Related
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Has anyone experienced this or am I the only one?
M5devil said:
Has anyone experienced this or am I the only one?
Click to expand...
Click to collapse
Sorry I have never heard of this or witnessed it while flashing anything to my device. Obviously the battery screen signifies that the phone is off but is in charging mode and hitting the power button will boot the device up. (I'm sure you already know of this). Never heard of it being stuck at that screen after flashing. Hopefully you can get this solved soon. Good luck
M5devil said:
Hi guys,
I figured I'll post again here since I think I bricked my phone.... I was trying to install Eugene's Vibrant6.zip and I got stuck on the Vibrant Logo with Samsung at the bottom. I tried to reset with both volume buttons and power button and got to grey battery and nothing else...
What I did prior to this was I formatted system and data on the recovery screen as per some posts here and it would just boot into a loop. Windows won't recognize a device and it just shows grey battery image and it doesn't seem to be charging. Anyone can help me?
EDIT:
Out and in the battery, plugged in to USB and it just loads the battery image and it's all grey color as if fully discharged and just stuck on it. Device is also not found in my system so I can't do any adb commands. If I just reset it without the cable it would just sit on the Samsung boot loop. Anything I can do?
UPDATE: Ok, some good news! I heard the sound as it connected via USB, I can see the 2 drives, but they read as Removable Disk and I can't access them...
adb reboot recovery or download
error: device not found
What if simply format the drives via Windows right click menu? Will that do any good or bad? What are my options here? Any help will be appreciated!
UPDATE: Well... looks like this is pretty much a dead phone.... I right clicked and selected Format in My Computer and it just says There is no disk in Driver F: Insert a disk and try again.
Can I a mount an image somehow via MagicISO? Or is there something simpler that I just can't figure out?
Again, thanks for your help!
Thanks.
Click to expand...
Click to collapse
Slow down for a second. Your phone is definitely not bricked. Ive been over the edge, and been able to bring my phone back to life.
To clarify, you flashed vibrant6.zip through clockwork mod, and then the phone got stuck on the samsung S? How long did you let it sit there?
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
I flashed the stock ROM via Odin and then wanted to install Vibrant6.zip. For that I entered into a recovery mode via Clockwork and as someone in the other thread advised, I formatted system and also data, don't recall exactly. Then it looped to a standard recovery mode and I just rebooted the phone. This is where it got stuck... Vibrant in the center and Samsung at the bottom of the screen. To test it I left it like that from night till this morning. In the morning I woke up it was on the same boot screen.
Before that at night, after seeing it hand at the boot, I held both volume keys and power, waited for it to reboot, and immediately it showed a circular progress bar, but not moving just highlighted the 12 o'clock bar and second later I see the battery image all in gray and nothing else. It just sits on that grey static image without actually charging it (no green section or flashing dots)
Boot logo only appears if I am trying to reset without the USB cable. On the boot loop I plug in the cable and I hear the USB connecting it, I see the 2 Removable disks, but both inaccessible and adb commands don't recognize the device.
Very weird, as in turned off mode it's not charging at all.. just shows this grey battery image with a circle progress froze on 12 o'clock bar.
That's pretty much it.... I was never able to enter into recovery nor download via the buttons. It would just always reboot into this grey battery screen....
Completely helpless.... I did order a new battery from TMO, maybe the battery is fried and that's why it's not charging and just sits on this stupid static grey battery screen.
ArbitrageMan said:
It sounds like just your ROM is messed up.
Are you able to "get into recovery"? Holding both volume buttons while you power on the phone, without it being plugged into usb.
Do you have Odin? And have you ever used it?
Its totally frustrating when your phone gets messed up and you don't know what to do.
Click to expand...
Click to collapse
Holding both volume keys and releasing power once screen goes blank, only show Vibrant logo again... I have tried this a million times
With USB cable it shows grey battery screen, without the cable just a Vibrant boot loop...
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
zephiK said:
I'm assuming that you have the Samsung drivers installed.
Try the following steps:
Take out the battery and then put it back in but don't turn the phone on.
Plug it via USB.. does anything show up on the screen?
Click to expand...
Click to collapse
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
M5devil said:
Yes, I have the drivers installed as I was able to locate my device and use adb commands to enter into recovery and download. Also Kies worked.
Doing what you asked simply load the grey battery image and nothing else with a progress bar not spinning. Just sort of hangs on this image and that's all.
