Related
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Yes sir, the case was designed that way. Returned mine for that reason.
#Winning# said:
Yes sir, the case was designed that way. Returned mine for that reason.
Click to expand...
Click to collapse
What a stunningly foolish design. All the had to do was glue $0.005 worth of thin fabric between the plastic (doesn't matter since the LCD isn't there) and that would protect the entire front, plus the speaker.
I'm thinking of getting some really light fabric, coating it with silicone, and pressing it in place. Shouldn't affect speaker quality, silicone is soft so no chance of glass damage, and it would essentially waterproof (to a degree of course) the entire front.
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
kellybrf said:
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
Click to expand...
Click to collapse
siraloz said:
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
Click to expand...
Click to collapse
Hmm...are you sure you're not talking about the Commuter?
Could be worst....the guys over in the sensation forum are crying because otterbox isnt making them a case lol
Sent from my PG86100 using XDA App
ffolkes said:
Hmm...are you sure you're not talking about the Commuter?
Click to expand...
Click to collapse
That would be why he replied to someone elses post about the Commuter
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Couldn't agree more. I see this as a huge design mistake.
I saw this too, but I really did not think much of it. I guess there is no such thing as a perfect case.
Sent in 3D using my EVO.
Put a full screen protector on it before case and its fine love mine no issues love it no dust issues.
That's the way the case was made no issues.
nebenezer said:
Couldn't agree more. I see this as a huge design mistake.
Click to expand...
Click to collapse
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
ffolkes said:
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
Click to expand...
Click to collapse
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
reaper24 said:
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
Click to expand...
Click to collapse
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
ffolkes said:
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
Click to expand...
Click to collapse
Hope it works out for u man. I liked the feel of the otter box more then the seidio convert re branded heard some bad things about how flimsy it was checked it out at best buy didn't really seem as sexy as defender . I think ballistic would be good just that thing is a freaking tank. hope u have good luck with finding a case man.
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
The Dark Knight Patriot said:
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150623970249&ssPageName=ADME:X:RTQ:US:1123 put this on before the case and ur good to go no dust works great for me in the garage where I work on the shop floor mechanic
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
nonpointtruth said:
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
LOL if u use zagg don't put to much solution on the protector or u will get water damage on the screen don't know hoe well these screens are sealed og EVO had ****ty glass sealing the screen was never glued all the way around .
Well the title pretty much says it all, just a basic thread asking some basic questions.
1) Do you use a case?
- If so which one?
- how do you like it?
- are you considering something else?/ If so which one? and why?
- Does it make the phone feel bulky?
2) Do you use a screen protector
-if so which one?
-how do you like it?
-are you considering something else?/ If so which one? and why?
-If you do not use a screen protector have you had any issues with scratches?
andybones said:
Well the title pretty much says it all, just a basic thread asking some basic questions.
1) Do you use a case?
- If so which one?
- how do you like it?
- are you considering something else?/ If so which one? and why?
- Does it make the phone feel bulky?
2) Do you use a screen protector
-if so which one?
-how do you like it?
-are you considering something else?/ If so which one? and why?
-If you do not use a screen protector have you had any issues with scratches?
Click to expand...
Click to collapse
1. Yep. Right now I have a TPU case but I'm looking at an Otterbox or something similar. Need to protect it better from work.
2. Oh heck yes. Despite being Gorilla Glass screen scratches still happen. I currently use a Zagg invisibleSHIELD. They have a life time guarantee and mild scratches tend to heal so you no longer see them. I won't be switching to another screen protector because these work so well.
1) Yes.
Had this one: Transparent Clear Protector Case Phone Cover For Verizon HTC DROID Incredible 4G LTE. Fit well, appeared to be good quality, but was bulky and slippery.
Switched to this one: Fosmon S-Curve Soft Shell TPU Case for HTC DROID Incredible 4G LTE - Black Like it much better. Fits well, Not at all bulky or slippery.
