I am trying to make changes to my AT&T SGS5 to enable T-Mobile bands, so that I can get HSPA+ instead of EDGE off of my non-refarmed tower.
This would be similar to the process of restoring a changed QCN to effect NV programming like they were able to do on SGS4 (see this YouTube link: https://www.youtube.com/watch?v=eb0iCtG4T6I)
Note that I can make NV changes, but I just need a good T-Mobile G900T QCN file to work from (again, mine is AT&T G900A...)
Feel free to remove (using any hex editor) your IMEI from line 550 for your protection.
Instruction for how to pull your QCN using QPST can be found in the video and also here...: http://forum.xda-developers.com/showthread.php?t=2291589
No bricking, warranty is not void, and no knox is tripped when you do this via backup, but you must be rooted to get to the USB service menu *#0808# and if you are rooted, you already know what you are doing with your phone...
Much, much appreciated. Thank you
JJ_Boja said:
I am trying to make changes to my AT&T SGS5 to enable T-Mobile bands, so that I can get HSPA+ instead of EDGE off of my non-refarmed tower.
This would be similar to the process of restoring a changed QCN to effect NV programming like they were able to do on SGS4 (see this YouTube link: https://www.youtube.com/watch?v=eb0iCtG4T6I)
Note that I can make NV changes, but I just need a good T-Mobile G900T QCN file to work from (again, mine is AT&T G900A...)
Feel free to remove (using any hex editor) your IMEI from line 550 for your protection.
Instruction for how to pull your QCN using QPST can be found in the video and also here...: http://forum.xda-developers.com/showthread.php?t=2291589
No bricking, warranty is not void, and no knox is tripped when you do this via backup, but you must be rooted to get to the USB service menu *#0808# and if you are rooted, you already know what you are doing with your phone...
Much, much appreciated. Thank you
Click to expand...
Click to collapse
I can do it for you but it will have to be in the morning. I also need to install qpst on my pc. I don't know if I have a copy of it still
---------- Post added at 11:08 PM ---------- Previous post was at 11:03 PM ----------
JJ_Boja said:
I am trying to make changes to my AT&T SGS5 to enable T-Mobile bands, so that I can get HSPA+ instead of EDGE off of my non-refarmed tower.
This would be similar to the process of restoring a changed QCN to effect NV programming like they were able to do on SGS4 (see this YouTube link: https://www.youtube.com/watch?v=eb0iCtG4T6I)
Note that I can make NV changes, but I just need a good T-Mobile G900T QCN file to work from (again, mine is AT&T G900A...)
Feel free to remove (using any hex editor) your IMEI from line 550 for your protection.
Instruction for how to pull your QCN using QPST can be found in the video and also here...: http://forum.xda-developers.com/showthread.php?t=2291589
No bricking, warranty is not void, and no knox is tripped when you do this via backup, but you must be rooted to get to the USB service menu *#0808# and if you are rooted, you already know what you are doing with your phone...
Much, much appreciated. Thank you
Click to expand...
Click to collapse
I'm gonna give it a go right now but if I run into to any issues it will have to wait till the morning. By the way you might have wanted to post this in the q/a section or general this thread will defenitley be moved considering there are 2 post in the development thread that shouldnt be there
Thanks SpiroDave!
The *#7284# does not work on my dialer . It says unable to process request. I dont have anymore time tonight but if you want to search in the meantime for a solution for what I need to enter in my dialer that would help
spirodave said:
The *#7284# does not work on my dialer . It says unable to process request. I dont have anymore time tonight but if you want to search in the meantime for a solution for what I need to enter in my dialer that would help
Click to expand...
Click to collapse
AOS 4.4.2+: Get into USB menu via *#0808#, then choose "DM+MODEM+ADB"
JJ_Boja said:
I am trying to make changes to my AT&T SGS5 to enable T-Mobile bands, so that I can get HSPA+ instead of EDGE off of my non-refarmed tower.
This would be similar to the process of restoring a changed QCN to effect NV programming like they were able to do on SGS4 (see this YouTube link: https://www.youtube.com/watch?v=eb0iCtG4T6I)
Note that I can make NV changes, but I just need a good T-Mobile G900T QCN file to work from (again, mine is AT&T G900A...)
Feel free to remove (using any hex editor) your IMEI from line 550 for your protection.
Instruction for how to pull your QCN using QPST can be found in the video and also here...: http://forum.xda-developers.com/showthread.php?t=2291589
No bricking, warranty is not void, and no knox is tripped when you do this via backup, but you must be rooted to get to the USB service menu *#0808# and if you are rooted, you already know what you are doing with your phone...
Much, much appreciated. Thank you
Click to expand...
Click to collapse
Okay I just backed up my GS5 qcn for you .. I have to remove my Information out of it and I will have it up for you .. Please Hit thanks . Also do you have an email you want me to send it too when Im done?
Something to consider...
spirodave said:
Okay I just backed up my GS5 qcn for you .. I have to remove my Information out of it and I will have it up for you .. Please Hit thanks . Also do you have an email you want me to send it too when Im done?
Click to expand...
Click to collapse
Without IMEI, it's just a config file, so if it's all the same to you, you could also post it here so that it can help those who are hacking the next level of greatness with out phones...
JJ_Boja said:
Without IMEI, it's just a config file, so if it's all the same to you, you could also post it here so that it can help those who are hacking the next level of greatness with out phones...
Click to expand...
Click to collapse
Will that work for you? Is that all you need?
---------- Post added at 12:41 PM ---------- Previous post was at 12:34 PM ----------
This is the config file minus my IMEI . I have to link it to my cloud because because XDA is giving me invalid file type when uploading
here it is
https://www.dropbox.com/s/l5bpafws9eppaqa/GS5Hex?dl=0
---------- Post added at 12:45 PM ---------- Previous post was at 12:41 PM ----------
[/COLOR]
JJ_Boja said:
Without IMEI, it's just a config file, so if it's all the same to you, you could also post it here so that it can help those who are hacking the next level of greatness with out phones...
Click to expand...
Click to collapse
Do you need it as a qcn or will the config file work for you. After I edit it in winhex and save it , I can figure out how to save as qcn or if that is even possible.? I haven't used Qpst in a long time . It is a very helpful tool where the limits are endless
spirodave said:
Will that work for you? Is that all you need?
This is the config file minus my IMEI . I have to link it to my cloud because because XDA is giving me invalid file type when uploading
Click to expand...
Click to collapse
Thank you - it opened right up - exactly what I need!
JJ_Boja said:
Thank you - it opened right up - exactly what I need!
Click to expand...
Click to collapse
Hey I just put up a different config file . The first one I just deleted the IMEI without replacing with zeros . I just changed the link in the previous post where I replaced the imei with zeros.
I have a qcn file in my work at the service center when I get there I can give you one for T-Mobile and one for AT&T if you need them just let me know
Sent from my SM-G900T using Tapatalk
I pulled one from my phone about a week ago and sent it to him. You might want to post the QCN here for others to use if you still have it handy
JJ_Boja said:
Thank you - it opened right up - exactly what I need!
Click to expand...
Click to collapse
Well, did you get it to work?
Progress
gspears said:
Well, did you get it to work?
Click to expand...
Click to collapse
I think I am very close - will post my progress soon - please follow this thread: http://forum.xda-developers.com/gal...file-to-enable-aws-band-t2867331/post55474471
JJ
razielpr said:
I have a qcn file in my work at the service center when I get there I can give you one for T-Mobile and one for AT&T if you need them just let me know
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Yes, would you please post your QCN file. I am interested in comparing RF configuration among T-Mobile QCN's too - very curious if it varies (and of course it should vary between radio updates)..
Thanks,
JJ.
Could either of you use NV-reader-writer to dump your NV items 551-7000 (you will bypass NV 550 IMEI), so you would not need to worry about hiding it.
Spirodave - your QCN stopped at NV 5895 and I am not sure if this is all your phone has or if it's an issue with QPST not getting these out. NV 6000-7000 is the LTE band configuration info and not having these would tell me that your phone does not have LTE, which I am sure is not true...
Many thanks, JJ
JJ_Boja said:
Yes, would you please post your QCN file. I am interested in comparing RF configuration among T-Mobile QCN's too - very curious if it varies (and of course it should vary between radio updates)..
Thanks,
JJ.
Click to expand...
Click to collapse
OK I will be uploading both qcn tomorrow morning once I get to work.
Sorry for the late response I have been busy.
Sent from my SM-G900T using Tapatalk
Thanks. If possible, I would also ask you both to dump your NV 500-7225 using NV-reader-writer and then zero-out NV 550 (IMEI). This way it is actually possible to do comparison using a Merge tool, which saves a ton of time. But QCN file is still important, because it provides item descriptions... NV-reader-writer: http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar
razielpr said:
OK I will be uploading both qcn tomorrow morning once I get to work.
Sorry for the late response I have been busy.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Did you ever upload those?
Yes I will send you the links in PM
---------- Post added at 06:26 PM ---------- Previous post was at 06:23 PM ----------
thatotherguy.. said:
Did you ever upload those?
Click to expand...
Click to collapse
Check your PM I sent you a few QCN files.
Related
I have been trying to get service on the .368 or .42 or .62 firmware. So far I have only been able to boot the systems and play around with the apps and settings. I made a backup of each system and am sharing them here so that other r800x users can flash and mess around with the newer systems and that maybe someone smarter then me can figure out, if even possible, how we can get service on these systems as the cdma patch does not work on these. You will be able to use most of everything minus having no service what so ever.
Below are the links to each backup, Before flashing please make a backup of your current system if you dont have one already. All of these will boot with "Unknown Baseband" and "No Service"
Please read everyting before you install any of these
4.0.A.2.368 (2.3.3)
http://www.mediafire.com/?u04dbhea359gm8w
The [.368] R800x backup was made while on the .368 DoomKernel which you will find here http://forum.xda-developers.com/showpost.php?p=16291835&postcount=3
You will want to use the same kernel or you wont have any hardware buttons
4.0.2.A.0.42 (2.3.4)
http://www.mediafire.com/?ic33qd61ck39up6
4.0.2.A.0.62 (2.3.4)
http://www.mediafire.com/?idihgb2hdn928hf
EDIT : Will update backups
The [.42] and [.62] R800x Backups were made using the "Testing" CDMA DoomKernel V10 which you will find here http://forum.xda-developers.com/showpost.php?p=21948440&postcount=126
~You will want to use the same Kernels as I did or you may not have any hardware buttons~
Maybe someone can help with this part, the cdma patch is already known not to work on these systems, So I decompiled the SemcPhone.apk from the cdma patch zip file and compared all the smali files in smali folder to all the smali files in the [.62] decompiled smali folder I found some differences and I am posting a zip file of:
-all the smali files that were IN the cdma patch smali folder that were not in the [.62] smali folder
-a List of smali files that the [.62] smali folder HAD that the cdma patch smali folder did NOT have.
- the [.62] AndroidManifest.xml because it to had differences
The zip of differences can be found here http://www.mediafire.com/?kuv8x82vhthgp9c
Also Im posting a zip file containing the lib files from the 2.3.3 Verizon system which should be our Baseband files ( I could be wrong on which files are the baseband from our r800x), that can be found here http://www.mediafire.com/?afx0unj80ne1r2z
This is basically where I am at with getting service on newer Uk firmware for our r800x, I would gladly love anyones input and/or ideas. If Im wasting my time and someone who knows more then me already knows this wont ever work please let me know! I hope I made everything clear on what it all is and what Im trying to do, thanks for reading and any insight on service
I'm looking forward to seeing the progress that you'll make here. I hope you can find a working resolution.
Me too, I dont know much about the breakdown of ROMs but I will cross my fingers and think happy thoughts.
I have an ignorant question: what keeps you from flashing only the verizon baseband after flashing these other firmwares?
crono141 said:
I have an ignorant question: what keeps you from flashing only the verizon baseband after flashing these other firmwares?
Click to expand...
Click to collapse
I already tried, I flashed only the baseband from the 2.3.3 verizon ftf and copied over the 2.3.3 lib files manually aswell. Still says "unknown baseband" Did I do anything wrong?
Sent from my Droid using xda premium
Ah, porting a rom from one model to the other is especially a ***** when they have a different baseband. I attempted it myself once, but I failed miserably...
