First
I install TWRP 2.7.1.0 touch recovery of LuK1337 using Odin...
It was success...
Second
I install GenNxt Pre-Rooted Stock of balliboxer using TWRP 2.7.1.0 touch recovery of LuK1337.
it was not successfuly, there was an error...
C:Unable to mount '/cache'
then when i open my phone its on a bootloop.
i can't use it.
Please help me in this problem..
It's the same as any almost any other Samsung that gets in a bootloop without a nandroid backup - use Odin and the original firmware to restore the phone back to stock and start over.
you can fix it easily by flashing the original firmware.
search on google for GT-i9060 original firmware and you will find a youtube video with a link in his description. then download the original rom (it's about 1300mb) and flash it via Odin.
please make a video about this plzzzzzzzzzzzzzz
Its useless//.
lelouch30 said:
First
I install TWRP 2.7.1.0 touch recovery of LuK1337 using Odin...
It was success...
Second
I install GenNxt Pre-Rooted Stock of balliboxer using TWRP 2.7.1.0 touch recovery of LuK1337.
it was not successfuly, there was an error...
C:Unable to mount '/cache'
then when i open my phone its on a bootloop.
i can't use it.
Please help me in this problem..
Click to expand...
Click to collapse
superlouro said:
you can fix it easily by flashing the original firmware.
search on google for GT-i9060 original firmware and you will find a youtube video with a link in his description. then download the original rom (it's about 1300mb) and flash it via Odin.
Click to expand...
Click to collapse
I tried both flash procedures.. but still i'm getting this bootloop..
lostteddy said:
I tried both flash procedures.. but still i'm getting this bootloop..
Click to expand...
Click to collapse
I think you forgot to factory reset before or after flashing
superlouro said:
I think you forgot to factory reset before or after flashing
Click to expand...
Click to collapse
I did that but the issue still persist..
do u find solution ?? i had same prob
Related
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
quaker1985 said:
HI all
My phone is stuck at boot animation.
My custom recovery is working (CWM 5.5.0.4) and i am able to flash different roms.
Even i am able to flash via odin.
But after reboot all roms are getting stuck at boot animation
I tried CM and sammy based both type of roms but same result.
BUT I FOUND ONE PROBLEM WHENEVER I TRY TO FORMAT DATA IN RECOVERY IT GIVES ERROR "ERROR MOUNTING DATA"
Please help me i even tried CM 9 but same result
Click to expand...
Click to collapse
your cwm recovery is way too old buddy! upgrade to the latest touch cwm or philz touch recovery!
just updated to new recovery CWM 6.0.3.2 touch, still same problem
quaker1985 said:
just updated to new recovery CWM 6.0.3.2 touch, still same problem
Click to expand...
Click to collapse
did you try flashing stock firmware via odin? then factory reset?
sriram231092 said:
did you try flashing stock firmware via odin? then factory reset?
Click to expand...
Click to collapse
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
quaker1985 said:
sorry i missed in first post but THANKS for such a quick reply.
I tried 4.2.2 leaked firmware(from sammobile) via ODIN.
If i need to flash any other stock rom PLEASE provide me link for the same
Click to expand...
Click to collapse
download the latest version of 4.1.2 of your country from www.sammobile.com. flash it via odin and then factory reset from the stock recovery. you should be able to boot into rom.
OK i m downloading the firmware let me try it
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
quaker1985 said:
OK i flash stock file with odin, but now my phone is stuck in bootloop.
During this bootloop notification light stays on all time.
Click to expand...
Click to collapse
did you factory reset from recovery immediately after flashing?
sriram231092 said:
did you factory reset from recovery immediately after flashing?
Click to expand...
Click to collapse
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
quaker1985 said:
no
Click to expand...
Click to collapse
then do it buddy! it is required
---------- Post added at 09:31 AM ---------- Previous post was at 09:03 AM ----------
quaker1985 said:
THanx a million
it booted
thank you thank you
PS
Is it ok if i try another rom
because i m afraid flashing again and again will cause further problems
Click to expand...