2) Also Yes
Have this one: GreatShield Ultra Smooth Clear Screen Protector. Very clear, but super fingerprinty. Will likely switch to something matte someday
I am currently using a TPU case, but I am waiting for Seidio to announce their surface case/belt clip combo for this phone; I've use the Seidio surface with all my previous phones.
I used to use a screen protector but stopped about a year ago.
i use the Trident Aegis case.
so far, I love it.
http://www.tridentcase.com/shop-products/htc-fireball-adr6410l/aegis-case-htc-fireball-adr6410l.aspx
Come with the screen protector that is pretty good quality. It is less bulky than the Ballistic case (which i also have).
Issues with the Trident are the headphone jack cutout is not wide enough in the direct of the front of the phone, needs to be filed out a bit and it's fine. The hard portion of the case is a little slippery, the guitar pick shaped area in the back is for the silicon to come through and give you non-slip when laying it on its back, this guitar pick area could be a little bigger or the hard part a less slippery material.
The colors don't seem to be quite as vivid as they look on the site, i got the blue, instead of being as bright as it is on the site, its more muted of a blue which is still nice, but not as nice.
The size to protection ration is perfect for me though. I wouldnt be afraid to drop it but can still use it as my everyday case. Also the silicon is a dust resistant one, Lint comes off very easy.
I was not happy with the ballistic due to its size and the silicon on it is a lint magnet. The ballistic corners on it while nice for grip, make getting it in/out of a pocket a pain. The hard shell on the ballistic has a much nicer feel though and is not slippery. The ballistic also does not come with a screen protector.
awesome, thanks for the answers guys!
guys it's my turn!
1) I use TPU black case from Verizon only when going on and I think I may need the extra protection.
I really like the fit of the TPU case it fits very snug, and the cut-outs for the power and the volume buttons make it a perfectly made cse + cheap. :good:
2) Un-characteristuic of me, but YES, I currently do have one on, my dad got the phone the same day and got a package, so I tossed one on.
but I took it off tonight.
don't need it TBH.
gorilla glass will scratch yes, but I'm very OCD lol.
I'm using the Incipio Feather, very nice on this phone. Seems better quality than the one I had on my Inc2.
Using some Verizon screen protectors because they were 10 bucks. Not too bad but they have camera and proximity sensor cutouts which I don't like, so I'll find some that cover the entire front.
Actually saw a very small scratch in the top right corner of the screen the first few days - decided it was worth peice of mind to spend $10 on a screen protector rather than find out gorrilla glass could scratch somewhere more irritating later. Picked up the verizon screen covers and the one on there seems to be holding up against scratches too. They don't cover the sensors/cam spots on the front as mentioned above but since those are over black areas scratches may not too bad (??)
I also tend to drop my phone every once in a while so I grabbed a cheap black/white TPU case off amazon (I think it was $15 with shipping) but the cut outs are too narrow and the volume rocker is really hard to push to activate. I'm waiting on Seidio to release an active case option and if they don't (or its not what I'm looking for) I'll probably go to incipio duo pro sycrillic's line.
I've just order the S-Curve TPU case and the Cruzerlite Androidified TPU case. Gotta see which one feels/fits better. Since the Inc4G isn't as wide as my Inc2, I think the added bulk won't be a problem. One question I have is about the TPU material sliding in and out of jeans pockets. Does it get stuck and pick up lint like the silicon case or is it fairly slick? Is it gonna be a battle royal every time I want to pull this thing out of my pocket?
Pandalero said:
I've just order the S-Curve TPU case and the Cruzerlite Androidified TPU case. Gotta see which one feels/fits better. Since the Inc4G isn't as wide as my Inc2, I think the added bulk won't be a problem. One question I have is about the TPU material sliding in and out of jeans pockets. Does it get stuck and pick up lint like the silicon case or is it fairly slick? Is it gonna be a battle royal every time I want to pull this thing out of my pocket?
