[Q] After flashing existenz Rom, Recovery does not boot - Xperia Z2 Q&A, Help & Troubleshooting

Hello,
I'll try to reboot into recovery but it starts normally.
When I try to shutdown the Z2 and boot (typing VOL UP) into recovery, it is always booting normally. So what can I do or how can I fix this? (i cannot post in the general thread of the rom because I'm new here.
The rom works perfectly, all fine.
Just added the xposed module "GravityBox", works fine too.
But I cannot boot into recovery..
Oh sh*t I saw it now on the top, no questions in general, I'm sorry!..

Please post questions in the Q&A section
Thread Moved

Guenn1337 said:
Hello,
I'll try to reboot into recovery but it starts normally.
When I try to shutdown the Z2 and boot (typing VOL UP) into recovery, it is always booting normally. So what can I do or how can I fix this? (i cannot post in the general thread of the rom because I'm new here.
The rom works perfectly, all fine.
Just added the xposed module "GravityBox", works fine too.
But I cannot boot into recovery..
Oh sh*t I saw it now on the top, no questions in general, I'm sorry!..
Click to expand...
Click to collapse
I think you have to reinstall recovery
Im not sure if existenz supports recovery for locked bootloader

Hey!
I've an unlocked bootloader. I've first flashed CWM with fastboot before I installed the Rom.
Is there an official boot.img what I can flash in fastboot so I've got my recovery back without losing intern data?
Sent from my D6503 using XDA Free mobile app

Guenn1337 said:
Hey!
I've an unlocked bootloader. I've first flashed CWM with fastboot before I installed the Rom.
Is there an official boot.img what I can flash in fastboot so I've got my recovery back without losing intern data?
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
you can use flashtool, (flashtool.net)
you will need a FTF which can be found at teh top of the general section, just exclude all of them exept kernel, that way you can get the stock kernel back

Hey there!
I don't want stock rom, I could do it if I want.
I'm just wondering about the eXistenZ Rom, am I the only one without a working recovery after flashing?
I just want my CWM recovery back between the eXistenZ Rom.
Thanks.
Sent from my D6503 using XDA Free mobile app

Guenn1337 said:
Hey there!
I don't want stock rom, I could do it if I want.
I'm just wondering about the eXistenZ Rom, am I the only one without a working recovery after flashing?
I just want my CWM recovery back between the eXistenZ Rom.
Thanks.
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Install cwm again how you installed before, as said i dont think existenz supports your recovery method hence it wont be there after installing which means you would need to reinstall
If you installed via fastboot then this is fairly odd as it shouldent of happened

Envious_Data said:
Install cwm again how you installed before, as said i dont think existenz supports your recovery method hence it wont be there after installing which means you would need to reinstall
If you installed via fastboot then this is fairly odd as it shouldent of happened
Click to expand...
Click to collapse
But with the same method as before it won't work again (first via fastboot then install zip in cwm)..
So I think, I'll try to do a backup in any way and install cwm again like before.
Damn I don't want to reflash.. I spent to much work in the settings, design and system.
Crap, so no other possible way for a solution?? :banghead:
Sent from my D6503 using XDA Free mobile app

Guenn1337 said:
But with the same method as before it won't work again (first via fastboot then install zip in cwm)..
So I think, I'll try to do a backup in any way and install cwm again like before.
Damn I don't want to reflash.. I spent to much work in the settings, design and system.
Crap, so no other possible way for a solution?? :banghead:
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
If you have a unlocked bootloader you can install advanced stock kernel or doomkernel
And reflashing the rom or flashing across stock based roms you dont need to wipe data

Envious_Data said:
If you have a unlocked bootloader you can install advanced stock kernel or doomkernel
And reflashing the rom or flashing across stock based roms you dont need to wipe data
Click to expand...
Click to collapse
Ah yeah you're right, I don't have to wipe data!
I've created a nandroid backup with the nandroid online app.
The app fails with backing up /boot and /recovery path :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.. so no way, I have to reflash.
Sent from my D6503 using XDA Free mobile app

hi need help
i just flash existenz rom then after aroma installed no it stay on sony logo?what should i do

fhelix17 said:
i just flash existenz rom then after aroma installed no it stay on sony logo?what should i do
Click to expand...
Click to collapse
this is not part of my question, open a new question thread for that.
@Envious_Data:
Problem solved, just erased boot and reflashed CWM boot.img with fastboot, my Xperia Z2 is booting without problems, LED turns pink on Sony logo and is booting eXistenZ , no data loss. Yeha! Thank you for your support.

Related

Rooting WITHOUT using Odin?

Hi all.....I have the Gal W and my wife has an S2. I recently rooted my phone and flashed CM9 to it. Everything I've done to my phone, I've done without Odin (just couldn't get it to work).
My wife has seen how my phone operates (nova launcher, lack of bloatware etc) and has decided she wants the same for her phone....I'd like to do this for her but I WILL NOT use Odin. Is there any other option to allow me to accomplish this.....btw if it's important, her S2 is locked to 3UK and originally came with gingerbread (has had OTA upgrade to ICS).
So to surmise...
I need a rooting zip that I can flash with stock recovery
And info about CWM for S2 for possible custom rom flashing......all WITHOUT Odin......many thanks...Keith
Sent from my GT-I8150 using xda app-developers app
This is the most simple easy afaik rooting method without using odin
http://forum.xda-developers.com/showthread.php?t=1501719
Sent from my GT-I9100 using xda app-developers app
Thanks Adam, as soon as I can pry the phone from her grip (lol) I'll give it a go....
Sent from my GT-I8150 using xda app-developers app
Nevermind bro.. dont try it when u're both busy in bedroom coz it'll be messed up & root automatically...
Sent from my GT-I9100 using xda app-developers app
OK, so I followed the instructions in the link, installed the zips and......
It worked, but the root is non persistent....not permanent....can anybody tell me how to obtain permanent root without resorting to ODIN?.....
CM9...I don't HAVE to.....I just.....can..
How can u said the root wasn't permanent by? Is there a superuser app in the apps drawer? Or any app didn't get permitted?
Sent from my GT-I9100 using xda app-developers app
Rachmat3 said:
Simple way to root and unroot stock kernel without flashing insecure kernel.
Don't worry about custom counter and yellow triangle, with this method they never appear, because we only rooting, it's a rooting script not a custom kernel.
This rooting script included Busybox installer.
Rooting
Download this File first and put in your SDCARD
- CWM via stock recovery or download zip from http://clockworkmod.com/rommanager
- SU-Busybox-Installer.zip
Reboot to recovery.
Choose apply update from external storage.
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard or external SD
Choose and Install SU-Busybox-Installer.zip
Reboot
You are done and now your device is Rooted
Unroot
Download this File first and put in your SDCARD
- CWM via stock recovery or download zip from http://clockworkmod.com/rommanager
- SU-Uninstaller-Signed.zip
Reboot to recovery.
Choose apply update from external storage.
Choose CWM.zip and wait until CWM recovery appear.
Choose install zip from sdcard
Choose and Install SU-Uninstaller-Signed.zip
Reboot
You are done and now your device is Unrooted
Tested on latest stock Galaxy S II ICS rom.
Tested on latest Galaxy Note by some user (thanks for report)
Note: This method should work for other device with ICS rom, check CWM that compatible for your device here http://clockworkmod.com/rommanager
Mirror:
CWM.zip - http://turbobit.net/24a3a40uri08.html
SU-Busybox-Installer.zip - http://turbobit.net/gg8gyz535ouo.html
SU-Uninstaller-signed.zip - http://turbobit.net/7miov7grs1m1.html
Please
and don't forget to hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if you like my work.
Click to expand...
Click to collapse
I tryed to do the same.. But not working for me. I.m using android 4.0.3 official.
I entered to recovery mod, i installed cwm but when i want to do someting in cwm manager i can.t.. I can only give reboot and that.s all.
Help me please dude ?
Sent from my GT-I9100 using XDA Premium HD app
Sent from my GT-I9100 using XDA Premium HD app
@Adam....the cwm installed fine and I was able to use it to install busy box and super user, but when I rebooted the phone and tried to set up busybox, it told me I didn't have root access. I rebooted the phone into recovery and the CWM screen had been replaced with the stock recovery screen. I guess this method can be used to grant super user permissions while in recovery but not in normal boot mode.....
CM9...I don't HAVE to.....I just.....can..
@smartceleron....this is a 'touch' version of cwm......the buttons won't work ...
CM9...I don't HAVE to.....I just.....can..
keithross39 said:
@Adam....the cwm installed fine and I was able to use it to install busy box and super user, but when I rebooted the phone and tried to set up busybox, it told me I didn't have root access. I rebooted the phone into recovery and the CWM screen had been replaced with the stock recovery screen. I guess this method can be used to grant super user permissions while in recovery but not in normal boot mode.....
CM9...I don't HAVE to.....I just.....can..
Click to expand...
Click to collapse
Ok. In ur case now. Would u like to advance to install custom rom + custom kernel like latest cm10+dorimanx 7.2. It was very good combination for me for features, performance & battery life. A root will perfectly included.
Cm10 > general section, dorimanx > development section.
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
smartceleron said:
I tryed to do the same.. But not working for me. I.m using android 4.0.3 official.
I entered to recovery mod, i installed cwm but when i want to do someting in cwm manager i can.t.. I can only give reboot and that.s all.
Help me please dude ?
Sent from my GT-I9100 using XDA Premium HD app
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Use ur vol up/down to navigate & power button to execute.
Sent from my GT-I9100 using xda app-developers app
Adam Hui said:
Ok. In ur case now. Would u like to advance to install custom rom + custom kernel like latest cm10+dorimanx 7.2. It was very good combination for me for features, performance & battery life. A root will perfectly included.
Cm10 > general section, dorimanx > development section.
Sent from my GT-I9100 using xda app-developers app
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
Use ur vol up/down to navigate & power button to execute.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Hi mate, I asked her about that and she said that it took her long enough to 'like' ICS after the update from GB. What she wants, is for me to get rid of the bloatware (Gemini app manager) Install a root only launcher (nova), apply a root only theme on top of that (crimson cobalt) and stop the popup ads (adaway)....while keeping it all ICS based. So all I need is root access that doesn't disappear in normal boot mode.......
CM9...I don't HAVE to.....I just.....can..
If so then d/l & flash dorimanx kernel
http://forum.xda-developers.com/showthread.php?t=1617219
It'll takes about 7mb & 2 mnts if u have a good connection. Root will be included.
Sent from my GT-I9100 using xda app-developers app

