Hi folks,
Has anyone noticed at the bottom right hand corner of their device, by the speaker grille the screen is lifting slighty?
I've only just noticed it today, I've had it submerged in water this morning, there are no air bubbles coming from the area neither has the device stopped responding so I assume it's still water tight.
Cheers.
SWFlyerUK said:
Hi folks,
Has anyone noticed at the bottom right hand corner of their device, by the speaker grille the screen is lifting slighty?
I've only just noticed it today, I've had it submerged in water this morning, there are no air bubbles coming from the area neither has the device stopped responding so I assume it's still water tight.
Cheers.
Click to expand...
Click to collapse
I noticed that that corner can be pushed down a very little bit, but - at least to me - it doesn't look lifted
Related
Had my SG2 for a couple of days and I noticed a gap on front, top and bottom which makes it look very cheap. The case surround is slightly too big at the top and bottom yet the sides are sealed.
I don't have a camera just now so can't take pictures of it but will try to get some soon.
Anyone else noticed it or maybe it's a manufacturing defect with my phone?
Yes search its been posted here .
jje
yep and annoying thing is that dust and particles gut stuck!
Noticed this on my GS2 also. Is it normal for there to be a gap? It's attracting quite a bit of dust.
akivlin said:
Had my SG2 for a couple of days and I noticed a gap on front, top and bottom which makes it look very cheap. The case surround is slightly too big at the top and bottom yet the sides are sealed.
I don't have a camera just now so can't take pictures of it but will try to get some soon.
Anyone else noticed it or maybe it's a manufacturing defect with my phone?
Click to expand...
Click to collapse
Sides are sealed?
My sides have the gap too?? Or what do you mean?
Just got my second hand S3 today, just checked it over and noticed there is a crack in the rear white casing next to the camera, it's basically on the bottom right corner of the bevel around the camera area around 2mm in size. Anyone else had this?
The device has had a qubits rear cover on similar to this, i'm wondering if it might have put some pressure on that area
http://www.mobilephonecomparisons.n...-of-the-qubits-accessories-range_9215_220.jpg
Any thoughts?
Ok so I was wondering if any one knows what this is. My dinc 2 screen will pretty much resist face oil and finger prints alright on the top half of my screen. But the bottom lower half gets extreamely smudgy. I can rub it across my face and I can see the the halves clearly. Not sure if some coating got taken off or what what it's really anoying. I've used all maner of screen cleaner on it and it wont fix the problem. thoughts?
The bottom half might have worn off due to higher usage of the bottom half, keyboard etc.
Just a thought
so i had my phone face down on a clean school desk
i picked it up carefully and vertically (so the screen doesnt rub against the desk)
ans surprise! there are tiny scratches on the right and left side of the display
is this normal?
The other day, i had my phone face down on my backpack literally 4 inches above concrete. One slow fall later, i flip it over and there's one long horizontal crack across the glass. I think i'm going to get a shop to put a white screen on it now.
The outside bezel of the glass has a small ridge in it that elevates it VERY slightly when it is put face down without a case, so the edge of the front face is very prone to scratches. Mine seems to hold up pretty well. I have dropped it more times than any other phone I've ever had, and the only visible damage I have is a small chip about 1/2 a millimeter on the top left corner. It's small enough that my case covers it up.
Sent from my CarbonROM 4.3'd HTC DNA
the scratches are not visible by any means. but the fact that just by putting it face down scratches the screen is kind of disheartening.
anyways. if it gets any worse, i might just get a replacement screen.
Get the xtreme guard screen protector. Super cheap and lasts a long time
Sent from my HTC6435LVW using xda app-developers app
Mine fell out of my jacket pocket about 2' onto tile at a store when I was reaching down to pick something up it slipped out and landed flat on the screen, no damage except for a few minor scratches that are only visable when the light hits it just right. Forgot to mention that I did not have a case or any kind of screen protector on it.
When I have my phone flat on my desk (camera side down), I noticed it's not sturdy, the bottom left corner skid pad is off-kilter. It's not balanced like the other 3 corners and wobbles. Anyone else or is it just my phone?
Mine is just fine
Happened also with mine using Spigen SlimArmor....
Further digging, seems that the phone slightly bent (mine dropped on concrete few months ago)...
But after re-bent it, its OK now...
When I put it flat (screen on bottom) on the glass table without case, its completely flat, unlike before...
Now the wobble is gone.....
Crescendo Xenomorph said:
Happened also with mine using Spigen SlimArmor....
Further digging, seems that the phone slightly bent (mine dropped on concrete few months ago)...
But after re-bent it, its OK now...
When I put it flat (screen on bottom) on the glass table without case, its completely flat, unlike before...
Now the wobble is gone.....
Click to expand...
Click to collapse
I just bought this phone used from Swappa a few weeks ago. Same thing probably happened to my phone. How did you bend it back?
I've had my Note 3 in a UAG case for a year and never noticed, but I have the exact same problem...bottom left corner can be tapped down very slightly and the other three corners are solid.
What's weird is that the wobble goes away if I move the phone to other parts of the table or rotate it. It either wobbles on the bottom left or doesn't wobble at all. Neither phone (glass down) nor case wobble on their own. Only when put together and in that one corner.
---------- Post added at 10:28 PM ---------- Previous post was at 10:13 PM ----------
Played with it some more and it seems like there must be *some* amount of bend given the way the phone moves and spins when glass down out of the case. Should also add that I've got tempered glass on the front, which could be invalidating the glass down test anyway.
I have a black and the slate UAG and both are good. No movement whatsoever.
norml said:
I just bought this phone used from Swappa a few weeks ago. Same thing probably happened to my phone. How did you bend it back?
Click to expand...
Click to collapse
I just bend it with my hand carefully, then check it if its already flat. Repeat if still not, put slightly more force.
Remember just don't over-force. You don't wanna crack the screen.
Same on my new case installed 2 days ago.
Phone is NOT bend.
Yeah, I'm guessing this has got more to do with a slight difference in the effective height of the bottom/right (pen corner) "foot" than anything else. Perhaps it's not quite level with the other three or the case flexes enough around the pen gap to cause the wobble?
No issues with mine and I've had my Note 3 in a UAG case for almost a year now
Note 3 in UAG (white) fits perfect. Love the setup. Had the UAG on my S3 also. Combined with Tech Armor's Ballistic glass screen covers....been hooked ever since.
Same problem here, left bottom corner is a little short. You can see it clearly when you try to press the left bottom corner, the phone wobbles.
Other people got that problem or it's a detect of a few series ?
UAG Scout for Note 3
Mine does not wobble. I am using black (scout) case with my Note 3. This Note reviewer is using the same setup.