Click to expand...
Click to collapse
I got the cruzerlite case and it is quite nice feeling. It has a mostly matte back and ribbed sides (bumpy).
It is easy to take out of pocket.
Sent from my ADR6410LVW using Tapatalk 2
I just ordered a black TPU cruzerlite Androidified case and a ZAGG screen protector. Been going naked too long. Sooner or later my luck is going to run out.
Sent from my ADR6410LVW using xda premium
edster00 said:
I am currently using a TPU case, but I am waiting for Seidio to announce their surface case/belt clip combo for this phone; I've use the Seidio surface with all my previous phones.
I used to use a screen protector but stopped about a year ago.
Click to expand...
Click to collapse
I've been liking my cheap TPU case, but completely agree about a Seidio case. I had one on my OG Droid and loved it... until it broke. Went case free after that.
Sent from my Fireball using Xparent Blue Tapatalk 2
No case yet but I do have an anti glare screen protector that also doenst really pick up fingerprints. I had an otterbox for my inc2 but stopped using it after a week or so. I'm not terribly rough on it at work and that made it way to big. I usually keep it in my pocket but will probably get one of those seido case/clip combo thing eventually
Sent from my ADR6410LVW using xda app-developers app
I read one account of a user having issues with a Surface case and a tempered glass screen protector. Anybody using that combo and is it working ok?
hawkeye680 said:
I read one account of a user having issues with a Surface case and a tempered glass screen protector. Anybody using that combo and is it working ok?
Click to expand...
Click to collapse
Bumping one more time because they are on sale today. Will it work ok with a TG screen protector?
http://www.shopandroid.com/seidio-surface-case-with-kickstand/4A123A15688.htm
Sorry I can't help you with your question. But that's a good price for the case just can't believe they don't do it in white. Thanks for the link
Sent from my GT-N7105 using xda app-developers app
Hope someone chimes in as well, that's a good price.
Sent from my SM-N900T using Tapatalk
Well don't know if this helps but my last experience with seido surface for the GS4 was pretty bad after a month use the rubberized paint on it started wearing off and Seido refused to do anything about it. I used to always get their holsters for my HTC phones and had no issues. 1st case I had an issue with they refused to do anything about it and I paid $50 direct from seido also. I would not buy another seido product. But that's just me. The price is nice though I just would not expect it to last more than a month without the finish pealing off.
I read here that it wouldn't work with a TG unless it was a really thin TG. Not sure if true or not.
I was the user that had the issue. I do not recommend it. I had the SPIGEN GLAS.tr. It pushed the screen protector down almost making a cracking sound, to which i saw air bubbles form. The bubbles went away after I put it on with a decent amount of force. This stupid case is not meant to work with a good screen protector because it hugs the phone too tight. I guess that was the purpose of their design. The biggest issue was taking it off. People without screen protectors on Amazon complain about how hard it is to take off without a screen protector. Now, with one, it's IMPOSSIBLE. I cannot explain to you enough how IMPOSSIBLE it is (NOTE: I'm a strong enough guy 180 lbs 6 feet tall athletic build. I open and lift things easily without issue when it comes to impossible soda bottles or things that get stuck in the house). I ruined my silver bezel edge with a tiny scuff due to this stupid case as I tried for 30 minutes to get it off. It just would not come off. So I was like screw it. I ended up just pulling the area where both pieces connect and yanking it to the side while digging (damaging my nail) to have them disconnect and send the bottom piece flying. Luckily, there was no damage to the case so I was able to get my money back and full refund on Amazon. However, the silver plastic top bezel had a tiny scuff, which really annoyed me because I'm OCD like that and keep my phones and other tech flawless with protective cases/screen protectors; I keep my items in NEW/MINT condition if I ever want to sell something. Also, I don't mind buying the casing to replace the bezel, which I did for my Note 2 when it fell on concrete with a case that did not protect the top or bottom (like SPIGEN Ultra-fit). However, with the Note 3, they have the Silver Plastic glued to the screen LCD portion instead of the backside like the Note 2. So that means instead of 15 bucks you have to spend $200+ to replace it. NOT WORTH IT.