Click to collapse
you have a button to click and edit the thread title to solved.
Hi there please help
i have bricked my galaxy s3 gt 19300 while flashing with Siyah-s3-v1.9.1.tar
i have tried to reflash using CF-Root-SGS3-v6.4.tar and the older version CF-Root-SGS3-v6.3.tar.
i dont have a clue what i could do to fix this please help
Can you try flashing official firmware?
Sent from my Nexus 7 using Tapatalk
Siyah 1.9.1 is only for 4.1.2 did you tried it on 4.3.. if you did then are you able to go to ??
If you can go to recovery then just flash another kernel and you are good to go...
Sent from my GT-I9300
Mikey26 said:
Hi there please help
i have bricked my galaxy s3 gt 19300 while flashing with Siyah-s3-v1.9.1.tar
i have tried to reflash using CF-Root-SGS3-v6.4.tar and the older version CF-Root-SGS3-v6.3.tar.
i dont have a clue what i could do to fix this please help
Click to expand...
Click to collapse
can you get into recovery or download mode? if so, just reflash either a stock kernel zip (you can find them in perka's stash I think) or a stock rom (includes stock kernel). Should you have flased siyah on newer android versions, as mentioned this would also not work, just flash a kernel that supports it then and see.
kunal1540 said:
Siyah 1.9.1 is only for 4.1.2 did you tried it on 4.3.. if you did then are you able to go to ??
If you can go to recovery then just flash another kernel and you are good to go...
Sent from my GT-I9300
Click to expand...
Click to collapse
i cant find another kernal anyware. any chance you could post a link to one?
Mikey26 said:
i cant find another kernal anyware. any chance you could post a link to one?
Click to expand...
Click to collapse
i got an official firmware but everytime i flash it gets stuck on the samsung load screen
Mikey26 said:
i cant find another kernal anyware. any chance you could post a link to one?
Click to expand...
Click to collapse
Here you go...its boeffla....
http://forum.xda-developers.com/showthread.php?t=1964572
Sent from my GT-I9300
Mikey26 said:
i got an official firmware but everytime i flash it gets stuck on the samsung load screen
Click to expand...
Click to collapse
If a rom or kernel gets stuck after installing first thing to try is to go into recovery and factory reset.
tallman43 said:
If a rom or kernel gets stuck after installing first thing to try is to go into recovery and factory reset.
Click to expand...
Click to collapse
ive tried to wipe data and factory reset via the cwm based recovery but it says
Error mounting data
Skipping format
and when i reboot iam still stuck on the samsung logo
Mikey26 said:
ive tried to wipe data and factory reset via the cwm based recovery but it says
Error mounting data
Skipping format
and when i reboot iam still stuck on the samsung logo
Click to expand...
Click to collapse
Sounds like partition is corrupt!...Try flashing latest PhilZ recovery with odin and see if that mounts data if getting same error I suggest as a last resort to try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << try any and all other options suggested by people first.
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
elelamy said:
Hello
i have galaxy S3 GT i9300 running on stock rom 4.3 , i tried to flash this rom
SmartDroid AOSP V45.0 (b82)
http://forum.xda-developers.com/galaxy-s3/development/myown-cm11-build-todays-git140125-t2624535
but i got stucked in boot loop i follow the instruction very well and tried many times but in vain
i returned back to stock again
any help to make this rom a try?
Thanx
Click to expand...
Click to collapse
Install PhilZ recovery choose option in menu Wipe Data/Factory Reset then choose Clean to install a new rom this will wipe/format the correct files for you to flash your rom. (Make sure you have your rom on the ext sd card ready to flash! This will format your system partition so don't reboot untill you have immediately flashed the rom after wiping)..
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
elelamy said:
Thanks fir your reply
I already did exactly like u said but the same result bootloop
Is there any rom or kernil to fkash before flashing this romSmartDroid AOSP V45.0?
Click to expand...
Click to collapse
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
tallman43 said:
No.. nothing special to flash before installing.. Are you on latest PhilZ recovery?
