Hi all I'm trying to flash stock rom with sptools but It failed , My phone is not starting if I press power key its dead now please help
USB dubugging should be enabled to flash through SP Flash tools or even with adb.
Rahul Dhobi said:
Hi all I'm trying to flash stock rom with sptools but It failed , My phone is not starting if I press power key its dead now please help
Click to expand...
Click to collapse
Solution
Rahul Dhobi said:
Hi all I'm trying to flash stock rom with sptools but It failed , My phone is not starting if I press power key its dead now please help
Click to expand...
Click to collapse
I was facing same issue while flashing Stock Rom . Here is the solution To FIX this : Change your SPTool Version and Download SP_Flash_Tool_v3.1304.0.119 Please Google It as i am not allowed to put Outside link Before 10 posts
Fixed
Raj_Chandigarh said:
I was facing same issue while flashing Stock Rom . Here is the solution To FIX this : Change your SPTool Version and Download SP_Flash_Tool_v3.1304.0.119 Please Google It as i am not allowed to put Outside link Before 10 posts
Click to expand...
Click to collapse
Yes fixed by same SP_Flash_Tool_v3.1304.0.119 before 3-4 days ::good::good:
Great
Rahul Dhobi said:
Yes fixed by same SP_Flash_Tool_v3.1304.0.119 before 3-4 days ::good::good:
Click to expand...
Click to collapse
Happy To Hear That :good:
Related
Hi,
I have THL W11 32 GB, the device did not include google play so I called the seller and he give me a
A – flash tool " BirdA+FlashTool+exe+V1.7Beta "
and
B – firmware " ThL_W11.130806.JB42.V12.FHD.EN.COM.16P256_SEPARATION_MT6589T… "
So I shut down the device, Click power + vol up then Click on firmware upgrade
The flash starts and the end I got a green circle.
But after that the device NEVER switched on again! How can I fixed it?
now, I cann't switched on and when I pluged it in the power no battery meter is showing. even when I connect it to the
laptop I see a new unknown device is attached.
please help
Thanks
Link to download
Oracle1977 said:
Hi,
I have THL W11 32 GB, the device did not include google play so I called the seller and he give me a
A – flash tool " BirdA+FlashTool+exe+V1.7Beta "
and
B – firmware " ThL_W11.130806.JB42.V12.FHD.EN.COM.16P256_SEPARATION_MT6589T… "
So I shut down the device, Click power + vol up then Click on firmware upgrade
The flash starts and the end I got a green circle.
But after that the device NEVER switched on again! How can I fixed it?
now, I cann't switched on and when I pluged it in the power no battery meter is showing. even when I connect it to the
laptop I see a new unknown device is attached.
please help
Thanks
Click to expand...
Click to collapse
HI,
Please provide me the link to download the EN rom
ThL_W11.130806.JB42.V12.FHD.EN.COM.16P256_SEPARATION_MT6589T
Thanks
I've sent you a pm. I don't know if you received it.
En Firmware
this is the link for En firmware
http://mail.qq.com/cgi-bin/ftnExs_download?k=1b6438341cf316b556251c634531534c5456010d055204534e535e04051c55515454150d5b08584e055509575252545b50520801637261370b28676352004f5250540004551f2b215756166252034f252b2016712d1f222c2e4a0902330354553c377d64226320372a2b766b2e6557565b5d6c1a4d1f4f190a143809&t=exs_ftn_download&code=cd84c1ac
try to hold down the vol - and ten connect the usb, it should detect something
Can you send another link to ROM ?
This link is closed.
huys pls help me.. yesturday i recived my w11 and i flashed(update software) and get green circle and couldnt power up... pls help me guys
Pleta6 said:
huys pls help me.. yesturday i recived my w11 and i flashed(update software) and get green circle and couldnt power up... pls help me guys
Click to expand...
Click to collapse
Hi. Maybe you can try this way.
Flash a ClockWorkMode Recovery for 2GB/32GB if you have this model from here or from here if you have 1/16. If you can't flash from the device, try to do it from PC with Fastboot.
Then download a ROM from above same site (needrom.com) or from here and try if the device turns on. This late link contains a flashtool+ROM. So you can start from the beginning. It seems to me you need to take your device back alive
Bye.
sogol said:
Hi. Maybe you can try this way.
Flash a ClockWorkMode Recovery for 2GB/32GB if you have this model from here or from here if you have 1/16. If you can't flash from the device, try to do it from PC with Fastboot.
