Hi,
I need these files
1.fastboot flash recovery stock_recovery.smg
2.pudding_stock_unlock
Note : This site went offline http://mophoforum.com/Roms/1FF-sunf...198_7-CM-release-keys-signed-Sprint-US.sbf.gz, I also tried another website which is also not working.
Now the problem is I need this files fastboot flash recovery stock_recovery.smg as feautred here http://forum.xda-developers.com/showthread.php?t=1216143, rest pudding stock.rar also needed.
And according to this http://forum.xda-developers.com/showthread.php?t=1573727 it says that I need to enter into fastboot, however I have tried both method Volume up +Power button and Volume Down + Power button, but I cant enter in to fastboot, what I see is only Starting RSD protocol support
Regards
Related
guys recently I hard bricked my phone after installing lenovo lollipoprom.I also installed cwm through pc but not opened recovery. Thank to ed300 for providing custom recovery for lollipop I unbricked in very simple way
This will work for you if u are not able to enter into recovery
First install minimal adb and fastboot on your PC
Then connect your phone
Then transfer img file to adb and fastboot folder
Then open command window by right clicking and shift at same time
Disconnect ur phone type fastboot flash recovery 'img file name'
Waiting for device will be seen on CMD
Then enter into fastboot mode and then connect ur phone to PC
It will automatically start installing recovery
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
How to enter into fastboot mod
please tell me.
jatin vekariya said:
How to enter into fastboot mod
please tell me.
Click to expand...
Click to collapse
Dude seriously..???!!!
I asked you if you could enter in recovery or fastboo mode, and you said no, my phone just vibrates. If you didn't knew how to boot into fastboot you should've asked me right away.
Btw, here are the different key combos:
1) Recovery - Press VOL UP + VOL DOWN + POWER KEY and release POWER KEY once the lenovo logo shows up.
2) Fastboot - VOL DOWN + POWER KEY
3) Download Mode - VOL UP + POWER KEY
Multiple brick solution threads already exist, please search before posting your own.
Thread closed:
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
http://forum.xda-developers.com/lenovo-a6000/help/recovery-lost-t3395356/post67247279#post67247279
Hi all, i want to unblock bootloader for my Che2-L11 and I already get the 16-digit code from huawei website.
Unfortunately I fail in the first step because even the fastboot mode also cannot enter even I tried to use different method to enter the fastboot mode but still failed. .Anyone face this problem before ?
volume down + power button = no vibrate and straight enter system.
volume down + up+power = error message"no UPDATE.APP found".
After done research and I get know the UPDATE.APP is the file inside the dload folder that I was downloaded from hua wei website last few day for upgrade to 5.1.1 lollipop and yet now I copy the whole dload folder to sd card and try again see.
*will update if I can get in the fastmode
okay.........volume up+down+power is just upgrade the phone system and does not enter to fastboot mode.
I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Kylekassar said:
I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Click to expand...
Click to collapse
To use SP Flash tools, turn the phone off, press download on the software then plug the phone in. The preloader is only meant to show for a short time (a fraction of a second to a few seconds) so SPFT needs to be sending the signal to download in that time window.
What I've also found works is to press download on SPFT then press and hold power and volume up until the device starts downloading.
thx for the quick answer i will try a.s.a.p.
Kylekassar said:
thx for the quick answer i will try a.s.a.p.
Click to expand...
Click to collapse
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Kylekassar said:
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Click to expand...
Click to collapse
That could be a couple of things:
Which SPFT version are you using? If its an older version try using a newer one.
Or
The scatter file you loaded is not good, download a stock firmware and use the scatter file from that.
Try this:
fastboot flash recovery "filename".img
or
fastboot flash boot "filename".img
Do you have the MTK drivers installed? What does your phone appear as in the Device Manager? Like others have said, once you've chosen your scatter file and recovery to flash, hit download and then plug in the phone.
Managed to fix this? I have the exact same problem and not able to fix it till now....
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
chandlerp said:
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
Click to expand...