YP-G70 help

I'm terribly sorry is this is the wrong place to post this, but I'm new to the whole 'forums' in general thing.
A while ago, a friend came to me and said his android was growing buggy, so I told him how to factory reset it and such. Then I rooted it for him to clear it of any stock apps he didn't want. Now I've currently got the device next to me, and I've tried installing a custom rom onto it for him, to help make his device a bit faster and less buggy. I tried installing PAC-ROM ( http://forum.xda-developers.com/showthread.php?t=2235446 ), but I got the same error in CWM that I got when I tried to flash my HTC Glacier, which was remedied by updating to the latest CWM. I tried updating CWM from its current 5.0.2.7 to something 6.0+, but the 5.0 version sticks, which might be due to the fact that I used ODIN to flash the CWM according to a different XDA forum, which I cannot locate right now. Now, after attempting to flash PAC-ROM, and getting said errors, I seem to be unable to remount anything from CWM (/system, /data, etc), so the device cannot boot.
Is the device bricked for good, or is there something that can help me? I'm not totally inexperienced with flashing/customizing android, but I'm not great at it either.
Thanks for the help in advanced.
uhhh, what exactly did you flash to upgrade CWM? Did you use something for another device? Because you arent supposed to do that.
I would reboot into download mode, and then flash the stock firmware. Then you can flash a either RJ's kernel (for INTL) or Entropy's kernel (US) depending on what device you have. To flash PAC, you have to first flash a cm9 rom, reboot into recovery, and then flash PAC
iurnait said:
uhhh, what exactly did you flash to upgrade CWM? Did you use something for another device? Because you arent supposed to do that.
I would reboot into download mode, and then flash the stock firmware. Then you can flash a either RJ's kernel (for INTL) or Entropy's kernel (US) depending on what device you have. To flash PAC, you have to first flash a cm9 rom, reboot into recovery, and then flash PAC
Click to expand...
Click to collapse
I've reflashed stock through ODIN, and this showed up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do a wipe data and see if your errors are resolved
iurnait said:
Do a wipe data and see if your errors are resolved
Click to expand...
Click to collapse
I did, it gave me the 'error can't mount /system, /data, etcetc' thing, and then rebooted, and now it's stuck in CWM.
you probably need to find the pit file and flash that via odin. just keep holding the power and volume down keys until you are in recovery. then put the pit file in odin along with the stock firmware and flash.
Pits:
http://forum.xda-developers.com/showthread.php?t=1389873
iurnait said:
you probably need to find the pit file and flash that via odin. just keep holding the power and volume down keys until you are in recovery. then put the pit file in odin along with the stock firmware and flash.
Pits:
http://forum.xda-developers.com/showthread.php?t=1389873
Click to expand...
Click to collapse
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
TacoSeeker said:
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
Click to expand...
Click to collapse
After trying a few more times, I end up with the same screen as I posted before, the android recovery screen.
try downloading and extracting this: http://forum.xda-developers.com/attachment.php?attachmentid=812772&d=1323614740
this contains odin version 1.81, which has always worked for me.
TacoSeeker said:
Found the stock here http://forum.xda-developers.com/showthread.php?t=2192488 , but I get errors when trying to flash everything.
Click to expand...
Click to collapse
That PIT file is invalid. It has never worked and never will. If you need the pit file then get it from Adam Outler's post that has all the PIT files for the all players 5.0.
I didn't know what I was doing when I made it. I just dumped the partition that has the pit file on it and that is what that is. NO ONE SHOULD EVER USE ueki8.pit FROM YP-G70_UEKI8_MIN !!!
Try using Heimdall.
TheKryptonite said:
Try using Heimdall.
Click to expand...
Click to collapse
Heimdall says it can't connect to the devices, libusb error -12
iurnait said:
try downloading and extracting this: http://forum.xda-developers.com/attachment.php?attachmentid=812772&d=1323614740
this contains odin version 1.81, which has always worked for me.
Click to expand...
Click to collapse
Even after flashing using that, it still returns me to either the download screen, or the recovery screen.
Now the devices is stuck in a state where it won't exit download mode.
TacoSeeker said:
Heimdall says it can't connect to the devices, libusb error -12
Click to expand...
Click to collapse
Are you drivers installed? Did you install the drivers on Zadig?
TheKryptonite said:
Are you drivers installed? Did you install the drivers on Zadig?
Click to expand...
Click to collapse
Yes, I always stay updated on drivers on my PC.
TacoSeeker said:
Yes, I always stay updated on drivers on my PC.
Click to expand...
Click to collapse
Try uninstalling the Samsung drivers and Kies. Try to find the Samsung device and replacing/installing all drivers.
TheKryptonite said:
Try uninstalling the Samsung drivers and Kies. Try to find the Samsung device and replacing/installing all drivers.
Click to expand...
Click to collapse
Same result as before.
Try the instructions here. http://forum.xda-developers.com/showthread.php?p=44192192
Meticulus said:
Try the instructions here. http://forum.xda-developers.com/showthread.php?p=44192192
Click to expand...
Click to collapse
After all that, I still get the screen showed in my previous comment,