Then download a ROM from above same site (needrom.com) or from here and try if the device turns on. This late link contains a flashtool+ROM. So you can start from the beginning. It seems to me you need to take your device back alive
Bye.
Click to expand...
Click to collapse
thank you bro,but i fixed allredy with something else ) :good::good:
Pleta6 said:
thank you bro,but i fixed allredy with something else ) :good::good:
Click to expand...
Click to collapse
Dear Pleta6,
Good day.
How did you fix it?
Thanks
mrovariz said:
Can you send another link to ROM ?
This link is closed.
Click to expand...
Click to collapse
I'm here to find THL W11 the latest firmware, I don't have a try. Here: http://www.thlmobilestore.com/news/thl-w11-latest-official-firmware/
New awesome website
Please, guys, chek THIS NEW WEBSITE for our MTK smartphones
im after the english version for a Official Stock rom,, Thl W11 quad core 32 gb the B version,, the only ones i can find are altered chinese versions,,
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Take it to your nearest service center....I too did it before.
here
desmond16feb said:
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Click to expand...
Click to collapse
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
thanks but
slogger001 said:
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
Click to expand...
Click to collapse
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
windows version ?
desmond16feb said:
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
Click to expand...
Click to collapse
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
slogger001 said:
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
Click to expand...
Click to collapse
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Wor
desmond16feb said:
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Click to expand...
Click to collapse
I think its because of wrong scatter file try downloading ur rom from other site may help u
Hi ,
I have followed the Guide of the topic http://forum.xda-developers.com/galaxy-star/development/rom-custom-rom-fakitkat-t2808947
but i have a black screen and nothing appears but i can here the Boot sound so i know it boots but i can see nothing
so what is the problem ?!
GeDo7 said:
Hi ,
I have followed the Guide of the topic http://forum.xda-developers.com/galaxy-star/development/rom-custom-rom-fakitkat-t2808947
but i have a black screen and nothing appears but i can here the Boot sound so i know it boots but i can see nothing
so what is the problem ?!
Click to expand...
Click to collapse
i have the same problem !! please help ! :crying:
utkarsh agarwal said:
i have the same problem !! please help ! :crying:
Click to expand...
Click to collapse
its a problem for all when flashing rom first time
http://forum.xda-developers.com/showthread.php?t=2530683
flash this kernel through odin
Done
Enjoy!!!!!!!
(pm me on whatsapp if you have any problem
91 9773007346 )
psyduck said:
its a problem for all when flashing rom first time
http://forum.xda-developers.com/showthread.php?t=2530683
flash this kernel through odin
Done
Enjoy!!!!!!!
(pm me on whatsapp if you have any problem
91 9773007346 )
Click to expand...
Click to collapse
i cant flash it with odin
See the 3rd or 4th post there
Some1 hs uploaded bootimage.tar
Flash tht thru odin
Sent from my GT-S5282 using Tapatalk
please help me !!!
details
http://forum.xda-developers.com/galaxy-star/help/gallery-bug-t2815660
i flashed another stock rom and it worked THANKS everyone
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum + - key... Plz help...also not charging on switch off ...
shahrukh786 said:
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum + - key... Plz help...also not charging on switch off ...
Click to expand...
Click to collapse
why r u installing canvas 2 roms on canvas HD?....NEVER flash roms made for other phones without porting it
shahrukh786 said:
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum + - key... Plz help...also not charging on switch off ...
Click to expand...
Click to collapse
most probably u have bricked ur device by flashing a wrong firmware... All u can do is check if the PC is detecting ur phone...but first make sure u have the proper drivers installed...mobistel cynus T1 drivers...
Should i go service centr
edwardpage said:
most probably u have bricked ur device by flashing a wrong firmware... All u can do is check if the PC is detecting ur phone...but first make sure u have the proper drivers installed...mobistel cynus T1 drivers...
Click to expand...
Click to collapse
but my phone not starting ...charging also not going on....cmw recovery also not wht should i do .. Plz help bro
saurabhsunil said:
why r u installing canvas 2 roms on canvas HD?....NEVER flash roms made for other phones without porting it
Click to expand...
Click to collapse
help bro now wht can i do..am newbie plz....recovery not going on.....
shahrukh786 said:
but my phone not starting ...charging also not going on....cmw recovery also not wht should i do .. Plz help bro
Click to expand...
Click to collapse
just do What I told u...thats is the only way to check if the phone can be recovered..install the drivers ...take out battery , sim card from ur phone and connect it to ur pc..if its detected then u r saved..
edwardpage said:
just do What I told u...thats is the only way to check if the phone can be recovered..install the drivers ...take out battery , sim card from ur phone and connect it to ur pc..if its detected then u r saved..
Click to expand...
Click to collapse
if it detected then wht next pro.
shahrukh786 said:
if it detected then wht next pro.
Click to expand...
Click to collapse
if it gets detected, then u can easily flash stock rom on it..
shahrukh786 said:
help bro now wht can i do..am newbie plz....recovery not going on.....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1982587
go here follow the steps carefully
drivers:
https://drive.google.com/folderview?id=0B-7OcvYQ9Hyda3paTmFIVUNRYjA&usp=sharing
extract both zip files
there will be 2 xxx.inf files ,right click on both xxx.inf and click install, install it one by one
drivers will be installed....this worked for me when Mobistel_Cynus_T1_Drivers didnt work...
stock rom: http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A116/Software version/V5_181013/
SP flash tool: https://www.adrive.com/public/pKwp3X/SP_Flash_Tool_v3.1304.0.119.rar
and flash the stock rom according to 1st link...
saurabhsunil said:
http://forum.xda-developers.com/showthread.php?t=1982587
go here follow the steps carefully
drivers:
https://drive.google.com/folderview?id=0B-7OcvYQ9Hyda3paTmFIVUNRYjA&usp=sharing
extract both zip files
there will be 2 xxx.inf files ,right click on both xxx.inf and click install, install it one by one
drivers will be installed....this worked for me when Mobistel_Cynus_T1_Drivers didnt work...
stock rom: http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A116/Software version/V5_181013/
SP flash tool: https://www.adrive.com/public/pKwp3X/SP_Flash_Tool_v3.1304.0.119.rar
and flash the stock rom according to 1st link...
Click to expand...
Click to collapse
if i go service centre then how much cost
shahrukh786 said:
if i go service centre then how much cost
Click to expand...
Click to collapse
if the device gets detected then the cost will not be greater than 300.
shahrukh786 said:
if i go service centre then how much cost
Click to expand...
Click to collapse
sorry for l8 rply ,internet prob..
i dont have any idea but i think it should not be more than 300
as edwardpage said
Welcome
Today i present my ported recovery for Fire 2 lte i will share with you friends
I port it from Innjoo 2 lte Phone
First
Link of Download : http://www.mediafire.com/file/8gwbn643wy67g6c/recovery.img
Instructions
- Copy the download recovery.img to your internal memory
- Download kingroot and install it
- Root your device with kingroot
- install Rashr Application Link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools&hl=en
- First make a backup for your Recovery and then Flash the New Recovery
- Reboot to recovery Mode
- Enjoy
Tested Phones
-Innjoo Fire 2 Lte 2+16 (16GB ROM+2GB RAM)
IF you Like my work Press thanks and donate If you can
Credit
- Mediatek Phones
- MohammadEmbaby for his Twrp
soon it will be cm12.1 for this device
what useful
usefulWhy it should be useful if installed custom recovery and still no custom roms! !anyways thanks
boldheart0070 said:
usefulWhy it should be useful if installed custom recovery and still no custom roms! !anyways thanks
Click to expand...
Click to collapse
i manage to port cm12.1 but i need to fix some bugs
SO Stay tune
Shadow Of Leaf said:
i manage to port cm12.1 but i need to fix some bugs
SO Stay tune
Click to expand...
Click to collapse
Hope you do it quick
Good LUck
Any news about cm12.1 rom. :fingers-crossed:
Help MT6797 Innjoo Pro 2
Hello
I have purchased Innjoo pro 2 MT6797 but I cannot root it I am in bad luck.
Could you help me to make a custom recovery for my phone MT6797 Innjoo Pro 2.
I tried your ways but it seems not working in my phone and that because after successful flashing using SP flash tool it goes back to the factory recovery. like nothing happened.
also I cannot use bootloader because my phone is locked, and I couldn't find any way to unlock it. I cannot press volum up for "yes" to confirm the unlocking.
I appreciate in advance for your kind support
majedtech said:
Hello
I have purchased Innjoo pro 2 MT6797 but I cannot root it I am in bad luck.
Could you help me to make a custom recovery for my phone MT6797 Innjoo Pro 2.
I tried your ways but it seems not working in my phone and that because after successful flashing using SP flash tool it goes back to the factory recovery. like nothing happened.
also I cannot use bootloader because my phone is locked, and I couldn't find any way to unlock it. I cannot press volum up for "yes" to confirm the unlocking.