Good luck with this btw, I hope you get somewhere with it
Keiran
Any luck getting it to work?
KeiranFTW said:
Ah, porting a rom from one model to the other is especially a ***** when they have a different baseband. I attempted it myself once, but I failed miserably...
Good luck with this btw, I hope you get somewhere with it
Keiran
Click to expand...
Click to collapse
Thank you , perhaps you can help me with this thought..
~In your [WIP][CDMA] MIUI for the R800x , on page 3, last post on the page, you said you were gonna try a port from the Evo 4g because "it is the only one with the same baseband (htc anyway)"~
Would I be wasting my time downloading / messing around with the baseband files for the Evo 4g to help me out with this project? Or does that not even make sense in my case? Im just trying to "try" everything and anything that may help
216Monster said:
Thank you , perhaps you can help me with this thought..
~In your [WIP][CDMA] MIUI for the R800x , on page 3, last post on the page, you said you were gonna try a port from the Evo 4g because "it is the only one with the same baseband (htc anyway)"~
Would I be wasting my time downloading / messing around with the baseband files for the Evo 4g to help me out with this project? Or does that not even make sense in my case? Im just trying to "try" everything and anything that may help
Click to expand...
Click to collapse
Different chipset, probably won't work
Sent from my R800x using Tapatalk
---------- Post added at 04:15 PM ---------- Previous post was at 03:58 PM ----------
Have you tried entering the have you tried entering the service menu (*#*#4636#*#*) and checked to make sure it was on CDMA (just an idea)
paxChristos said:
Different chipset, probably won't work
Sent from my R800x using Tapatalk
---------- Post added at 04:15 PM ---------- Previous post was at 03:58 PM ----------
Have you tried entering the have you tried entering the service menu (*#*#4636#*#*) and checked to make sure it was on CDMA (just an idea)
Click to expand...
Click to collapse
Yes I tried that already as well. It has "unknown" selected an will not allow me to select any of the other options. Thanks for inputing an idea though
Have you tried pulling the libril files from Verizon 2.3.3, and compared them to the ones on the gsm versions? (librils are located in /system/lib, and there are two of them)
Sent from my R800x using Tapatalk
paxChristos said:
Have you tried pulling the libril files from Verizon 2.3.3, and compared them to the ones on the gsm versions? (librils are located in /system/lib, and there are two of them)
Sent from my R800x using Tapatalk
Click to expand...
Click to collapse
I'm my op I posted a zip containing what I thought were all the 2.3.3 lib files for the baseband, are there more then what I have? I'm going to look again and see if I missed any.
Sent from my Droid using xda premium
216Monster said:
I'm my op I posted a zip containing what I thought were all the 2.3.3 lib files for the baseband, are there more then what I have? I'm going to look again and see if I missed any.
Sent from my Droid using xda premium
Click to expand...
Click to collapse
They might only work on your phone (I know I tried pushing some on a different phone from somebody else's and adb did not like) (I haven't checked your zip yet...)
Sent from my R800x using Tapatalk
paxChristos said:
They might only work on your phone (I know I tried pushing some on a different phone from somebody else's and adb did not like) (I haven't checked your zip yet...)
Sent from my R800x using Tapatalk
Click to expand...
Click to collapse
They should be all the same, but I tried the CM7 ril libs in the .62 rom and I still had service. I think it is more in terms of the phone.apk and stuff
Because the phone app seems to do more than it lets out, I think it also handles communications with the baseband and not just your dialer - but I could be wrong, I have as much knowledge as you do on this
Keiran
i don't know if it's phone.apk as much as /system/app/SemcTelephonyProvider.apk ...
KeiranFTW said:
They should be all the same, but I tried the CM7 ril libs in the .62 rom and I still had service. I think it is more in terms of the phone.apk and stuff
Because the phone app seems to do more than it lets out, I think it also handles communications with the baseband and not just your dialer - but I could be wrong, I have as much knowledge as you do on this
Keiran
Click to expand...
Click to collapse
I think the phone.apk is doing a lot aswell. Its taking some time but I'm going through every smali/xml file in the semcphone.apk looking for anything in regards to a baseband.
Sent from my Droid using xda premium
paxChristos said:
i don't know if it's phone.apk as much as /system/app/SemcTelephonyProvider.apk ...
Click to expand...
Click to collapse
The libs I posted in my zip are from a clean full ftf flash of verizon 2.3.3 firmware on my phone, they should work for all r800x since that's what they are from.
I'm gonna look into the telephonyprovider app it could be a piece of the puzzle I haven't discovered yet, I think the phone.apk is handling most of it because the cdma patch has only a semcphone.apk in it, but maybe the newer firmwares will need a patched phone apk and telephony apk.
Sent from my Droid using xda premium
Hey, I tried this with a little bit of testing, and i thought you might wanna look into this:
pulled the system and ran regrep (recursive grep, a linux script i have):
2.3.4 (62)
Code:
./etc/customization/content/com/sonyericsson/r2r/client/preloaded_config.xml:7780: <preloaded-data mnc="01" mcc="270" operator-name="L LUXGSM" service-provider="P&T Luxgsm" service-provider-id="215">
./etc/event-log-tags:124:50112 gsm_rat_switched (cid|1|5), (network_from|1|5), (network_to|1|5)
./etc/event-log-tags:125:50113 gsm_data_state_change (oldState|3), (newState|3)
./etc/event-log-tags:126:50114 gsm_service_state_change (oldState|1|5), (oldGprsState|1|5), (newState|1|5), (newGprsState|1|5)
./etc/permissions/handheld_core_hardware.xml:58: <!-- GSM phones must also include android.hardware.telephony.gsm.xml -->
./etc/permissions/android.hardware.telephony.gsm.xml:20: <feature name="android.hardware.telephony.gsm" />
regrep cdma (I made some changes)
Code:
./etc/customization/settings/cust.prop:8:ro.cdma.home.operator.alpha=Verizon
./etc/customization/settings/cust.prop:9:ro.cdma.home.operator.numeric=310004
./etc/customization/settings/cust.prop:10:ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
./etc/customization/settings/cust.prop:11:ro.cdma.otaspnumschema=SELC,1,80,99
./etc/event-log-tags:122:50110 cdma_data_setup_failed (cause|1|5), (cid|1|5), (network_type|1|5)
./etc/event-log-tags:123:50111 cdma_data_drop (cid|1|5), (network_type|1|5)
./etc/event-log-tags:127:50115 cdma_data_state_change (oldState|3), (newState|3)
./etc/event-log-tags:128:50116 cdma_service_state_change (oldState|1|5), (oldDataState|1|5), (newState|1|5), (newDataState|1|5)
./etc/permissions/handheld_core_hardware.xml:59: <!-- CDMA phones must also include android.hardware.telephony.cdma.xml -->
./build.prop:25:ro.cdma.home.operator.alpha=Verizon
./build.prop:26:ro.cdma.home.operator.numeric=310004
./build.prop:27:ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
./build.prop:28:ro.cdma.otaspnumschema=SELC,1,80,99
regrep cdma (2.3.3)
Code:
./etc/customization/settings/cust.prop:12:ro.cdma.home.operator.alpha=Verizon
./etc/customization/settings/cust.prop:13:ro.cdma.home.operator.numeric=310004
./etc/customization/settings/cust.prop:14:ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
./etc/customization/settings/cust.prop:15:ro.cdma.otaspnumschema=SELC,1,80,99
./etc/event-log-tags:120:50110 cdma_data_setup_failed (cause|1|5), (cid|1|5), (network_type|1|5)
./etc/event-log-tags:121:50111 cdma_data_drop (cid|1|5), (network_type|1|5)
./etc/event-log-tags:125:50115 cdma_data_state_change (oldState|3), (newState|3)
./etc/event-log-tags:126:50116 cdma_service_state_change (oldState|1|5), (oldDataState|1|5), (newState|1|5), (newDataState|1|5)
./etc/permissions/handheld_core_hardware.xml:59: <!-- CDMA phones must also include android.hardware.telephony.cdma.xml -->
./etc/permissions/android.hardware.telephony.cdma.xml:20: <feature name="android.hardware.telephony.cdma" />
./build.prop:28:ro.cdma.home.operator.alpha=Verizon
./build.prop:29:ro.cdma.home.operator.numeric=310004
./build.prop:30:ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
./build.prop:31:ro.cdma.otaspnumschema=SELC,1,80,99
Update:
I know that Verizon downloads the data for APN to your phone for you (stupid Verizon)
When I tried putting in the APN, and clicked save, it didn't save... any ideas?
Just another Idea, does anybody know where it checks for the sim card?
---------- Post added at 08:42 AM ---------- Previous post was at 08:38 AM ----------
Interesting link (stackoverflow is perhaps the awesomest website ever, gave me a link to here)
Telephony manager does do alot of more than just sit there, we might wanna look into that and see what's pointing to it...
link: http://developer.android.com/reference/android/telephony/TelephonyManager.html
paxChristos said:
Just another Idea, does anybody know where it checks for the sim card?
Click to expand...
Click to collapse
I think the baseband does that
Sent from my R800i using Tapatalk
I have a Verizon Driod Incredible 2 flashed to Metropcs and whenever put it back to stock rom I am able to get mms... if I switch to a custom Rom no matter if configure APN the same way don't work.... I do have my data connection in all the cases with no problem... but I can't figured out how to make it work... please could someone explain how mms really work? Btw when somebody txt me a mms I got the notification but get stuck in downloading for ever... and sometime just said expired message... thanks in advance.
Artcotto
artcotto said:
I have a Verizon Driod Incredible 2 flashed to Metropcs and whenever put it back to stock rom I am able to get mms... if I switch to a custom Rom no matter if configure APN the same way don't work.... I do have my data connection in all the cases with no problem... but I can't figured out how to make it work... please could someone explain how mms really work? Btw when somebody txt me a mms I got the notification but get stuck in downloading for ever... and sometime just said expired message... thanks in advance.
Artcotto
Click to expand...
Click to collapse
Did you edit your build.prop to match metros numeric?
---------- Post added at 01:25 PM ---------- Previous post was at 01:20 PM ----------
artcotto said:
I have a Verizon Driod Incredible 2 flashed to Metropcs and whenever put it back to stock rom I am able to get mms... if I switch to a custom Rom no matter if configure APN the same way don't work.... I do have my data connection in all the cases with no problem... but I can't figured out how to make it work... please could someone explain how mms really work? Btw when somebody txt me a mms I got the notification but get stuck in downloading for ever... and sometime just said expired message... thanks in advance.
Artcotto
Click to expand...
Click to collapse
The numeric is your apns MCC+MNC.
For example my carriers mcc is 310 and the mnc is 004. So my build.prop numeric should be 310004.
---------- Post added at 01:29 PM ---------- Previous post was at 01:25 PM ----------
Also have you tried opening the voice dialer app, say "open apns" and then adding your apn. Make sure to name it, hit save and highlight the little circle out to the side to select that apn.
where do I edit this?
artcotto said:
where do I edit this?
Click to expand...
Click to collapse
The easiest way is the use ES File Explorer (or other file manager). Make sure to turn on Root Explorer, Up to Root, and Mount File System in the settings.
Then browse the the /system and you should see a file called build.prop. Make sure to back up this file (copy and put on your computer). Open the build.prop on your phone and find the line that looks similar to this "ro.cdma.home.operator.number=" there will be a number after the = sign. See if it matches the number from your apn. If not then change it to your numeric and hit save.
---------- Post added at 02:37 PM ---------- Previous post was at 02:30 PM ----------
You may need to restart your phone. Then try mms. If it doesn't work then add you apn manually using the voice dialer method.
showcasemodr said:
The easiest way is the use ES File Explorer (or other file manager). Make sure to turn on Root Explorer, Up to Root, and Mount File System in the settings.
Then browse the the /system and you should see a file called build.prop. Make sure to back up this file (copy and put on your computer). Open the build.prop on your phone and find the line that looks similar to this "ro.cdma.home.operator.number=" there will be a number after the = sign. See if it matches the number from your apn. If not then change it to your numeric and hit save.
---------- Post added at 02:37 PM ---------- Previous post was at 02:30 PM ----------
You may need to restart your phone. Then try mms. If it doesn't work then add you apn manually using the voice dialer method.
Click to expand...
Click to collapse
I did this and still not work... - BTW I'm using right now - JB 4.1.2 - Psycho-M4-vivow ROM - but this happened also with other ROMs that previously installed -
I still don't get it - understand how really MMS work? if I'm able to browse the internet and get 3G data connection - could I redirect MMS to go like an email using 3G data connection....
Please somebody help me to understand....
Thanks
artcotto said:
I did this and still not work... - BTW I'm using right now - JB 4.1.2 - Psycho-M4-vivow ROM - but this happened also with other ROMs that previously installed -
I still don't get it - understand how really MMS work? if I'm able to browse the internet and get 3G data connection - could I redirect MMS to go like an email using 3G data connection....
Please somebody help me to understand....
Thanks
Click to expand...
Click to collapse
Look up MetroPCS's apns (google is your friend) and see if the apn matches the apn found in /etc. Again you'll have to turn on root explorer and mount file system.
Send me a link to the rom you're using and I can see if the apns match MetroPCS for you.
showcasemodr said:
Look up MetroPCS's apns (google is your friend) and see if the apn matches the apn found in /etc. Again you'll have to turn on root explorer and mount file system.
Send me a link to the rom you're using and I can see if the apns match MetroPCS for you.
Click to expand...
Click to collapse
here is the link BTW this "THREAD IS CLOSED"
I have a backup of my apn setting that I did with apn backup & restore app when I was using stock ROM - "when it was working" I just restored and dont work....
I did try different ROM and whenever I have to return to stock ROM just restore my apn setting backup with the apps and work again - but I want to try AOKP for vivow - I been messing with some many GB Rom - and there are not perfect Rom - at lease this one is the most stable ROM that I tryed so far and want to get the MMS working - everything else like camera, internet, sms, email, battery & performance is really good....
anyway take a look and let me know! :good:
thanks!
artcotto said:
here is the link BTW this "THREAD IS CLOSED"
I have a backup of my apn setting that I did with apn backup & restore app when I was using stock ROM - "when it was working" I just restored and dont work....
I did try different ROM and whenever I have to return to stock ROM just restore my apn setting backup with the apps and work again - but I want to try AOKP for vivow - I been messing with some many GB Rom - and there are not perfect Rom - at lease this one is the most stable ROM that I tryed so far and want to get the MMS working - everything else like camera, internet, sms, email, battery & performance is really good....
anyway take a look and let me know! :good:
thanks!
Click to expand...
Click to collapse
Try adding your apn using this method: http://forum.xda-developers.com/showthread.php?t=2053705 (take a look at the backup file that you had from stock) and see if that will get it to work on the CM10 rom you're on right now.
Send me the link to the rom you want to try and I can see if I can edit it before you flash it. I assume you just flash a new rom and gapps through CWM or TWRP recovery?
artcotto said:
I have a Verizon Driod Incredible 2 flashed to Metropcs and whenever put it back to stock rom I am able to get mms... if I switch to a custom Rom no matter if configure APN the same way don't work.... I do have my data connection in all the cases with no problem... but I can't figured out how to make it work... please could someone explain how mms really work? Btw when somebody txt me a mms I got the notification but get stuck in downloading for ever... and sometime just said expired message... thanks in advance.
Artcotto
Click to expand...
Click to collapse
I'm sure stuffs like this belongs in the Android or general Q&A forum...
showcasemodr said:
Try adding your apn using this method: http://forum.xda-developers.com/showthread.php?t=2053705 (take a look at the backup file that you had from stock) and see if that will get it to work on the CM10 rom you're on right now.
Send me the link to the rom you want to try and I can see if I can edit it before you flash it. I assume you just flash a new rom and gapps through CWM or TWRP recovery?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1934288&highlight=aokp
artcotto said:
http://forum.xda-developers.com/showthread.php?t=1934288&highlight=aokp
Click to expand...
Click to collapse
TWRP...
Yes just flash new ROM and gapps - I been using this Rom for about 2 weeks... and it's pretty stable..
artcotto said:
TWRP...
Yes just flash new ROM and gapps - I been using this Rom for about 2 weeks... and it's pretty stable..
Click to expand...
Click to collapse
OK try this. I edited that build for metrics. Just flash it + gapps. https://www.box.com/shared/4q62y4p842xz1rihx5x4
Make a backup first!
Then once it has booted follow these steps to add an apn. https://www.box.com/shared/9oewrge4e4vy6x2bgxhz
showcasemodr said:
OK try this. I edited that build for metrics. Just flash it + gapps. https://www.box.com/shared/4q62y4p842xz1rihx5x4
Make a backup first!
Then once it has booted follow these steps to add an apn. https://www.box.com/shared/9oewrge4e4vy6x2bgxhz
Click to expand...
Click to collapse
AnyCut don't work on JB... keep FC
I used APN Manager - and make it system app....
everything is set as you said in the instrucctions...
but nothing happened yet -
I did sent a try mms but for more than 2 hours still showing like sending.... Reboot phone a couple time and still the same...
I still don't get how mms works!!!! ahhh... BTW I have 3G data with no problem, internet browsing and apps getting access with no problem...
BTW - thanks for the ROM modification for MetroPCS
thanks!!
artcotto said:
AnyCut don't work on JB... keep FC
I used APN Manager - and make it system app....
everything is set as you said in the instrucctions...
but nothing happened yet -
I did sent a try mms but for more than 2 hours still showing like sending.... Reboot phone a couple time and still the same...
I still don't get how mms works!!!! ahhh... BTW I have 3G data with no problem, internet browsing and apps getting access with no problem...
BTW - thanks for the ROM modification for MetroPCS
thanks!!
Click to expand...
Click to collapse
Hmm if you want just take a look at your stock mms apn or send it too me and I can add that to the rom before you flash it.. Maybe I didn't quite have the correct settings for MetroPCS mms apn.
So can you not just use the Voice Dialer app to open apns?
You're welcome on the rom mod for Metro, it's always nice when it shows your carrier instead of Verizon
artcotto said:
http://forum.xda-developers.com/showthread.php?t=1934288&highlight=aokp
Click to expand...