my i9300 is having a mysterious issue :/

Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
ahmed bahaa said:
Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
Click to expand...
Click to collapse
AFAIK that is the logo for stock recovery...try press the power button and it should appear the options to wipe etc, or try to install TWRP recovery and download ArchiDroid 1.7.18 is the best stock rom out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
ahmed bahaa said:
Hello everyone!
I was previously running custom rom (C-rom 4.4.4) and yesterday i wanted to shift to stock, so i downloaded the latest I9300 file from sammobile (Jellybean 4.3) and flashed it directly using odin in download mode (i opened the download mode from power menu)
the device rebooted twice after which it is stuck on the samsung logo and not proceeding at all, tried going to recovery it booted into recovery but showing this symbol at the center of the screen, i noticed that i cant go down and the vol down button is dead for me, and this means i cant wipe data nor go to download mode anymore
anyone here knows any solution for this issue? i wanna go back to stock rom
Click to expand...
Click to collapse
Sounds like you didn't wipe data/factory reset before flashing via Odin. Try flashing cwm or twrp via Odin, go into recovery, wipe all data and cache, and then reflash stock ROM via odin.
Sent from my GT-I9300 using Tapatalk
gabyif said:
AFAIK that is the logo for stock recovery...try press the power button and it should appear the options to wipe etc, or try to install TWRP recovery and download ArchiDroid 1.7.18 is the best stock rom out there
Sent from my GT-I9300 powered by ArchiDroid+ArchiKernel
Click to expand...
Click to collapse
where to press the power button?
how to flash TWRP when i cant open download mode?
am2012 said:
Sounds like you didn't wipe data/factory reset before flashing via Odin. Try flashing cwm or twrp via Odin, go into recovery, wipe all data and cache, and then reflash stock ROM via odin.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
dude how can i do that when i cant open download mode? and how to wipe the data when my vol down button not working?
ahmed bahaa said:
where to press the power button?
how to flash TWRP when i cant open download mode?
dude how can i do that when i cant open download mode? and how to wipe the data when my vol down button not working?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just trying to help mate. Good luck.
Sent from my GT-I9300 using Tapatalk
am2012 said:
Just trying to help mate. Good luck.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
lol...it is okay man, no prob at all and thanks

