I don't think my x10 mini was brick.I'v unlock BL.flash lastest nAn with flashtool,install xperianz rom and got bootloop.after that.I roll back to stock kernel and flash stock firmware(ftf file) with flash tool and no luck,black and blank screen bootloop
I'v try all rom in developer thread and still got bootloop with nAn kernel logo.with miniCM9 got status 0 after install complete,My X10 mini can get in to flash mode and recovery mode normaly
any help?
anyone knows?
Related
Hey,
Have an x17i mini pro with ana's cm7 mod installed, worked great for a month or so, but today the wifi doesnt work...
any ideas how to fix?
got it
Hey,
Dont know what happened but i had done a cwn based backup in Jan so restored to then, lost some data- messages ect, but wifi is back
I´ve tryed this too and it worked. But by the days this issue came again. I also tryed to reinstall rom and kernel but i wasn´t succesfull I moved to Hybrom
how did you go from naa to hybrom?
i tried the rom on naa kernel but it just rebooted after...
trying to load another kernel, but cant get me device in fastboot mode to load a boot.img, can only enter flash mode and flash a *.ftf file, any ideas?
opps, its a u20i
hi i have bricked my ray. I got the ics update from seus the other day and rooted it and tried to flash a status bar mod via cwm and the status bar vanished so i went to restore my backup and i clicked my old gb backup instead of my ics backup by mistake and now it wont boot up it just stays at se logo. I tried flashing gb with flash tool still no luck then tried flashing free xperia unbrick ftf first then reflash gb still no luck. Flash to finishes flashing but at the reboot stage at the end the phone just doesnt boot past the se logo but pc companian picks up that a phone is atached. Please someone help me im beging u.
Hi there!
Do you have flashed GB Kernel fitting your GB Rom of the Backup you have restored?? You need the fitting kernel.
Download Fastboot oder Flashtool, get the kernel img an flash it to your phone.
Bye an good luck!
What ROM do you have installed then currently?
Install the proper kernel also according to this.
Full stock .ftf firmware files should also include kernel.
yea the firmware's iv been flashing have the kernel in them. I think i damaged the bootloader coz al the flashing was succesfull but the ray just wunt boot into android so damaged bootloader. Anyway i gave up and its in for repair lol.
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
Maybe you got your kernel and rom from the wrong place. If you have an X10MiniPro make sure you get kernel and rom from the x10minipro section too, and not from the x10mini section. Although the phones seem similar apart from the keyboard, they do have a different digitizer too.
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
On which kernel are you now? If you're on a JB kernel, make a full wipe ( data,cache,dalvik-cache,system), install a GB Kernel and then install GDX. If you're on a GB kernel, also make a full wipe and then install GDX. Of course, make sure youre using the right ROM and kernel for your device.
Please press thanks if I helped .
I have flashed the JB-Port from the XGO on my Xperia U.
It works all ok and then i wanted to go to the recovery menu to recover an old backup, but it stucks in the "Kernel Screen".
I flashed another kernel (phantom stock jb kernel) via fastboot to solve the problem , but then i couldn't go the recovery, too.
any helpful tips how i can get into the recovery to recover a backup?
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: