[q] custom roms are required for archos 50 oxygen - Android Q&A, Help & Troubleshooting

what custom roms are available for this device.
ARCHOS 50 OXYGEN
and if there is no roms, can our rom developers help us making some jellybean or kitkat roms for the device.
thank you.

Hi !
Well.. I've an Archos 50 Oxygen too and after looking in all French android websites, I don't find anything about customs roms for our device.. I 'd like to know : is your 50 Oxygen rooted ? Thx
Sent from my Archos 50 Oxygen using XDA Free mobile app

Hi all,
I have such a device too. I found no custom rom for it.
I have another problem. Did one of you have problems with updating the firmware? I am stuck on the FW from 2013 and I can not install the one from Archos Homepage -.-
And another strange thing: I only have 8 Megapixels! Whats wrong with my device? It is definetly an oxygen 50 (no b no c)!
I rooted it, but I just can not install this original FW.
Any help would be great
Greets from Germany!
Lupus_3

Hi !
I've the latest version of the firmware installed on my device. How do you try to install it ? On Archos's French website, it's written to download its software to install the firmware. And I check with Antutu Benchmark, and I've 13,4 Mpx. Maybe you should delete datas of your camera , or re-install it ?
Sent from my Archos 50 Oxygen using XDA Free mobile app

Hi! Thx for your answer! I tried to install it like it is discribed on the archos Homepage. I put the *.zip in the root of my phone and it should automaticly start the installation.
My phone just dont recognizes this file and if I start the installation manually, it displays a failure during the installation.
I am new to android. So I dont know how to reinstall a firmware -.- Factoryreset didnt change anything.
It would be kind of you, if you could help me. The community is very small for our divice ;-(
If you want to know, I rooted it with frameroot 1.9.3
Greets Lupus_3
Hi again,
I have read about CWM recovery... Maybe this is a way to flash the update manually? So I downloaded "RomManager" and started it. This Program wants to install CWM recovery but my device is not supported. Maybe I am on a good way, but I am scared to go on. I dont want to destroy my phone.
Maybe you can help me with that or you have any other ideas?
Greets Lupus_3

Hi !
I think you should try to install it from the recovery mod... You have to shut down your phone then you will have to restart by pressing the volume down button AND the power button. Then you will arrive in a menu. Navigate with volume buttons to "install zip from sdcard" then select your .zip ROM...I'm not sure it will work...but it should
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 12:44 PM ---------- Previous post was at 12:36 PM ----------
For CWM, I think ROM manager is not important...you have to put cwm file (.zip) at the root of your phone, and then install it as I explained above for the firmware... You can easily find the file on the web...but as you, I don't know what will happen if your phone is snot supported.
Sent from my Archos 50 Oxygen using XDA Free mobile app

Hi!
Thanks for your reply! I allready tried it via recovery, as you explained. The installation begins, but it ends in a failure: "invalid partition setting 20". It is realy strange. Can you dump your Rom and send it to me? Is there a way? Or do you have a recovery ROM or something like that? I am scared to install CWM, because its not supported
FW-infos:
FW on Homepage: X-S05A_ARCHOS_L26EN_209_140526_ota
FW on my Phone : X-S05A_ARCHOS_L26EN_201_130809
Greets Lupus_3

Well, I think you could search if someone had the error message you had on another device. I don't understand : could you explain what you want me to do with my firmware ?
And, I know it's stupid but...what's happen when you go in settings -> about phone -> system updates ?
Sent from my Archos 50 Oxygen using XDA Free mobile app

I searched for it allready with no luck
If I try the OTA update via wifi, it says "networkconnection failed" and "System is up to date" (translated).
Forget my idea with your firmware. I think, it will not work, without custom bootloader
I just have no clue what I could do. I think the only way would be a custom bootloader, but I am too scared... And I think we will never get support for our phones -.-
Could you please check your "Build-Number" in settings -> about phone -> Build-Number (at bottom) and post it?
Greets Lupus_3

Well I think I'm up tout date
Bulid : X-S05A_ARCHOS_L26EN_209_140526
Sent from my Archos 50 Oxygen using XDA Free mobile app

Yeahhh! Congrats! You have the FW I want to install ^^ How many points do you have in Antutu Bench? I have somewhat about 17000. I have to restart my phone once a day or some games crash... It would be nice if I coud install a backup from your FW ^^ But without custom bootloder...
I wrote my story in 3 forums and you are the only one responding... Thanks for that! Do you have any software with your phone? Maybe a program for PC? I have nothing..
Greets Lupus_3

For the benchmark...I've the same
Sometimes it freezes but it's quick. I just had big problems (I had to reboot my phone) with apus launcher...
Sent from my Archos 50 Oxygen using XDA Free mobile app

You're welcome For the backup of my firmware, no problem, I just have to think about how to extract and send it
Sent from my Archos 50 Oxygen using XDA Free mobile app

Ah, ok. So my phoneporformence seems to be ok. I thougt there could be a problem, because my offlinemap in c:geo is very slow... My Nokia 808 is a lot faster with that. I thougt quadcore would be fast ^^
I have RAM Booster installed and it speeds ab the sytem a little, but not mach.
Greets Lupus_3
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I think for extracting and installing your FW both of us need a custom bootloader... But maybe I'm wrong ^^ Rooting is easy, but this loaderthing is not ;(
Greets Lupus_3

Yeah we are both rooted so there is a solution...I think there is an app to do that And I will search a custom bootloader I've a little ram booster, but I know that we can swap ; it means that you let some space (maybe 512Mo) in your internal storage and it is adding to your RAM
But, I had a question, do you have any problem with network ? I mean that I enable or disable datas but it's not working..
Sent from my Archos 50 Oxygen using XDA Free mobile app

It would be great, if we could find a way to install a custom bootloader savely!
So you expand your ram with a program? Does this work good? What is the name of that program?
I do not do anything with mobile internet on that phone, so I can not give a good answer to your question. But I can say everything is fine via wifi!
Greets Lupus_3
I found something here: http://www.droidviews.com/how-to-un...-root-asusgoogle-nexus-7-on-jelly-bean-4-2-1/
It is a Guide for the Nexus 7 on Android 4.2.1... As far as I know our Android is an untouched one like on the Nexus-devices.
But I do not know if we could use this guide, because it is 4.2.1...
Greets Lupus_3

Welll....I think that it's a great idea to unlock the boot loader But I am not an android professional so I don't know lots of things about boot loader
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 08:26 PM ---------- Previous post was at 08:17 PM ----------
I find on a French website that unlocking bootloader allows you to install customs Roms but you won't be able to update firmware with a computer or OTA !
Maybe I get something very helpful !
Have you ever installed ROM installer from Jrummy Apps ? Maybe you could install your .zip firmware In addition, maybe I will be able to backup my firmware to a .zip if yours is not valid
I'm searching about that

Im not a professional too, but maybe we can achive something together I had a ROM loader installed, but you need to install this CWM for doing something good with that. That was the point where I stopped ^^
But maybe your loader is anotherone? I dont really know.
Greets Lupus_3

Hi !
I'm searching a way to send you my firmware but I don't find yet. My app actually don't work without a custom bootloader. But maybe I can extract it directly from a computer ? Maybe this is a good way
Sent from my Archos 50 Oxygen using XDA Free mobile app
---------- Post added at 10:20 PM ---------- Previous post was at 10:13 PM ----------
I don't know if you can read French but I find something interesting ! If I understand well what is written, you can extract different parts of your firmware from your computer.
http://forum.frandroid.com/topic/19...nal-au-format-kdz-avec-kdz-and-tot-extractor/

Hi!
I can not find a way without having that bootloader... THX for your help, but I can't read french. I had russian at school ^^ The german sites dont help either -.-
Greets Lupus_3

Related

rooting for first time on 16gb 1.4.3 - please advise

Hello everyone..
I have purchased nook 16 gb 5 months back but barely used it.. I read few books, browse and few movies.. and it plays only .mp4.. so disgusting.. tried to root then,it but didn't find much time.
now when I check its updated to 1.4.3.
please suggest me/links on how to root.. what to root.. I don't even understand what is cwm.. cm9.. I'm an absolute newbie to android and rooting..
Awaiting reply.. Thanks
This is the method I used to root my replacement NT on 1.4.3. Worked perfectly.
http://forum.xda-developers.com/showthread.php?t=1466583
movies99 said:
Hello everyone..
I have purchased nook 16 gb 5 months back but barely used it.. I read few books, browse and few movies.. and it plays only .mp4.. so disgusting.. tried to root then,it but didn't find much time.
now when I check its updated to 1.4.3.
please suggest me/links on how to root.. what to root.. I don't even understand what is cwm.. cm9.. I'm an absolute newbie to android and rooting..
Awaiting reply.. Thanks
Click to expand...
Click to collapse
for starters look in the development section and follow each and every instruction to the T.
1.4.3 is annoying to work with from what I hear. You should've just rooted it and installed a custom rom. You wouldn't be dealing with this in the first place...
ShinnAsuka said:
for starters look in the development section and follow each and every instruction to the T.
1.4.3 is annoying to work with from what I hear. You should've just rooted it and installed a custom rom. You wouldn't be dealing with this in the first place...
Click to expand...
Click to collapse
1.4.3 is pretty easy to root. I had no problems with it at all.
Of course the only thing I did with it was root, install CWM Recovery, and put CM9 on it.
liquidzoo said:
1.4.3 is pretty easy to root. I had no problems with it at all.
Of course the only thing I did with it was root, install CWM Recovery, and put CM9 on it.
Click to expand...
Click to collapse
Thanks a lot !! and thanks everyone for the support.. I am unable to post in that thread.. may be coz I'm a newbie..
one question.. the sd card has now only 26 mb free.. and total size is 69 mb
can someone please tell me if I did anything wrong or what should I do now??
I have formated my sd card by it still shows 69 mb please help..
movies99 said:
I have formated my sd card by it still shows 69 mb please help..
Click to expand...
Click to collapse
I have used partition manager and formatted it back !!
and but how to install .apk files if the size of sd card is 24mb free..
I see a lot of things and am very confused.. what does rom port mean ?? directly porting into rom instead of sd ?? [ROM][Port] NX Fire [CM9 Based] and how to do that.. there are no instructions like it is for sd card thread and what does this mean [ROM/MODS/THEME] Nook Tablet ONE-STOP-SHOP for CM7 | UPDATE! Aug/10
I'm sorry for asking so many noob questions.. thanks for your patience
guys I'm unable to update nt hidden settings.. finally found out how to update by holding on the icon.. it goes to the market.. and I click update.. but then.. it keeps showing downloading but no progress..
help me with this..
Thanks..
movies99 said:
please suggest me/links on how to root.. what to root.. I don't even understand what is cwm.. cm9.. I'm an absolute newbie to android and rooting..
Awaiting reply.. Thanks
Click to expand...
Click to collapse
Please read this before doing anything: http://forum.xda-developers.com/showthread.php?t=1666065
My advice is to create a cwm sd boot card and use that to install CM7. I can help you further after I get off of work.
Sent from my SGH-T679 using xda app-developers app
---------- Post added at 08:43 PM ---------- Previous post was at 08:32 PM ----------
http://forum.xda-developers.com/showthread.php?t=1640958 go here and follow instructions for creating cwm sd card. By having this sd card in you're nook when you power it on, you are able to make a backup of you're current setup, erase the device, and install cm 7 (Android 2.3).
Sent from my SGH-T679 using xda app-developers app
rogerski1 said:
My advice is to create a cwm sd boot card and use that to install CM7. I can help you further after I get off of work.
Sent from my SGH-T679 using xda app-developers app
---------- Post added at 08:43 PM ---------- Previous post was at 08:32 PM ----------
http://forum.xda-developers.com/showthread.php?t=1640958 go here and follow instructions for creating cwm sd card. By having this sd card in you're nook when you power it on, you are able to make a backup of you're current setup, erase the device, and install cm 7 (Android 2.3).
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the support.. will do that..

[Q] Help to Root Smart Tab 8

Can anyone help me to root my karbonn smart tab 8?
You can root Smart Tab 8 and Smart tab 10 by following the method of rooting used by Ainol Novo 7 Crystal as it uses the same Chipset and is running JB 4.1.1 and almost all the specs are the same too.
Download the Crystal_Root.zip from attachments and copy it to a microSD card (do NOT extract it)
Charge up the battery in your Crystal, Power Off and remove the charger cable.
Insert the microSD card into your Crystal
Get into Recovery mode.
In the recovery you can move with the Volume- button, you can select with Power or Volume+
Select the apply update from EXT option
Select the Crystal_Root.zip, this will install the package
Wait for the update to finish
Select reboot system now
Follow the instructions properly and it should work.
THANKS
THANK YOU SO MUCH BUDDY IT WORKED
THANKU SO MUCH :good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
Glad that I could help.
---------- Post added at 11:24 PM ---------- Previous post was at 11:07 PM ----------
Please change the title of the thread and also the first post to help people root their ST8 and ST10. Link to my post in your first post.
Hey Guys Have Made A Video About Successful Rooting!!
hhttp://www.youtube.com/watch?v=OfGjvjb0izc
Credits Fly Out to Ankit for the same. IT WORKS!
Enter Recovery By Shutting Off & then Keeping the Volume DOWN Button Pressed Along with Power Till the Tablet Boots up. Then Let Go of the Power Button, But Keep the Volume DOWN Button Pressed.
Here's a video to see how to Enter Recovery For Karbonn Smart Tab 8 Velox:
http://www.youtube.com/watch?v=jhC_V35yC7Y
Strange that this tablet is using JB Phone UI. We can change it to Tablet UI which looks much better. Can someone tell me what's the value of lcd density in the build.prop.???
Title
ankitdaruler said:
Glad that I could help.
---------- Post added at 11:24 PM ---------- Previous post was at 11:07 PM ----------
Please change the title of the thread and also the first post to help people root their ST8 and ST10. Link to my post in your first post.
Click to expand...
Click to collapse
How to change title
Sandee999 said:
How to change title
Click to expand...
Click to collapse
Edit your first post. You'll get the title there. Anyways can you post videos of HD games which are running on this tab??
I've bought ST 10 instead of ST 8 and this method of rooting is working pretty well on that too. :good:
Thanks a lot, it worked on Karbonn Cosmic ST10 like a charm. Now the next step would be to port CWM Recovery to the tablet.
Head over the following link for ST8 & ST10 developments(swapping,rooting). http://forum.xda-developers.com/showthread.php?p=36867952#post36867952
Hi ankitdaruler,
I too owned this Karbonn Smart Tab 8 and finally i rooted it following your method.
I have also successfully swapped the internal and external Cards in the device again using your vold.fstab file
I registered here just to thank u mate and even disclose that your found exploit really work's on ST8.
I can't post here = http://forum.xda-developers.com/showthread.php?t=2105692 as i am not allowed too. Begin a new member.
But i would soon post my finding there.
Thanks a lot mate. :good:
Karbonn st8 rooting
Thanks , I have rooted my Karbonn ST8 with the above instructions
Rooting was successfully completed. Thankyou again
Saurabh_Joshi said:
Hi ankitdaruler,
I too owned this Karbonn Smart Tab 8 and finally i rooted it following your method.
I have also successfully swapped the internal and external Cards in the device again using your vold.fstab file
I registered here just to thank u mate and even disclose that your found exploit really work's on ST8.
I can't post here = http://forum.xda-developers.com/showthread.php?t=2105692 as i am not allowed too. Begin a new member.
But i would soon post my finding there.
Thanks a lot mate. :good:
Click to expand...
Click to collapse
Most Welcome mate. Anyways you can share your findings here too. You'll get the credits for your work. Don't worry about that. :good:
I have made the CWM Recovery using Recovery Builder, made the update zip and signed it too. So can anyone just please test it by flashing it through stock recovery. My tab is not with me right now. So please let me know whether it's working or not so that I can release it officially. Download the zip from the attachment.
Hi guys is there any way to change the phone UI in the karbonn smart tab 8 velox to tablet UI, cause im really getting tired of using the phone UI in my 8' tablet.
cooldude9119 said:
Hi guys is there any way to change the phone UI in the karbonn smart tab 8 velox to tablet UI, cause im really getting tired of using the phone UI in my 8' tablet.
Click to expand...
Click to collapse
Even i am looking for the same At least i want to experience it once. So that i can decide which one suit me better. Anyone knows how to do it? BTW my device is rooted.
---------- Post added at 10:33 PM ---------- Previous post was at 10:24 PM ----------
ankitdaruler said:
I have made the CWM Recovery using Recovery Builder, made the update zip and signed it too. So can anyone just please test it by flashing it through stock recovery. My tab is not with me right now. So please let me know whether it's working or not so that I can release it officially. Download the zip from the attachment.
Click to expand...
Click to collapse
I love to help. But i would love to have the original stock recovery image as well, so that in worst case i have some backup method. But still i want to know how to go about it? Any way to backup stock recovery and then load it again if things go wrong ?
Need Karbonn Smart Tab 8 build.prop
Hi Guys,
Can anybody provide me build.prop from Karbonn Smart Tab 8?
Thanks in advance.
Regards,
Siddharth
siddharthk said:
Hi Guys,
Can anybody provide me build.prop from Karbonn Smart Tab 8?
Thanks in advance.
Regards,
Siddharth
Click to expand...
Click to collapse
I have already PM'ed you. Or is this post before you asked me via PM?
To go to Tablet Mode install Apex launcher and choose tablet mode. Its great
My Question: How to unroot and revert to stock? Before anybody roots this escape plan should always be there.
Sent from my ST8 using xda app-developers app