[UPDATE][OTA][ERROR][SOLVED] cm12 5.0.2

Most of the people on xda getting error while flashing new update on YU yureka.
so i have created this thread to solve there's problems :highfive:
you just have to follow some steps.
1.you should be on stock recovery.
if you do not have stock recovery then here is LINK
************************************************************
2. now you need big data pack you have to download whole updated stock rom which is approx 643.767 MB
here is LINK.
3. now put this in internal storege(not in any folder or ext_sd card)
4. go to recovery and apply update. and choose this zip file and flash it :good:
and now very important step. Hit thanks button :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
sunny765 said:
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
Click to expand...
Click to collapse
yes bro if you want update then you should be on stock if you have backup ur stock rom then just restore it.
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Rakesh251 said:
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Click to expand...
Click to collapse
have tried flishify app?
LINK
flash using this.
i have not tried yes but search.
Why is it 643 mb the update is just 130mb
thearjunraju said:
Why is it 643 mb the update is just 130mb
Click to expand...
Click to collapse
'cos it's the "whole updated stock rom", i.e., stock rom + the latest update rolled into one convenient easy-to-use package. read the op.
i was reading stock kernel was needed
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
oemaritradey said:
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
Click to expand...
Click to collapse
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
feeroz123 said:
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
Please flash any custom kernel to see if it works or not :3
oemaritradey said:
Please flash any custom kernel to see if it works or not :3
Click to expand...
Click to collapse
I am on thunderzap kernel
​enjoy happy flashing .
best of luck
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
LOL i tried falshing stock kernel with flashify both time i didnt get wifi signal(MAC UNKNOWN) xD Am not switching over to new update anytime soon....
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
feeroz123 said:
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
Click to expand...
Click to collapse
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
ashish_zarekar said:
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
Click to expand...
Click to collapse
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
feeroz123 said:
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
Click to expand...
Click to collapse
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
m_rajaganesh said:
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
Click to expand...
Click to collapse
DO NOT SPAM.
read carefully i already told the steps in my first POST
download stock kernel and flash it.
download stock recovery and flash it.
now download whole rom from my post and flash it.
ashish_zarekar said:
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Click to expand...
Click to collapse
I am sorry, I put it in wrong terms.
The CWM recovery (having basic look with text in blue that can be opted only using hardware buttons and not touch) is not shown for me now. The Cyanogen Recovery it shows me now looks new (with Apply Update option that can be opted by touch as well). THis new recovery fails whenever I try to flash any zip with it. The error being R/W error or something.
With the old recovery (CWM recovery) I could/did flash the Root.zip. After flashing this full ROM (having the patch), the old recovery is lost. It shows only the new recovery. And with it the Root.zip can not be flashed as it fails, as I mentioned earlier.
May be I will get you screenshots of the new Cyanogen recovery to explain what I mean.
Old CWM Recovery:
New Cyanogen Recovery:

[RECOVERY][UNOFFICIAL][G360T/G360T1] TeamWin Recovery Project (v3.0.0-0)

Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1). ​
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:​TWRP 3.0.0-0​
Bugs:
MTP may not work correctly.
SlimPickins will not flash. Recommended to flash using TWRP 2, make a backup of the System, then upgrade to TWRP 3.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Let me just steal this...
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
bogarty said:
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yes, but not without the help of @Y300-0100.
xRaZeR_FuZioNx said:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!​
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1). ​
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:​TWRP 3.0.0-0​
Bugs:
MTP may not work correctly.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Click to expand...
Click to collapse
YASSS!! TWRP 3 is out! Now at least recovery can look nicer and much improved now.
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Thank you for letting me know. I can confirm this issue appears at the "formatting system" step. I'll look into this issue and see what may be causing it.
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Y300-0100 said:
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Click to expand...
Click to collapse
I don't believe so, if you're referring to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
thisisapoorusernamechoice said:
I don't believe so, if you're conflict bing to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
Click to expand...
Click to collapse
So as I thought. Wipe system definitely working but there must be some conflict between updare binary and updater script with twrp since you restored system. First recovery wipe system and than restore it.
this conflict is common when rom is made with kitchen.
So wait for cm. It won't be to long
Y300-0100 said:
So wait for cm. It won't be to long
Click to expand...
Click to collapse
God I can't wait. I synced the repos but I can't seem to get it to build, no matter what I tinker with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Unfortunately, that was the case for me, too. I was able to wipe but not able to install the Slim Pickins ROM. It came up with an error. So I had to go back to TWRP 2.8.7.0 and successfully install the ROM.
Thanks
I've hung out in the irc almost every day and got to see this be made and released thanks all to who contributed to it now to make cm
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
X_shinobi.apk_X said:
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
Click to expand...
Click to collapse
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
X_shinobi.apk_X said:
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
Click to expand...
Click to collapse
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try using flash fire by chainfire if you still need to install twrp and can't use a PC. It's the successor to mobile Odin and is compatible with way more devices including virtually every Samsung device. Flashify might work too. Obviously either app will require root
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I think the "reboot to recovery" causing a recovery loop issue might be a system one. It's always been an issue on this device. There are quite a few versions of TWRP now for the SM-G360T1, but all if them do it. I think it even did it with the stock recovery too. Not a big deal though in my mind. Just have to remember to always reboot normal.

Categories

Resources