Booting without the USB cable loads the Vibrant boot loop. Connecting USB at this boot loop state, would play a sound as if it connected to my windows, but I can only see Removable disks that are inaccessible and adb doesn't find the device...
Very strange.... trying to use the button keys to enter into recovery or download is no use, as that just won't ever happen, even when phone was working fine.
Any other suggestions? I would return the phone for replacement... but I am not sure how it would look with all the files still on the internal disk including root if I am not mistaken... I had only few hours of sleep because of this headache
Click to expand...
Click to collapse
Are you sure that you're doing the right things to get to download? I've been in this situation and I wasn't able to get into recovery but I was able to get back into download mode.
I believe if you return it back and they find out it was rooted, they will charge you for it. If not, it'll appear on your bill.
I'm sure that you're doing the wrong things to get into download mode. If something is appearing on your screen it is a soft-brick and you're not bricked.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (powers on its own when plugged in)
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
Click to expand...
Click to collapse
A tip to get into download mode is to put the phone HORIZONTALLY (sideways) and it will make it a lot easier.
I am pretty much positive about it. I know a lot of people can easily enter into recovery or download modes, but I know many can't and I am one of them. It would just load the grey battery image instantly as I let go of the power button.
1. Take out battery, put it back in. (to turn the phone fully off) DONE
2. Don't turn it the phone on! DONE
3. Plug the phone into your PC, do not hit the power button! DONE
4. See if the phone shows anything on the screen (powers on its own when plugged in) FIRST THING THAT APPEARS IS A CIRCULAR PROGRESS BAR THAT CHANGES TO A GREY BATTERY IMAGE WITH A BAR IN THE MIDDLE OF IT. STATIC IMAGE, NOTHING ELSE.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons. DONE
6. Hold the power button as well as the volume buttons until the screen goes black. DONE
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons! DONE
THE STUPID GREY COLOR BATTERY IMAGE APPEARS AS BEFORE....
I'm thinking maybe battery is fried and that's why the grey color screen appears and not the usual screen where you see the battery charging...
After reading this thread it's clear that my handset is one of the new ones that have recovery/download modes disabled via the volume+power buttons.
So that pretty much covers it... I hope TMO will not ***** about the files that are on the internal sd that I am unable to access and remove... unless anyone else has any fresh ideals how to gain access to the disk
I think I might have a similar problem.
I accidentally deleted the touchwiz framework so I can't do anything ON the phone. It boots up, and gets me to the lock screen. As soon as I unlock, I am greeted with dozens of unending force closes.
I can get into both download and recovery mode, however, I have not been able to get ADB to recognize the device. I am attempting to push the stock ROM to the internal memory to flash over everything.
I'm not sure what to do to get ADB to work but it's driving me nuts!
Stuck at vibrant? I have a fix
Check out android Dev Section... I figured out how to access download mode or stock recovery mode when you are stuck at the vibrant screen!!!! BACK IN BUSINESS VIBRANT OWNERS!!!
i got the same problem and nothing seems to work
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
eduardo_reflex said:
i got the same problem and nothing seems to work
Click to expand...
Click to collapse
... do i even have to say it?
droyd666 said:
Try this out http://forum.xda-developers.com/showthread.php?t=1103706
Click to expand...
Click to collapse
this problem is most likely solved. After 2 years!
mylostlonelysoul said:
Feels like I'm having same issues..
the previous post requires opening the phone and I don't have tools for that..
Here's my issue.
I can't get into Recovery or Download and computer won't see phone to Odin.
I've got drivers installed and AIO Toolbox as well as ADB(which won't work because of computer not seeing phone.
Using the manual option(vol+ vol- power), nothing works.
I've done all the tricks like unplug it then hold vol keys plug it insert battery..
When I do plug in the phone to to even just get a charge in it goes the the battery, but my is is frozen or something. doesn't turn green or have a charging animation. After about a minute or so it was start up and boot loop. I read something about a bad battery? I've got two of them and they seemed fine before..
Before all this I had to Odin and go to stock. I was attempting to get ics back but I was being lazy and trying to do as little as possible..bad idea. I was following slim ics install and flashed cm9 daily, slimics and commons..and now this..
I'm not sure what to do..I usually search around xda or google..10 hours later.. idk..Anyone able to give help please?
:crying:
Click to expand...