[Q] No.1P7 Mini pad Bricked

Hello guys,
today has happened to me the baddest thing in the world.
I've maked a custom CWM for my NO.1P7 mini pad and flashed it with SP Flash tool download mode (boot.img and recovery.img).
It showed me the CWM recovery 1 time but when i click "System Reboot Now" it becomed black screen and now i can't do anything.
I've tried every combination of buttons... I think that it's in hardbrick.
WHen i connect it (powered off, it's apparently dead) windows say that cannot be reconized and it show as "unknown device".....
Any suggestion?!?!
Thank you in advance....
reinstal all use this guide
www deoudewand nl/?p=318
download Stock_android
when you finish root yourfone and use mtk droid tool made you personal bckup
now you have a complete bckup upload and share i need the stock rom for modding
tanks for your help
the.master.asd said:
reinstal all use this guide
www deoudewand nl/?p=318
download Stock_android
when you finish root yourfone and use mtk droid tool made you personal bckup
now you have a complete bckup upload and share i need the stock rom for modding
tanks for your help
Click to expand...
Click to collapse
Hi, the site you shared "oudewand.nl" is a test site of mine, it wasn't ment to be online the real address is: http://blog.morrison.nl/
There are stock Android images available through my site. If you have any questions maybe I can help, I have two of these and have done the badest things to it!
---------- Post added at 05:02 PM ---------- Previous post was at 05:00 PM ----------
newlife229 said:
Hello guys,
today has happened to me the baddest thing in the world.
I've maked a custom CWM for my NO.1P7 mini pad and flashed it with SP Flash tool download mode (boot.img and recovery.img).
It showed me the CWM recovery 1 time but when i click "System Reboot Now" it becomed black screen and now i can't do anything.
I've tried every combination of buttons... I think that it's in hardbrick.
WHen i connect it (powered off, it's apparently dead) windows say that cannot be reconized and it show as "unknown device".....
Any suggestion?!?!
Thank you in advance....
Click to expand...
Click to collapse
Hi, if you push the power button AND the home button for about 5 seconds does that do anything? One time one of my devices did not respond to anything anymore and I had to open it and disconnect the battery for a short time, after that it was working like before again!
Let me know if I can help..
Great blog... I leave a message on your blog yesterday
I need the system.iMG because i have similar phablet
Hd-89 mini 3g
I suppose is the clone of the clone of the clone. Asd
My pablet have phone systemui without the navbar ... For instal it i have decompile e recompile systeui apk and framework but dont work
I need the systemui.apk and framework apk or system.img ..in stock android u have a tablet navbar!
Clan u help me
rvbcrs said:
Hi, the site you shared "oudewand.nl" is a test site of mine, it wasn't ment to be online the real address is: http://blog.morrison.nl/
There are stock Android images available through my site. If you have any questions maybe I can help, I have two of these and have done the badest things to it!
---------- Post added at 05:02 PM ---------- Previous post was at 05:00 PM ----------
Hi, if you push the power button AND the home button for about 5 seconds does that do anything? One time one of my devices did not respond to anything anymore and I had to open it and disconnect the battery for a short time, after that it was working like before again!
Let me know if I can help..
Click to expand...
Click to collapse
Yes, it's happen to me also. I've had to disconnect battery (unmounting tablet) to make it work.
the.master.asd said:
Great blog... I leave a message on your blog yesterday
I need the system.iMG because i have similar phablet
Hd-89 mini 3g
I suppose is the clone of the clone of the clone. Asd
My pablet have phone systemui without the navbar ... For instal it i have decompile e recompile systeui apk and framework but dont work
I need the systemui.apk and framework apk or system.img ..in stock android u have a tablet navbar!
Clan u help me
Click to expand...
Click to collapse
If you need system.img, I can made it 'couse my wife has this tablet (HD89) but not yet.
In this days I'm really busy.
PS: I'm from Italy...
alessandrogambi said:
If you need system.img, I can made it 'couse my wife has this tablet (HD89) but not yet.
In this days I'm really busy.
PS: I'm from Italy...
Click to expand...
Click to collapse
i'm from rome
i have resolve ... download img from blog
best regard for your help
fatto tutto...asd
Hello.
I would like to buy this No.1 P7 mini, but i have some guestions:
- is there realy a Quad core 1,2 GHz and 2GB version and where i can buy it?
- this clone of "mini" have only iOS theme, or you can use stock Google Android rom?
- can i put custom rom fom example Cyanogenmod 4.2.2?
- what is the quality of wifi, 3G data and voice on this device?
- how many hours you can play with this device on battery?
Thank you

[Q] Root Request for Alcatel One Touch Flash 4.4.2

Hello,
I need some help unlocking my new One Touch Flash 6042D
I've searched the internet, but couldn't find any good tutorial that helped me to gain SU to this phone.
So far I've tried the following apps:
Romaster
zhiqpk
360root
framaroot
rootdashi
Rootgenius
SRSRoot
I also tried to follow this tutorial:
http://forum.xda-developers.com/showpost.php?p=39390807
(stuck on #7, cus this phone has no battery and it is not working with the flash tool)
Does anyone resolved it yet?
Try this app
Hi, I have the TCL p728m, and I think it's the same as your.
Try this site: dashi.com
There is a QR code on the right side. This app should help.
Tell me did it work It did work for my phone.
i think, that VRoot will work
Hi,
found application using which I was able to root my phone.
The app is called zds_setup_5.2.16.3_azrjy (at least the filename says so).
Sorry can't post a link to it... As don't have the 10 posts required to post links. If anyone needs the link - PM me.
Here we Go!!!
serbent said:
Hi,
found application using which I was able to root my phone.
The app is called zds_setup_5.2.16.3_azrjy (at least the filename says so).
Sorry can't post a link to it... As don't have the 10 posts required to post links. If anyone needs the link - PM me.
Click to expand...
Click to collapse
People I got the breakthrough using vRoot/iRoot v1.7.9.2
Download Link : http://forum.xda-developers.com/showthread.php?t=2767648&page=5
Click on "Version 1.7.8 DOWNLOAD FROM HERE " . Setup will auto update to English version.
Cheers !!!:laugh:
Selfmade said:
Hello,
I need some help unlocking my new One Touch Flash 6042D
I've searched the internet, but couldn't find any good tutorial that helped me to gain SU to this phone.
So far I've tried the following apps:
Romaster
zhiqpk
360root
framaroot
rootdashi
Rootgenius
SRSRoot
I also tried to follow this tutorial:
http://forum.xda-developers.com/showpost.php?p=39390807
(stuck on #7, cus this phone has no battery and it is not working with the flash tool)
Does anyone resolved it yet?
Click to expand...
Click to collapse
Please, could you check if your phone support spanish language? I need the ROM of Alcatel 6042D with spanish language. Thank you.
---------- Post added at 08:32 PM ---------- Previous post was at 08:15 PM ----------
For root try KINGO. It works with all Alcatel phones.
See http://www.kingoapp.com/
Can you post the rom of the alcatel 6042d here?
About rooting n cwm mod in 6042D
Hello guyz ...
Im jay sakhiya(AJ) i have that phone till last 2 months....
I successfully rooted n flashed cwm mod recovery on these phone...
I didn t hve enough knowledge about porting rom...but i have li'l knowledge about rooting,flashing rom,cynogenmod.
I hve rooted my 6042D through vroot desktop app...
Our phone has kitkat version so its confirm we can only root it wid pc
Vroot can root ma mobile wid chinese root app....but it can change into supersu through these turtorial.....u can also find vroot download link there...
After rooting ur phone u can also flash cwm mod on it like mine....
I learn these method of generating cwm mod from IIN ( idea internet network)
I can share it wid u....
Sorry....
I shared link but xda blocked me to share link....
Bcoz im new use user
But u can try google search
"androidhow" _website will learn you hw to create cwm mod
Now my phone hve cwm mod and its rooted wid super su.....yeah
U can change its font using ifont app and u can also give its support of other langauge.......
By d way i have created alcatel one touch flash (3 member) facebook group
Every one who hve 6042D should join it.....
We will post n create best roms in that group.....agar sikhne ki chaah ho to insaan kuch bhi kar skta hai:angel:
By guyz .....
If u want more information then pm me.....
jay8141 said:
Hello guyz ...
Im jay sakhiya(AJ) i have that phone till last 2 months....
I successfully rooted n flashed cwm mod recovery on these phone...
I didn t hve enough knowledge about porting rom...but i have li'l knowledge about rooting,flashing rom,cynogenmod.
I hve rooted my 6042D through vroot desktop app...
Our phone has kitkat version so its confirm we can only root it wid pc
.
I can share it wid u....
Click to expand...
Click to collapse
That's some great news.
Please, upload an original firmware anywhere and PM me the link. I'll share it to the comunity with all the credits to you.
You know, for the last two months there was so many fakes about working firmware for this phone... I hope that you've got this one for real.
Did search facebook. The only group i found was "alcatelonetouchflash6042". There are people asking for the firmware, and no links to it.
want system recovery of 6042D
After i flashed cwm recovery on my phone.....
Its good but now i found firware upgrade found phone for our phone.....
So i cant upgrade it bcoz i hve cwm mod recovery....
Although i forgot to take backup of stock recovery i also dont knw how to take back up of recovery....
Can any one tell me howz these upgrade???
Can it fixed camera issue in night??
Can it fix random reboot problem??
..
.
.
I jst want stock recovery img n cwm recovery (i hve it but dnt knw hw to take backup).....
Im thankful for him.....if help me....
---------- Post added at 04:54 AM ---------- Previous post was at 04:40 AM ----------
When u want to flash recovery from flash tool.....
U jst need to turn off ur phone then u can flash recovery or etc.
So,non removable battery is not question