This was just way too difficult. Save yourself the trouble if you really want to protect your phone and your screen. You're better off with a UAG or something similar. I use the SPIGEN Bounce and it works very well with the GLAS.tr.
@opasha Do you have the holster for the Surface case, and do you have any other cases? I'm curious how well other cases fit in both the Surface holster and Dilex holster. Can't decide if I'm gonna buy one of those holsters, or the holster for the naked phone.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
stanglifemike said:
@opasha Do you have the holster for the Surface case, and do you have any other cases? I'm curious how well other cases fit in both the Surface holster and Dilex holster. Can't decide if I'm gonna buy one of those holsters, or the holster for the naked phone.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Sorry bro, I never really use holsters. My dad does. He has a UAG case for his S3 and the DILEX and SURFACE were too small. However, the CONVERT holster fit perfect for him. I have a BOUNCE case and I'm sure the DILEX holster would work for that. I'm pretty sure for anything to fit in a SURFACE holster, you would need to have a very bare minimum case like SPIGEN ULTRA-FIT or something along those lines...if that.
opasha said:
Sorry bro, I never really use holsters. My dad does. He has a UAG case for his S3 and the DILEX and SURFACE were too small. However, the CONVERT holster fit perfect for him. I have a BOUNCE case and I'm sure the DILEX holster would work for that. I'm pretty sure for anything to fit in a SURFACE holster, you would need to have a very bare minimum case like SPIGEN ULTRA-FIT or something along those lines...if that.
Click to expand...
Click to collapse
That's cool, I appreciate it anyway! I thought I'd read before that the Bounce case fit in the Surface holster, but want to be sure before I make the purchase. I would imagine it will, as the Bounce and Surface cases are pretty similar in size. I'm afraid that the Dilex holster will be too big, and not hold the Bounce(or a similar sized TPU case) very tight.
Sent from my White Note 3 via TapaTalk
stanglifemike said:
That's cool, I appreciate it anyway! I thought I'd read before that the Bounce case fit in the Surface holster, but want to be sure before I make the purchase. I would imagine it will, as the Bounce and Surface cases are pretty similar in size. I'm afraid that the Dilex holster will be too big, and not hold the Bounce(or a similar sized TPU case) very tight.
Sent from my White Note 3 via TapaTalk
Click to expand...
Click to collapse
Yeah, I feel you. The Bounce does feel very similar if not a little thinner than the Surface. It actually might fit.
Got my Surface today! I love it. It's exactly what I hoped. The only problem, which is a big one by the way, it's not compatible with my 9H Iloome. The protector started to bubble on one of the corners. It was so tight that I wasn't sure that I could get it on and it also wouldn't snap closed. If you take the battery cover off, it fits just fine. But I'm not sure that I want to use it like that. I may buy a thinner TG screen protector, like the iloome flex, but I'd hate to throw away the $25 that I spent on the 9H.
So we all like our protective cases... and I agree I think for the average person some type of tpu case or any case that provides some drop security is good. Your basically just looking to save the body of the phone... which i would think could be achieved pretty easily without getting the bigger bulky cases.. like UAG.. Otterbox etc.. if your working 20 feet up i'd say go for it.. otherwise.. why? wouldn't say a slim armor.. or just a slimmer designed case that has a better fit in your pocket do the deed just as well from a normal head to ground drop? I wouldn't think a slimmer case could achieve this easily (I'm not saying i'm right)...
Now for the part we all love.. the screen... so many people get cases.... practically everyone.. but most people tend to not guard the screen the way we should.. I personally believe this is where the money should be spent.. getting a good iloome glass protector or another alternative that will seriously protect the screen from a head drop to concrete etc... at least up your chances substantially from the screen being destroyed....
That is my amateur stance.... now this is why i start the thread.. because the UAG looks nice and very protective... but it adds (excessive?) bulk? couldn't a slim armor or another choice (place good slim protective case here please lol) and as far as my eye can see you can get the iloome flex for a great price.. which i think is a must.. not necessarily the brand but the protector.... so maybe someone can throw something in on a case to save from drops that is quality but slim... and hopefully this thread reminds someone to get a screen protector..... I'm just wondering if these cases are a bit of overkill considering the amount of bulk... and rather if a smaller footprint could basically acheive the same protection from. your normal 7 foot and down worst case scenario... thoughts? advice?
On my razrHD I used an Otterbox defender. So i've been looking around for something similar. But as the N3 already is a huge device to fit in your pocket, i wanted something more slim. The spigen neo wasn't available so I settled for the spigen bounce. I also added a screen protector film. Actually, if your phone drops, I doubt that any screen protector will help much. For me, the screen protector is more for little scratches you get when putting the device into your pocket, bag, or whatever else.
From my expirience, I really loved the silicone of my Otterbox. I could almost put my hand more than 45degrees without the phone slipping from my flat hand. I don't dare doing this with the spigen bounces TPU. Compared to the Otterbox, it's almost slippery.
But the Otterbox made the phone also even heavier than it was already. So i have plenty of reasons not to get a tough case. Instead I ordered a bamboo aluminum bumper. I love the looks,, I think it wont't add much weight and bulk and the back of the phone offers more grip than the spigens TPU and it's also replaceable which wasn't the case on my razr HD. Actually, the only one time I dropped my razr HD was when I was at home and had taken it out of its case to admire the slimness of the phone. Bummer. And I immediately had a scratch on one corner of the kevlar back.
So to sum it up, I plan on using a bumper because the sides of the phone cannot be replaced but the back of the N3 can. The screen won't make a difference with or without protector in my opinion, so I think it's more of a preference thing. I like the thought that I can just peel off the layer of plastic in case of minor scratches. The only last concern I have with my bumper is, that the "housing" of the camera seems to be aluminum which could get scratched because the phone will rest on the housings edge when laid down. The lens won't be affected because it will be angled to any flat surface, and I don't plan on laying my new toy on rough concrete or similar.
Wow. What a long post. But from reading the OP-post, I think it's all about sharing ones thoughts and experience so others can build on it. I hope you didn't mind reading all this.
Thanks but I think your getting screen protectors mixed up from the plastic junk ones two the glass ones that can save a screen... check out YouTube tests on tech 21 or iloome
Sent from my SM-N900V using Tapatalk
loopers said:
Thanks but I think your getting screen protectors mixed up from the plastic junk ones two the glass ones that can save a screen... check out YouTube tests on tech 21 or iloome
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Possibly true, but there'll always be that one little sharp edge the screen drops on so that it gets shattered. And with a screen this big, the likelyhood it's falling "butterside down" is pretty high. Anyway, I'm ok with my screenprotector like it is and I try to be careful not to drop my phone
The most drops I heard of so far was with people who used pouches. The pouch protects as long as the phone is in, but it usually drops down when exerted from the pouch. So I think it may be the same with any other case. Like it was with my razr HD. i never dropped it while it was in the Otterbox. Just the only one time I wanted to use it without my Otterbox.
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Kawaisa said:
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Click to expand...
Click to collapse
Thanks. Probably go with the uag sadly.. it seems the best all around case though sadly has designer flaws
Sent from my SM-N900V using Tapatalk
loopers said:
Thanks. Probably go with the uag sadly.. it seems the best all around case though sadly has designer flaws
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
From all my research it seems the best protection for the Note 3 is:
MIME Feather Glass protector
+
Polycarbonate Bumper.
What...Why?!?!