Click to collapse
Ok well after doing a bit more diggin on Metropcs it looks like it may not be as simple as the edits I have to do to my roms to get mms to work. Try digging around on here and seeing if any of these methods work for the Droid Incredible 2.
http://forum.xda-developers.com/showthread.php?t=2019779
showcasemodr said:
Ok well after doing a bit more diggin on Metropcs it looks like it may not be as simple as the edits I have to do to my roms to get mms to work. Try digging around on here and seeing if any of these methods work for the Droid Incredible 2.
http://forum.xda-developers.com/showthread.php?t=2019779
Click to expand...
Click to collapse
thank you for the link!!! finally is working but I didn't follow exactly like the link explain... everything was well setup but when I change the mms.apk, it work... I still don't understand how this work but maybe the mms.apk is modded to whoever carrier you are using....I guess, i'm not really sure!!!
anyway, Thank you!, Thank you!, Thank you!, Thank you!, Thank you!, Thank you!, Thank you!, ...
well that is great. I am glad it worked!
ok, I got the part of getting the proper APNs configuration.....
but what about replacing Mms.apk?
will that work for any other ROM?
what is the modification of Mms.apk....
artcotto said:
ok, I got the part of getting the proper APNs configuration.....
but what about replacing Mms.apk?
will that work for any other ROM?
what is the modification of Mms.apk....
Click to expand...
Click to collapse
I'm not sure why the modified mms.apk is needed. Someone has apparently made some edits to the mms.apk to get it to work with MetroPCS. You'd probably have the best luck posting which edits were made to the mms.apk. You could try taking a look at the base mms.apk and then looking at the edited mms.apk to see what was changed.
I assume it would work with other roms as long as they are based on the same source (i.e. JB). You can always try it and if it doesn't work then go about getting a newer modified mms.apk file for the version of android you are flashing.
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
pciccone said:
for help....
Click to expand...
Click to collapse
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
What steps did you use to root it and what kit?
pciccone said:
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
Click to expand...
Click to collapse
Did everything work out okay.
Sorry to bother you but I have been trying to find for the last few weeks the steps to root this phone "Hydro elite", Can you provide me with the steps or a link to the steps and tools you used. Thank you kindly.
fallenangelguard said:
Did everything work out okay.
Sorry to bother you but I have been trying to find for the last few weeks the steps to root this phone "Hydro elite", Can you provide me with the steps or a link to the steps and tools you used. Thank you kindly.
Click to expand...
Click to collapse
Use the 2nd option in Framaroot 1.6.1
Do it at your own risk.
Thank you
pciccone said:
Use the 2nd option in Framaroot 1.6.1
Do it at your own risk.
Click to expand...
Click to collapse
By the way did you get yours back to normal running order?
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
Thanks for posting this for me. It's a 12 hour download, but should work fine for me!
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
I cannot thank you enough! I am back working again! You ROCK!
pciccone said:
I am back
Click to expand...
Click to collapse
to you for breakfast)
Tell what Verizon unnecessary programs you deleted?
If your service provider Verizon, ask them whether the phone would support LTE in Europe
fallenangelguard For me works getting ROOT using motochopper http://forum.xda-developers.com/showthread.php?t=1940630
Need files
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
Please help.
mwuahjaan said:
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
Please help.
Click to expand...
Click to collapse
see mail
How to put Kyocera Hydro Elite on Diagnostic Mode
Can anyone share details
pciccone said:
Not alot of info on this somewhat new phone under Verizon. I rooted the Hydro Elite last night and immediately started cleaning up the Verizon bloatware. I must have went a little crazy and removed an APK from the system/app folder that is required for the phone function to run. I am now just getting FC's on 'com.android.phone' when not in airplane mode. Tried a factory reset to no luck, tried some APK restores from similar models, etc. In my arrogance of thinking I know what I am doing I did not backup the APK's I removed from the system/app folder. Normally this would be no big deal, I could just pull them from the ROM image, or reload an image, or whatever. But, it seems Kyocera or Verizon have absolutely no self-help ROM's on the net to reinstall nor has any custom ROMs been developed for this phone yet.
This is my cry for help.....
If there is anyone who has a Kyocera Hydro Elite (the new one) that could so kindly ZIP up their system/app folder for me I would HIGHLY appreciate it. So highly, in fact, I will buy you a lunch, dinner, or whatever it takes!
Click to expand...
Click to collapse
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
My friend is in the same situation. She had just finished rooting her phone and accidentally deleted some system files. Is it possible that one of you could send me a copy of that zip so that I can try to fix her phone?
Thanks in advance!
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
I need the same pack to bring my phone to life. I did the same mistake like that of OP.
firmware version 4.1.2 software modem 1.203VZ 2.006vz build number JZ054K from 27.11.2013
Please help.
sorry for my english
i need help
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
will this get me out of a bootloop? if so, will you send it to [email protected] would be greatly appreciated.
i messed up my wife's phone and now it won't boot
Sent from my XT862 using XDA Free mobile app. Pleaseee Can you send me the hydro elite system apks and what to do please? link I'm havin the same problem where I uninstalled the wrong app and I keep getting that popup com.phone has stopped working. Pleased I'm in need
---------- Post added at 11:55 AM ---------- Previous post was at 11:49 AM ----------
Sent from my XT862 using XDA Free mobile app
Can you please send me the hydro elite system apks and what to do please? link I'm havin the same problem where I uninstalled the wrong app and I keep getting that popup com.phone has stopped working.
need files
zema77 said:
see mail
Click to expand...
Click to collapse
can you send me the link ([email protected]) and the process of doing it. i really need this the same thing happened to me and i need to restore my phone!!!! im really in need for this.
system Kyocera c6750
Today I responded to all requests for system Kyocera c6750 in Private Messages. If someone has the ability, publish my link to the forum. My level does not allow to post a link to the forum.
+ at the current time the most complete information about the system \ setup \ recovery \... Kyocera HYDRO ELITE C6750 is on the Russian forum 4pda. I can not post a link, use search google "kyocera hydro elite c6750 4pda.ru"
Ok so ho do I use this?
Sent from my XT862 using XDA Free mobile app
---------- Post added at 07:55 PM ---------- Previous post was at 07:14 PM ----------
pciccone said:
I cannot thank you enough! I am back working again! You ROCK!
Click to expand...
Click to collapse
how do you use the zip?