Or when phone got bootloop u can turn off phone by press and hold power button untill phone restart n when bootlogo appear 2nd time then screen off release button
Yeah ur phone will switch off although u got boot loop....
Then u can go to recovery by pressing volume down n power button......
jay8141 said:
After i flashed cwm recovery on my phone.....
Its good but now i found firware upgrade found phone for our phone.....
So i cant upgrade it bcoz i hve cwm mod recovery....
Although i forgot to take backup of stock recovery i also dont knw how to take back up of recovery....
Can any one tell me howz these upgrade???
Can it fixed camera issue in night??
Can it fix random reboot problem??
Click to expand...
Click to collapse
To answer your questions I need to download this firmware and flash it.
Post the link here or PM me.
6042D
U will found it in system upgrade
jay8141 said:
U will found it in system upgrade
Click to expand...
Click to collapse
fine, now you are on your own.
hi bro i need cwr/twrp for alcatel one touch flash 6042
jay8141 said:
Hello guyz ...
Im jay sakhiya(AJ) i have that phone till last 2 months....
I successfully rooted n flashed cwm mod recovery on these phone...
I didn t hve enough knowledge about porting rom...but i have li'l knowledge about rooting,flashing rom,cynogenmod.
I hve rooted my 6042D through vroot desktop app...
Our phone has kitkat version so its confirm we can only root it wid pc
Vroot can root ma mobile wid chinese root app....but it can change into supersu through these turtorial.....u can also find vroot download link there...
After rooting ur phone u can also flash cwm mod on it like mine....
I learn these method of generating cwm mod from IIN ( idea internet network)
I can share it wid u....
Sorry....
I shared link but xda blocked me to share link....
Bcoz im new use user
But u can try google search
"androidhow" _website will learn you hw to create cwm mod
Now my phone hve cwm mod and its rooted wid super su.....yeah
U can change its font using ifont app and u can also give its support of other langauge.......
By d way i have created alcatel one touch flash (3 member) facebook group
Every one who hve 6042D should join it.....
We will post n create best roms in that group.....agar sikhne ki chaah ho to insaan kuch bhi kar skta hai:angel:
By guyz .....
If u want more information then pm me.....
Click to expand...
Click to collapse
i need ur help to install Cwr/TWRP on my Alcatel one touch flash 6042d please share me the link where i can get?please i tried alot but no where i get.
Hello.
Does anyone has the stock rom of this phone, orriginal or a backup? If yes, please upload it somewhere and paste here the link. A fully working custom rom will be also apreciated. Somebody said it does exist a facebook group of this phone. could you paste the link? Many thanks.
Rebox said:
Hello.
Does anyone has the stock rom of this phone, orriginal or a backup? If yes, please upload it somewhere and paste here the link. A fully working custom rom will be also apreciated. Somebody said it does exist a facebook group of this phone. could you paste the link? Many thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=59151986&postcount=22
Thx. I already saw that post but I didn't understand how to flash it. Mine is already rooted and it has CWM. Firstly I have to mention that I have a TCL S720 not an Alcatel, but it is the same phone as I know (not sure 100% but 95% sure) and I tried to flash the zip from CWM and it said Flash failed. Have I done anything wrong? Should I do it otherwise? Thanks.
i think, that we have to wait for flashtool backup
Download the root genius.
Download the Rootgenius,search from google and install in your pc and connect your phone,be sure that usb debugging is on when you are connecting your phone to pc.One thing is that you have working internet connection on your pc because this root software download some usb driver file of few mb.You root your mobile in less than three minutes
Selfmade said:
Hello,
I need some help unlocking my new One Touch Flash 6042D
I've searched the internet, but couldn't find any good tutorial that helped me to gain SU to this phone.
So far I've tried the following apps:
Romaster
zhiqpk
360root
framaroot
rootdashi
Rootgenius
SRSRoot
I also tried to follow this tutorial:
http://forum.xda-developers.com/showpost.php?p=39390807
(stuck on #7, cus this phone has no battery and it is not working with the flash tool)
Does anyone resolved it yet?
Click to expand...
Click to collapse
Selfmade said:
Hello,
I need some help unlocking my new One Touch Flash 6042D
I've searched the internet, but couldn't find any good tutorial that helped me to gain SU to this phone.
So far I've tried the following apps:
Romaster
zhiqpk
360root
framaroot
rootdashi
Rootgenius
SRSRoot
I also tried to follow this tutorial:
http://forum.xda-developers.com/showpost.php?p=39390807
(stuck on #7, cus this phone has no battery and it is not working with the flash tool)
Does anyone resolved it yet?
Click to expand...
Click to collapse
Same is the case with me. I could not root it with all the above apps :crying:
---------- Post added at 11:48 AM ---------- Previous post was at 11:45 AM ----------
AmrikSingh said:
Download the Rootgenius,search from google and install in your pc and connect your phone,be sure that usb debugging is on when you are connecting your phone to pc.One thing is that you have working internet connection on your pc because this root software download some usb driver file of few mb.You root your mobile in less than three minutes
Click to expand...
Click to collapse
It could not root the phone