Well, first of all the Note 3 has a more sensitive active digitizer and I think the capacitive sensor's been bumped up a notch.
What that means is you can use screen protectors made of glass to give the screen the extra protection it needs.
These are usually VERY protective, and if given the right conditions should last the length of the phone's lifetime (usually 2 years).
The MIME Feather is the THINNEST glass protector available, sitting at 0.15mm its not that much thicker than plastic screen protectors.
Being the thinnest it should be the weakest of the glass protectors, but like I said since glass protectors are REALLY protective it will be more than enough.
And another point to make, this uses the best materials and machining available. Its just a step up, technologically wise, than the cheap 3mm ones.
So it can actually take a beating as much as those cheap 3.3mm glass protectors (which also tank hits, and brush off scratches as nothing).
For $32... its an expensive investment, but being a one off, its probably worth it.
Bumpers.
Is it weird that the Antenna-gate scandal left us with something genius?
Having a bumper which is scratch resistant, shock proof, temperature proof, and just hands down awesome is just... awesome.
I personally don't like bumpers because I feel like they don't protect the phone's front and back-- the truth is they do.
Having a bumper which sits mostly flush on the sides ...BUT protrudes out from the front and rear angles of the phone is magic.
It means dropping the phone will ALWAYS land on the bumper, and shock absorbed, dint free, scratch prevented.
And bumping your phone will ALMOST always ding the bumper.
What this means is a good, high quality bumper can put less "FAT" on your device and still provide the same protection.
I'm all for efficiency.
And why polycarbonate/VaporMG and not Aluminium or Metal?
It doesn't matter what type of metal you have, surrounding the perimeter of the device creates some sort of "force field" a phenomenon known as Faraday Cage.
An expensive metal bumper made by a reputable company will drop ~1 bar of signal, I'm not sure if NFC and Bluetooth are affected. On top of this, not all metals are the same.
Some are poor shock conductors, and won't really protect your phone.
While TPU can get the job done, its not 100% environment/weather proof. Something like a high quality Polycarbonate (think Nikkon DSLR camera housing) will last longer than your device's lifetime, feel great/grippy, and be as protective. Leather isn't a good choice here simply because its not very sturdy (when its just a thin bumper) and won't be able to absorb as much force as these plastics and amorphous metals. Wood seems like a good candidate... good luck in finding the right tree and the right lumberjack!
In conclusion, a very thin glass protector, and a sturdy plastic bumper.
Together they'll absorb almost all the bumps, nicks, and scratches your phone will experience in its lifetime of normal use.
To get better protection, you can always dial up to a 3mm glass protector and a full-case made of TPU/Glass-Metal/Leather, but I honestly don't think it adds as much protection as it adds bulk !
To get maximum protection for those of you who work in construction on skyscrapers... get a really expensive and thick plastic case. Probably one that has a front cover too. Something not far from Otterbox/Griffin/CaseMate/Lifeproof/Seidio/etc cases. Some of these should survive a car driving over it. Meanwhile lads, enjoy wearing a purse to carry your new blunt-force weapon.
Thank you for reading, and be careful out there : l
Kawaisa said:
I quite honestly don't ever see any hard materials landing on my screen, but I do like glass protectors due to the smooth texture and scratch resistance.
I currently use a slim armor and I wouldn't trust it as much as I would if I had an UAG on it even though the slim armor isn't actually that slim...
Click to expand...
Click to collapse
Well, maybe my wording was a little off, which is why I used the "butterside down" example. I meant that if your phone drops and it drops with the screen side down, there'll always be a sharp edge close by or a stone on the ground that just sits there and waits for a phone screen to fall onto it
I also never had any sharp objects falling on my screen so far :silly:
Sorry if I expressed myself incorrectly.
Kangal said:
From all my research it seems the best protection for the Note 3 is:
MIME Feather Glass protector
+
Polycarbonate Bumper.
What...Why?!?!