Click to collapse
Try asking another question. But I suggest using a USB jig. They usually work. Then odin
Sent from Mount Olympus via Hermes
Did you ever get it fixed man? I literally did the very same to mine a while back and It works like butter as we speak. It is fixable with a mini-usb jig or dongle. You can make your own with about $3 worth of parts from radio shack but I recommend buying one, it will be easier. I for the record made mine simply twisting together the resistors and though it was tough to touch the right pins it did eventually work and get me back into download mode.
Hopefully you already got it fixed though. If not I can help you out.
YUP. I "soft bricked" my t-mobile galaxy s (vibrant here in the us) or so I hope. The phone was rooted via z4 on the latest android t959uvji6 from t-mobile.
How did i do it? Brick my phone that is...
The 3d gallery was pissing me off by picking up everything on the phone. I tried clearing the default setting via the manage app but nothing changed so I decided to delete it. First backing up the apk and odex file from the system folder with titanium backup then deleted them from the system folder via root explorer. Rebooted the phone, pulled out the battery, waited for 30 seconds or so, popped in the battery and booted up the phone w/o any issues.
I tried installing the backup 3d gallery apk file and got the "app not installed" error on numerous attempts. Then tried simply copying it over again with ti backup and nothing happens. Gave up and said the heck with and went the factory restore route, got all the relevant apps installed and tried reinstalling the 3d gallery apk but resulting in the same "app not installed" error prompt. So I again copied over the apk and odex file into the system folder. Rebooted and nothing... phone does not boot into the home screen.
At this point here is what the phone is able to do.
It will boot up and display the default galaxy s animation, goes through it's array of colors then comes to a stop at all white letters then the screen goes blank and nothing happens - zip. nadda. i left it on for 12hrs like that - blank screen w/all the hard keys lit up.
What i did notice was win7x64 recognizes the phone after it gets into the blank screen of death as mass storage units.
So far i've tried booting into the recovery screen via the three button method and none of them works.
Did the karma-volume up-home-power twist - nothing
Did the karma-volume down-home-power roll - nothing
Did the karma-volume up and down-power jiggy - nothing
I tried the key combos for about 2hrs without any success then jumped into adb. After reading for a bit I realized that the phone was still rooted and the debug mode was enabled the last time i shutdown the phone (good'ol ti-backup)
For a while there adb did not recognize the phone at all but with an odd power cycling while spamming "adb reboot recovery" it was able to finally nab hold of the phone and jump into the recovery console. At first I thought it was pure luck so unplugged everything and tried it again - works every time if i did the odd out of sequence power cycle while spamming the adb console with "adb reboot recovery".
In the reboot recovery - deleted the user data and did the restore.
Here's where I think I really screwed up - now the phone is no longer in debug mode.
Long story short - is there a way to get into the recovery screen w/o debug mode on?
**quickly pulls on flack jacket**
but seriously any suggestions would be great
Wrong section bro. You probably won't get an answer here.
To answer your question. Yes, Remove Battery, Plug your phone to USB, Press and hold the volume down and the power button Put the batter back on. This should get you into download mode. Use ODIN to restore.
the usb jig trick did the work - now i have two phones!!!! (bought the nexus s yesterday) lol
Time to ODIN.
To access Download mode.
Unplug. press volume up and down togheter, and connect USB. VOILA!
If ODIN does not recognize it, plug and unplug again
chichu_9 said:
To answer your question. Yes, Remove Battery, Plug your phone to USB, Press and hold the volume down and the power button Put the batter back on. This should get you into download mode. Use ODIN to restore.
Click to expand...
Click to collapse
no!
Why the hell are people giving others ideas on how to get into download when their doing it wrong.
its JUST THE VOLUME BUTTONS, NOT THE POWER BUTTON ALONG WITH IT.
volume + power = Recovery, which in this case you probably cant get into
Volume - Power = Download mode, which everyone can get into unless if they somehow hard bricked, if its possible.
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
wafflebroski said:
My samsung vibrant running 4.0.4 ICS zenwich 1.8.4 randomly shut off today, not even able to turn on, it was the Sleep of Death I have got before, so i pulled battery and reboot, still nothing.
The phone now boots, but their is no display
The phone will literally turn on, have the 4 buttons light up on the bottom, have the screen be responsive to touches, but the physical display is off
I can unlock my phone by swiping, hear the volume up sound, even dial calls by blind touching. It is the same idea as a PC that is plugged in, just so VGA cable to the monitor.
I have tried rebooting to recovery, download mode and tried to heimdall, but it never finds my device, i tried to sdk in and reboot to download mode via cmd prompt but no luck finding device too
I am all out of ideas and nothing is seems to be working
Any advice on resolving this issue would be appreciated
Click to expand...
Click to collapse
Device Manager show anything is plugged in?
FaultException said:
Device Manager show anything is plugged in?
Click to expand...
Click to collapse
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
wafflebroski said:
Yes, It shows up as the linusb winusb t-959 but neither heimdall or android sdk find the device.
Click to expand...
Click to collapse
So were you able to get into Download Mode at all? And if so was the display on then?
FaultException said:
So were you able to get into Download Mode at all? And if so was the display on then?
Click to expand...
Click to collapse
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
wafflebroski said:
i think it did because it wasnt at a lock screen, and when i touched the soft buttons they would light up, but the phone wasnt in an OS.
the screen was still off though, I can't get anything to make it turn on
Click to expand...
Click to collapse
What method did you use to get into Download Mode?
FaultException said:
What method did you use to get into Download Mode?
Click to expand...
Click to collapse
take battery out, hold vol + and - and power button, put battery in while usb connected
wafflebroski said:
take battery out, hold vol + and - and power button, put battery in while usb connected
Click to expand...
Click to collapse
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
FaultException said:
You may've gotten into recovery, I can't really get into download mode like that. Try this:
Unplug USB & remove battery
Insert battery but do not power on.
Hold VOL-UP + VOL-DOWN
Insert USB and wait a few seconds, while still holding them
Click to expand...
Click to collapse
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
wafflebroski said:
Ok that works, I'm defineatly in download mode, the device shows up in ODIN, but not heimdall. I am not familiar with ODIN, how would I go about flashing the ICS zen rom? I found a tutorial to flash back to stock ROM and wipe all data, but I would like to be able to just reflash the ICS rom
Click to expand...
Click to collapse
Ok, so it shows the download mode on the screen of the phone?
If so, that's good news and means your screen is not shot.
Try to get Heimdall to work. Are you in windows? Then you'll need to uninstall the samsung drivers and do this (from CM update guide):
CM update guide said:
1. Run the included zadig.exe in the drivers folder of the Heimdall Suite.
2. From the menu, choose Options ยป List All Devices.
3. From the drop down, select Samsung USB Composite Device or Gadget Serial.
4. Click Install Driver.
NOTE: A prompt may appear warning that the installer is unable to verify the publisher of the driver. Ignore it and select "Install this driver anyway."
5. Heimdall can now be used safely on the Windows computer.
Click to expand...
Click to collapse
Once heimdall is running, try grabbing the boot.img out of the zen zip and do this:
Code:
heimdall flash --kernel boot.img
See if anything comes of that.
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
wafflebroski said:
The screen never turned on.. it just went into download mode and i was able to see from ODIN that it was recognized. So i ODIN'd back to stock rom, i heard the phone reboot, but still no display.
Like before the phone's screen is 100% responsive, i can unlock the phone, hear the usb plugging in noise, just no display. It just blows my mind because the screen works but its not on.. I am very confused
Click to expand...
Click to collapse
That's not good. Your phone might be done for then. I once repartitioned with no partition files and still download mode worked on a fresh battery pull.
Maybe try leaving the battery out for a while and see if it fixes itself, since it seems to be an electronics problem, maybe something needs time to reset or something.
Sent from my SGH-T959 using xda premium
Yea I've had the battery out for over 30 mins and nothing. I even opened up my phone last night to check all the ribbon wires and connections, everything looked fine and i removed the motherboard & replugged everything in.. still no luck
it's a good thing my contract is up I think I am going to get the samsung galaxy s 3..
RIP vibrant best phone i ever had, I'm surprised it lasted this long with all the mods I had done to it haha
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. i think im stuck in recovery screen, but no way to be sure , hence i cant get usb debug.Please help.
I have a rooted i777 with SHOstock rom, I haven't updated the rom for a few months so I'm not sure which version it is.
The phone was working yesterday and it suddenly got stuck so I tried to reboot it (had to take out the battery because the power button didn't respond) but now each time I try to turn it on it is stuck on a black screen with the logo "Samsung Galaxy SII" and won't progress.
I tried to boot to recovery but it shows a screen saying "CWM-based Recovery v6.0.2.7" but it doesn't go pass the screen to show the recovery menu (it just reboots after being stuck on this screen for about a minute).
I tried to boot to download mode and succeeded, but every time I connect the device to my pc, the pc doesn't recognize it
(I tried re-installing kies, but it didn't help and probably the problem is not with the pc drivers because if I connect my wife's unrooted i777 to the pc it does recognize it).
so now I don't have clue what else to try.
any advice will be appreciated.
Make sure you have Odin v1.85 on your Windows PC. Look in the Windows Add/Remove programs dialog (or Uninstall a Program dialog) to see if you have SAMSUNG USB driver for mobile phones.
Open Odin on the desktop. Next put the phone into download mode by holding down vol + and vol - while plugging in the USB cable.
If Odin recognizes your phone, flash back to stock. I would recommend UCMD8 stock firmware, which you can get from the Download Repository.
don't know what happened to it but now it doesn't even turn on.
it's stopped turning on before I had a chance to try what you suggested.
now even if I connect it to the charger it doesn't show the charging status.
is there any other "force something" I can try?
kokoman said:
is there any other "force something" I can try?
Click to expand...
Click to collapse
Remove the battery and leave it out. Connect the USB cable to your PC. While holding down the vol- button (also try it with both vol- and vol+) but not the power button, plug the USB cable into the phone. The computer will provide the power. If this works, your phone will go into download mode. If not... you have very likely had some kind of hardware failure.
unfortunately it didn't work.
can't get it to download mode.
I'll try to leave the battery out for a longer time and try again.
should I try ordering a JTAG usb and see if it puts it in download mode or
probably my only option is to send it to mobiletechvideos?
I had the same problem, Your battery got too low. Pull your battery and leave it out for a while 15 mins or so. Put the battery back in and connect charger. Let the battery charge for a while without trying to turn on phone. The phone will not turn on with a dead battery even if it is connected to charger.
I just solved a problem that I didn't find any help with, so I thought I would post it here in case somebody else needs help out of this situation, and this is a recent and related thread.
After I pulled the battery of my i777 to test in another phone, without remembering to power my phone off first, it would only hang at the Samsung boot logo (stock UCMD8 ROM, rooted, stock recovery). Normally the Samsung boot screen shows for only about five seconds. Pulling the battery wouldn't get it to boot right. Holding Power to force a reboot didn't solve it. After clearing the cache it would move to the AT&T Rethink Possible screen once, then reboot and then again get hung on the Samsung logo screen. Also my battery was heating up a lot as it was hung.
I could get into both download mode and recovery. I tried reflashing my ROM from the stock file in ODIN since that would save all of my data IF it worked. This still didn't get it to boot past the first logo. Finally doing a factory reset on stock recovery is what solved my problem. I had to re-add my account and reload apps from scratch, etc.
I am pretty new to this rooted community and i unfortunately felt a too confident with everyone saying it is really easy. I did a one click root on my lg g3 vs985 (35B version) and was successful. The next step was to install twrp and i attempted so with flashify and the latest twrp IMG. The recovery boot never worked and always did a normal boot. I resorted to this one tutorial which said to use an app called autorec. This where it went wrong. The reboot made my screen blank and none of the buttons did anything. I plugged it in and my laptop still recognized the phone. I pulled the battery and plugged in and the screen turned on (thankfully) and shows a missing battery screen. With the battery in i tried turning it on with the power and volume down button on and it vibrated. Now randomly vibrates. Please help i don't know what to do!
This forum is extremely unhelpful, but i managed to get it back to stock. I was missing some drivers and not being careful, i almost ended up with a brick.
What did you do to fix the issue? My phone is doing nearly the same thing though it was after installing JasmineROM that it occurred. The screen is blank unless I pull the battery and plug it in to see the missing battery icon.
malhovic said:
What did you do to fix the issue? My phone is doing nearly the same thing though it was after installing JasmineROM that it occurred. The screen is blank unless I pull the battery and plug it in to see the missing battery icon.
Click to expand...
Click to collapse
1. Pull the battery and put it back in
2. Press and hold the volume up button and plug it in to a PC
3. Keep holding down the volume up until you see a screen which says download mode
4. Install a program called LG Flash Tool 2014 (Extract and put it into a directory you want)
5. Download the KDZ of the stock software you want (forum around here but I don't remember where)
6. Put the KDZ file into the LG Flash Tool folder
7. Enter CDMA and the KDZ file
8. Click normal flash which will bring you to a screen.
9. There will be menu with alot of blank things, don't worry just click start
10. It will being you to a LG mobile support screen.
11. Wait till the meter completes
12. If it there's an error at the end saying connection failed do not worry the bar on your phone should begin moving
13. Your phone will then boot into stock and you can do what you want from there.