CAN SOMEBODY JUST HELP ME BRING MY PHONE BACK TO LIFE!!!!!!!!!!!!!!!!!!!!!!!!! Goshhhhhhhhhhhhhhhhh
Kyocera c6750.zip 850 MB
zema77 said:
my system Kyocera c6750.zip 850 MB
I can not post a link, I can send mail
Click to expand...
Click to collapse
[email protected] thank you much send the link to this mail.:good::angel:
Tool is here
http://forum.xda-developers.com/showthread.php?p=52330836#post52330836
This is request thread to support your device
Guys If you want a EFS/IMEI backup yool which baclup full EFS + Modemst1 and modemst2 (Only making EFS backup have no meaning on Qcomm) just like I have made for N9005 here
http://forum.xda-developers.com/showthread.php?t=2698639
I requires some info from your device. (I don't own S5)
Here attached a application which can generate required info on Int SD card in form of
Dr.Ketan_flashingTool_report1_your device model.txt and Dr.Ketan_flashingTool_report2_your device model.txt
Kindly attach both report here on thread and then I can add support for S5 different models.
-Install attach apk
-Long press on generate report
-Once you get flash msg about report generated, look to Int SD card for above said file.
PS : This is not Backup Tool but just info generating tool, once i will have info I will make tool.
Here ya go. Thanks in advance!
Oh Thanks for reporting. I was about to believe S5 user doesn't need it anymore
Will make tomorrow. Again Thanks for reporting. Your device is SM-G900M correct?
dr.ketan said:
Oh Thanks for reporting. I was about to believe S5 user doesn't need it anymore
Will make tomorrow. Again Thanks for reporting. Your device is SM-G900M correct?
Click to expand...
Click to collapse
Cool. You're welcome and thank you! Yes. It's the factory unlocked, un-branded model for North, Latin and South America. klteub
Sent from my SM-G900M using Tapatalk
Sorry for delay, today quite busy with other work. will add it soon.
dr.ketan said:
Guys If you want a EFS/IMEI backup yool which baclup full EFS + Modemst1 and modemst2 (Only making EFS backup have no meaning on Qcomm) just like I have made for N9005 here
http://forum.xda-developers.com/showthread.php?t=2698639
I requires some info from your device. (I don't own S5)
Here attached a application which can generate required info on Int SD card in form of
Dr.Ketan_flashingTool_report1_your device model.txt and Dr.Ketan_flashingTool_report2_your device model.txt
Kindly attach both report here on thread and then I can add support for S5 different models.
-Install attach apk
-Long press on generate report
-Once you get flash msg about report generated, look to Int SD card for above said file.
PS : This is not Backup Tool but just info generating tool, once i will have info I will make tool.
Click to expand...
Click to collapse
Here it is for the T-Mobile variant (SM-G900T). Thanks for this!
Thanks will upload tonight or tomorrow morning.
But still any one on 900G can submit report?
Sent from my SM-N900 using xda premium
dr.ketan said:
Thanks will upload tonight or tomorrow morning.
But still any one on 900G can submit report?
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
Thanks,
Here's my report:
Thanks. Now will upload for all three model above.
Tool posted here
http://forum.xda-developers.com/showthread.php?p=52330836#post52330836
Support added for G900M/F/T
dr.ketan said:
Tool posted here
http://forum.xda-developers.com/showthread.php?p=52330836#post52330836
Support added for G900M/F/T
Click to expand...
Click to collapse
THANKS!!!!
hi
can you make this tool for G906S Korean S5 (http://forum.xda-developers.com/galaxy-s5/general/sm-g906s-k-l-owner-thread-t2807639
manmohan0339 said:
hi
can you make this tool for G906S Korean S5 (http://forum.xda-developers.com/galaxy-s5/general/sm-g906s-k-l-owner-thread-t2807639
Click to expand...
Click to collapse
I needs info from your device. You have install application from 1st post to collect information. After this PM me reports.
pulsaris said:
Thanks,
Here's my report:
Click to expand...
Click to collapse
Is this a tool that helps with backing up the modemst1+modemst2 image files?
And any idea whether this should work on non Samsung devices, such as an LG G3?
Thanks!
---------- Post added at 11:05 PM ---------- Previous post was at 11:03 PM ----------
If you can create one for the LG G3 (I'm with T-Mobile, if that matters), I'd gladly share it over in our threads giving you full and proper credit!:good:
This tool is device specific and won't work on other device unless mentioned in OP.
If you want to get tool for your device I may help you.
Check your inbox.
dr.ketan said:
This tool is device specific and won't work on other device unless mentioned in OP.
If you want to get tool for your device I may help you.
Check your inbox.
Click to expand...
Click to collapse
chip napdragon 800
my report for my samsung galaxy J (sc-02f), thanks you
dr.ketan said:
This tool is device specific and won't work on other device unless mentioned in OP.
If you want to get tool for your device I may help you.
Check your inbox.
Click to expand...
Click to collapse
please help, thanks you
dr.ketan said:
Tool is here
http://forum.xda-developers.com/showthread.php?p=52330836#post52330836
This is request thread to support your device
Guys If you want a EFS/IMEI backup yool which baclup full EFS + Modemst1 and modemst2 (Only making EFS backup have no meaning on Qcomm) just like I have made for N9005 here
http://forum.xda-developers.com/showthread.php?t=2698639
I requires some info from your device. (I don't own S5)
Here attached a application which can generate required info on Int SD card in form of
Dr.Ketan_flashingTool_report1_your device model.txt and Dr.Ketan_flashingTool_report2_your device model.txt
Kindly attach both report here on thread and then I can add support for S5 different models.
-Install attach apk
-Long press on generate report
-Once you get flash msg about report generated, look to Int SD card for above said file.
PS : This is not Backup Tool but just info generating tool, once i will have info I will make tool.
Click to expand...
Click to collapse
Please, help me with my Galaxy S5 Duos G900FD model
Thanks !
Can anyone confirm if there is any truth that the fsg and backup partitions contain backups of the modemst1 and modemst2 partitions?
I only have a backup of efs, fsg, and modem partitions and I think I need to get my modemst1 and/or modemst2 partitions restored. Everything works except I seem to have lost my 4G/LTE Band information for US Cellular.
I cannot recall if I did a nvbackup but I had read somewhere that it could be possible I do have backup of modemst1 and modemst2 already.
How can I check if I have good backups before doing an nvrestore?
This is on a Galaxy S4 Mini (SCH-R890).
lg volt 2 ls751
can anyone please post their stock system rom because i cant seem to to boot up mine (its a boost mobile model) cant get past the boost logo screen i've tried to boot into recovery and wiping data and cache nothing happened still stuck
lg volt 2 ls751
I killed mine too and can't get kingroot or kinguser etc. out of the firmware. halps!
---------- Post added at 10:10 PM ---------- Previous post was at 09:23 PM ----------
okay so I managed to un-**** mine. what you do is first ensure your phone is off, then hold down the volume down button then press and hold the home/power button until you get the restore mode screen. using your volume up and down to navigate and using thelock/power button to confirm, reseteverything it gives you the option to. from there reboot and it should be okay if our problems were in fact the same.
mazrik666 said:
I killed mine too and can't get kingroot or kinguser etc. out of the firmware. halps!
---------- Post added at 10:10 PM ---------- Previous post was at 09:23 PM ----------
okay so I managed to un-**** mine. what you do is first ensure your phone is off, then hold down the volume down button then press and hold the home/power button until you get the restore mode screen. using your volume up and down to navigate and using thelock/power button to confirm, reseteverything it gives you the option to. from there reboot and it should be okay if our problems were in fact the same.
Click to expand...
Click to collapse
it didnt work its probably a problem with my system and i still need a stock rom. so can you please make a backup of your system framework and send me a link to it please because it keeps saying problem with my framework when i use a stock recovery log please make a backup so i can download it and install it from my sd card
any updates on this guys?
mhowland24 said:
any updates on this guys?
Click to expand...
Click to collapse
Nope can you help us out?
please for the love of god anyone help
I have a Volt 2, and I'm willing to help if you still need it. Unfortunately, you're going to have to walk me through the process because I have zero knowledge of how to do it. You can reply to me on here, or send me an email, [email protected]
LG Volt 2/ LGLS751
SAMESIES
Did anyone ever figure this out?
durdypurdy563 said:
I have a Volt 2, and I'm willing to help if you still need it. Unfortunately, you're going to have to walk me through the process because I have zero knowledge of how to do it. You can reply to me on here, or send me an email, [email protected]
LG Volt 2/ LGLS751
Click to expand...
Click to collapse
can you help did anyone talk you through the process???
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Hmm I had no trouble rooting my volt 2 before the stagefright patch it seems like people are having issues after the fact.
Also I'd like to work on figuring out a bypass so we can get cyanogenmod ported on to the Volt 2. Where would the best place br to start looking for a bypass method?
Volt2 said:
Hmm I had no trouble rooting my volt 2 before the stagefright patch it seems like people are having issues after the fact.
Also I'd like to work on figuring out a bypass so we can get cyanogenmod ported on to the Volt 2. Where would the best place br to start looking for a bypass method?
Click to expand...
Click to collapse
Is there even a custom recovery for this phone
junoir0c1 said:
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Click to expand...
Click to collapse
Did you have your phone rooted???
Yet another user of the Boost Lg Volt 2 chiming in.
I managed to brick mine and a hard reset isn't cutting it.
I need a rom for this phone. Any rom at all, stock, rooted, unrooted, I'm not picky.
I supplicate the knowledgeable to make a rom, please.
try stylo
I bricked my volt 2 today , tried LG G Stylo guide (it is the same chip), this one works for me. my volt 2 is back and rooted!
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Did anyone ever figure this out? I'm in need of the stock ROM also. Any help would be great.
junoir0c1 said:
I just sent mine back to the company to fix it i should be getting back in a few weeks or so
Sent from my HTC Desire 510 using Tapatalk
Click to expand...
Click to collapse
Do you still have this device? If so, can you pull the firmware?
Gracias, señor!
Good lookin' out, buddy. That LG stylo guide took me from brick zero to hero in ten minutes!
onmyroute said:
I bricked my volt 2 today , tried LG G Stylo guide (it is the same chip), this one works for me. my volt 2 is back and rooted!
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Click to expand...
Click to collapse
LG-LS751-5.1.1-Dump.zip stock---still have the phone....works great-if need more
creativetrendz said:
Do you still have this device? If so, can you pull the firmware?
Click to expand...
Click to collapse
K hope this helps...not to sure what i was doing but figured i would try.......LG VOLT 2 LS751 ZIP files.........full dumphope it helps......oh and now my volt 2 is soft bricked from the last update.....pulled the zip off my dads.....doing my sons later for backups!!!! but if anyone has a helpful tip on what the crap i do next to make my volt work again im willing to copy whatever files needed off the working phone and upload for everyone........i need to know how though!!!.............hope this one is right............the build.prop file is in there.......
uploading to google drive now....be an hour at least with my connection.....soit is titled LG-LS751-5.1.1-Dump.zip from [email protected]
i will try to put a link to it up when its done.....but just incase i forget LOL.....
---------- Post added at 12:42 PM ---------- Previous post was at 12:39 PM ----------
Gadget8my8 said:
K hope this helps...not to sure what i was doing but figured i would try.......LG VOLT 2 LS751 ZIP files.........full dumphope it helps......oh and now my volt 2 is soft bricked from the last update.....pulled the zip off my dads.....doing my sons later for backups!!!! but if anyone has a helpful tip on what the crap i do next to make my volt work again im willing to copy whatever files needed off the working phone and upload for everyone........i need to know how though!!!.............hope this one is right............the build.prop file is in there.......
uploading to google drive now....be an hour at least with my connection.....soit is titled LG-LS751-5.1.1-Dump.zip from [email protected]
i will try to put a link to it up when its done.....but just incase i forget LOL.....
Click to expand...
Click to collapse
dont know how to pull firmware.....unless thatswhat i did.....send me email tutorials of whatever ya want please....
and if this one isn't right......please a guide on how to do it right! THANKX
there is too many files there
i heard that they make from these files flashable firmware
and there is also ls751
any one have idea how to deal with this ?
this is the link :
opensource.lge(dot)com/osList/list?curPage=2&m=Mc001&s