Well, first of all the Note 3 has a more sensitive active digitizer and I think the capacitive sensor's been bumped up a notch.
What that means is you can use screen protectors made of glass to give the screen the extra protection it needs.
These are usually VERY protective, and if given the right conditions should last the length of the phone's lifetime (usually 2 years).
The MIME Feather is the THINNEST glass protector available, sitting at 0.15mm its not that much thicker than plastic screen protectors.
Being the thinnest it should be the weakest of the glass protectors, but like I said since glass protectors are REALLY protective it will be more than enough.
And another point to make, this uses the best materials and machining available. Its just a step up, technologically wise, than the cheap 3mm ones.
So it can actually take a beating as much as those cheap 3.3mm glass protectors (which also tank hits, and brush off scratches as nothing).
For $32... its an expensive investment, but being a one off, its probably worth it.
Bumpers.
Is it weird that the Antenna-gate scandal left us with something genius?
Having a bumper which is scratch resistant, shock proof, temperature proof, and just hands down awesome is just... awesome.
I personally don't like bumpers because I feel like they don't protect the phone's front and back-- the truth is they do.
Having a bumper which sits mostly flush on the sides ...BUT protrudes out from the front and rear angles of the phone is magic.
It means dropping the phone will ALWAYS land on the bumper, and shock absorbed, dint free, scratch prevented.
And bumping your phone will ALMOST always ding the bumper.
What this means is a good, high quality bumper can put less "FAT" on your device and still provide the same protection.
I'm all for efficiency.
And why polycarbonate/VaporMG and not Aluminium or Metal?
It doesn't matter what type of metal you have, surrounding the perimeter of the device creates some sort of "force field" a phenomenon known as Faraday Cage.
An expensive metal bumper made by a reputable company will drop ~1 bar of signal, I'm not sure if NFC and Bluetooth are affected. On top of this, not all metals are the same.
Some are poor shock conductors, and won't really protect your phone.
While TPU can get the job done, its not 100% environment/weather proof. Something like a high quality Polycarbonate (think Nikkon DSLR camera housing) will last longer than your device's lifetime, feel great/grippy, and be as protective. Leather isn't a good choice here simply because its not very sturdy (when its just a thin bumper) and won't be able to absorb as much force as these plastics and amorphous metals. Wood seems like a good candidate... good luck in finding the right tree and the right lumberjack!
In conclusion, a very thin glass protector, and a sturdy plastic bumper.
Together they'll absorb almost all the bumps, nicks, and scratches your phone will experience in its lifetime of normal use.
To get better protection, you can always dial up to a 3mm glass protector and a full-case made of TPU/Glass-Metal/Leather, but I honestly don't think it adds as much protection as it adds bulk !
To get maximum protection for those of you who work in construction on skyscrapers... get a really expensive and thick plastic case. Probably one that has a front cover too. Something not far from Otterbox/Griffin/CaseMate/Lifeproof/Seidio/etc cases. Some of these should survive a car driving over it. Meanwhile lads, enjoy wearing a purse to carry your new blunt-force weapon.
Thank you for reading, and be careful out there : l[/QUOTE
This was what i was going for.. thank you for the information.. what bumper do you use if u don't mind me asking?
Click to expand...
Click to collapse
loopers said:
This was what i was going for.. thank you for the information.. what bumper do you use if u don't mind me asking?
Click to expand...
Click to collapse
For now I've got this combo:
3mm Explosion Proof Glass
http://www.ebay.com.au/itm/181250089468?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
+
Black Matte Slim Bumper
http://www.ebay.com.au/itm/141097547867?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Next combo:
MIME Feather Glass
http://mimeusa.com/product/galaxy-note-3-feather-glass-tempered-glass-screen-protector/
+
Clear TPU Kickstand Case
http://www.ebay.com.au/itm/281194981583?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Saw another post with link to it, but here's a review of the case. It's not super bulky. But add enough protection for most
Leave questions and comments
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Bgbird68 said:
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Click to expand...
Click to collapse
I find a tempered glass screen protector under the plastic built-in one to be the best. It sits really flush this way and you can't see the halo in the glass screen protector because of the case.
Bgbird68 said:
Just got one of these. My question is to pop the included screen protector off and just go with the one that came with the Nexus or peel that one off and go with the Supcase protector. I've read reviews of people suggesting both.
This is a durable feeling and looking case. I've always had UAG cases in the past but this one seemed to offer a little more protection.
Click to expand...
Click to collapse
If you do this, make sure you after you pop the built in screen protector off you scrape off the black adhesive that held it on or it will fuse to your screen protector and rip it off if you take off your case. Any small metal tool can be used but be careful not to scratch the case. After its removed you can use some qtips and a little bit of rubbing alcohol to clean any residual adhesive.
I didn't do this originally and my case was stuck to my screen protector for 2 months till I finally decided to try and force it off and it ruined my screen protector.
I'm going to keep my supplied screen protector on along with the case screen protector.
Bgbird68 said:
I'm going to keep my supplied screen protector on along with the case screen protector.
Click to expand...
Click to collapse
Good luck, sensitivity sucks!
No problems with sensitivity so far. I like the case. Little bulky but the phone feels safe.
Bgbird68 said:
No problems with sensitivity so far. I like the case. Little bulky but the phone feels safe.
Click to expand...
Click to collapse
The edges of the screen sometimes take a few tries to respond!
I have this case. Its fantastic for work. Its awfully bulky though! But, with that bulk you get great protection.
Its great if you need the protection. I typically remove the phone from the case when I'm home.
GreenXSniper said:
If you do this, make sure you after you pop the built in screen protector off you scrape off the black adhesive that held it on or it will fuse to your screen protector and rip it off if you take off your case. Any small metal tool can be used but be careful not to scratch the case. After its removed you can use some qtips and a little bit of rubbing alcohol to clean any residual adhesive.
I didn't do this originally and my case was stuck to my screen protector for 2 months till I finally decided to try and force it off and it ruined my screen protector.
Click to expand...
Click to collapse
This is what I described doing in a different topic - used an X-Acto knife and it took about 10 minutes to get all the plastic protector's adhesive off, which I felt might stick or lift up the lip of their case on the actual screen protector I'm using.
However, I also found that the Supcase didn't sit perfectly flush on the Nexus 6 with my own screen protector after removing their plastic one - one longer side has a gap between the frame and my protected phone surface.
So, I am keeping this case as a backup, only.
- ooofest
Just got this case from EBay .I must say Dam good quality cases an holster love it..actually kind of like its design an fit better then Otterbox...feels more solid..
Had the case for a while its pretty good. Not a daily case for me as I switch when doing different jobs. It's actually kind of hard to get off that's a good thing for some people.
I've just had to return mine after using it for a few days. When taking pictures with the rear camera flash on, the flash and case don't work well together and the pictures are spoilt (first pic is with case, second without. You can see the tint that having the white case on causes). Disappointing as I have already had the screen break on me (first time ever!) and was happy of the extra protection that this case affords
For the most part I go naked with my N6. I am ordering one of these cases for when I go golfing and maybe some other activities where I want to have the best protection. I am keeping the supplied protector cause it will keep dust and water from getting on my phone. Which is, by the way, the reason I am going with this brand because most of the other "tough" cases don't have that.
How does this case fit around the speakers? Is it open letting dust in under the screen protector or are the speakers sealed?
They are open, dust can accumulate
I've been using mine for months now with no problems. only complaint is the camera port is long. Dust an small debris gets under screen protector, its slightly bulky but worth the protection. Both factory screen protector an case built-in on an notice a little touch sensitivity loss, but worth the protection! Add the fact that the N6 is water resistant an its damn near perfect!