I appreciate in advance for your kind support
Click to expand...
Click to collapse
hello im glad to help
send me stock recovery.img to port a twrp for you ok
and as far as i know mediatek doesnt lock his bootloader weirdo
mirozeman said:
Any news about cm12.1 rom. :fingers-crossed:
Click to expand...
Click to collapse
i didn't find any mt6735 cm12.1 32bit support stable so i don't have any attend to port a bugged rom
Shadow Of Leaf said:
hello im glad to help
send me stock recovery.img to port a twrp for you ok
and as far as i know mediatek doesnt lock his bootloader weirdo
Click to expand...
Click to collapse
Thank you very much I appreciated
Really weird bro, when I try to execute the command on ADB "fastboot oem unlock" it gave me a manufacture warning for the unlocking and the choices are select yes to confirm or no doing it by pressing up or down volume, however, when I select yes by pressing up volume no response but when I press no it send me back to the recovery mode.
Something else, is when I try to flash the custom recovery from ADB, its give me a message that my device is locked.
Also, when I try to flash the custom recovery from "SP flash tool" it works, but I cannot boot to the custom recovery its like the OS refusing the flashed image and replace it with the factory one.
I have sent you privet message with the link of my public folder in google drive that contain the official recovery file, but its MT6757 not what I mentioned in the previous post
I couldn't post it here because I am still new in the forum.
majedtech said:
Thank you very much I appreciated
Really weird bro, when I try to execute the command on ADB "fastboot oem unlock" it gave me a manufacture warning for the unlocking and the choices are select yes to confirm or no doing it by pressing up or down volume, however, when I select yes by pressing up volume no response but when I press no it send me back to the recovery mode.
Something else, is when I try to flash the custom recovery from ADB, its give me a message that my device is locked.
Also, when I try to flash the custom recovery from "SP flash tool" it works, but I cannot boot to the custom recovery its like the OS refusing the flashed image and replace it with the factory one.
I have sent you privet message with the link of my public folder in google drive that contain the official recovery file, but its MT6757 not what I mentioned in the previous post
I couldn't post it here because I am still new in the forum.
Click to expand...
Click to collapse
ok thanks when i finish porting recovery
i will send you a link
Shadow Of Leaf said:
ok thanks when i finish porting recovery
i will send you a link
Click to expand...
Click to collapse
You have missed the link in your privet message
Mistake
majedtech said:
You have missed the link in your privet message
Click to expand...
Click to collapse
Hahahha im sorry i forgot to send you the link
this is the link http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
sorry again hahahaha
Shadow Of Leaf said:
Hahahha im sorry i forgot to send you the link
this is the link http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
sorry again hahahaha
Click to expand...
Click to collapse
Thank you Man
Its booted to the customer recovery, but I have problem the touch screen not responding I cannot swipe or do anything!!!!
majedtech said:
Thank you Man
Its booted to the customer recovery, but I have problem the touch screen not responding I cannot swipe or do anything!!!!
Click to expand...
Click to collapse
Weird touchscreen not working
let me do some changes and give you another recovery port
Shadow Of Leaf said:
Weird touchscreen not working
let me do some changes and give you another recovery port
Click to expand...
Click to collapse
Thanks bro
Just FYI, I have read in the web that there is same issue with some phones using TWRP V 3.0.3.
I am waiting for you .....
majedtech said:
Thanks bro
Just FYI, I have read in the web that there is same issue with some phones using TWRP V 3.0.3.
I am waiting for you .....
Click to expand...
Click to collapse
here it is http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
try this
Shadow Of Leaf said:
here it is http://www.mediafire.com/file/zw6dt6h6cdglkq1/TWRP+for+Innjoo+2+PRO.rar
try this
Click to expand...
Click to collapse
The file you gave me not booting to the custom recovery, its keep looping .
The first file you provided me yesterday is booting but no .
Shadow Of Leaf said:
i didn't find any mt6735 cm12.1 32bit support stable so i don't have any attend to port a bugged rom
Click to expand...
Click to collapse
Yeaaahh Finally I port Mokee Os Stable for Our phone
see Screenshots in attachements
majedtech said:
The file you gave me not booting to the custom recovery, its keep looping .
The first file you provided me yesterday is booting but no .
Click to expand...
Click to collapse
Im sorry to not answer you i didnt find a twrp for mt6757 to port it
I will try to port mt6753 twrp for you ok
Sorry again