingroot or kinguser etc. out of the firmware. halps!
---------- Post added at 10:10 PM ---------- Previous post was at 09:23 PM ----------
okay so I managed to un-**** mine. what you do is first ensure your phone is off, then hold down the volume down button then press and hold the home/power button until you get the restore mode screen. using your volume up and down to navigate and using thelock/power button to confirm, reseteverything it gives you the option to. from there reboot and it should be okay if our problems were in fact the same.
Click to expand...
Click to collapse
it didnt work its probably a problem with my system and i still need a stock rom. so can you please make a backup of your system framework and send me a link to it please because it keeps saying problem with my framework when i use a stock recovery log please make a backup so i can download it and install it from my sd card
any updates on this guys?
mhowland24 said:
any updates on this guys?
Click to expand...
Click to collapse
Nope can you help us out?
please for the love of god anyone help
I have a Volt 2, and I'm willing to help if you still need it. Unfortunately, you're going to have to walk me through the process because I have zero knowledge of how to do it. You can reply to me on here, or send me an email, [email protected]
LG Volt 2/ LGLS751
SAMESIES
Did anyone ever figure this out?
durdypurdy563 said:
I have a Volt 2, and I'm willing to help if you still need it. Unfortunately, you're going to have to walk me through the process because I have zero knowledge of how to do it. You can reply to me on here, or send me an email, [email protected]
LG Volt 2/ LGLS751
Click to expand...
Click to collapse
can you help did anyone talk you through the process???
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Hmm I had no trouble rooting my volt 2 before the stagefright patch it seems like people are having issues after the fact.
Also I'd like to work on figuring out a bypass so we can get cyanogenmod ported on to the Volt 2. Where would the best place br to start looking for a bypass method?
Volt2 said:
Hmm I had no trouble rooting my volt 2 before the stagefright patch it seems like people are having issues after the fact.
Also I'd like to work on figuring out a bypass so we can get cyanogenmod ported on to the Volt 2. Where would the best place br to start looking for a bypass method?
Click to expand...
Click to collapse
Is there even a custom recovery for this phone
junoir0c1 said:
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Click to expand...
Click to collapse
Did you have your phone rooted???
Yet another user of the Boost Lg Volt 2 chiming in.
I managed to brick mine and a hard reset isn't cutting it.
I need a rom for this phone. Any rom at all, stock, rooted, unrooted, I'm not picky.
I supplicate the knowledgeable to make a rom, please.
try stylo
I bricked my volt 2 today , tried LG G Stylo guide (it is the same chip), this one works for me. my volt 2 is back and rooted!
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Did anyone ever figure this out? I'm in need of the stock ROM also. Any help would be great.
junoir0c1 said:
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Click to expand...
Click to collapse
Do you still have this device? If so, can you pull the firmware?
Gracias, señor!
Good lookin' out, buddy. That LG stylo guide took me from brick zero to hero in ten minutes!
onmyroute said:
I bricked my volt 2 today , tried LG G Stylo guide (it is the same chip), this one works for me. my volt 2 is back and rooted!
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Click to expand...
Click to collapse
LG-LS751-5.1.1-Dump.zip stock---still have the phone....works great-if need more
creativetrendz said:
Do you still have this device? If so, can you pull the firmware?
Click to expand...
Click to collapse
K hope this helps...not to sure what i was doing but figured i would try.......LG VOLT 2 LS751 ZIP files.........full dumphope it helps......oh and now my volt 2 is soft bricked from the last update.....pulled the zip off my dads.....doing my sons later for backups!!!! but if anyone has a helpful tip on what the crap i do next to make my volt work again im willing to copy whatever files needed off the working phone and upload for everyone........i need to know how though!!!.............hope this one is right............the build.prop file is in there.......
uploading to google drive now....be an hour at least with my connection.....soit is titled LG-LS751-5.1.1-Dump.zip from [email protected]
i will try to put a link to it up when its done.....but just incase i forget LOL.....
---------- Post added at 12:42 PM ---------- Previous post was at 12:39 PM ----------
Gadget8my8 said:
K hope this helps...not to sure what i was doing but figured i would try.......LG VOLT 2 LS751 ZIP files.........full dumphope it helps......oh and now my volt 2 is soft bricked from the last update.....pulled the zip off my dads.....doing my sons later for backups!!!! but if anyone has a helpful tip on what the crap i do next to make my volt work again im willing to copy whatever files needed off the working phone and upload for everyone........i need to know how though!!!.............hope this one is right............the build.prop file is in there.......
uploading to google drive now....be an hour at least with my connection.....soit is titled LG-LS751-5.1.1-Dump.zip from [email protected]
i will try to put a link to it up when its done.....but just incase i forget LOL.....
Click to expand...
Click to collapse
dont know how to pull firmware.....unless thatswhat i did.....send me email tutorials of whatever ya want please....
and if this one isn't right......please a guide on how to do it right! THANKX
there is too many files there
i heard that they make from these files flashable firmware
and there is also ls751
any one have idea how to deal with this ?
this is the link :
opensource.lge(dot)com/osList/list?curPage=2&m=Mc001&s