Can you install other roms? ( To see if your phone will install other roms)
Have you tried factory resetting after flashing? (To clear any data issues that are causing a bootloop)
Have you tried downloading the rom again? ( could be a bad download)
Have you tried flashing the rom booting up the phone then flashing the gapps.
Also post the exact method that you are using to install..
Click to expand...
Click to collapse
It's solved now by using the latest philz
Thanks for helping
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?
Hello guys,
I yesterday updated to CM13(from cm11),found as an update in CyanogenMod Updates 18.12.2015.
I firstly thought that it wouldnt need new gapps or wipe data/cache,till i find out that after install my i9300 couldnt leave Boot.
After that i tried to do a factory reset/wipe cache partition/wipe dalvik and then reinstall cm13 update only to find out that the problem hasn't been resolved....
Should i try to install CM13 and Gapps 6.0 through ODIN?
what will fix my problem?
Thanks in advance for your time.
I also,tried to factory reset/etc. to install the previous update that i had (cm11 ) but the problem persists!
SOLUTION
So finally I resolved the issue!
Thanks very much for help v7!
I 'll write here all the steps that i did to find the solution in case someone in the future straggle with the same problem.
1)I ve incorrectly tried to install the CM13 as an CM update (previous version: CM11)
2)After the install I couldnt get pass the CM Boot icon and i could only access the recovery mode.
3)Tried to flash previous CM11 versions (also did factory reset,cache and dalvik) but it didn't help.
So the steps to the solution to the problem were:
1)Factory reset and power off the phone
2)Found (as v7 pointed) the stock firmware through here: http://samsung-updates.com/device/ (be carefull to choose the right hardware!)
3)Connect I9300 to Odin software While phone is in download mode (you can enter by pressing HOME Button+Power Button+Volume Down)
4)Choose through the PDA option in Odin the firmware that you 've downloaded (the file type will be in MD5 form so u might need to unzip first)
5)Hit Start Button and leave all the other features intact in ODIN!
6)after installation boot into the stock firmware that you ve just installed.
7)If the boot finished succesfully then continue:
8)Find an Software or a .tar file to REROOT your phone (i ve used CF-autoroot file,which i installed through odin -as you did with the stock firmware)
9)After installing the Root,Boot again the phone,download SuperSU (through playstore), then download root checker and finally flashify so you will be able to install TWRP recovery.
10)Approve Root checker and flashify through SuperSU(in order to verify your root and later flash TWRP)
11)Download latest TWRP (v7 suggested https://dl.twrp.me/i9300/twrp-2.8.7.3-i9300.img ) and copy it to your ext.SD Card.
12)Open Flashify and choose "Boot Image",select the twrp version you've copied in your SD Card and let it flash it.
13)After a succesfull flash,Power off your phone and press Home Button+Power Button+Volume Up to enter the TWRP recovery mode.
14)Through there you ll be able to install the latest CM13 followed by the GAPPS (which are needed in order to have access to Playstore)
You can download the latest Nightly version through here: http://get.cm/?device=i9300&type=nightly
and the latest GAPPS through here: https://www.androidfilehost.com/?w=files&flid=41043 *(i ve used the latest version of mini GAPPS just to be more precise).
PanosR. said:
Hello guys,
I yesterday updated to CM13(from cm11),found as an update in CyanogenMod Updates 18.12.2015.
I firstly thought that it wouldnt need new gapps or wipe data/cache,till i find out that after install my i9300 couldnt leave Boot.
After that i tried to do a factory reset/wipe cache partition/wipe dalvik and then reinstall cm13 update only to find out that the problem hasn't been resolved....
Should i try to install CM13 and Gapps 6.0 through ODIN?
what will fix my problem?
Thanks in advance for your time.
I also,tried to factory reset/etc. to install the previous update that i had (cm11 ) but the problem persists!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
What's your recovery version?Update to latest TWRP 2.8.7.3 abd flash the ROM.Make sure you use Slim GAPPS.
___
v7
XDA Assist
v7 said:
Hello,
Thanks for using XDA Assist.
What's your recovery version?Update to latest TWRP 2.8.7.3 abd flash the ROM.Make sure you use Slim GAPPS.
___
v7
XDA Assist
Click to expand...
Click to collapse
Hello,and thanks for your time!
i have ClockworkMod Recovery v6.0.4.6 (if thats what you mean).Should i update?and if yes,how?(through Odin?)
Any Link for the correct GAPPS?
Cause i ve downloaded "open.gapps-arm-6.0-full-20151113"
Should i install Cm13 and GAPPS through odin? cause i cant go back to cm11,as i ve edited.
Also,should be the kernel updated to boeffla?
PanosR. said:
Hello,and thanks for your time!
i have ClockworkMod Recovery v6.0.4.6 (if thats what you mean).Should i update?and if yes,how?(through Odin?)
Any Link for the correct GAPPS?
Cause i ve downloaded "open.gapps-arm-6.0-full-20151113"
Should i install Cm13 and GAPPS through odin? cause i cant go back to cm11,as i ve edited.
Also,should be the kernel updated to boeffla?
Click to expand...
Click to collapse
Moving your thread to S III Q&A,Help and Troubleshooting
Yes.Update the recovery to TWRP 2.8.6.0+.
You can find the .tar file here TWRP-I9300.Flash it from Odin.
Now from TWRP,flash CM13 followed by SLIM GAPPS.Make sure you flash both together else you'll face freezes.
___
v7
XDA Assist
v7 said:
Moving your thread to S III Q&A,Help and Troubleshooting
Yes.Update the recovery to TWRP 2.8.6.0+.
You can find the .tar file here TWRP-I9300.Flash it from Odin.
Now from TWRP,flash CM13 followed by SLIM GAPPS.Make sure you flash both together else you'll face freezes.
___
v7
XDA Assist
Click to expand...
Click to collapse
Ok!i ll download immidiately and keep you up to date if anything changes!
Btw Slim Mini or Zero GAPPS?
Hello again..
I ve downloaded the twrp file that you suggested "twrp-2.8.6.1-i9300.tar 7.7M",installed it throught ODIN (i got a Pass) but now i cant enter Recovery mode!
PanosR. said:
Hello again..
I ve downloaded the twrp file that you suggested "twrp-2.8.6.1-i9300.tar 7.7M",installed it throught ODIN (i got a Pass) but now i cant enter Recovery mode!
Click to expand...
Click to collapse
Hardware key combo isn't working?
___
v7
XDA Assist
v7 said:
Hardware key combo isn't working?
___
v7
XDA Assist
Click to expand...
Click to collapse
No,it stucks where "Samsung Galaxy I9300" appears and doesnt enter in recovery..
Nevertheless i reinstalled CWM,updated it and now and can re-enter recovery..
I tried to do again factory reset etc. etc.
installed the latest version of cm13 with the gapps that you suggested but i get stucked again in the boot..
I ve w8ed for 20minutes but it s still loading...
PanosR. said:
No,it stucks where "Samsung Galaxy I9300" appears and doesnt enter in recovery..
Nevertheless i reinstalled CWM,updated it and now and can re-enter recovery..
I tried to do again factory reset etc. etc.
installed the latest version of cm13 with the gapps that you suggested but i get stucked again in the boot..
I ve w8ed for 20minutes but it s still loading...
Click to expand...
Click to collapse
Did you try flashing the latest TWRP from CWM?
___
v7
XDA Assist
v7 said:
Did you try flashing the latest TWRP from CWM?
___
v7
XDA Assist
Click to expand...
Click to collapse
No,will this work?
Do i surely need twrp to install CM13?
Can't make it work through the latest CWM?
PanosR. said:
No,will this work?
Do i surely need twrp to install CM13?
Can't make it work through the latest CWM?
Click to expand...
Click to collapse
Flash the CM11 once and flash TWRP using Flashify app/TWRP Manager.
Link to latest TWRP 2.8.7.3.img
___
v7
XDA Assist
v7 said:
Flash the CM11 once and flash TWRP using Flashify app/TWRP Manager.
Link to latest TWRP 2.8.7.3.img
___
v7
XDA Assist
Click to expand...
Click to collapse
Flashed CM11 and again stucked at boot... 15mins since I boot..Should i wait more or is there a problem?
PanosR. said:
Flashed CM11 and again stucked at boot... 15mins since I boot..Should i wait more or is there a problem?
Click to expand...
Click to collapse
This is weird.Wait for 5-10 minutes.If it doesn't work,flash your stock firmware or restore a backup is you have one.
___
v7
XDA Assist
v7 said:
This is weird.Wait for 5-10 minutes.If it doesn't work,flash your stock firmware or restore a backup is you have one.
___
v7
XDA Assist
Click to expand...
Click to collapse
Hello again,finally!I ve been downloading with 50kb/s the stock firmware and i ve managed to install it.
So what do i do now? the phone boot up normally..
How do i finally install twrp and the cm13?
PanosR. said:
Hello again,finally!I ve been downloading with 50kb/s the stock firmware and i ve managed to install it.
So what do i do now? the phone boot up normally..
How do i finally install twrp and the cm13?
Click to expand...
Click to collapse
Root your phone via odin
Install twrp via odin
Flash cm13 with gapps via twrp
Enjoy
Note:backup your efs(for bad days)
SOLVED
So finally I resolved the issue!
Thanks very much for help v7!
I 'll write here all the steps that i did to find the solution in case someone in the future straggle with the same problem.
1)I ve incorrectly tried to install the CM13 as an CM update (previous version: CM11)
2)After the install I couldnt get pass the CM Boot icon and i could only access the recovery mode.
3)Tried to flash previous CM11 versions (also did factory reset,cache and dalvik) but it didn't help.
So the steps to the solution to the problem were:
1)Factory reset and power off the phone
2)Found (as v7 pointed) the stock firmware through here: http://samsung-updates.com/device/ (be carefull to choose the right hardware!)
3)Connect I9300 to Odin software While phone is in download mode (you can enter by pressing HOME Button+Power Button+Volume Down)
4)Choose through the PDA option in Odin the firmware that you 've downloaded (the file type will be in MD5 form so u might need to unzip first)
5)Hit Start Button and leave all the other features intact in ODIN!
6)after installation boot into the stock firmware that you ve just installed.
7)If the boot finished succesfully then continue:
8)Find an Software or a .tar file to REROOT your phone (i ve used CF-autoroot file,which i installed through odin -as you did with the stock firmware)
9)After installing the Root,Boot again the phone,download SuperSU (through playstore), then download root checker and finally flashify so you will be able to install TWRP recovery.
10)Approve Root checker and flashify through SuperSU(in order to verify your root and later flash TWRP)
11)Download latest TWRP (v7 suggested https://dl.twrp.me/i9300/twrp-2.8.7.3-i9300.img ) and copy it to your ext.SD Card.
12)Open Flashify and choose "Boot Image",select the twrp version you've copied in your SD Card and let it flash it.
13)After a succesfull flash,Power off your phone and press Home Button+Power Button+Volume Up to enter the TWRP recovery mode.
14)Through there you ll be able to install the latest CM13 followed by the GAPPS (which are needed in order to have access to Playstore)
You can download the latest Nightly version through here: http://get.cm/?device=i9300&type=nightly
and the latest GAPPS through here: https://www.androidfilehost.com/?w=files&flid=41043 *(i ve used the latest version of mini GAPPS just to be more precise).
Heykır said:
Root your phone via odin
Install twrp via odin
Flash cm13 with gapps via twrp
Enjoy
Note:backup your efs(for bad days)
Click to expand...
Click to collapse
Yeah already done mate!
Thanks,I just though that i wouldnt have to do the whole process again,but i find out few hours ago that this would be the only solution!
Thanks both of you for your time!