Click to collapse
Are you 100% sure the recovery.img you flashed was TWRP?
Absolutely. Downloaded from this very site. It was this one: recovery_TWRP_3021_P9000.img
---------- Post added at 02:23 PM ---------- Previous post was at 02:17 PM ----------
Did an OTA update this morning and am showing as on build number Elephone_P9000_20160608 now. Haven't tried flashing since the update as I'm at work with locked down computers. Was going to try again over the weekend. Which recovery and version of flash tools would you recommend trying this time?
thanks for any advice.
Actually I have the same problem.
I tried to reinstall the drivers because it seems to be not the correct one. Here is a pic: i.imgur.com/FoUnVyz.png
After I read somewhere that i can try and hold down Volume+ while connecting my phone to the pc where i started the download in sp tools prior.
I got this error code: STATUS_PRELOADER_INVALID(0xC0030004)
And here I am with a not-up-to-date elephone p9000.
Anybody care to help me?
I'm in the same situation, tried everything - flashtool recovery.img separate in download mode, flashtool in update mode full 7.0 with replaced original recovery.img with TWRP one, played with fastboot with no luck as did not find the way to OEM UNLOCK it - vol + not reacting. Bought the phone on Gearbest, looks like it's locked very hard.
Can't install TWRP
Me too! I've updated my p9000 to latest stock v7 rom with spft. I can't install twrp recovery despite getting a geen tick from spft. Tried four times but it won't overwrite the stock rom recovery. A locked bootloader seems to be the popular diagnosis but spft doesn't use the bootloader. What else could it be? Ideas very welcome.
Did you boot into recovery immediately after flashing? A normal system boot will overwrite TWRP with the stock recovery. Once you start TWRP there is an option to prevent this from happening.
Can't install TWRP
Thanks for the suggestion. I flashed twrp again but it won't boot into recovery afterwards without a restart, just hangs. Stiĺl on stock recovery.
I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
mosoo said:
I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
Click to expand...
Click to collapse
No need to open a separate threat. Check your post.
Why are you quoting my post and starting a new thread with it?
Hi all,
What I did:
- Install TWRP
- Installed a bad ROM through recovery mode
- #brick
Now:
- Stuck in mi logo bootloop
- I can't get to EDL
- I can get to fastboot, but I can't seem to run any commands on my PC
- I can't get to recovery mode
EDL Mode
- I can't seem to get to EDL mode where the red light flashes
- I have tried going to fastboot --> Removing power --> Power + and Power - and Power. Wait for Mi logo to flash twice, and it goes into "Power off mode"
- When I connect to USB again, it connects to the PC and charges
- In device manager, I can see Xiaomi Composite MDB Interface
- No connectivity over adb command
Fastboot Mode
- I can get into Fastboot
- Connect Fastboot into the PC, I am unable to run any adb or fastboot commands.
- Fastboot devices shows nothing, adb devices shows nothing
- In device manager, I can see Android Bootloader Interface
I've tried many soft options and have read through probably 30+ guides. I have not tried the test point method because I do not want to void my warranty.
Anyone experience this and can help?
Thanks!
Try re-installing the driver and see if those adb/fastboot commands work.
U said u installed TWRP right . Then u can go to recovery by pressing volume up+power button and then install another custom rom or stock rom but if u have unofficial unlocked bootloader then flashing stock rom will relock ur bootloader and device will not bootup.So go for another custom rom like resurrection remix its super stable n smooth too.
Follow these two tutorials.
http ://en.miui.com/thread-274589-1-1 . html
http ://en.miui.com/thread-235865-1-1 . html
To enter EDL mode, you need to unplug the battery, wait 10 seconds, replug it. Then, remove the USB plug, replace it, then while holding both volume + and -, plug the phone in the computer using the original cable.
Make sure to check what you're getting in device manager. If you get USB_BULK, you need to download the drivers. If you're getting diagnostics, you did the earlier procedure wrong so try it again. If you're getting 9008, you've gained access to EDL.