how to root Wiko lenny 2 ?help!

Hi guys i'm using **Wiko Lenny 2** which is a one of the newest phone of wiko with android 5.1 & build number : ALPS.L1.MP6.V .and i'm trying to root this model i searched online for rooting method & also tried to root using application like King go root,King root,one click root etc but no luck... if anyone knows how to pls help.And thnx in advance
loded said:
Hi guys i'm using **Wiko Lenny 2** which is a one of the newest phone of wiko with android 5.1 & build number : ALPS.L1.MP6.V .and i'm trying to root this model i searched online for rooting method & also tried to root using application like King go root,King root,one click root etc but no luck... if anyone knows how to pls help.And thnx in advance
Click to expand...
Click to collapse
I've your same problem i want to ROOT, but i can't
Doesn't anybody knows how to root this bad boy
loded said:
Doesn't anybody knows how to root this bad boy
Click to expand...
Click to collapse
It's been figured out on another post:
http://forum.xda-developers.com/android/help/root-cwm-twrp-wiko-lenny-2-5-1-1-mt6580m-t3254715/page7
You should probably close this thread.
CVAngelo said:
It's been figured out on another post:
http://forum.xda-developers.com/android/help/root-cwm-twrp-wiko-lenny-2-5-1-1-mt6580m-t3254715/page7
You should probably close this thread.
Click to expand...
Click to collapse
Hi use kingroot
ROOTED
loded said:
Hi guys i'm using **Wiko Lenny 2** which is a one of the newest phone of wiko with android 5.1 & build number : ALPS.L1.MP6.V .and i'm trying to root this model i searched online for rooting method & also tried to root using application like King go root,King root,one click root etc but no luck... if anyone knows how to pls help.And thnx in advance
Click to expand...
Click to collapse
HI
test king root apk
connect your device by wifi or date internet and root it
i test it successfully
aboabbasx3 said:
HI
test king root apk
connect your device by wifi or date internet and root it
i test it successfully
Click to expand...
Click to collapse
Go to the link that's posted above. Simply flash the kernel and the custom recovery. Once you've got the custom recovery, just install a SuperSu zip from the SD card while you're in recovery mode. Done! SuperSu is the best root manager available!
No need to risk using Chinese rooting tool! You won't know what else is being put on your phone. And you won't have to tolerate any unwanted ads.
Sent from my Nexus 7 using XDA Free mobile app
need help...
hi how are u all.
i am using wiko lenny 2.
i need help
i deleted a system apk by mistake which is name vpndialogs .can someone give me a copy of this system apk who have rooted wiko lenny 2 device.
Hi,
Do you have any backup of your rom and can you specify the apps name or what is it for?
first thank u for your reply.no i have not backup of my rom.
---------- Post added at 12:44 PM ---------- Previous post was at 12:37 PM ----------
loded said:
Hi,
Do you have any backup of your rom and can you specify the apps name or what is it for?
Click to expand...
Click to collapse
this vpndialogs part of system apk which allow to runs vpn on phone.but i deleted to this system apk by mistakes and i need it again but i have not because i delete it.can u give a copy of this vpndialogs apk please?
A android user said:
first thank u for your reply.no i have not backup of my rom.
---------- Post added at 12:44 PM ---------- Previous post was at 12:37 PM ----------
this vpndialogs part of system apk which allow to runs vpn on phone.but i deleted to this system apk by mistakes and i need it again but i have not because i delete it.can u give a copy of this vpndialogs apk please?
Click to expand...
Click to collapse
sorry unfortunately I don't have the phone anymore but I think if you install wiko lenny 2 official rom it will resolve it. (i think you can find the rom on the official site of wiko... I'm not sure or you can search on Google and make sure you have correct rom)
you need to have installed TWRP as well
and installing new rom it will reset all your data.
plz go to the thread that mentioned on comment by CVangelo and let me know your progression

Categories

Resources