Related
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
funloft said:
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
Click to expand...
Click to collapse
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
sp flash tool error
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
funloft said:
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
Click to expand...
Click to collapse
can you access write memory section in your sp flash tool program?
huawei g610-u20 bootloop
George Jetson said:
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
Click to expand...
Click to collapse
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
sp flash tool error
George Jetson said:
can you access write memory section in your sp flash tool program?
Click to expand...
Click to collapse
yes, but it is asking me for raw data file....
funloft said:
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
Click to expand...
Click to collapse
Here is the link for stok rom u20
http://www.needrom.com/mobile/huawei-g610-u20/
huawei g610-u20 bootloop
the rom there is u20 with build B116, but the build for my phone is B121.... hope it will not affect?
huawei g610-u20 bootloop
please guys, help me out
FIXED
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
invalid IMEI
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Hello Friend
I was in error
nand flash not found
hellllllllllllllp me plzzz gays
need g610-u20 frimwaer for sp tool
bro plz give me a link for g610-u20 frimwaer for sp tool
lifegood8 said:
bro plz give me a link for g610-u20 frimwaer for sp tool
Click to expand...
Click to collapse
I can't post links yet, but you can Google it. Try typing "Huawei G610 U20 Needrom". You'll get links from Needrom.com, try look. Imgg for those. Once you're in the website, you'll most probably end up under G610's category. Try looking for the ones that say "official".
For you to extract the update.app file, try googling "Huawei Update.app extractor". The link you should look for should be from XDA Developers. You can then use it to extract the update.app file so that you can flash the .img files using SP Flashtool.
---------- Post added at 05:56 AM ---------- Previous post was at 05:50 AM ----------
funloft said:
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Click to expand...
Click to collapse
You can try using the Engineer Mode. Dial *#*#3646633#*#*, then swipe to the right until you're under "Connectivity" tab. Once you're there, go to "CDS Information".
funloft said:
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
Click to expand...
Click to collapse
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
ouro898 said:
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
Click to expand...
Click to collapse
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problemwhich i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
ouro898 said:
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
Click to expand...
Click to collapse
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
funloft said:
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
Click to expand...
Click to collapse
I was actually having problems making the sp flash tool work. It won't download after I plug the device to the computer. I'm doing the whole process correctly but I'm always getting an error. Then I found out that the mt65xx driver appears very briefly in Device Manager, then disappears. This all happens after about a second. Do you happen to know how to solve this?
Use mtk droid tools !!
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
RESTORE IMEI # USING THE NVRAM BACKUP !!! , in the MTK DROID TOOLS , COME OVER TO OUR THREAD FOR HUAWEI HONOR 3C
for more idea on restoring the nvram and IMEI which i accomplised
http://forum.xda-developers.com/newreply.php?do=postreply&t=2773098
Press Thanks !
Good morning everybody,
Yesterday I was trying to root my TS using the TrueSmart_Root_Tool_1.2.1 when I applied the root, recovery and patch my omate got stuck in Omates logo, after that I decided to flash it to the official firmware using SP flash tool, and following the guide [GUIDE] How to "UnBrick/Return to Stock" your Omate TrueSmart Watch x201, I clicked download and I got the error Enable DRAM failed (4032) so I selected firmware upgrade and managed to download the official firmware, after that my omate wont start. So I tried to flash it again, in order to find the right version for it. I tried in two different computers and in both have the same problem Enable DRAM failed (4032). Could you please help me to solve this DRAM problem? Any Ideas?
My omate is EU 2100 version and its official firmware was from may 2014.
luisgsaiz said:
Good morning everybody,
Yesterday I was trying to root my TS using the TrueSmart_Root_Tool_1.2.1 when I applied the root, recovery and patch my omate got stuck in Omates logo, after that I decided to flash it to the official firmware using SP flash tool, and following the guide [GUIDE] How to "UnBrick/Return to Stock" your Omate TrueSmart Watch x201, I clicked download and I got the error Enable DRAM failed (4032) so I selected firmware upgrade and managed to download the official firmware, after that my omate wont start. So I tried to flash it again, in order to find the right version for it. I tried in two different computers and in both have the same problem Enable DRAM failed (4032). Could you please help me to solve this DRAM problem? Any Ideas?
My omate is EU 2100 version and its official firmware was from may 2014.
Click to expand...
Click to collapse
Use this, and use the EMMC scatter.
Hi I have exactly same error message.
My TS is new one.
After flash with 20140328 firmware become like this coz. my ts was stack while booting when I try to rooted.
Any idea to resolve this problem.
Pls some one help.
Need more info about your unit.
Thank you for your reply.
my TS is 1/8/2100, firmware 20140513(when it's arrived)
Aluminum Version
Use this:
https://docs.google.com/file/d/0Bz7sBdJpIWEgbVhHczYtTkhVbG8/edit?usp=docslist_api
---------- Post added at 10:10 AM ---------- Previous post was at 10:10 AM ----------
And don't flash older firmware. I have firmware and tools in the development forum.
Thanks a lot I'll try with this
Hi
I try it but seems zip file is corrupted.
I can't extract any tools.
Seems system.img has crc error.
Would you kindly pls resend it to me?
I didn't send it. I'll get you another link.
Thanks again
Yes please!!!
Coz. you are the last hope.
Give this a go:
https://docs.google.com/file/d/0Bz7sBdJpIWEgbkNpbzFqdnpQODA/edit?usp=docslist_api
Make sure you use the emmc scatter.
Thank you for your quick reply.
Yes you means use emmc scatter in this zip right?
It should be in there, yes.
Hi
I got different message when I use this.
pls advice
Which scatter file did you select? I need the full file name.
I use this MT6572_Android_scatter_emmc.txt
Which is contained within zip file
Okay, we need to start over. You said you have an EU unit that had the 2100 firmware, right? Make sure you've selected format + download.
Yes exactly I have 1GB 8GB 2100MHz unit
I just select download so means should I select format all+download?
am I correct?
The PMT error happens when you flashed the wrong partition layout.
Select the emmc file, flash only the preloader. Let's avoid formatting for now.
kuronosan said:
I didn't send it. I'll get you another link.
Click to expand...
Click to collapse
kuronosan said:
The PMT error happens when you flashed the wrong partition layout.
Select the emmc file, flash only the preloader. Let's avoid formatting for now.
Click to expand...
Click to collapse
Great it's done.:good:
Thanks a lot seems progress.
So what is the next step?
Pls advice.
Any help will be appreciated, i have the HTC One Max 803s.
The device has no OS in it, only can access TWRP v2.7.0.0.
I've downloaded ROMs such as NuSenseSIX, PACT6, CandyKat T6, in this HTC one max forum .. . tried flashing through TWRP with no luck and an error message as below:
"Error executing updater binary in zip ..."
"Error flashing zip ...."
Is there anything else i've missed? What is the problem?
Thanks.
hpl912 said:
Any help will be appreciated, i have the HTC One Max 803s.
The device has no OS in it, only can access TWRP v2.7.0.0.
I've downloaded ROMs such as NuSenseSIX, PACT6, CandyKat T6, in this HTC one max forum .. . tried flashing through TWRP with no luck and an error message as below:
"Error executing updater binary in zip ..."
"Error flashing zip ...."
Is there anything else i've missed? What is the problem?
Thanks.
Click to expand...
Click to collapse
Use TWRP from here, and the try to flash a ROM.
bfisch3r said:
Use TWRP from here, and the try to flash a ROM.
Click to expand...
Click to collapse
Thanks, but looks like i can't flash the new recovery, it gives a message: Failed <remote:not allowed> :crying:
what's the issue now?
hpl912 said:
Thanks, but looks like i can't flash the new recovery, it gives a message: Failed <remote:not allowed> :crying:
what's the issue now?
Click to expand...
Click to collapse
Gonna take a wild guess your boot loader is locked.
Bootloader could be locked. Also, when you tried to change recovery, where you flashing via recovery or using ADB? You should be using ADB.
Solved. thanks guys for the advices, below is what was done:
- unlocked bootloader
- re-flashed new open recovery from the above suggested link
- flashed rom
I forgot to check the DA DL cheksum option while trying to flash a custom recovery. Now I am stuck with a boot loop having error message "Tool DL image fail". I have tried flashing the whole rom s226 but failed as I already updated to s227. Please help me out!!!
Hi, I noticed that the SP Flash tool version is very sensitive for flashing without errors.
I don't remember the exact version I used unfortunately, but it was the one from http://www.needrom.com/download/4-4-2-row-for-china-baseband-p780/ (you need to register and log in to view the download links, including the Flash tool).
You have to use version 3.X of the SP Tool (not 5.X), and with me, had same issue, but another minor minor version of the SP tool made all the difference. (I used 3.X.Y.Z and it was supposed to be 3.X.Y.A, where the letters are the numbers I forgot ).
I flashed 226 using SP Tools, with a version I still had on my PC. Got the "Tool DL image fail", even if I checked the DL checksum option.
Then flashed 226 with SP tool version of link, with checked the DL checksum option, and it worked.
Since I used the 226 version of the link, (ROW for CN models), it was rooted, and I then just upgraded to 227 through zip installation in recovery, and installed also the superuser.zip straight away to avoid loosing root. Worked out just fine.
Read the instructions on that link carefully, to make sure you have the correct model (ROW vs. CN) and manufacturing date (2013 vs. 2014) procedure.
casaben said:
Hi, I noticed that the SP Flash tool version is very sensitive for flashing without errors.
I don't remember the exact version I used unfortunately, but it was the one from http://www.needrom.com/download/4-4-2-row-for-china-baseband-p780/ (you need to register and log in to view the download links, including the Flash tool).
You have to use version 3.X of the SP Tool (not 5.X), and with me, had same issue, but another minor minor version of the SP tool made all the difference. (I used 3.X.Y.Z and it was supposed to be 3.X.Y.A, where the letters are the numbers I forgot ).
I flashed 226 using SP Tools, with a version I still had on my PC. Got the "Tool DL image fail", even if I checked the DL checksum option.
Then flashed 226 with SP tool version of link, with checked the DL checksum option, and it worked.
Since I used the 226 version of the link, (ROW for CN models), it was rooted, and I then just upgraded to 227 through zip installation in recovery, and installed also the superuser.zip straight away to avoid loosing root. Worked out just fine.
Read the instructions on that link carefully, to make sure you have the correct model (ROW vs. CN) and manufacturing date (2013 vs. 2014) procedure.
Click to expand...
Click to collapse
Look on my posts. You will find there the right flash tools.
Sent from my Lenovo P780 using XDA Free mobile app
Tool dl image fail
I tried to use android one tools kit for unlocking. When I clicked on unlock, it booted mobile, but again could not start. I used sp flash tool for flashing. When I clicked on download, all process completed but mobile could not start and displayed information "tool dl image fail". Please guide me how to resolve this.
Thanks
lenovoo.mobile2016 said:
I tried to use android one tools kit for unlocking. When I clicked on unlock, it booted mobile, but again could not start. I used sp flash tool for flashing. When I clicked on download, all process completed but mobile could not start and displayed information "tool dl image fail". Please guide me how to resolve this.
Thanks
Click to expand...
Click to collapse
Look on you phone box. See if there is writen something with 03.2014 or more date.
Or... Try to reflash with the new preloader. Before you try to flash press the small red button for 20 secconds.
Your preloader seems to be messed up right now.
Sent from my P780 using XDA-Developers mobile app
Manek88 said:
I forgot to check the DA DL cheksum option while trying to flash a custom recovery. Now I am stuck with a boot loop having error message "Tool DL image fail". I have tried flashing the whole rom s226 but failed as I already updated to s227. Please help me out!!!
Click to expand...
Click to collapse
Bro I am also having the same problem my phone displays tool do image fail and after some time it reboots again.and do this thing infinite times when I try to connect it to PC to flash a ROM it again reboots and resist the installing of any ROM.please helpp:crying::crying::crying:
[email protected] said:
Bro I am also having the same problem my phone displays tool do image fail and after some time it reboots again.and do this thing infinite times when I try to connect it to PC to flash a ROM it again reboots and resist the installing of any ROM.please helpp:crying::crying::crying:
Click to expand...
Click to collapse
Hi. Look what you have to do:
1. Prepare the phone for flash and plug the usb cable to pc and phone.
2. Open the back of your phone
3. There is a red button. Press this button for 20 secconds
4. While the button is still pressed, press on sp flash tool download or firmware upgrade button
5. After 20 secconds release the red button. Flashing should start.
6. Waiting for your feedback.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Look what you have to do:
1. Prepare the phone for flash and plug the usb cable to pc and phone.
2. Open the back of your phone
3. There is a red button. Press this button for 20 secconds
4. While the button is still pressed, press on sp flash tool download or firmware upgrade button
5. After 20 secconds release the red button. Flashing should start.
6. Waiting for your feedback.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Thanks bro my phone is now repaired successfully.it rebooted .this phone was with me from 1 year in this state .it was not booting up and also the repair center told that the problem is of ic.
But thankfully it is now ok .
I don't know how to thank you .:highfive:
[email protected] said:
Thanks bro my phone is now repaired successfully.it rebooted .this phone was with me from 1 year in this state .it was not booting up and also the repair center told that the problem is of ic.
But thankfully it is now ok .
I don't know how to thank you .:highfive:
Click to expand...
Click to collapse
An simple thanks is enough. [emoji1]
You are welcome.
Send from my Lenovo P1 Vibe Pro
Can u please tell me that why when I try to flash ROM [Android m preview] the TWRP recovery says "error executing updater script in android m .zip".and the installation is aborted.
And when I try to reboot device it says "device is not rooted ",but I had rooted it.each time I install the ROM the same thing happens. Please help me I am in a big fix.
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Can u please tell me that why when I try to flash ROM [Android m preview] the TWRP recovery says "error executing updater script in android m .zip".and the installation is aborted.
And when I try to reboot device it says "device is not rooted ",but I had rooted it.each time I install the ROM the same thing happens. Please help me I am in a big fix.
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Hi.
Can you tell me what version of TWRP do you use and what firmware do you have right now?
If you have Jellybean firmware you must update to Kitkat.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi.
Can you tell me what version of TWRP do you use and what firmware do you have right now?
If you have Jellybean firmware you must update to Kitkat.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Actually I have formatted the system,but before that I was having stock KitKat.
And I have TWRP v2.7.1.1 compiled by javum
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Actually I have formatted the system,but before that I was having stock KitKat.
And I have TWRP v2.7.1.1 compiled by javum
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Soo many flash in one place...
Send from my Lenovo P1 Vibe Pro
stympy said:
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Ok thanks.
Sent from my Lenovo P1 using XDA Labs
stympy said:
Ok. Go to q&a section/rooting tutorial for kitkat and download latest TWRP. Flash from TWRP and try to flash again.
Soo many flash in one place...
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I did as directed by u but still encountered the same problem,
I tried MIUI ROM this it said :-
"Failed to copy dir system to /system
Error executing updater script from ......zip
Install aborted"
What to do now
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
I did as directed by u but still encountered the same problem,
I tried MIUI ROM this it said :-
"Failed to copy dir system to /system
Error executing updater script from ......zip
Install aborted"
What to do now
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Hi. Try this:
1. Go to wipe/advance wipe.
2. Select all except micro sd card and otg
3. Swipe to wipe
4. Go to reboot and reboot to recovery
5. Go again to wipe and wipe to factory defaults
6. Now go to install and try to install again.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
stympy said:
Hi. Try this:
1. Go to wipe/advance wipe.
2. Select all except micro sd card and otg
3. Swipe to wipe
4. Go to reboot and reboot to recovery
5. Go again to wipe and wipe to factory defaults
6. Now go to install and try to install again.
7. Good luck.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
Again the same error.
Also when I try to reboot system or reboot recovery it says "swipe to install SuperSU" and asks this each time I try to reboot
I think my phone is not able to mount system.its just my thinking
Sent from my Lenovo P1 using XDA Labs
[email protected] said:
Again the same error.
Also when I try to reboot system or reboot recovery it says "swipe to install SuperSU" and asks this each time I try to reboot
Sent from my Lenovo P1 using XDA Labs
Click to expand...
Click to collapse
Did you tried another firmware?
Maybe this one is corrupted.
Send from my Lenovo P1 Vibe Pro
stympy said:
Did you tried another firmware?
Maybe this one is corrupted.
Send from my Lenovo P1 Vibe Pro
Click to expand...
Click to collapse
I tried 2 firmware but same error.
But I installed firmware successfully
I did this:-
1. Wiped everything except sd card .
2. Mount system
3. Go to install
4. Tried to install firmware
5. Got the error,rebooted system
6. Switched phone off from red button
7. Go to recovery
8. Mount system
9. Tried to install ROM,got error
10. Wiped dalvik cache and data
11.again installed ROM
12. Got successfully installed this time.
Sent from my Lenovo P1 using XDA Labs
Hi guys Need a help with flashing my mobile.currently using miui v.6.1.21 row 8gb I need to flash my lenovo p780 to stock since I decided to sell it.I tried to flash the KitKat version(s228) with sp flash tool version(3.13040.0.119) but after I loaded the scatter file and hit the firmware upgrade button and connect my phone the progress bar just jumps to 100% red line in the baground of progress bar and just keeps running waited half an hour nothing happens,the timer just kept running.tried with stock version s119 and s124 same results.so I downloaded the latest flash tool that is sp flash tool version(5.152.4) opened the tool and loaded the scatter file but the preload was empty I manually loaded the correct preload after pressing download the tool gave a error "unrecognized ROM detected" have no idea what to do. PLEASE HELP.
@stympy hey bro I private messaged you yesterday BTW yes I tried the flash tool version 5 (5.152.4)
vinay.dk said:
@stympy hey bro I private messaged you yesterday BTW yes I tried the flash tool version 5 (5.152.4)
Click to expand...
Click to collapse
And nothing? Is still not working?
stympy said:
And nothing? Is still not working?
Click to expand...
Click to collapse
As I said got error "unrecognized ROM detected"
Do you think this will work ?http://m.youtube.com/watch?v=v02G0SCsR30
The solution that I've found works well in this situation is format all except bootloader in SP Flash Tools and then disconnect phone, select Download option (not Firmware Upgrade) and reconnect phone)